RESUMO
Echocardiography plays an important role in the clinical diagnosis of cardiovascular diseases. Cardiac function assessment by echocardiography is a crucial process in daily cardiology. However, cardiac segmentation in echocardiography is a challenging task due to shadows and speckle noise. The traditional manual segmentation method is a time-consuming process and limited by inter-observer variability. In this paper, we present a fast and accurate echocardiographic automatic segmentation framework based on Convolutional neural networks (CNN). We propose FAUet, a segmentation method serially integrated U-Net with coordinate attention mechanism and domain feature loss from VGG19 pre-trained on the ImageNet dataset. The coordinate attention mechanism can capture long-range dependencies along one spatial direction and meanwhile preserve precise positional information along the other spatial direction. And the domain feature loss is more concerned with the topology of cardiac structures by exploiting their higher-level features. In this research, we use a two-dimensional echocardiogram (2DE) of 88 patients from two devices, Philips Epiq 7C and Mindray Resona 7T, to segment the left ventricle (LV), interventricular septal (IVS), and posterior left ventricular wall (PLVW). We also draw the gradient weighted class activation mapping (Grad-CAM) to improve the interpretability of the segmentation results. Compared with the traditional U-Net, the proposed segmentation method shows better performance. The mean Dice Score Coefficient (Dice) of LV, IVS, and PLVW of FAUet can achieve 0.932, 0.848, and 0.868, and the average Dice of the three objects can achieve 0.883. Statistical analysis showed that there is no significant difference between the segmentation results of the two devices. The proposed method can realize fast and accurate segmentation of 2DE with a low time cost. Combining coordinate attention module and feature loss with the original U-Net framework can significantly increase the performance of the algorithm.
Assuntos
Coração , Imagem Cinética por Ressonância Magnética , Ecocardiografia , Coração/diagnóstico por imagem , Ventrículos do Coração/diagnóstico por imagem , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imagem Cinética por Ressonância Magnética/métodos , Redes Neurais de ComputaçãoRESUMO
Two-dimensional (2D) nanomaterials are attracting much attention due to their excellent electronic and optical properties. Here, we report the first experimental preparation of two free-standing mercurated graphyne nanosheets via the interface-assisted bottom-up method, which integrates both the advantages of metal center and graphyne. The continuous large-area nanosheets derived from the chemical growth show the layered molecular structural arrangement, controllable thickness and enhanced π-conjugation, which result in their stable and outstanding broadband nonlinear saturable absorption (SA) properties (at both 532 and 1064â nm). The passively Q-switched (PQS) performances of these two nanosheets as the saturable absorbers are comparable to or higher than those of the state-of-the-art 2D nanomaterials (such as graphene, black phosphorus, MoS2 , γ-graphyne, etc.). Our results illustrate that the two metallated graphynes could act not only as a new class of 2D carbon-rich materials, but also as inexpensive and easily available optoelectronic materials for device fabrication.
RESUMO
STATEMENT OF PROBLEM: Conventional radiographic methods are widely used to evaluate the clinical accuracy of implant position. However, such methods require a second computerized tomography (CT) scan and manual registration between presurgical and postsurgical CT data. The alignment errors cannot be calculated. PURPOSE: The purpose of this clinical study was to introduce a completely digital registration method to evaluate the clinical accuracy of implant position. The digital registration method was then compared with the radiographic method in evaluating accuracy. Some of the alignment errors produced in the digital registration procedures were recorded. MATERIAL AND METHODS: A total of 32 implants from 19 patients with sufficient bone volume were enrolled in the study, and all implant surgeries were conducted by one experienced practitioner. Before the surgery, a cone beam computerized tomography (CBCT) scan was made for each patient along with a diagnostic impression to design the ideal implant position using the Simplant software. After the surgery, the postsurgical implant position was determined using an optical scan of the dentition cast and a series of custom registration models (the digital registration method). A simulated cylinder was designed using the Geomagic Studio software to represent the implant, and the deviation of the ideal and postsurgical implant position was calculated. The accuracy evaluated by the 2 methods was also compared. The parameters of the entrance point, apical point, and axis were recorded for each implant. A part of the alignment errors in the digital registration was calculated automatically and recorded. One sample t test and paired t test were conducted by using a statistical software program. RESULTS: The mean deviation between the ideal and postsurgical implant positions evaluated using the digital registration method was 0.84 ±0.57 mm for the entrance point, 1.03 ±0.78 mm for the apical point, and 4.52 ±2.37 degrees for the angulation. No significant difference was found between the accuracy evaluated by the digital registration method and the radiographic method (P>.05). In the digital registration procedure, the alignment error was 0.03 mm for the registration model and 0.29 mm for the dentition. Significant differences were found in the alignment procedure of the impression cylinder (P<.001) and dentition (P<.001). The average positive and negative errors were +0.09 and -0.19 mm for the simulated cylinder of the ideal implant and +0.08 and -0.15 mm for the simulated cylinder of the postsurgical implant. CONCLUSIONS: The precision of the digital registration method could be accepted in clinical applications. No significant difference was found between the digital registration method and the radiographic method in evaluating the clinical accuracy of the implant position. The digital registration method was able to control and minimize the alignment errors produced during data processing.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Próteses e Implantes , Humanos , SoftwareRESUMO
PURPOSE: This retrospective study investigates the accuracy of freehand implant placement and whether the factors of presence of an adjacent tooth, implant quadrant, number of missing teeth, and location of the implant site influence direction and angulation deviations. MATERIALS AND METHODS: According to specific inclusion and exclusion criteria, a total of 112 implants from 75 partially edentulous patients were recruited for this retrospective study. The implants were inserted using a freehand approach by one experienced clinician (right-handed). The full thickness flap was elevated to expose the alveolar bone in the implant surgery, and the implant crown consisted of an all-ceramic restoration retained by cement. The planned implant position was preoperatively determined using implant planning software. The postoperative implant position was determined by analyzing the alignment after optically scanning the dentition using a specifically designed registration model in Geomagic Studio software. The deviations between the planned and postoperative implant positions were then calculated. The outcomes included direction and angulation deviations between the planned and postoperative implant positions. All data were analyzed by ANOVA, Bonferroni correction, regression analysis, and one-sample t-tests conducted using SPSS. RESULTS: The 3D deviations between planned and postoperative implant positions were 1.22 ± 0.63 mm at the entrance point, 1.91 ± 1.17 mm at the apical point, and 7.93 ± 5.56° in angulation. The presence of adjacent teeth influenced deviations in the mesiodistal (F = 4.338, p = 0.006) and buccolingual directions (F = 3.017, p = 0.033) at the entrance point and mesiodistal angulation (F = 7.979, p < 0.001). The quadrant influenced deviation in the buccolingual direction at the apical point (F = 6.093, p = 0.001) and buccolingual angulation (F = 6.457, p < 0.001). The number of missing teeth had no effect on deviations of direction and angulation of implants. The location of the implant site affected the deviation in the buccolingual direction at the entrance point (F = 3.096, p = 0.049) and the mesiodistal direction at the apical point (F = 3.724, p = 0.027). CONCLUSION: The 3D accuracy of freehand-placed implants could be acceptable in clinical situations. The results showed that the presence of an adjacent tooth and the quadrant and the location of the implant site influenced the direction and angulation deviations of the implant position; however, the factor of number of missing teeth did not.
Assuntos
Implantes Dentários , Cirurgia Assistida por Computador , Tomografia Computadorizada de Feixe Cônico , Implantação Dentária Endóssea , Humanos , Estudos RetrospectivosRESUMO
The laser properties of Nd:YPO4 crystal were demonstrated for the first time. For a 1.2 at.% doped Nd:YPO4 crystal, the absorption cross-section at 803 nm, stimulated emission cross-section at 1063 nm, and fluorescence lifetime was measured to be 8.1 × 10-20 cm2, 1.6 × 10-19 cm2, 156 µs, respectively. With an as-grown 0.6 mm thin slice which was unpolished and uncoated, efficient diode-pumped continue-wave (CW) laser operations were realized at 1.06 and 1.3 µm wavebands. The 1063 nm output power reached 2.16 W when the absorbed pump power was 4.07 W, corresponding to an optical-to-optical efficiency of 53%, and a slope efficiency of 56.4%. The 1.3 µm laser output exhibited the simultaneous operations of dual-wavelengths, i.e. 1338 and 1347 nm. The maximum output power was 800 mW at an absorbed pump power of 3.08 W, giving an optical-to-optical efficiency of 26% and a slope efficiency of 28.2%.
RESUMO
OBJECTIVES: We aimed to explore the predictive value of four traumatic hemorrhage scores for early massive blood transfusion in trauma patients in the pre-hospital setting. METHODS: Trauma patients admitted to Shenzhen University General Hospital from July 2018 to December 2022 were included in this study. They were divided into the massive transfusion group and the non-massive transfusion group according to the blood transfusion volume within 24 h. Basic information about patients was collected. Glasgow Coma Scale (GCS), focused assessment with sonography for trauma (FAST), and injury severity score (ISS) were performed. The receiving operating characteristic (ROC) curve was used to compare the predictive value of four trauma transfusion scores for early massive blood transfusion in the pre-hospital setting. RESULTS: A total of 475 patients were enrolled, 43 received massive blood transfusions and 29 died within 24 h. The sensitivity and specificity of the four trauma hemorrhage scores in predicting the need for massive blood transfusions in trauma patients at their recommended cutoff points were all high. Among the four scores, the area under the ROC curve was larger for the assessment of blood consumption (ABC) score (0.864) and smaller for the trauma-induced coagulopathy clinical score (TICCS) score (0.795, p > 0.05). CONCLUSIONS: All four pre-hospital trauma hemorrhage scores have a high predictive value in assessing massive blood transfusion in trauma patients.
Assuntos
Transfusão de Sangue , Escala de Coma de Glasgow , Hemorragia , Escala de Gravidade do Ferimento , Valor Preditivo dos Testes , Ferimentos e Lesões , Humanos , Masculino , Feminino , Pessoa de Meia-Idade , Adulto , Ferimentos e Lesões/complicações , Ferimentos e Lesões/terapia , Hemorragia/terapia , Serviços Médicos de Emergência/métodos , China , Curva ROC , Avaliação Sonográfica Focada no Trauma , Idoso , Sensibilidade e EspecificidadeRESUMO
The niobium oxide dihalides have recently been identified as a new class of van der Waals materials exhibiting exceptionally large second-order nonlinear optical responses and robust in-plane ferroelectricity. In contrast to second-order nonlinear processes, third-order optical nonlinearities can arise irrespective of whether a crystal lattice is centrosymmetric. Here, we report third harmonic generation (THG) in two-dimensional (2D) transition metal oxide iodides, namely NbOI2 and TaOI2. We observe a comparable THG intensity from both materials. By benchmarking against THG from monolayer WS2, we deduce that the third-order susceptibility is approximately on the same order. THG resonances are revealed at different excitation wavelengths, likely due to enhancement by excitonic states and band edge resonances. The THG intensity increases for material thicknesses up to 30 nm, owing to weak interlayer coupling. After this threshold, it shows saturation or a decrease, due to optical interference effects. Our results establish niobium and tantalum oxide iodides as promising 2D materials for third-order nonlinear optics, with intrinsic in-plane ferroelectricity and thickness-tunable nonlinear efficiency.
RESUMO
The essential role of the neural network in enhancing bone regeneration has often been overlooked in biomaterial design, leading to delayed or compromised bone healing. Engineered mesenchymal stem cells (MSCs)-derived exosomes are becoming increasingly recognized as potent cell-free agents for manipulating cellular behavior and improving therapeutic effectiveness. Herein, MSCs are stimulated with nerve growth factor (NGF) to regulate exosomal cargoes to improve neuro-promotive potential and facilitate innervated bone regeneration. In vitro cell experiments showed that the NGF-stimulated MSCs-derived exosomes (N-Exos) obviously improved the cellular function and neurotrophic effects of the neural cells, and consequently, the osteogenic potential of the osteo-reparative cells. Bioinformatic analysis by miRNA sequencing and pathway enrichment revealed that the beneficial effects of N-Exos may partly be ascribed to the NGF-elicited multicomponent exosomal miRNAs and the subsequent regulation and activation of the MAPK and PI3K-Akt signaling pathways. On this basis, N-Exos were delivered on the micropores of the 3D-printed hierarchical porous scaffold to accomplish the sustained release profile and extended bioavailability. In a rat model with a distal femoral defect, the N-Exos-functionalized hierarchical porous scaffold significantly induced neurovascular structure formation and innervated bone regeneration. This study provided a feasible strategy to modulate the functional cargoes of MSCs-derived exosomes to acquire desirable neuro-promotive and osteogenic potential. Furthermore, the developed N-Exos-functionalized hierarchical porous scaffold may represent a promising neurovascular-promotive bone reparative scaffold for clinical translation.
Assuntos
Exossomos , Células-Tronco Mesenquimais , Ratos , Animais , Exossomos/metabolismo , Diferenciação Celular/genética , Porosidade , Fosfatidilinositol 3-Quinases , Fator de Crescimento Neural/análise , Fator de Crescimento Neural/metabolismo , Fator de Crescimento Neural/farmacologia , Regeneração Óssea/fisiologia , Osteogênese , Impressão TridimensionalRESUMO
PURPOSE: The aim of this study was to introduce a new method to evaluate the clinical accuracy of implant position. The results were compared to traditional cone beam CT (CBCT) method. METHODS: A total of 36 implants from 24 patients with sufficient bone volume were enrolled into the study. CBCT method and digital registration method were compared to evaluate the accuracy of implant position. The measurement parameters were defined as deviations between ideal and postsurgical implant position at occlusal point(d1), apical point(d2) and axis(α). The deviations between two methods were analyzed with SPSS 19.0 software package. RESULTS: The deviations between ideal and postsurgical implant position using CBCT were (0.88±0.64) mm for occlusal point, (1.07±0.85) mm for apical point and (4.74±2.35)° for angle. In digital registration method, the deviations were (0.86±0.67) mm for occlusal point, (1.12±0.88) mm for apical point and (4.56±2.66)° for angle. No significant difference(Pï¼0.05) was found between the two methods. CONCLUSIONS: There was no significant difference between the two methods in evaluating the clinical accuracy of implant position. Digital registration method could be accepted in clinical application.
Assuntos
Implantes Dentários , Cirurgia Assistida por Computador , Humanos , Cirurgia Assistida por Computador/métodos , Implantação Dentária Endóssea/métodos , Tomografia Computadorizada de Feixe Cônico/métodos , Imageamento Tridimensional , Desenho Assistido por ComputadorRESUMO
This study aimed to identify features of breast intraductal lesions in photoacoustic/ultrasound (PA/US) imaging and compare PA/US with color Doppler flow/ultrasound (CDFI/US) in the evaluation of breast intraductal lesions. In the nine patients with 10 breast intraductal lesions and 8 patients with 8 benign lesions, total vessel scores evaluated from PA/US are significantly greater than those from CDFI/US (p=0.005). PA internal vessel scores and oxygen saturation (SO2) score are significantly increased in breast intraductal lesions than in benign lesions (p=0.016, p=0.006). With a cutoff PA score (sum of PA internal vessel score and SO2 score) of 2.5, we obtained a sensitivity of 90% and a specificity of 87.5% in differentiation of two groups. PA/US upgraded 40% of breast intraductal lesions, and downgraded 50% of benign lesions from the Breast Imaging Reporting and Data System grading results based on CDFI/US. PA/US functional imaging has the potential in differentiating breast intraductal lesions.
RESUMO
With an sp2-hybridized carbon atom structure, graphene is recognized as a nonlinear absorption (NLA) material, which has motivated scientists to explore new allotropes of carbon. Different from graphene, graphdiyne (GDY) consists of sp- and sp2-hybridized carbon atoms. An sp-hybridized carbon-carbon triple bond structure will bring in novel nonlinear optical properties, which are different from other allotropes of carbon. In this study, we investigated the broadband NLA properties (ultraviolet-infrared waveband) of GDY nanosheets, exfoliated using a liquid-phase exfoliation (LPE) method. The short ultraviolet cut-off wavelength (around 200 nm-220 nm) forebodes the potential application of GDY as an ultraviolet optical material. The outstanding NLA resulting in an ultraviolet waveband attests that the GDY nanosheets are veritable ultraviolet NLA materials, which have potential applications in ultraviolet optics. Our study broadens the application scopes of nanomaterials.
RESUMO
Owing to the heavy health burdens from rheumatoid arthritis, a sensitive and objective imaging method is needed for early diagnosis and accurate evaluation of the disease. We aimed to fabricate vascular epithelial growth factor (VEGF)-targeted microbubbles (MBs) to evaluate the expression levels of VEGF within the inflammatory lesions of rats with adjuvant-induced arthritis (AIA) using a multimodal photoacoustic (PA)/ultrasound (US) imaging system. Fluorescein isothiocyanate-biotin double-labeled vascular endothelial growth factor receptor 2 antibodies and Cy5.5-biotin double-labeled VEGF2 antibodies were added to the avidin-labeled MBs to synthesize VEGF-targeted MBs. The antibodies could specifically bind to the MBs according to the flow cytometry and fluorescence imaging. In vitro experiments on the cellular uptake of the target MBs also validated the interaction of the VEGF antibodies and the MBs. Multimodal contrast-enhanced US (CEUS)/PA imaging was performed in sequence on the inflamed paws of the AIA rats with a single PA/US imaging system after the injection of the targeted MBs. The CEUS and PA signals were then quantified and verified by the pathologic results. A CEUS pattern of fast wash in and slow washout was observed in the AIA rats after injection of targeted MBs. Compared with AIA rats injected with unconnected VEGF antibodies and naked MBs, AIA rats injected with targeted MBs presented a higher peak intensity (p = 0.0079 and 0.0079 respectively) and a longer time to peak (p = 0.0117 and 0.0117, respectively). The PA signals were also significantly enhanced after injection of targeted MBs (p = 0.0112 and 0.0119, respectively), which was in accordance with the pathologic and immunohistochemical results. In conclusion, VEGF-targeted MBs can be used as agents for multimodal CEUS/PA imaging and to detect VEGF expression in the inflammatory lesions of AIA rats in vivo. This strategy may be useful in imaging evaluation of arthritis by identifying inflammation-related molecules in different imaging modes.
Assuntos
Artrite/diagnóstico por imagem , Meios de Contraste , Microbolhas , Técnicas Fotoacústicas/métodos , Animais , Anticorpos/administração & dosagem , Modelos Animais de Doenças , Feminino , Corantes Fluorescentes , Imagem Multimodal , Ratos , Ratos Wistar , Ultrassonografia/métodos , Fator A de Crescimento do Endotélio Vascular/imunologiaRESUMO
Two dimensional (2D) Group-VI Te, tellurene, was successfully exfoliated using a liquid phase exfoliation (LPE) method. The prepared tellurene nanosheets possessed a thickness of 4.3-4.6 nm and the lateral dimension ranged from hundreds of nanometers to several microns. The broadband nonlinear absorption properties were explored for the first time (as we know) using a z-scan method with the laser photon energy in the range of 0.73-2.76 eV, corresponding to the near-infrared-visible waveband. Tellurene nanosheets exhibited excellent broadband saturated absorption and optical limiting behaviors. The low saturable intensity and the large modulation depth for saturated absorption with low energy photon excitation highlight the superiority of the infrared band as a saturable absorber. In addition, with large energy excitation, tellurene manifested an apparent two photon absorption behavior in the visible band, thus it can be used as an optical limiting material. By adopting the mode-locking technique, this high-quality saturable absorber can be applied in all-solid-state or fiber lasers to generate ultra-short and ultra-high peak power laser pulses. Meanwhile, tellurene as an optical limiting material can protect the sensitive optical devices and human eyes. So, our work not only demonstrates that tellurene is a promising broadband nonlinear optical material, but also implies its application prospects in optics.
RESUMO
Biological functions of hybridized carbon nanofibers (CNFs) depend closely on the incorporated bioactive components. For hybridized CNFs containing bioactive glass (BG) nanoparticles (CNF/BG), chemical compositions of BG nanoparticles might have decisive effects on their cell affinity and osteocompatibility. Herein, three hybridized CNF/BGs were produced by incorporating 68S-type BG nanoparticles with different Ca/P molar ratios (1.0, 1.67 or 2.5) into CNFs via a sol-gel/electrospinning and carbonization method. Structural evolution of these hybridized CNF/BGs was studied in relation to their Ca/P molar ratios. Crystalline wollastonite was found to be the dominant phase at a high feeding Ca/P molar ratio (i.e. 2.5), but weak crystallized hydroxyapatite was the main phase at the low feeding Ca/P molar ratio (i.e. 1.0). These findings were correlated to the biological functions of the resulted CNF/BG hybrids including apatite formation ability in simulated body fluid and osteoblast behaviors in in vitro culture. All the CNF/BG hybrids displayed a strong affinity for inducing apatite deposition, showing insignificant difference after the initial nucleation stage, while they behaved differently in promoting the proliferation and osteogenic differentiation of osteoblasts. The fastest proliferation rate and the highest expression of alkaline phosphatase activity was found on the CNF/BG (Ca/P = 1.0). The results suggested a feasible way to upregulate osteoblast behaviors is by changing the feeding Ca/P molar ratios in the preparation of CNF/BG hybrids for potential bone repairing applications.
Assuntos
Materiais Biocompatíveis/química , Carbono/química , Vidro/química , Nanopartículas/química , Células 3T3 , Animais , Apatitas/química , Regeneração Óssea , Substitutos Ósseos/química , Cálcio/química , Diferenciação Celular , Humanos , Teste de Materiais , Camundongos , Nanofibras/química , Osteoblastos/citologia , Osteoblastos/fisiologia , Osteogênese , Fósforo/química , Engenharia Tecidual/métodosRESUMO
PURPOSE: The purpose of the study was to investigate the clinical effect and implementation method of mandibular molar implantation using a CT machine combined with Simplant software so as to provide a safer and more reliable method for preoperative preparation of mandibular molar implantation. METHODS: CT/cone-beam CT (CBCT) examinations were applied among 10 cases selected into the study. The Simplant software was used to measure the distances between implantation point center and superior wall of inferior alveolar nerve canal (H1), buccolingual diameter (H2), mesiodistal diameter (H3), ginginal thickness(H4) and occlusal distance (H5). Simplant software was also applied to calculate the bone mineral density of implantation areas and trace the inferior alveolar nerve canal. RESULTS: H1 was between 10.7 mm-17.6 mm, H3 was between 5.4mm-8.3mm.The 10 selected cases undertook implantations according to the results of simulation and all of them succeed after a one year's clinical follow-up. CONCLUSIONS: According to its accuracy in measuring data of the implantation area, Simplant software can be routinely used in preoperative preparation of mandibular molar implantation, which will make the process safer and more controllable.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Implantes Dentários , Dente Molar , Software , Densidade Óssea , Humanos , Nervo MandibularRESUMO
Bioactive glass (BG)-containing carbon nanofibers (CNFs) are promising orthopaedic biomaterials. Herein, CNF composites were produced from electrospinning of polyacrylonitrile (PAN)/BG sol-gel precursor solution, followed by carbonization. Choosing 58S-type BG (mol%: 58.0% SiO2-26.3% CaO-15.7% P2O5) as the model, micro-structural evolution of CNF/BG composites was systematically evaluated in relating to aging times of BG precursor solution. With aging time prolonging, BG precursors underwent morphological changes from small sol clusters with loosely and randomly branched structure to highly crosslinked Si-network structure, showing continuous increase in solution viscosity. BG precursor solution with low viscosity could mix well with PAN solution, resulting in CNF composite with homogeneously distributed BG component. Whereas, BG precursor gel with densely crosslinked Si-network structure led to uneven distribution of BG component along final CNFs due to its significant phase separation from PAN component. Meanwhile, BG nanoparticles in CNFs demonstrated micro-structural evolution that they transited from weak to strong crystal state along with longer aging time. Biomineralization in simulated body fluid and in vitro osteoblasts proliferation were then applied to determine the bioactivity of CNF/BG composites. CNF/BG composites prepared from shorter aging time could induce both faster apatite deposition and cell proliferation rate. It was suggested weakly crystallized BG nanoparticles along CNFs dissolved fast and was able to provide numerous nucleation sites for apatite deposition, which also favored the proliferation of osteoblasts cells. Aging time could thus be a useful tool to regulate the biological features of CNF/BG composites.
Assuntos
Carbono/química , Vidro/química , Nanofibras/química , Células 3T3 , Animais , Apatitas/química , Proliferação de Células , Teste de Materiais , CamundongosRESUMO
Bioactive glass (BG) decorated nanoporous composite carbon nanofibers (PCNF-BG) were prepared for the purpose of obtaining effective substrates for skeletal tissue regeneration. The preparation was conducted by electrospinning of polyacrylonitrile (PAN)-polymethylmethacrylate (PMMA) blends with the addition of sol-gel precursors of 58s-type (mol%: 58% SiO2-38% CaO-4% P2O5) BG, followed by high temperature thermal treatment. The removal of PMMA during the carbonization of PAN generated numerous slit-like nanoporous structures along CNFs, leading to a significant enhancement in the specific surface area, surface roughness and pore volume, which was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) characterizations. PCNF-BG composites with different specific surface areas were biologically evaluated by experiments of biomineralization in simulated body fluid (SBF), in vitro MC3T3-E1 osteoblast proliferation and osteogenic differentiation. Compared to non-porous CNF/BG, the nanoporous structure distinctively enlarged the interfacial reaction area of the BG component with a medium environment and thus enhanced the bioactivity of CNFs by accelerating the dissolution of the BG component and providing abundant nucleation sites for hydroxyapatite depositions. The released ions displayed distinct promotion in proliferation and osteogenic differentiation of osteoblast cells, which promoted the osteocompatibility of carbon-based materials significantly.