Steering lithium and potassium storage mechanism in covalent organic frameworks by incorporating transition metal single atoms.

Organic electrodes mainly consisting of C, O, H, and N are promising candidates for advanced batteries. However, the sluggish ionic and electronic conductivity limit the full play of their high theoretical capacities. Here, we integrate the idea of metal-support interaction in single-atom catalysts with π-d hybridization into the design of organic electrode materials for the applications of lithium (LIBs) and potassium-ion batteries (PIBs). Several types of transition metal single atoms (e.g., Co, Ni, Fe) with π-d hybridization are incorporated into the semiconducting covalent organic framework (COF) composite. Single atoms favorably modify the energy band structure and improve the electronic conductivity of COF. More importantly, the electronic interaction between single atoms and COF adjusts the binding affinity and modifies ion traffic between Li/K ions and the active organic units of COFs as evidenced by extensive in situ and ex situ characterizations and theoretical calculations. The corresponding LIB achieves a high reversible capacity of 1,023.0 mA h g-1 after 100 cycles at 100 mA g-1 and 501.1 mA h g-1 after 500 cycles at 1,000 mA g-1. The corresponding PIB delivers a high reversible capacity of 449.0 mA h g-1 at 100 mA g-1 after 150 cycles and stably cycled over 500 cycles at 1,000 mA g-1. This work provides a promising route to engineering organic electrodes.

In Situ Phase-Transformation Forming a Bicontinuous (Ni, Co, Ti, and Al)-Oxide/Li2CO3 Interpenetrating Network Electrolyte for Solid Oxide Fuel Cells.

Designing heterogeneous electrolytes with superior interface charge transfer is promising for low-temperature solid oxide fuel cells (LT-SOFCs). However, a rational construction with optimal interfaces to maximize ionic conduction remains a challenge. Here an in situ phase-transformation strategy is demonstrated to prepare a highly conductive heterogeneous electrolyte. A pristine LiNiO2-TiO2 nanocomposite precursor undergoes chemical reactions and phase-transformation upon heating and feeding H2, destroying the original phases, and forming new species, including an amorphous Li2CO3 scaffold within a (Ni, Co, Al, and Ti)-oxide (NCAT) matrix. It creates an intertwining and continuous network inside the electrolyte with plentiful interfaces. The in situ formed NCAT/Li2CO3 heterogeneous electrolyte displays superior ionic conductivity and impressive fuel cell performance. This work emphasizes the potential of rational heterogeneous structure design and interface engineering for LT-SOFC electrolyte through an in situ phase-transform approach. The generated interfaces enhance ion transport, presenting an opportunity for further optimizing electrolyte candidates, and lowering the operating temperatures of SOFCs.

Atomic-Scale Cryo-TEM Studies of the Electrochemistry of Redox Mediator in Li-O2 Batteries.

Rechargeable aprotic lithium (Li)-oxygen battery (LOB) is a potential next-generation energy storage technology because of its high theoretical specific energy. However, the role of redox mediator on the oxide electrochemistry remains unclear. This is partly due to the intrinsic complexity of the battery chemistry and the lack of in-depth studies of oxygen electrodes at the atomic level by reliable techniques. Herein, cryo-transmission electron microscopy (cryo-TEM) is used to study how the redox mediator LiI affects the oxygen electrochemistry in LOBs. It is revealed that with or without LiI in the electrolyte, the discharge products are plate-like LiOH or toroidal Li2 O2 , respectively. The I2 assists the decomposition of LiOH via the formation of LiIO3 in the charge process. In addition, a LiI protective layer is formed on the Li anode surface by the shuttle of I3 - , which inhibits the parasitic Li/electrolyte reaction and improves the cycle performance of the LOBs. The LOBs returned to 2e- oxygen reduction reaction (ORR) to produce Li2 O2 after the LiI in the electrolyte is consumed. This work provides new insight on the role of redox mediator on the complex electrochemistry in LOBs which may aid the design LOBs for practical applications.

Revealing Na+-coordination induced Failure Mechanism of Metal Sulfide Anode for Sodium Ion Batteries.

Metal sulfide (MS) is regarded as a promising candidate of the anode materials for sodium-ion battery (SIB) with ideal capacity and low cost, yet still suffers from the inferior cycling stability and voltage degradation. Herein, the coordination relationship between the discharge product Na2S with the Na+ (NaPF6) in the electrolyte, is revealed as the root cause for the cycling failure of MS. Na+-coordination effect assistants the dissolution of Na2S, further delocalizing Na2S from the reaction interface under the function of electric field, which leads to the solo oxidation of the discharge product element metal without the participation of Na2S. Besides, the higher highest occupied molecular orbital of Na2S suggest the facilitated Na2S solo oxidation to produce sodium polysulfides (NaPSs). Based on these, lowering the Na+ concentration of the electrolyte is proposed as a potential improvement strategy to change the coordination environment of Na2S, suppressing the side reactions of the solo-oxidation of element metal and Na2S. Consequently, the enhanced conversion reaction reversibility and prolonged cycle life are achieved. This work renders in-depth perception of failure mechanism and inspiration for realizing advanced conversion-type anode.

MoS2 Hollow Multishelled Nanospheres Doped Fe Single Atoms Capable of Fast Phase Transformation for Fast-charging Na-ion Batteries.

Low Na+ and electron diffusion kinetics severely restrain the rate capability of MoS2 as anode for sodium-ion batteries (SIBs). Slow phase transitions between 2H and 1T, and from NaxMoS2 to Mo and Na2S as well as the volume change during cycling, induce a poor cycling stability. Herein, an original Fe single atom doped MoS2 hollow multishelled structure (HoMS) is designed for the first time to address the above challenges. The Fe single atom in MoS2 promotes the electron transfer, companying with shortened charge diffusion path from unique HoMS, thereby achieving excellent rate capability. The strong adsorption with Na+ and self-catalysis of Fe single atom facilitates the reversible conversion between 2H and 1T, and from NaxMoS2 to Mo and Na2S. Moreover, the buffering effect of HoMS on volume change during cycling improves the cyclic stability. Consequently, the Fe single atom doped MoS2 quadruple-shelled sphere exhibits a high specific capacity of 213.3 mAh g-1 at an ultrahigh current density of 30 A g-1, which is superior to previously-reported results. Even at 5 A g-1, 259.4 mAh g-1 (83.68 %) was reserved after 500 cycles. Such elaborate catalytic site decorated HoMS is also promising to realize other "fast-charging" high-energy-density rechargeable batteries.

Lithium Hydride in the Solid Electrolyte Interphase of Lithium-Ion Batteries as a Pulverization Accelerator of Silicon.

As a highly promising next-generation high-specific capacity anode, the industrial-scale utilization of micron silicon has been hindered by the issue of pulverization during cycling. Although numerous studies have demonstrated the effectiveness of regulating the inorganic components of the solid electrolyte interphase (SEI) in improving pulverization, the evolution of most key inorganic components in the SEI and their correlation with silicon failure mechanisms remain ambiguous. This study provides a clear and direct correlation between the lithium hydride (LiH) in the SEI and the degree of micron silicon pulverization in the battery system. The reverse lithiation behavior of LiH on micron silicon during de-lithiation exacerbates the localized stress in silicon particles and contributes to particle pulverization. This work successfully proposes a novel approach to decouple the SEI from electrochemical performance, which can be significant to decipher the evolution of critical SEI components at varied battery anode interfaces and analyze their corresponding failure mechanisms.

Unraveling the Reaction Mystery of Li and Na with Dry Air.

Li and Na metals with high energy density are promising in application in rechargeable batteries but suffer from degradation in the ambient atmosphere. The phenomenon that in terms of kinetics, Li is stable but Na is unstable in dry air has not been fully understood. Here, we use in situ environmental transmission electron microscopy combined with theoretical simulations and reveal that the different stabilities in dry air for Li and Na are reflected by the formation of compact Li2O layers on Li metal, while porous and rough Na2O/Na2O2 layers on Na metal are a consequence of the different thermodynamic and kinetics in O2. It is shown that a preformed carbonate layer can change the kinetics of Na toward an anticorrosive behavior. Our study provides a deeper understanding of the often-overlooked chemical reactions with environmental gases and enhances the electrochemical performance of Li and Na by controlling interfacial stability.

Building Negative-Thermal-Expansion Protective Layers on the Grain Boundary of Ni-rich Cathodes Enables Safe and Durable High Voltage Lithium-Ion Batteries.

Ni-rich layered oxide cathode materials demonstrate high energy densities for Li-ion batteries, but the electrochemically driven thermal runaway and mechanical degradation remain their long-standing challenges in practical applications. Herein, it presents a novel ZrV2 O7  (ZVO) coating with negative thermal expansion properties along the secondary particles and primary particle grain boundaries (GBs), to simultaneously enhance the structural and thermal stability of LiNi0.8 Co0.1 Mn0.1 O2 (NCM811). It unveils that, such an architecture can significantly enhance the electronic conductivity, suppress the microcracks of GBs, alleviate the layered to spinel/rock-salt phase transformation, and meanwhile relieve the lattice oxygen loss by increasing the oxygen vacancy formation energy increased (1.43 vs 1.90 eV). Consequently, the ZVO-coated NCM811 material demonstrates a remarkable cyclability with 86.5% capacity retention after 100 cycles, and an outstanding rate performance of 30 C under a high-voltage of 4.6 V, outperforming the state-of-the-art literature. More importantly, the Li+ transportation can be readily blocked at 120 °C by the negative-thermal-expansion ZVO coating, thus avoiding the high-temperature thermal runaway.

Multiscale Structural Engineering of Sulfur/Carbon Cathodes Enables High Performance All-Solid-State LiS Batteries.

Constructing all-solid-state lithium-sulfur batteries (ASSLSBs) cathodes with efficient charge transport and mechanical flexibility is challenging but critical for the practical applications of ASSLSBs. Herein, a multiscale structural engineering of sulfur/carbon composites is reported, where ultrasmall sulfur nanocrystals are homogeneously anchored on the two sides of graphene layers with strong SC bonds (denoted as S@EG) in chunky expanded graphite particles via vapor deposition method. After mixing with Li9.54 Si1.74 P1.44 S11.7 Cl0.3 (LSPSCL) solid electrolytes (SEs), the fabricated S@EG-LSPSCL cathode with interconnected "Bacon and cheese sandwich" feature can simultaneously enhance electrochemical reactivity, charge transport, and chemomechanical stability due to the synergistic atomic, nanoscopic and microscopic structural engineering. The assembled InLi/LSPSCL/S@EG-LSPSCL ASSLSBs demonstrate ultralong cycling stability over 2400 cycles with 100% capacity retention at 1 C, and a record-high areal capacity of 14.0 mAh cm-2 at a record-breaking sulfur loading of 8.9 mg cm-2 at room temperature as well as high capacities with capacity retentions of ≈100% after 600 cycles at 0 and 60 °C. Multiscale structural engineered sulfur/carbon cathode has great potential to enable high-performance ASSLSBs for energy storage applications.

Size-Dependent Chemomechanical Failure of Sulfide Solid Electrolyte Particles during Electrochemical Reaction with Lithium.

The very high ionic conductivity of Li10GeP2S12 (LGPS) solid electrolyte (SE) makes it a promising candidate SE for solid-state batteries in electrical vehicles. However, chemomechanical failure, whose mechanism remains unclear, has plagued its widespread applications. Here, we report in situ imaging lithiation-induced failure of LGPS SE. We revealed a strong size effect in the chemomechanical failure of LGPS particles: namely, when the particle size is greater than 3 µm, fracture/pulverization occurred; when the particle size is between 1 and 3 µm, microcracks emerged; when the particle size is less than 1 µm, no chemomechanical failure was observed. This strong size effect is interpreted by the interplay between elastic energy storage and dissipation. Our finding has important implications for the design of high-performance LGPS SE, for example, by reducing the particle size to less than 1 µm the chemomechanical failure of LGPS SE can be mitigated.

Grain Boundary Electronic Insulation for High-Performance All-Solid-State Lithium Batteries.

Sulfide electrolytes with high ionic conductivities are one of the most highly sought for all-solid-state lithium batteries (ASSLBs). However, the non-negligible electronic conductivities of sulfide electrolytes (≈10-8  S cm-1 ) lead to electron smooth transport through the sulfide electrolyte pellets, resulting in Li dendrite directly depositing at the grain boundaries (GBs) and serious self-discharge. Here, a grain-boundary electronic insulation (GBEI) strategy is proposed to block electron transport across the GBs, enabling Li-Li symmetric cells with 30 times longer cycling life and Li-LiCoO2 full cells with three times lower self-discharging rate than pristine sulfide electrolytes. The Li-LiCoO2 ASSLBs deliver high capacity retention of 80 % at 650 cycles and stable cycling performance for over 2600 cycles at 0.5 mA cm-2 . The innovation of the GBEI strategy provides a new direction to pursue high-performance ASSLBs via tailoring the electronic conductivity.

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.

Replacing liquid electrolytes with solid polymer electrolytes (SPEs) is considered as a vital approach to developing sulfur (S)-based cathodes. However, the polysulfides shuttle and the growth of lithium (Li) dendrites are still the major challenges in polyethylene oxide (PEO)-based electrolyte. Here, an all-solid-state Li metal battery with flexible PEO-Li10 Si0.3 PS6.7 Cl1.8 (LSPSCl)-C-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) composite cathode (FCC) and PEO-LSPSCl-LiTFSI composite electrolyte (S-CPE) is designed. The initial capacity of the Li|S-CPE|FCC battery is 414 mAh g-1 with 97.8% capacity retention after 100 cycles at 0.1 A g-1 . Moreover, the battery displays remarkable capacity retention of 80% after 500 cycles at 0.4 A g-1 . Cryo-transmission electron microscopy (Cryo-TEM) reveals rich large-sized Li2 CO3 particles at the Li/PEO interface blocking the Li+ transport, but the layer with rich Li2 O nanocrystals, amorphous LiF and Li2 S at the Li/S-CPE interface suppresses the growth of lithium dendrite and stabilizes the interface. In situ optical microscopy demonstrates that the excellent cyclic stability of FCC is ascribed to the reversible shuttle of P-S-P species, resulting from the movement of ether backbone in PEO. This study provides strategies to mitigate the polysulfide shuttle effect and Li dendrite formation in designing high energy density solid-state Li-S-based batteries.

Exploiting the Iron Difluoride Electrochemistry by Constructing Hierarchical Electron Pathways and Cathode Electrolyte Interface.

Conversion-type cathodes such as metal fluorides, especially FeF2 and FeF3 , are potential candidates to replace intercalation cathodes for the next generation of lithium ion batteries. However, the application of iron fluorides is impeded by their poor electronic conductivity, iron/fluorine dissolution, and unstable cathode electrolyte interfaces (CEIs). A facile route to fabricate a mechanical strong electrode with hierarchical electron pathways for FeF2 nanoparticles is reported here. The FeF2 /Li cell demonstrates remarkable cycle performances with a capacity of 300 mAh g-1 after a record long 4500 cycles at 1C. Meanwhile, a record stable high area capacity of over 6 mAh cm-2 is achieved. Furthermore, ultra-high rate capabilities at 20C and 6C for electrodes with low and high mass loading, respectively, are attained. Advanced electron microscopy reveals the formation of stable CEIs. The results demonstrate that the construction of viable electronic connections and favorable CEIs are the key to boost the electrochemical performances of FeF2 cathode.

Lithium Deposition-Induced Fracture of Carbon Nanotubes and Its Implication to Solid-State Batteries.

The increasing demand for safe and dense energy storage has shifted research focus from liquid electrolyte-based Li-ion batteries toward solid-state batteries (SSBs). However, the application of SSBs is impeded by uncontrollable Li dendrite growth and short circuiting, the mechanism of which remains elusive. Herein, we conceptualize a scheme to visualize Li deposition in the confined space inside carbon nanotubes (CNTs) to mimic Li deposition dynamics inside solid electrolyte (SE) cracks, where the high-strength CNT walls mimic the mechanically strong SEs. We observed that the deposited Li propagates as a creeping solid in the CNTs, presenting an effective pathway for stress relaxation. When the stress-relaxation pathway is blocked, the Li deposition-induced stress reaches the gigapascal level and causes CNT fracture. Mechanics analysis suggests that interfacial lithiophilicity critically governs Li deposition dynamics and stress relaxation. Our study offers critical strategies for suppressing Li dendritic growth and constructing high-energy-density, electrochemically and mechanically robust SSBs.

In Situ TEM Studies of Sodium Polysulfides Electrochemistry in High Temperature Na-S Nanobatteries.

Understanding polysulfide electrochemistry in high temperature sodium-sulfur (HT-Na-S) batteries is crucial for their practical applications. Currently the discharge capacity of commercial HT-Na-S battery achieves only one third of its theoretical capacity due to polysulfides formation, understanding of which is limited due to technical difficulty in direct imaging polysulfides. Herein, in situ transmission electron microscopy implemented with a microelectromechanical systems (MEMS) heating device is used to investigate the electrochemical reactions of HT-Na-S batteries. The formation and evolution of transient polysulfides during cycling are revealed in real-time. Upon discharge, sulfur transforms to long-chain polysulfides, short-chain polysulfides, and finally Na2 S or its mixture with polysulfides, and the process is reversible during charge at high temperatures. Surprisingly, by introducing nanovoids into the sulfur cathode to buffer the large volume change thus preserving the integrity of the electronic/ionic pathways and reducing the diffusion distance of Na+ ions, the sulfur cathode is fully discharged to Na2 S rather than the conventionally observed Na2 S2 at 300 °C. Moreover, the electrochemical reaction is swift and highly reversible. The in situ studies provide not only new understanding to the polysulfide electrochemistry, but also critical strategies to boost the capacity and cyclability of HT-Na-S batteries for large-scale energy storage applications.

Nasal administration of mesenchymal stem cells reverses chemotherapy-induced peripheral neuropathy in mice.

Chemotherapy-induced peripheral neuropathy (CIPN) is one of the most frequently reported adverse effects of cancer treatment. CIPN often persists long after treatment completion and has detrimental effects on patient's quality of life. There are no efficacious FDA-approved drugs for CIPN. We recently demonstrated that nasal administration of mesenchymal stem cells (MSC) reverses the cognitive deficits induced by cisplatin in mice. Here we show that nasal administration of MSC after cisplatin- or paclitaxel treatment- completely reverses signs of established CIPN, including mechanical allodynia, spontaneous pain, and loss of intraepidermal nerve fibers (IENF) in the paw. The resolution of CIPN is associated with normalization of the cisplatin-induced decrease in mitochondrial bioenergetics in DRG neurons. Nasally administered MSC enter rapidly the meninges of the brain, spinal cord and peripheral lymph nodes to promote IL-10 production by macrophages. MSC-mediated resolution of mechanical allodynia, recovery of IENFs and restoration of DRG mitochondrial function critically depends on IL-10 production. MSC from IL-10 knockout animals are not capable of reversing the symptoms of CIPN. Moreover, WT MSC do not reverse CIPN in mice lacking IL-10 receptors on peripheral sensory neurons. In conclusion, only two nasal administrations of MSC fully reverse CIPN and the associated mitochondrial abnormalities via an IL-10 dependent pathway. Since MSC are already applied clinically, we propose that nasal MSC treatment could become a powerful treatment for the large group of patients suffering from neurotoxicities of cancer treatment.

A Coral-Like FeP@NC Anode with Increasing Cycle Capacity for Sodium-Ion and Lithium-Ion Batteries Induced by Particle Refinement.

We present a coral-like FeP composite with FeP nanoparticles anchored and dispersed on a nitrogen-doped 3D carbon framework (FeP@NC). Due to the highly continuous N-doped carbon framework and a spring-buffering graphitized carbon layer around the FeP nanoparticle, a sodium-ion battery with the FeP@NC composite exhibits an ultra-stable cycling performance at 10 A g-1 with a capacity retention of 82.0 % in 10 000 cycles. Also, particle refinement leads to a capacity increase during cycling. The FeP nanoparticles go through a refining-recombination process during the first cycle and present a global refining trend after dozens of cycles, which results in a gradually increase in graphitization degree and interface magnetization, and further provides more active sites for Na+ storage and contributes to a rising capacity with cycling. The capacity ascending phenomenon can also extend to lithium-ion batteries.

In Situ TEM Observations of Discharging/Charging of Solid-State Lithium-Sulfur Batteries at High Temperatures.

Understanding the structural evolution of Li2 S upon operation of lithium-sulfur (Li-S) batteries is inadequate and a complete decomposition of Li2 S during charge is difficult. Whether it is the low electronic conductivity or the low ionic conductivity of Li2 S that inhibits its decomposition is under debate. Furthermore, the decomposition pathway of Li2 S is also unclear. Herein, an in situ transmission electron microscopy (TEM) technique implemented with a microelectromechanical systems (MEMS) heating device is used to study the precipitation and decomposition of Li2 S at high temperatures. It is revealed that Li2 S transformed from an amorphous/nanocrystalline to polycrystalline state with proceeding of the electrochemical lithiation at room temperature (RT), and the precipitation of Li2 S is more complete at elevated temperatures than at RT. Moreover, the decomposition of Li2 S that is difficult to achieve at RT becomes facile with increased Li+ ion conduction at high temperatures. These results indicate that Li+ ion diffusion in Li2 S dominates its reversibility in the solid-state Li-S batteries. This work not only demonstrates the powerful capabilities of combining in situ TEM with a MEMS heating device to explore the basic science in energy storage materials at high temperatures but also introduces the factor of temperature to boost battery performance.

In Situ Imaging the Oxygen Reduction Reactions of Solid State Na-O2 Batteries with CuO Nanowires as the Air Cathode.

We report real time imaging of the oxygen reduction reactions (ORRs) in all solid state sodium oxygen batteries (SOBs) with CuO nanowires (NWs) as the air cathode in an aberration-corrected environmental transmission electron microscope under an oxygen environment. The ORR occurred in a distinct two-step reaction, namely, a first conversion reaction followed by a second multiple ORR. In the former, CuO was first converted to Cu2O and then to Cu; in the latter, NaO2 formed first, followed by its disproportionation to Na2O2 and O2. Concurrent with the two distinct electrochemical reactions, the CuO NWs experienced multiple consecutive large volume expansions. It is evident that the freshly formed ultrafine-grained Cu in the conversion reaction catalyzed the latter one-electron-transfer ORR, leading to the formation of NaO2. Remarkably, no carbonate formation was detected in the oxygen cathode after cycling due to the absence of carbon source in the whole battery setup. These results provide fundamental understanding into the oxygen chemistry in the carbonless air cathode in all solid state Na-O2 batteries.

Electronic Structure Control of Tungsten Oxide Activated by Ni for Ultrahigh-Performance Supercapacitors.

Tuning the electron structure is of vital importance for designing high active electrode materials. Here, for boosting the capacitive performance of tungsten oxide, an atomic scale engineering approach to optimize the electronic structure of tungsten oxide by Ni doping is reported. Density functional theory calculations disclose that through Ni doping, the density of state at Fermi level for tungsten oxide can be enhanced, thus promoting its electron transfer. When used as electrode of supercapacitors, the obtained Ni-doped tungsten oxide with 4.21 at% Ni exhibits an ultrahigh mass-specific capacitance of 557 F g-1 at the current density of 1 A g-1 and preferable durability in a long-term cycle test. To the best of knowledge, this is the highest supercapacitor performance reported so far in tungsten oxide and its composites. The present strategy demonstrates the validity of the electronic structure control in tungsten oxide via introducing Ni atoms for pseudocapacitors, which can be extended to other related fields as well.