Esthetic outcomes in orthodontics through digital customization with a lingual appliance system.

BACKGROUND: Contemporary fixed orthodontic appliances are shifting from non-customized pre-adjusted appliances to custom-designed and printed appliances with novel digital setup systems. We are one step closer to precision dentistry and orthodontics using personalized mechanics and custom appliances. However, despite the evidential enhancement and other improvements to fixed appliances, tooth movement is still limited to five degrees of freedom. Opening or closing spaces still requires manually placing elastomeric chains or coil springs. AIM: In this article, we aimed to demonstrate how advancements in CAD/CAM technology, reverse engineering, and digital customization are helping orthodontics constantly evolve, enabling treatment with enhanced esthetics and minimal compliance. The clinical system (InBrace®, Irvine, CA) described in this article uses a patient-specific, digitally designed multiloop NITI wire that delivers friction-free, light, and continuous forces and activates automatically whenever the malocclusion deviates from the digital setup. CONCLUSION: Through digital customization, InBrace allows for automated tooth movement in all six degrees of freedom, including space opening or closure, via programmed non-sliding mechanics. CLINICAL SIGNIFICANCE: Precision orthodontics and personalized treatment have been significant developments in orthodontics recently. This article focuses on how a technologically advanced lingual appliance system could achieve targeted cosmetic results methodically via automation and personalization.

Three-dimensional assessment of virtual bracket removal for orthodontic retainers: A prospective clinical study.

INTRODUCTION: Computer-aided design and manufacturing of orthodontic retainers from digitally debonded models can be used to facilitate same-day delivery. The purpose of this prospective clinical study was to validate a novel technique for virtual bracket removal (VBR) in-office, comparing the accuracy with 2 orthodontic laboratories that use VBR for retainer fabrication in the digital workflow. METHODS: The sample consisted of 40 intraoral scans of 20 patients. Four groups were compared. The scans without brackets were used as a control group. VBR was performed by 3 groups: In-office VBR (Software Meshmixer, version 3.5.474; Autodesk, San Rafael, Calif), Orthodent Laboratory (ODL; Buffalo, NY), and New England Orthodontic Laboratory (NEOLab; Andover, Mass). The virtually debonded models were superimposed onto the control models using surface-based registration. Regional 3-dimensional Euclidean distances between surface points of superimposed models were calculated for comparative analysis of surface changes after VBR using Vector Analysis Module (Canfield Scientific, Fairfield, NJ) software. RESULTS: The accuracy of VBR using the Meshmixer did not differ significantly from the VBR protocols used by the 2 laboratories. However, there was a statistically significant difference between the 2 laboratories, with ODL showing lower accuracy than NEOLab. Although some differences were statistically significant, they were very small and not considered clinically relevant. There was also a statistically significant difference between the 3 tooth segments (incisors, canines/premolars, and first molars), with VBR of the first molars and second premolars showing the least accuracy. CONCLUSIONS: The VBR techniques using the in-office Meshmixer, ODL, and NEOLab were considered accurate enough for the clinical use of orthodontic retainers fabricated from printed models.

Three-dimensional monitoring of root movement during orthodontic treatment.

INTRODUCTION: A significant objective of orthodontic treatment is to achieve proper and stable tooth positions that involve not only the crowns, but also their roots. However, the current methods of clinically monitoring root alignment are unreliable and inaccurate. Therefore, the purpose of this study was to develop a methodology that can accurately identify root position in a clinical situation. METHODS: Pretreatment and posttreatment cone-beam computed tomography (CBCT) and extraoral laser scans of study models of a patient were obtained. Threshold segmentation of the CBCT scans was performed, resulting in 3-dimensional surface models. The pretreatment CBCT teeth were isolated from their respective arches for individual tooth manipulation. These isolated pretreatment CBCT teeth were superimposed onto the posttreatment surface scan depicting the expected root position setup. To validate the accuracy of the expected root position setup, it was compared with the true root position represented by the posttreatment CBCT scan. Color displacement maps were generated to measure any differences between the expected and true root positions. RESULTS: Color map analysis through crown superimposition showed displacement differences of 0.148 ± 0.411 mm for the maxillary roots and 0.065 ± 0.364 mm for the mandibular roots. CONCLUSIONS: This methodology has been demonstrated to be an accurate and reliable approach to visualize the 3-dimensional positions of all teeth, including the roots, with no additional radiation applied.

Monitoring of typodont root movement via crown superimposition of single cone-beam computed tomography and consecutive intraoral scans.

INTRODUCTION: The purpose of this study was to develop a new methodology to visualize in 3 dimensions whole teeth, including the roots, at any moment during orthodontic treatment without the need for multiple cone-beam computed tomography (CBCT) scans. METHODS: An extraoral typodont model was created using extracted teeth placed in a wax base. These teeth were arranged to represent a typical malocclusion. Initial records of the malocclusion, including CBCT and intraoral surface scans, were taken. Threshold segmentation of the CBCT was performed to generate a 3-dimensional virtual model. This model and the intraoral surface scan model were superimposed to generate a complete set of digital composite teeth composed of high-resolution surface scan crowns sutured to the CBCT roots. These composite teeth were individually isolated from their respective arches for single-tooth manipulations. Orthodontic treatment for the malocclusion typodont model was performed, and posttreatment intraoral surface scans before and after bracket removal were taken. A CBCT scan after bracket removal was also obtained. The isolated composite teeth were individually superimposed onto the posttreatment surface scan, creating the expected root position setup. To validate this setup, it was compared with the posttreatment CBCT scan, which showed the true positions of the roots. Color displacement maps were generated to confirm accurate crown superimpositions and to measure the discrepancies between the expected and the true root positions. RESULTS: Color displacement maps through crown superimpositions showed differences between the expected and true root positions of 0.1678 ± 0.3178 mm for the maxillary teeth and 0.1140 ± 0.1587 mm for the mandibular teeth with brackets. Once the brackets were removed, differences of 0.1634 ± 0.3204 mm for the maxillary teeth and 0.0902 ± 0.2505 mm for the mandibular teeth were found. CONCLUSIONS: A new reliable approach was demonstrated in an ex-vivo typdont model to have the potential to track the 3-dimensional positions of whole teeth including the roots, with only the initial CBCT scan and consecutive intraoral scans. Since the presence of brackets in the intraoral scan had a minimal influence in the analysis, this method can be applied at any stage of orthodontic treatment.

A new method to measure mesiodistal angulation and faciolingual inclination of each whole tooth with volumetric cone-beam computed tomography images.

INTRODUCTION: The purpose of this study was to develop a methodology to measure the mesiodistal angulation and the faciolingual inclination of each whole tooth (including the root) by using 3-dimensional volumetric images generated from cone-beam computed tomography scans. METHODS: A plastic typodont with 28 teeth in ideal occlusion was fixed in position in a dry human skull. Stainless steel balls were fixed to the occlusal centers of the crowns and to the apices or bifurcation or trifurcation centers of the roots. Cone-beam computed tomography images were taken and rendered in Dolphin 3D (Dolphin, Chatsworth, Calif). The University of Southern California root vector analysis program was developed and customized to digitize the crown and root centers that define the long axis of each whole tooth. Special algorithms were used to automatically calculate the mesiodistal angulation and the faciolingual inclination of each whole tooth. Angulation measurements repeated 5 times by using this new method were compared with the true values from the coordinate measuring machine measurements. Next, the root points of 8 selected typodont teeth were modified to generate known angulation and inclination values, and 5-time repeated measurements of these teeth were compared with the known values. RESULTS: Intraclass correlation coefficients for the repeated mesiodistal angulation and faciolingual inclination measurements were close to 1. Comparisons between our 5-time repeated angulation measurements and the coordinate measuring machine's true angulation values showed 5 teeth with statistically significant differences. However, only the maxillary right lateral incisor showed a mean difference that might exceed 2.5° for clinical significance. Comparisons between the 5-repeated measurements of 8 teeth with known mesiodistal angulation and faciolingual inclination values showed no statistically significant differences between the measured and the known values, and no measurement had a 95% confidence interval beyond 1°. CONCLUSIONS: We have developed the novel University of Southern California root vector analysis program to accurately measure each whole tooth mesiodistal angulation and faciolingual inclination, in a clinically significant level, directly from the cone-beam computed tomography volumetric images.

Mesiodistal angulation and faciolingual inclination of each whole tooth in 3-dimensional space in patients with near-normal occlusion.

INTRODUCTION: An important objective of orthodontic treatment is to obtain the correct mesiodistal angulation and faciolingual inclination for all teeth. Current techniques are based on crown angulation and inclination standards, and not enough attention has been given to the roots. In this study, we report the mesiodistal angulation and faciolingual inclination of each whole tooth including the root in patients with near-normal occlusion. METHODS: We screened 1840 patients who had cone-beam computed tomography scans taken before treatment to obtain a sample of 76 patients with near-normal occlusion. Using our custom University of Sourthern California root vector analysis software program, we digitized the crown and root centers to determine the "true" long axis of each tooth from where the mesiodistal angulation and the faciolingual inclination were measured. RESULTS: The means and standard deviations for the mesiodistal angulation and the faciolingual inclination of each whole tooth were calculated. The maxillary angulations of the teeth started from approximately 6° for the central incisors, slightly increased for the lateral incisors, and peaked at 11° for the canines; then it gradually decreased to just above 0° for the first molars and eventually reached -6° for the second molars. The mandibular angulations started from about 0° for the incisors and increased to 17.5° for the second molars. The maxillary inclination was the highest at 33.5° for the central incisors, decreased to about 0° at the second premolars, and then increased for the 2 molars. The mandibular inclination also was the highest at 26.5° for the central incisors, decreased also to about 0° at the second premolars, and continued to decrease for the 2 molars. For the opposing tooth pairs, the interdental mesiodistal angulations always remained within 10° from one another, whereas the interdental faciolingual inclination increased from about 120° for the incisors to about 180° for the second premolars and the 2 molars. CONCLUSIONS: We obtained the average mesiodistal angulation and faciolingual inclination for each whole tooth measured from its long axis digitized on the cone-beam computed tomography volumetric images of 76 patients with near-normal occlusion. We found distinctive angulation and inclination relationships between the neighboring and opposing teeth. This information can be used in addition to the crown standards for positioning each whole tooth properly in the arches.

Orthodontics on autopilot through digital customization and Programmed Non-Sliding Mechanics.

Orthodontic tooth movement occurs in six degrees of freedom, which includes opening and closing spaces. Traditionally, opening and closing spaces are achieved with auxiliaries such as power chains or springs because all traditional bracket systems cannot achieve this tooth movement by themselves. The InBrace system has the capability to program tooth movement in all six degrees of freedom, including opening and closing spaces, through digital customization and its use of Programmed Non-Sliding Mechanics.