High fried food consumption impacts anxiety and depression due to lipid metabolism disturbance and neuroinflammation.

Western dietary patterns have been unfavorably linked with mental health. However, the long-term effects of habitual fried food consumption on anxiety and depression and underlying mechanisms remain unclear. Our population-based study with 140,728 people revealed that frequent fried food consumption, especially fried potato consumption, is strongly associated with 12% and 7% higher risk of anxiety and depression, respectively. The associations were more pronounced among male and younger consumers. Consistently, long-term exposure to acrylamide, a representative food processing contaminant in fried products, exacerbates scototaxis and thigmotaxis, and further impairs exploration ability and sociality of adult zebrafish, showing anxiety- and depressive-like behaviors. Moreover, treatment with acrylamide significantly down-regulates the gene expression of tjp2a related to the permeability of blood-brain barrier. Multiomics analysis showed that chronic exposure to acrylamide induces cerebral lipid metabolism disturbance and neuroinflammation. PPAR signaling pathway mediates acrylamide-induced lipid metabolism disorder in the brain of zebrafish. Especially, chronic exposure to acrylamide dysregulates sphingolipid and phospholipid metabolism, which plays important roles in the development of anxiety and depression symptoms. In addition, acrylamide promotes lipid peroxidation and oxidation stress, which participate in cerebral neuroinflammation. Acrylamide dramatically increases the markers of lipid peroxidation, including (±)5-HETE, 11(S)-HETE, 5-oxoETE, and up-regulates the expression of proinflammatory lipid mediators such as (±)12-HETE and 14(S)-HDHA, indicating elevated cerebral inflammatory status after chronic exposure to acrylamide. Together, these results both epidemiologically and mechanistically provide strong evidence to unravel the mechanism of acrylamide-triggered anxiety and depression, and highlight the significance of reducing fried food consumption for mental health.

Spatial distribution characteristics and health risk assessment of heavy metals in surface sediment of the Hai River and its tributaries in Tianjin, China.

To assess the spatial distribution characteristics and health risk of heavy metals (Cu, Zn, Ni, Cd, Pb, and Cr) in surface sediment of the Hai River and its tributaries in Tianjin, China, 32 surface sediment samples were collected. All the heavy metals mainly occurred in residue, except Cd. Cd primarily existed in the exchangeable fraction and posed a high risk to the aquatic environment. The mean values of pollution index followed a decreasing trend of Cu > Cd > Ni > Pb > Cr > Zn. The results of health risk assessment showed that the heavy metals were not a threat to local residents and Cr and Pb were the main contributors to the health risk. The carcinogenic risk posed by Cr was two orders of magnitude higher than that posed by Cd. A self-organizing map divided the 32 sites into three clusters and more attention should be paid to cluster 3. The results will be conducive to understanding the heavy metal pollution patterns and implementing effective and accurate management programs.

Investigation for Synergies of Ionic Strength and Flow Velocity on Colloidal-Sized Microplastic Transport and Deposition in Porous Media Using the Colloidal-AFM Probe.

Studies that explore the transport and retention behavior of colloidal-sized microplastic (MP) with focusing on the governing mechanisms for their attachment and detachment process using colloidal-atomic force microscopy (C-AFM) were still limited. In the present study, multiscale investigations ranging from pore-scale column test to microscale visualization and eventually to nanoscale interfacial and adhesive force measurement were conducted. Pore- and microscale tests were conducted at various flow velocity and over a broad range of IS values and found that IS and flow velocity could synergically impact the deposition of MPs during filtration, in particular under unfavorable condition at small flow velocity. The net difference between the highest and lowest deposition conditions became smaller while flow velocity was decreasing in porous media. However, the net difference between the high and low IS conditions in parallel plate chamber were not sensitive to the change of flow velocity. The measurement from C-AFM suggested that not only the interfacial force but also the adhesive forces changed while MP was approaching/retracting to the collector surface. Information related to the magnitude, location, and occurrence of interfacial/adhesive forces were analyzed. Comparisons of the interaction energy determined from the measured force and ones derived from surface energy components using DLVO theory were conducted to explain the synergies of IS and flow velocity on pathogenic size MPs transport and deposition during filtration.

The application of an efficient modified decolorizer in coagulation treatment of high color reclaimed water.

High color concentrations in inflows at reclaimed water treatment plants are typically considered as emergency situations, which must be solved using an appropriate decolorizing process. Using the decoloration mechanism of a modified dicyandiamide-formaldehyde polymer (DFP), a urea-formaldehyde polymer and a melamine-formaldehyde polymer (MFP) were prepared with ammonium chloride and ammonium sulfate as the modifiers. An orthogonal experiment indicated that a modified urea-formaldehyde polymer had no effect on decolorization; however, the MFP modified by ammonium chloride in number 16 (MMFP-C16), the DFP modified by ammonium chloride in number 9 (MDFP-C9) and modified by ammonium sulfate in number 6 (MDFP-S6) were successful. The removal rates were above 50% in acidic and reactive dye reclaimed water. Fourier transform infrared spectroscopy was used to microscopically analyze the differences in decolorization effect among the polymers. The effect of pH on decolorization was analyzed. Compared to the MDFP-C9 and MDFP-S6, the MMFP-C16 was not sensitive to changes in conditions. The pilot plant test proved that the three optimal decolorizers also had a good decolorizing effect, and MMFP-C16 was better both at decolorizing and floc sedimentation. Thus, the latter can be considered as an efficient modified decolorizer for rapid treatment of high color reclaimed water.

Hydrological performance of dual-substrate-layer green roofs using porous inert substrates with high sorption capacities.

Given that the common medium in existing green roofs is a single layer composed of organic and inorganic substrates, seven pilot-scale dual-substrate-layer extensive green roofs (G1-G7), which include nutrition and adsorption substrate layers, were constructed in this study. The effectiveness of porous inert substrates (activated charcoal, zeolite, pumice, lava, vermiculite and expanded perlite) used as the adsorption substrate for stormwater retention was investigated. A single-substrate-layer green roof (G8) was built for comparison with G1-G7. Despite the larger total rainfall depth (mm) of six types of simulated rains (43.2, 54.6, 76.2, 87.0, 85.2 and 86.4, respectively), the total percent retention of G1-G7 varied between 14% and 82% with an average of 43%, exhibiting better runoff-retaining capacity than G8 based on the maximum potential rainfall storage depth per unit height of adsorption substrate. Regression analysis showed that there was a logarithmic relationship between cumulative rainfall depth with non-zero runoff and stormwater retention for G1-G4 and a linear relationship for G5-G8. To enhance the water retention capacity and extend the service life of dual-substrate-layer extensive green roofs, the mixture of activated charcoal and/or pumice with expanded perlite and/or vermiculite is more suitable as the adsorption substrate than the mixture containing lava and/or zeolite.

A landscape lake flow pattern design approach based on automated CFD simulation and parallel multiple objective optimization.

A design approach for determining the optimal flow pattern in a landscape lake is proposed based on FLUENT simulation, multiple objective optimization, and parallel computing. This paper formulates the design into a multi-objective optimization problem, with lake circulation effects and operation cost as two objectives, and solves the optimization problem with non-dominated sorting genetic algorithm II. The lake flow pattern is modelled in FLUENT. The parallelization aims at multiple FLUENT instance runs, which is different from the FLUENT internal parallel solver. This approach: (1) proposes lake flow pattern metrics, i.e. weighted average water flow velocity, water volume percentage of low flow velocity, and variance of flow velocity, (2) defines user defined functions for boundary setting, objective and constraints calculation, and (3) parallels the execution of multiple FLUENT instances runs to significantly reduce the optimization wall-clock time. The proposed approach is demonstrated through a case study for Meijiang Lake in Tianjin, China.

Adsorption of Cr(VI) and Cr(III) on layered pipe scales and the effects of disinfectants in drinking water distribution systems.

Pipe scales in drinking water distribution systems (DWDS) potentially adsorb chromium (Cr). Meanwhile, the fate of Cr in pipe scales and water could be influenced by the disinfectants used in DWDS since they might influence the valence state of Cr. Therefore, the adsorption of Cr (Cr(VI) and Cr(III)) on pipe scales, the transformation between different valence states, and the effects of disinfectants present in DWDS are important research topics for improving tap water quality but have not yet been sufficiently investigated. This study investigated the properties of layered pipe scales and conducted adsorption kinetic experiments in single and binary Cr(VI) and Cr(III) systems, as well as experiments related to the oxidation and adsorption of Cr(III) under the influence of decaying disinfectants. According to the results, pipe scales exhibited distinct layered structures with varying mechanisms for the adsorption of Cr(VI) and Cr(III). Cr(VI) was adsorbed through surface complexation on the surface and porous core layers, while redox reactions predominantly occurred on the shell-like layer. Furthermore, Cr(III) was adsorbed via surface precipitation on the three-layer pipe scales. Importantly, disinfectants promoted the transformation of Cr(III) to the less readily released Cr(VI) in pipe scales, reducing the Cr exposure risk from the pipe scale phase. Pipe scales also decreased the Cr(VI) concentration in water (almost 0 mg/L), enhancing the safety of DWDS. This study provides theoretical guidance on the safe operation of DWDS.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning.

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Cu fate driven by colloidal polystyrene microplastics with pipe scale destabilization in drinking water distribution systems.

Microplastics (MPs) and Cu have been detected in drinking water distribution systems (DWDSs). Investigating MP effects on Cu adsorption by pipe scales and concomitant variations of pipe scales was critical for improving the water quality, which remained unclear to date. Therefore, polystyrene microplastics (PSMPs) were adopted for the model MPs to determine their effects on Cu fate and pipe scale stabilization, containing batch adsorption, metal speciation extraction, and Cu release experiments. Findings demonstrated that complexation and electrostatic interactions were involved in Cu adsorption on pipe scales. PSMPs contributed to Cu adsorption via increasing negative charges of pipe scales and providing additional adsorption sites for Cu, which included the carrying and component effects of free and adsorbed PSMPs, respectively. The decreased iron and manganese oxides fraction (45.57 % to 29.91 %) and increased organic fraction (48.51 % to 63.58 %) of Cu in pipe scales when PSMPs were coexisting illustrated that PSMPs had a greater affinity for Cu than pipe scales and thus influenced its mobility. Additionally, the release of Cu could be facilitated by the coexisted PSMPs, with the destabilization of pipe scales. This study was the first to exhibit that Cu fate and pipe scale stabilization were impacted by MPs, providing new insight into MP hazards in DWDSs.

Improvement of heavy metal separation performance by positively charged small-sized graphene oxide membrane.

Multilayered graphene oxide (GO) membranes are promising to be widely applied to purify water effectively. However, the performance of most membranes prepared at present is not ideal, which may be related to the pore diameter of the substrate (determining the real loading amount of GO) and the size of the GO nanosheets (determining the number of channels on the unit area), which has not been fully studied. In this study, a rotating dip-coating reactor were firstly developed to ensure the uniform deposition of reactants on the surface of the substrate. Then, the preparation method for the membrane was improved. Microfiltration membranes were used as the supporting substrate, polydopamine was deposited as the adhesive layer, ethylenediamine was used to restrict the layer spacing to strengthen the size exclusion effect, and positively charged polyethyleneimine (PEI) was used to strengthen the Donnan effect. Finally, the effects of the pore size of the substrate and the size of the GO nanosheets on the membrane performance were investigated. Compared with the substrates with a pore size of 0.22 µm in most literatures, substrates of 0.1 µm can retain more small GO (SGO) nanosheets, thereby improving the performance. The performance of the SGO membrane was much better than that of the large-sized GO membrane. With a water permeability of no less than 7.9 L/(m2·h·bar), rejection rates for Pb2+ and Cd2+ of the SGO membrane could reach more than 97%. These findings are constructive to separate heavy metals from water effectively.

Stability of arsenic(â ¢, â ¤) in galvanized steel pipe scales coexisting with colloidal polystyrene microplastics under drinking water conditions.

The stability of metalloid arsenic (As(Ⅲ)) and As(V) in corrosion scales of drinking water distribution systems (DWDS) is closely related to drinking water safety. The effects of colloidal microplastics entering the DWDS on the stability of As(Ⅲ) and As(V) have not been understood. This study investigated the migration and transformation behaviors of As (Ⅲ) and As(V) in the galvanized steel pipe scales employing speciation simulation and sequential extraction methods. The stability of As(Ⅲ) and As(V) in the pipe scales coexisting with colloidal polystyrene microplastics (CPMPs) under drinking water conditions was studied for the first time from the release behaviors and form distributions. Finally, the optimum water quality conditions for As(Ⅲ) and As(V) fixation were summarized. The existing forms of As(Ⅲ) and As(V) under different pH conditions, the competitive action of anions, and the hydrolysis of cations all would significantly affect the stability of As(Ⅲ) and As(V). Sequential extraction method results revealed that the content of As fractions increased in different forms after the pipe scales adsorbed As(Ⅲ) and As(V). The contents of As and iron (Fe) in the form of residual fractions increased in the presence of CPMPs. The effect of three cations on the stability of As(Ⅲ) and As(V) was Fe3+ > Zn2+ > Ca2+. Neutral to weak alkalescence, proper Cl- and cation concentrations were conducive to the fixation of As in DWDS. Notably, the presence of CPMPs could increase the stability of As(Ⅲ) and As(V) in corrosion scales, thus reducing the risk of metalloid As release in DWDS.

Co-transport behavior and Trojan-horse effect of colloidal microplastics with different functional groups and heavy metals in porous media.

The emerging global problems of microplastics pollution and their co-occurrence with other pollutants have presented major new challenges for environmental health and protection. This study used column experiments to investigate the co-transport behavior and Trojan-horse effect of colloidal microplastics (non-functional polystyrene microspheres (MS), carboxyl-modified polystyrene microspheres (CMS) and sulfonate-modified polystyrene microspheres (SMS)) and lead (Pb) in porous media. Results showed that a Trojan-horse effect occurred during the co-transport of colloidal microplastics and Pb. In the process of co-transport, colloidal microplastics and Pb mutually inhibited each other's transport at an ionic strength of 1 mM, which may be due to Pb absorption by microplastics, resulting in the destabilization of agglomerates and a reduction in the electronegativity of microplastics. At an ionic strength of 100 mM, colloidal microplastics and Pb promoted each other's transport, potentially due to their competition for adsorption in porous media. The functional groups present on colloidal microplastics inhibited the transport of Pb at low ionic strengths, while at high ionic strengths Pb transport was promoted. Furthermore, deposition experiments verified that quartz crystal microbalance with dissipation (QCM-D) monitoring could effectively account for and predict the transport and deposition behavior of microplastics in the presence or absence of Pb.

Study on release and occurrence of typical metals in corrosion products of drinking water distribution systems under stagnation conditions.

Metal contaminants in corrosion products of drinking water distribution systems (DWDS) can be released into potable water under specific conditions, thereby polluting drinking water and posing a health risk. Under stagnation conditions, the release characteristics, occurring forms, and environmental risks of ten metals were determined in loose and tubercle scale solids of an unlined cast iron pipe with a long service history, before and after immersion. Most Al, As, Cr, Fe, and V in corrosion scales existed in the residual fraction, with the released concentration and pollution risk being low. Since more than 59% of Ca in pipe scales existed in the exchangeable fraction, Ca release was high. Although the Pb and Cd content of corrosion solids was low, a high proportion of Pb and Cd was present in non-residual fractions with high mobility. Sudden severe Pb or Cd pollution events in DWDS could result in high pollution and environmental risk levels. The total content and released amount of Mn and Zn in corrosion scales were both high. Therefore, while special attention should be paid to Mn and Zn, Pb and Cd also present a high risk in pipe scales, despite their low concentrations. During stagnation immersion, metal release from powdered pipe scales occurred via the processes of mass release, re-adsorption into scales, and slow release until equilibrium was reached. The levels of metal re-adsorption into scales were much higher than the concentrations dissolved into bulk water. However, the amount of metal re-adsorption into tubercle scale blocks was less. Importantly, these findings highlight that during DWDS operation, the sudden release of metal pollutants caused by pipe scale breakage should be avoided.

[Research Progress on Colloid Pump Effect of Micro- and Nanoplastics in Drinking Water].

Currently, micro- and nanoplastics are the most concerning pollutants, which have been confirmed to exist in every stage of drinking water treatment process. Micro- and nanoplastics in drinking water have large specific surface areas, which could adsorb inorganic matter, organic matter, and microorganisms, thereby increasing their risk to human health. The adsorption and agglomeration behavior of micro- and nanoplastics on typical pollutants is called the "colloid pump effect." Focused on the micro- and nanoplastics in drinking water, the occurrence, colloid pump effect, and toxic effect on the human body and the effect of colloid pumps on the removal of micro- and nanoplastics were summarized and described. The results revealed that micro- and nanoplastics existed widely in source water, treated water, pipe network water, and tap water. The colloid pump effect of micro- and nanoplastics promoted their agglomeration with inorganic matter, organic matter, and microorganisms, which not only intensified the toxic effect of micro- and nanoplastics but also affected the removal effect. There were different viewpoints on the effect of coagulation and sedimentation on the removal of micro- and nanoplastics, and the removal effect of sand filters was limited. The advanced treatment was an efficient process to remove micro- and nanoplastics with a particle size smaller than 5 µm. The removal rate of micro- and nanoplastics could be effectively improved by exploring the mechanism of the colloid pump effect and its initiation conditions. Finally, from the perspective of the drinking water treatment process and colloid pump effect, the control of micro- and nanoplastics in drinking water was prospected in order to provide reference for reducing the occurrence and toxicity of micro- and nanoplastics in drinking water, ensuring drinking water quality safety and human health.

Effect of NaClO and ClO2 on the bacterial properties in a reclaimed water distribution system: efficiency and mechanisms.

Extensive application of reclaimed water alleviated water scarcity obviously. Bacterial proliferation in reclaimed water distribution systems (RWDSs) poses a threat to water safety. Disinfection is the most common method to control microbial growth. The present study investigated the efficiency and mechanisms of two widely used disinfectants: sodium hypochlorite (NaClO) and chlorine dioxide (ClO2) on the bacterial community and cell integrity in effluents of RWDSs through high-throughput sequencing (Hiseq) and flow cytometry, respectively. Results showed that a low disinfectant dose (1 mg/L) did not change the bacterial community basically, while an intermediate disinfectant dose (2 mg/L) reduced the biodiversity significantly. However, some tolerant species survived and multiplied in high disinfectant environments (4 mg/L). Additionally, the effect of disinfection on bacterial properties varied between effluents and biofilm, with changes in the abundance, bacterial community, and biodiversity. Results of flow cytometry showed that NaClO disturbed live bacterial cells rapidly, while ClO2 caused greater damage, stripping the bacterial membrane and exposing the cytoplasm. This research will provide valuable information for assessing the disinfection efficiency, biological stability control, and microbial risk management of reclaimed water supply systems.

[Research Progress on Trojan-horse Effect of Microplastics and Heavy Metals in Freshwater Environment].

As an emerging pollutant of global concern, microplastics (plastics with size<5 mm) and heavy metals are widely found in freshwater environments. Microplastics migrate easily, are difficult to degrade, and have large specific surface areas. They can enrich a variety of pollutants such as heavy metals and greatly increase their potential harm to the environment and ecology. Firstly, the special environmental behavior of microplastics carrying heavy metals and migrating together in freshwater environments was defined as the "Trojan-horse effect." Then, the Trojan-horse effect and its mechanism of microplastics and heavy metals in the freshwater environment were summarized and expounded from four aspects:the source and distribution of microplastics in the freshwater environment, the enrichment effect of microplastics on heavy metals, the impact of microplastics and the heavy metal Trojan-horse effect on its migration behavior, and the biological impact of microplastics and the heavy metal Trojan-horse effect. The results showed that, as a wide range of non-point source pollutants, microplastics widely existed in freshwater environments. In freshwater environments, the adsorption degree of single metals was different in different environments. It was mainly affected by microplastics, metals, and environmental factors. There was competitive adsorption in the presence of multiple metal ions. The Trojan-horse effect of microplastics and heavy metals could also affect their co-transport behavior. The Trojan-horse effect of microplastics and heavy metals in the freshwater environment frequently exacerbated their toxicity to aquatic organisms. This study provides references for comprehensively understanding the Trojan-horse effect and its mechanism in microplastics and heavy metals in the freshwater environment, which could effectively reduce the ecological risk and impact on human health of microplastics and heavy metals in the freshwater environment.

Characteristics of vanadium release from layered steel pipe scales to bulk, steady, and occluded water in drinking water distribution systems.

The release of vanadium (V) from drinking water distribution systems (DWDS) can endanger water quality and human health. Therefore, in this study, the physicochemical characteristics of old steel pipe scales were analyzed, and dynamic pipeline devices were constructed. Subsequently, static release experiments were conducted to find an optimum scale-water ratio and investigate the release behaviors of V in lumpy pipe scales. Besides, the release behaviors of V from layered pipe scales to bulk, steady, and occluded water under the combined effect of multiple water quality conditions were studied for the first time. Computational fluid dynamics (CFD) was adopted to explain the release behaviors of V in the dynamic pipeline. Results revealed that the adsorption performance of the layered scales decreased in the order of surface layer > porous core layer > hard shell-like layer. The release behaviors of V in the lumpy pipe scales were mainly divided into rapid desorption and colloidal agglomeration stages. The Double constant and Weber-Morris models can suitably describe release stage I (R2 > 0.919) and release stage II (R2 > 0.948), respectively. Notably, the release of V was aggravated by low pH, high temperature, and high SO42- concentration, and the release amount of V in the pipeline was more significant than the layered pipe scales. Steady water in the gaps of scales contained more V than bulk water, and the malignant occluded water encased in scales contained relatively low V concentrations. In short, the main mechanism of V release was competitive adsorption in the early stage, and pH was the main influencing factor in the later stage. The above results are of great significance for revealing the release behaviors of V and reducing its release in DWDS.

Targeted Lipidomics Reveal the Effect of Perchlorate on Lipid Profiles in Liver of High-Fat Diet Mice.

Perchlorate, commonly available in drinking water and food, acts on the iodine uptake by the thyroid affecting lipid metabolism. High-fat diets leading to various health problems continually raise public concern. In the present study, liver lipid metabolism profiles and metabolic pathways were investigated in C57BL/6J mice chronically exposed to perchlorate using targeted metabolomics. Mice were fed a high-fat diet and treated orally with perchlorate at 0.1 mg/kg bw (body weight), 1 mg/kg bw and 10 mg/kg bw daily for 12 weeks. Perchlorate induced disorders of lipid metabolism in vivo and hepatic lipid accumulation confirmed by serum biochemical parameters and histopathological examination. There were 34 kinds of lipid in liver detected by UHPLC-MS/MS and key metabolites were identified by multivariate statistical analysis evaluated with VIP > 1, p-value < 0.05, fold change > 1.2 or < 0.8. Perchlorate low, medium and high dose groups were identified with 11, 7 and 8 significantly altered lipid metabolites compared to the control group, respectively. The results of the metabolic pathway analysis revealed that the differential metabolites classified into different experimental groups contribute to the glycerophospholipid metabolic pathway. These findings provide insights into the effects of perchlorate on lipid metabolism during long-term exposure to high-fat diets and contribute to the evaluation of perchlorate liver toxic mechanisms and health effects.

Cr release after Cr(III) and Cr(VI) enrichment from different layers of cast iron corrosion scales in drinking water distribution systems: the impact of pH, temperature, sulfate, and chloride.

Chromium accumulated from source water and pipeline lining materials in corrosion scales could potentially be released into bulk water in drinking water distribution systems (DWDS). This study examined the influence of pH (pH 4, pH 5.5, pH 7, pH 8.5, pH 10), temperature (5 °C, 15 °C, 25 °C), sulfate (50 mg/L, 150 mg/L, 250 mg/L), and chloride (50 mg/L, 150 mg/L, 250 mg/L) on chromium accumulation and release between iron corrosion scale phase and the surrounding water phase. For the first time, the accumulation and release behaviors of chromium were assessed and compared in two distinct layers of iron corrosion scales based on the speciation distributions of heavy metals. Results showed that in the outer and inner layers of corrosion scales, chromium exhibited an almost similar trend but significant differences in quantity, with the outer layer accumulating less and releasing more. In particular, the average difference of chromium released after Cr(VI) enrichment from the outer and inner layers was 50.53 µg/L under the same conditions. Further studies conclusively showed that in Cr(VI) accumulation process, a portion of Cr(VI) would be reduced to Cr(III) by Fe(II) in iron corrosion scales. The mechanisms of chromium retention based on different iron (oxyhydr)oxides were discussed.

Occurrence and distribution of microplastics in water supply systems: In water and pipe scales.

Microplastic (MP) pollution has received widespread attention; however, its occurrence and distribution in water supply systems, particularly in pipe scales, remains unclear. In this study, MPs were observed in water and pipe scale samples from the drinking water treatment plant (DWTP) and distribution system (DWDS), respectively. The MP concentrations ranged from 13.23 to 134.79 n/L and 569.99 to 751.73 n/kg in the water and pipe scale samples, respectively. The predominant particles in the pipe scales (50-100 µm) were smaller than those in the water samples (> 200 µm). Overall, MP fragments were the most abundant. Of all the identified MPs, nylon and polyvinyl chloride were predominant in the water and pipe scale samples, respectively. Furthermore, the DWTP and DWDS both prevented MPs from entering the tap water, thereby reducing their risk. The results of this study provide direct evidence for the strong adsorption of MPs onto pipe scales, indicating that pipe scale stability may play a role in improving water quality and security. However, the abundance of MPs in pipe scales cannot be ignored. Additionally, the results provide valuable background information on MP pollution in water supply systems.