Silencing ScGUX2 reduces xylan glucuronidation and improves biomass saccharification in sugarcane.

There is an increasing need for renewable energy sources to replace part of our fossil fuel-based economy and reduce greenhouse gas emission. Sugarcane bagasse is a prominent feedstock to produce cellulosic bioethanol, but strategies are still needed to improve the cost-effective exploitation of this potential energy source. In model plants, it has been shown that GUX genes are involved in cell wall hemicellulose decoration, adding glucuronic acid substitutions on the xylan backbone. Mutation of GUX genes increases enzyme access to cell wall polysaccharides, reducing biomass recalcitrance in Arabidopsis thaliana. Here, we characterized the sugarcane GUX genes and silenced GUX2 in commercial hybrid sugarcane. The transgenic lines had no penalty in development under greenhouse conditions. The sugarcane GUX1 and GUX2 enzymes generated different patterns of xylan glucuronidation, suggesting they may differently influence the molecular interaction of xylan with cellulose and lignin. Studies using biomass without chemical or steam pretreatment showed that the cell wall polysaccharides, particularly xylan, were less recalcitrant in sugarcane with GUX2 silenced than in WT plants. Our findings suggest that manipulation of GUX in sugarcane can reduce the costs of second-generation ethanol production and enhance the contribution of biofuels to lowering the emission of greenhouse gases.

Efficacy of six exercise-based interventions for individuals undergoing hemodialysis: a network meta-analysis of randomized clinical trials.

BACKGROUND: Evidence comparing different exercise modalities in individuals undergoing hemodialysis remains incipient. Our aim was to conduct a systematic review and network meta-analysis of randomized clinical trials to compare and synthesize the efficacy of five different intradialytic exercise modalities and home-based training in this population. DESIGN, SETTING, PARTICIPANTS, AND MEASUREMENTS: Studies were searched in PubMed/MEDLINE, Cochrane Library, Embase, Cinahl, and Scopus from their inception to 19 September 2022. We used traditional random-effects models and Bayesian network meta-analysis models. The risk of bias was assessed using the RoB v.2.0 tool, and the assessment of confidence in the results through the Confidence in Network Meta-Analysis (CINeMA) tool. RESULTS: Seventy-eight studies involving 3326 participants were included. Our network meta-analysis showed that combined training was the intervention with the best performance to increase VO2 peak [mean difference (MD) = 3.94 ml/kg/min; 95% credible interval (CrI), 2.38 to 5.76] and to reduce diastolic blood pressure (MD = -5.19 mmHg; 95%CrI, -9.35 to -0.96) compared to the usual care group. Inspiratory muscle training was the intervention that most improved the 6-minute walk test distance (MD = 70.97 m; 95%CrI, 18.09 to 129.87). C-reactive protein decreased in resistance training (MD = -2.6 mg/l; 95%CrI, -4.97 to -0.33) and aerobic training (MD = -1.4 mg/l; 95%CrI, -3.15 to -0.06). Kt/V improved in aerobic training (MD = 0.11; 95%CrI, 0.02 to 0.18), and SF-36 physical functioning outcomes improved in resistance training (MD = 10.66 points; 95%Crl, 1.91 to 20.22). No intradialytic exercise modality was superior to others or comparable with home-based training in improving the evaluated outcomes. Subgroup analysis revealed that exercise interventions >12 weeks improved functional capacity more than interventions ≤12 weeks, and that combined training reduces diastolic blood pressure only after 12 weeks of follow-up. Furthermore, our results suggest that moderate or moderate-to-vigorous intensity training leads to more pronounced improvements in functional capacity, whereas mild or mild-to-moderate intensity training does not have the same effect. In this review, most of the included studies were assessed as having some concern, which resulted in a low to very low level of confidence in the overall findings. CONCLUSIONS: Both intradialytic training and home-based training can promote benefits for individuals undergoing hemodialysis, with no evidence of the superiority of either training modality over the other.

Short implants: Influence of different diameters, torques, and transmucosal heights of straight prosthetic abutments on screw preload loss after cycling.

This study evaluated the influence of different implant diameters, insertion torques, and transmucosal heights on the loosening of abutments installed on short implants, after mechanical cycling. The Morse taper connection implants (n = 96) tested were 5 mm high, divided according to the platform diameter: 4 or 6 mm. A universal abutment was coupled to each implant (with different transmucosal heights: 1 or 5 mm). The sets were subdivided into 20- and 32-Ncm torque. After the cycle fatigue test, the detorque values were measured with a digital torque indicator. After mechanical cycling, the mean detorque values obtained for the abutment with 20-Ncm insertion torque were lower than for implants with 32-Ncm insertion torque, regardless of the platform diameter or transmucosal height. In the 20-Ncm torque group, there was no statistically significant difference in the detorque values between platform diameters or transmucosal heights. Otherwise, for 32-Ncm sets, a smaller platform diameter (4 mm), and a longer transmucosal height (5 mm) showed the lowest detorque values. In conclusion, implants placed with 32-Ncm insertion torque and abutments with 1 mm transmucosal height and a 6 mm implant diameter demonstrated the highest detorque values.

Horizontal Bone Augmentation With Autogenous and Collagenated Xenogeneic Bone Blocks: A Split-Mouth Prospective Clinical, Tomographic, and Histological Pilot Study.

The aim of this study was to compare the clinical, tomographic, and histological performance of collagenated xenogeneic bone blocks (CXBB) in horizontal bone augmentations for implant placement. Five patients with an absence of the 4 upper incisors and an HAC 3 horizontal bone defect, with a remaining of 3 to 5 mm, underwent a bone-grafting procedure with CXBB (test group [TG], n = 5) and autogenous graft (control group [CG], n = 5), with one type of graft used on the right side and other type on the left side. Changes in bone thickness and density (tomographic evaluation), levels of complications (clinically), and distribution pattern between mineralized and nonmineralized tissue (histomorphometrically) were analyzed. Tomographic analysis showed a horizontal bone increase of 4.25 ± 0.78 mm in the TG and 3.08 ± 0.8 mm in the CG between baseline and 8 months postoperatively (P < .05). The horizontal loss between the day of installation of the blocks and 8 months postoperatively was 1.02 ± 0.39 mm for the TG and 1.10 ± 0.71 mm for the CG (P > .05). With regard to bone density, the TG blocks right after installation had 440.2 ± 89.15 HU, and after 8 months, the region reached 730.7 ± 130.98 HU, representing an increase of 29.05%. For the CG blocks, bone density increased from 1052.2 ± 398.35 HU to 1222.5 ± 453.28 HU, representing an increase of 17.03%. The increase in bone density was significantly higher in the TG (P < .05). Clinically, no cases of exposure of the bone blocks and no failure of incorporation were observed. Histomorphometrically, the percentage of mineralized tissue was lower in the TG than in the CG (48.10% ± 2.88% and 53.53% ± 1.05%, respectively), and the opposite was verified for the levels of nonmineralized tissue (52.79% ± 2.88% and 46.47% ± 1.05%, respectively; P < .05). The use of CXBB achieved higher levels of horizontal gain, with lower bone density and lower levels of mineralized tissue when compared with the use of autogenous blocks.

All digital sliding mode observer of a feedback-free interferometer for high dynamic range detection.

A passive interferometry phase detection method is presented, which emulates the closed-loop high gain approach technique. This method comprises an all-digital closed-loop observer based on the variable structure and sliding modes nonlinear control theory, able to demodulate the phase of an open-loop feedback-free interferometer hardware. A proof-of-concept experiment is conducted by measuring complex displacements (module and angle) generated by a piezoelectric actuator. The results show that this method simplifies the optical hardware while providing features such as direct detection of the optical phase, increase of the dynamic range, high robustness, and dismissing of the feedback phase modulator and reset circuits.

Characterization of a thin-film metal-coated fiber optical phase modulator based on thermal effect with a nonlinear control interferometer.

In this work, an optical fiber was coated by a thin-film metal layer to work as a fiber optical phase modulator based on thermal effect. This device was assembled in one of the arms of an all-fiber Michelson interferometer stabilized by a nonlinear control system based on variable structure and sliding modes. The frequency response reached 200 Hz, which can be considered high for a device based on the thermal effect. Compared with a fiber optical phase modulator based on the piezoelectric effect, the thermal modulator presented a higher scale factor per meter of optical fiber, showing the potential to work as a simple, low-cost, small-sized, short length, lightweight, and low-voltage fiber optical phase modulator.

What could be the fate of secondary contact zones between closely related plant species?

Interspecific hybridization has been fundamental in plant evolution. Nevertheless, the fate of hybrid zones throughout the generations remains poorly addressed. We analyzed a pair of recently diverged, interfertile, and sympatric Petunia species to ask what fate the interspecific hybrid population has met over time. We analyzed the genetic diversity in two generations from two contact sites and evaluated the effect of introgression. To do this, we collected all adult plants from the contact zones, including canonicals and intermediary colored individuals, and compared them with purebred representatives of both species based on seven highly informative microsatellite loci. We compared the genetic diversity observed in the contact zones with what is seen in isolated populations of each species, considering two generations of these annual species. Our results have confirmed the genetic differentiation between the species and the hybrid origin of the majority of the intermediary colored individuals. We also observed a differentiation related to genetic variability and inbreeding levels among the populations. Over time, there were no significant differences per site related to genetic diversity or phenotype composition. We found two stable populations kept by high inbreeding and backcross rates that influence the genetic diversity of their parental species through introgression.

Wide dynamic range quadrature interferometer with high-gain approach and sliding mode control.

The present work concerns with the modeling, development and application of a novel control strategy based on sliding mode control, for two beam quadrature interferometers, with the high-gain approach. In this case, by reading the control signal the demodulation process does not require phase unwrapping algorithms, i.e., the output signal presents a straight-line relationship with the interferometer total phase shift. This system was implemented in a digital platform to control a bulk Michelson interferometer whose performance was experimentally determined, showing its capability on achieving real-time measurement and presenting wider dynamic range and bandwidth (52.5 rad in low frequencies and 5.8 rad up to 500 Hz) when compared with the literature. Moreover, this performance can be improved even further by simply increasing the feedback gain.

Nonlinear control system for optical interferometry based on variable structure control and sliding modes.

This work presents a novel nonlinear control system designed for interferometry based on variable structure control and sliding modes. This approach can fully compensate the nonlinear behavior of the interferometer and lead to high accuracy control for large disturbances, featuring low cost, ease of implementation and high robustness, without a reset circuit (when compared with a linear control system). A deep stability analysis was accomplished and the global asymptotic stability of the system was proved. The results showed that the nonlinear control is able to keep the interferometer in the quadrature point and suppress signal fading for arbitrary signals, sinusoidal signals, or zero input signal, even under strong external disturbances. The system showed itself suitable to characterize a multi-axis piezoelectric flextentional actuator, which displacements that are much smaller than half wavelength. The high robustness allows the system to be embedded and to operate in harsh environments as factories, bringing the interferometry outside the laboratory.

Use of Bone Allograft With or Without Bone Marrow Aspirate Concentrate in Appositional Reconstructions: A Tomographic and Histomorphometric Study.

OBJECTIVES: To evaluate bone allograft associated to bone marrow aspirate concentrate (BMAC), in maxillary reconstructions. MATERIALS AND METHODS: Ten patients with alveolar bone deficiency in the anterior maxilla were randomly divided into control group (CG) and test group (TG). A bone block allograft was placed in both groups, but the graft was impregnated with BMAC only in TG. Computed tomography was performed 7 days (T1) and 6 months (T2) after the grafting procedure, and volume and bone density measurements were carried out. Histomorphometric analysis was performed at T2. RESULTS: Bone volume loss from T1 to T2 was significant only in TG. The bone density in the buccal region of the graft was significantly higher in TG than in CG. There was no significant difference between the groups, in respect to mineralized tissue (MT) and nonmineralized tissue (NMT), in that MT values were 37.77% ± 15.19% and 43.85% ± 10.94%, and NMT values were 62.15% ± 14.90% and 56.30% ± 10.72%, respectively, for CG and TG. The intragroup difference for the MT/NMT ratio was statistically significant in CG but not significant in TG. CONCLUSIONS: The use of BMAC resulted in an improved pattern of bone formation, with higher bone density in the peripheral regions of the graft.

Homologous transplantation with fresh frozen bone for dental implant placement can induce HLA sensitization: a preliminary study.

It has been related in orthopedic surgeries the HLA sensitization. Thus, we evaluate if the use of fresh-frozen homologous bone (FFHB) for dental implant placement induce anti-HLA sensitization. Six patients were treated with FFHB corticocancellous block grafts. After 6 months, bone biopsies were harvested during implant placement to allow histomorphometric analysis. Vital mineralized tissue (VMT), non-vital mineralized tissue (NVMT) and non-mineralized tissue (NMT) were quantified histomorphometrically. Peripheral blood was collected from the patients before FFHB placement and 6 months after the surgery for anti-HLA analysis. The histomorphometric analysis showed the presence of VMT, NVMT and NMT in 45.56 ± 15.72 %, 14.16 ± 13.39 % and 40.29 ± 12.60 %, respectively. The baseline and 6 months postoperative CTs revealed bone thickness in the order of 5.66 ± 0.67 mm and 8.71 ± 1.52 mm (3.05 ± 1.39 mm). The anti-HLA analysis revealed that two of the six patients (33.3 %) became sensitized, however this was not associated with any FFHB incorporation loss (p > 0.05). A total of 24 implants were placed all of which were osseointegrated after 6 months. Although FFHB-related HLA sensitization does not appear to affect bone incorporation when treating insufficient bone thickness for implant placement, further follow-up is required to determine whether there is an association between HLA sensitization and long-term graft survival.

Injectable silicon oils - complications.

There have been reports of the use of silicone oils in injectable form for cosmetic purposes since the 1940s. With the popularization of the use of this technique in the mid-60s, there have been a wide range of adverse effects reported. We report a 32-year-old woman, who had intramuscular injections of an unknown substance, which led to serious complications.

Angioqueratomas de fordyce múltiplos de vulva associados à cirrose hepática.

Fordyce angiokeratoma is a benign skin neoplasm, characterized by erythematous-violet keratotic papules with mamillated surface, which follows a chronic and minimally symptomatic course. However, symptoms can be related such as itching, burning, bleeding, dyspareunia; aesthetic and social concerns may prompt request for treatment. The condition mainly affects men and usually occurs in the scrotum, but rarely may occur in women. A 30-year-old woman with liver cirrhosis and portal hypertension is described. Over a period of two years she developed multiple angiokeratomas of the vulva, complicated by frequent bleeding. Histopathologic analysis of the lesion confirmed the diagnosis of angiokeratoma and all lesions were surgically removed. The results of the treatment were very satisfactory, with no relapses or complications.Angioqueratoma de Fordyce é uma dermatose incomum que compõe o grupo das neoplasias cutâneas benignas, caracterizando-se pelo aparecimento de lesões papuloceratósicas, eritemato-violáceas de superfície mamilonada, que apresentam curso crônico e oligossintomático. No entanto, outros sintomas podem estar associados, como prurido, ardência, sangramento e dispareunia, além de problemas estéticos e de ordem social. Afeta principalmente homens, acometendo a região escrotal, sendo raro seu surgimento em mulheres. Relata-se caso de uma paciente com 30 anos de idade, portadora de cirrose hepática e hipertensão portal evoluindo há 2 anos com múltiplos angioqueratomas na vulva de sangramento frequente. A análise histopatológica confirmou o diagnóstico de angioqueratoma e a paciente foi submetida à exérese cirúrgica das lesões. Os resultados terapêuticos foram satisfatórios, sem recidivas ou complicações.

Predictable Outcomes with Porcelain Laminate Veneers: A Clinical Report.

This clinical report describes how to achieve predictable outcomes for anterior teeth esthetic restorations with porcelain laminate veneers by associating the digital planning and design of the restoration with interim restorations. The previous digital smile design of the restoration eliminates the communication barrier with the patient and assists the clinician throughout patient treatment. Interim restorations (diagnostic mock-ups) further enhance communication with the patient and prevent unnecessary tooth reduction for conservative tooth preparation. Adequate communication between patient and clinician contributes to successful definitive restorations and patient satisfaction with the final esthetic outcome.

Stress distribution on implant- supported zirconia crown of maxillary first molar: effect of oblique load on natural and antagonist tooth.

This study evaluated the stress distribution on an implant-supported zirconia crown of a mandibular first molar subjected to oblique loading by occlusal contact with the natural maxillary first molar by using the 3D finite element method. Two virtual models were made to simulate the following situations: (1) occlusion between maxillary and mandibular natural first molars; (2) occlusion between zirconia implant-supported ceramic crown on a mandibular first molar and maxillary natural first molar. The models were designed virtually in a modeling program or CAD (Computer Aided Design) (Rhinoceros). An oblique load of 100 N was uniformly applied to the zirconia framework of the crown. The results were obtained by the Von Mises criterion of stress distribution. Replacement of the mandibular tooth by an implant caused a slight increase in stress on portions of the maxillary tooth roots. The crown of the maxillary model in occlusion with natural antagonist tooth showed 12% less stress when compared with the maxillary (model in occlusion with the) implant-supported crown. The mandibular crown of the implant show 35% more stress when compared with the mandibular antagonist crown on the natural tooth. The presence of the implant to replace the mandibular tooth increased the stresses on the maxillary tooth, especially in the region of the mesial and distal buccal roots.

Effects of intradialytic inspiratory muscle training at different intensities on diaphragm thickness and functional capacity: clinical trial protocol in patients undergoing haemodialysis.

INTRODUCTION: Patients with end-stage renal disease (ESRD) undergoing haemodialysis (HD) commonly present with a sedentary behaviour and reduced functional capacity, factors that can compromise their prognosis. Intradialytic inspiratory muscle training (IMT) can increase respiratory muscle strength and, consequently, improve functional capacity, besides being easy to apply, cheap and performed in a supervised setting. However, few studies show the effects of this type of training applied at different intensities in this population. This study aims to compare the effects of IMT at different intensities in adults with ESRD undergoing HD. METHODS AND ANALYSIS: A randomised, double-blind, sham-controlled trial will be conducted on 36 subjects randomly allocated into three groups: IMT at intensities of 30% or 50% of maximal inspiratory pressure (intervention groups), or 10% of maximal inspiratory pressure (sham-IMT). All the interventions will be supervised and performed three times per week, for 12 weeks, totalling 36 sessions. The primary outcomes are the 6-minute walk test, diaphragm thickness and the response of VO2peak post-intervention. Respiratory muscle strength, 24-hour ambulatory blood pressure measurement and the Kidney Disease Quality of Life 36-item short form survey will be evaluated as secondary outcomes. ETHICS AND DISSEMINATION: This study has been approved by the Research Ethics Committee of the Hospital de Clínicas de Porto Alegre (ID: 2020-0458). The results of this study will be disseminated by conference presentations and peer-reviewed journal. TRIAL REGISTRATION NUMBER: NCT04660383.

Collagen-chitosan-hydroxyapatite composite scaffolds for bone repair in ovariectomized rats.

Lesions with bone loss may require autologous grafts, which are considered the gold standard; however, natural or synthetic biomaterials are alternatives that can be used in clinical situations that require support for bone neoformation. Collagen and hydroxyapatite have been used for bone repair based on the concept of biomimetics, which can be combined with chitosan, forming a scaffold for cell adhesion and growth. However, osteoporosis caused by gonadal hormone deficiency can thus compromise the expected results of the osseointegration of scaffolds. The aim of this study was to investigate the osteoregenerative capacity of collagen (Co)/chitosan (Ch)/hydroxyapatite (Ha) scaffolds in rats with hormone deficiency caused by experimental bilateral ovariectomy. Forty-two rats were divided into non-ovariectomized (NO) and ovariectomized (O) groups, divided into three subgroups: control (empty defect) and two subgroups receiving collagen/chitosan/hydroxyapatite scaffolds prepared using different methods of hydroxyapatite incorporation, in situ (CoChHa1) and ex situ (CoChHa2). The defect areas were submitted to macroscopic, radiological, and histomorphometric analysis. No inflammatory processes were found in the tibial defect area that would indicate immune rejection of the scaffolds, thus confirming the biocompatibility of the biomaterials. Bone formation starting from the margins of the bone defect were observed in all rats, with a greater volume in the NO groups, particularly the group receiving CoChHa2. Less bone formation was found in the O subgroups when compared to the NO. In conclusion, collagen/chitosan/hydroxyapatite scaffolds stimulate bone growth in vivo but abnormal conditions of bone fragility caused by gonadal hormone deficiency may have delayed the bone repair process.

Conditioned Media from Human Pulp Stem Cell Cultures Improve Bone Regeneration in Rat Calvarial Critical-Size Defects.

The aim of this study was to test whether lyophilized conditioned media from human dental pulp mesenchymal stem cell cultures promote the healing of critical-size defects created in the calvaria of rats. Prior to the surgical procedure, the medium in which dental pulp stem cells were cultured was frozen and lyophilized. After general anesthesia, an 8 mm diameter bone defect was created in the calvaria of twenty-four rats. The defects were filled with the following materials: xenograft alone (G1) or xenograft associated with lyophilized conditioned medium (G2). After 14 or 42 days, the animals were euthanized, and the specimens processed for histologic and immunohistochemical analysis. Bone formation at the center of the defect was observed only in the G2 at 42 days. At both timepoints, increased staining for VEGF, a marker for angiogenesis, was observed in G2. Consistent with this, at 14 days, G2 also had a higher number of blood vessels detected by immunostaining with an anti-CD34 antibody. In conclusion, conditioned media from human dental pulp mesenchymal stem cell cultures had a positive effect on the regenerative process in rat critical-size bone defects. Both the formation of bone and enhancement of vascularization were stimulated by the conditioned media.

In Vivo Evaluation of Collagen and Chitosan Scaffold, Associated or Not with Stem Cells, in Bone Repair.

Natural polymers are increasingly being used in tissue engineering due to their ability to mimic the extracellular matrix and to act as a scaffold for cell growth, as well as their possible combination with other osteogenic factors, such as mesenchymal stem cells (MSCs) derived from dental pulp, in an attempt to enhance bone regeneration during the healing of a bone defect. Therefore, the aim of this study was to analyze the repair of mandibular defects filled with a new collagen/chitosan scaffold, seeded or not with MSCs derived from dental pulp. Twenty-eight rats were submitted to surgery for creation of a defect in the right mandibular ramus and divided into the following groups: G1 (control group; mandibular defect with clot); G2 (defect filled with dental pulp mesenchymal stem cells-DPSCs); G3 (defect filled with collagen/chitosan scaffold); and G4 (collagen/chitosan scaffold seeded with DPSCs). The analysis of the scaffold microstructure showed a homogenous material with an adequate percentage of porosity. Macroscopic and radiological examination of the defect area after 6 weeks post-surgery revealed the absence of complete repair, as well as absence of signs of infection, which could indicate rejection of the implants. Histomorphometric analysis of the mandibular defect area showed that bone formation occurred in a centripetal fashion, starting from the borders and progressing towards the center of the defect in all groups. Lower bone formation was observed in G1 when compared to the other groups and G2 exhibited greater osteoregenerative capacity, followed by G4 and G3. In conclusion, the scaffold used showed osteoconductivity, no foreign body reaction, malleability and ease of manipulation, but did not obtain promising results for association with DPSCs.

Effect of gender, experience, and value on color perception.

STATEMENT OF THE PROBLEM: Precise shade matching can be one of the most difficult tasks for the dentist and some variables may influence the process of shade comparison. PURPOSE OF THE STUDY: This study tested the differences in shade perception between genders, the influence of the observer's clinical experience, and the value of ceramics in correct shade selection. MATERIAL AND METHODS: A total of 45 women and 54 men compared 16 pairs of ceramic disks according to shades. The χ(2) and Fisher exact tests were used to analyze the results, adopting 5% as the level of statistical significance. An analysis of risk was also performed to evaluate the variables. RESULTS: The results indicated that there were statistical differences among gender, clinical experience, and shades in discriminating ceramics. CONCLUSIONS: Men and observers with more clinical experience were more successful in discriminating shades, although darker shades were selected more correctly than the lighter ones.