Are chin and symphysis morphology facial type-dependent? A computed tomography-based study.

INTRODUCTION: The chin is a major determinant of the facial profile; hence, it plays a major role in orthodontics and orthognathic surgery. It is thus essential to follow and better understand its expression in different facial types. The major objectives of the current study were to characterize morphometrically the chin and symphysis and reveal their association with different facial types. METHODS: Computed tomography scans of the head and neck of 311 adults (163 males, 148 females; age range, 18-95 years) were classified into 3 facial types: short, average, and long. Height, width, projection, inclination, thickness, and area were measured on the chin and symphysis. RESULTS: The majority of the population (70%) manifested an average facial type; the other 30% were almost equally distributed between short and long facial types. The long facial type was more common among females and the short facial type among males. Chin projection, area, and size were significantly greater in short-faced patients. Chin width in males was similar for all facial types, whereas, in females, chin width was the widest in the short facial type and the narrowest in the long facial type. Symphysis height was significantly greater in long-faced patients in both sexes. The mandibular incisors' inclination relative to the mandibular plane was not significantly associated with the chin or symphysis morphology. CONCLUSIONS: Chin and symphysis morphology is facial type-dependent. Orthodontists and maxillofacial surgeons should be aware of the complex relationship between facial types and chin/symphysis size and shape when planning treatment.

Rate and pattern of interproximal dental attrition.

Although occlusal and interproximal attrition occur because of diverse etiology and present dissimilar features, both progress with age. The objectives of this study were to reveal the rate and pattern of development of interproximal attrition facets (PAF) with age and to compare those with occlusal attrition (OA) changes. Five-hundred and ninety-four teeth were collected from 198 skulls (of adults, 20-71 yr of age). Three mandibular teeth [first premolar (P1), second premolar (P2), and first molar (M1)] were examined for PAF size and OA rate. Interproximal attrition and OA followed similar patterns of development until subjects reached 40-45 yr of age, after which they took different paths: PAF did not increase in size and were not as large as in younger groups, regardless of facet location, whereas OA continued to progress. The PAF changes with age differed between premolars and molars, unlike OA, which presented a similar rate for all teeth studied. Although OA scores presented significantly moderate correlations with age, PAF area size demonstrated low correlations with age. Low, but significant, correlations were found between the rate of OA and that of PAF. However, PAF and OA exhibited different patterns of development with age. Premolars and molars presented dissimilar development of PAF, which is probably caused by a unique attrition pattern in the molar teeth, different morphology, and force vectors.

Pattern of maxillary and mandibular proximal enamel thickness at the contact area of the permanent dentition from first molar to first molar.

INTRODUCTION: Proximal enamel thickness (PET) at the mesial and distal contact areas of the complete permanent dentition has not been previously reported. Anatomic investigation of PET is essential for interproximal reduction treatment. Our objectives were to measure the PETs of the complete maxillary and mandibular dentitions at the contact areas, to compare the PETs of adjacent teeth, and to evaluate the vertical position of each contact area. METHODS: We evaluated 720 extracted teeth; of these, 109 intact teeth were selected. The mesial and distal contact areas were demarcated, and each tooth was embedded in transparent epoxy resin. Blocks were prepared so that the 2 demarcated contact areas were exposed, and 6 measurements were taken and statistically analyzed. RESULTS: Both jaws showed the same PET pattern characterized by 5 features: PET increased progressively from incisor (0.63 mm) to first molar (1.48 mm). Per tooth, mesial and distal PET did not differ. Total maxillary (26.86 mm) and mandibular (24.52 mm) PETs were similar. Paired PETs at the interproximal interface were similar, with the exception of the lateral incisor-canine interfaces. From incisor to first molar, the contact area becomes located farther gingivally. CONCLUSIONS: The existing guideline of maximal 0.5-mm interproximal reduction per 2 adjacent teeth should be kept in the anterior region and could be increased to 1 mm in the posterior region, when an equal amount is removed.

Proximal attrition facets: morphometric, demographic, and aging characteristics.

Although interproximal attrition is considered to be limited in modern populations, it has important clinical implications. However, in contrast to occlusal attrition, proximal attrition receives limited scientific attention. The main purpose of the current study was to fill this void. Seven-hundred and sixty-five teeth were collected from 255 skulls of subjects 18-75 yr of age. For each individual, three mandibular teeth (the first and second premolars and the first molar) were examined for proximal attrition facets (PAFs). The results provide detailed information on the size, shape, and location of the facets according to age cohort, gender, and ethnicity. The validity of the method used to measure the facets was also examined. The major findings were as follows: PAFs are usually located on the upper half of the crown proximal aspect; in each tooth, the mesial facet is more lingually positioned and the distal facet is more buccally positioned; the majority of the facets are subrectangular in shape; the size of the facets tends to increase in an anteroposterior direction (from premolars to molars); and facet size and location are age- and sex-dependent and ethnicity-independent. It is our recommendation that dentists bear in mind that interproximal attrition is a dynamic, long-term process and needs to be considered in many clinical scenarios.

Long- and short-term effects of headgear traction with and without the maxillary second molars.

INTRODUCTION: A quantitative assessment of maxillary first molar distalization with and without the maxillary second molar (M2) was carried out. METHODS: Fifty-six cervical headgear patients undergoing fixed appliance orthodontic treatment were divided into 2 groups: before (G - M2) and after (G + M2) eruption of the maxillary second molars (ages, 11.87 ± 1.20, and 13.05 ± 1.55 years, respectively). The tightness of the dental contact point (TDCP) and the space between the second premolar and the maxillary first molar were measured at 6 levels of headgear force (0-15 N) at 3 intervals 6 months apart (T0, T1, T2). RESULTS: Relationships were found between space and TDCP, time, and presence or absence of the maxillary second molar at T1 and T2 (P <0.001). The TDCP decreased and space increased with increase in initial headgear force. An increase in initial force beyond 6 to 9 N did not significantly increase the initial maxillary first molar distalization. The G - M2 TDCP and space measurements were similar to those of G + M2 at T2 with the eruption of the maxillary second molar. From T0 to T1, maxillary first molar distalization was greater in G - M2. In comparison with our previous headgear-alone study, initial distalization with a fully bonded appliance was reduced by 4-fold. CONCLUSIONS: Headgear therapy is more effective before the eruption of the maxillary second molar. Once it erupts, the distalization pace of the maxillary first molar is reduced, but it can nevertheless be pursued at a slower pace when the maxillary second molar is present.

Stem cells of the lamina propria of human oral mucosa and gingiva develop into mineralized tissues in vivo.

AIMS: To characterize the mineralized tissue formed constitutively in the supracalvarial region of scid mice by a primitive stem cell population (hOMSC) derived from the lamina propria of the human oral mucosa and gingiva. MATERIAL AND METHODS: Fibrin-hOMSC constructs were cultured for 14 days at which time point they were analysed for the expression of osteoblastic/cementoblastic markers and implanted between the skin and calvaria bones into scid mice. After 8 weeks, the animals were sacrificed and the implantation sites analysed. RESULTS: Two-week-old cultures of fibrin-hOMSC constructs expressed osteogenic/cementogenic markers at the gene level. Macroscopic and radiographic examinations revealed mineralized masses at the implantation sites of fibrin-hOMSC constructs. Histology, histochemistry and immunofluorescence showed mineralized masses consisting of avascular cellular and acellular matrices that stained positively for collagen, Ca, cementum attachment protein, cementum protein 1, bone sialoprotein, alkaline phosphatase, osteocalcin, amelogenin and ameloblastin. Positive anti-human nuclear antigen indicated the human origin of the cells. Atomic force microscopy depicted long prismatic structures organized in lamellar aggregates. CONCLUSIONS: Within the limitation of this study, the results indicate for the first time that fibrin-hOMSC constructs are endowed with the constitutive capacity to develop into mineralized tissues that exhibit certain similarities to cementum and bone.

The arrangement of the interproximal interfaces in the human permanent dentition.

OBJECTIVES: The interproximal interface (IPI) is the interface between two adjacent teeth, i.e., the site where forces are transmitted along the dental arch. We investigated the IPI arrangement of the human permanent dentition. Specifically, the IPI morphometrical characteristics were studied and interpreted within a biomechanical framework. SUBJECTS AND METHODS: A novel in vivo IPI measurement was developed based on diversity in transillumination of Polyvinyl siloxane impression of the interproximal region. The study group included 30 subjects, aged 27, ±4.0 years. Eleven parameters were examined in each of the 26 IPIs of the permanent dentition. RESULTS: The IPI showed intra-arch similarity and interarch diversity between the tooth groups. The IPI shape was predominantly oval (60-100%), yet kidney-shaped in some molars (22-40%). From incisors to molars: the IPI increased significantly (p < 0.001) in size (1.72 to 6.05 mm(2)), occupied more of the proximal wall (7.8-12%), changed its orientation from vertical to horizontal (88.66-14.80°), and was mainly located in the buccal-occlusal quadrant of the proximal wall, chiefly in the molar teeth. CONCLUSIONS: The IPI is a product of proximal wall attrition and is dictated by the mastication forces, number of cusps, and crown inclination. IPI arrangement counteracts the adverse crowding effect of the anterior component of the mastication forces. CLINICAL RELEVANCE: The IPI characteristics found in the present study provide guidelines for crown and proximal filling restorations to meet dental physiology requirements. Further, IPI determines correct tooth alignment and proximal wall stripping applied to resolve arch length deficiency.

Mandibular second molar impaction. Part I: Genetic traits and characteristics.

INTRODUCTION: Detection of mandibular second molar (MM2) impaction is imperative for orthodontic diagnosis and treatment. In this study, we examined a possible genetic trait in MM2 impaction in 2 populations and defined distinctive characteristics. METHODS: Initial panoramic radiographs of patients of Israeli (n = 3500) and Chinese-American (n = 3000) origin, aged 11 to 15 years, were examined. Twelve distinctive characteristics were compared between the unilateral impacted and the nonimpacted sides. RESULTS: A total of 120 subjects with MM2 impaction were found (1.8%). The Chinese-American population had a higher prevalence (n = 71, 2.3%) of MM2 impaction compared with the Israeli population (n = 49, 1.4%; P = 0.004). For the subjects with MM2 impaction, the Israelis had significantly (P = 0.039) fewer bilateral impactions (27%) than did the Chinese-Americans (45%). Mesially inclined impacted MM2s were more common (88% and 89%) in the Israeli and Chinese-American populations, respectively. The unilateral impacted side demonstrated reductions in the distance between the mandibular first molar and the ramus (P <0.001), the length of the mesial root of the MM2 (P <0.001), and the height between the MM2 and the mandibular third molar, and increases in the angulations of the MM2 (P <0.001) and the mandibular third molar (P <0.003). CONCLUSIONS: An autosomal genetic trait is present in MM2 impaction with greater penetrance in the Chinese-American population. Within developmental impediments, the deficient mesial root length of the MM2 is the primary impaction factor.

In-vivo von Mises strains during Invisalign treatment.

INTRODUCTION: The Invisalign (Align Technology, Santa Clara, Calif) force delivery system has not been investigated. Since forces are related to the strains developed on the aligner surface, the behavior of the maxillary incisor and premolar von Mises strains (IVM, PVM) were studied during biweekly wear of an aligner. METHODS: Maxillary aligners (n = 61) were examined from 3 patients requiring maxillary incisor retraction and stationary anchored premolars. Two series of maxillary aligners were manufactured. Series 1 was worn by the patient, and series 2 served for in-vivo measurements with 2 strain gauge rosettes bonded to each aligner on the vestibular sides of the incisor and the premolar. Measurements were taken at days 1, 2, 9, and 15. RESULTS: All aligners demonstrated a peak IVM strain at day 1 (P<0.001); it then decreased at day 2 and plateaued through day 15. No anchorage loss was found in 2 patients (IVM ≥ PVM), and a minute loss was evident in 1 patient (PVM>IVM). CONCLUSIONS: Each aligner should be worn close to 24 hours in the first 2 days, with the time subsequently reduced (remaining 12 days). Final aligners should be thicker or worn for longer period (eg, 3 weeks). In spite of the inherent anchorage property of the aligner, attachment reinforcement should be considered in demanding anchorage requirements.

Variation in Chin and Mandibular Symphysis Size and Shape in Males and Females: A CT-Based Study.

The chin is a unique anatomical landmark of modern humans. Its size and shape play an important role from the esthetic perspective. However, disagreement exists in the dental and anthropological literature regarding the sex differences in chin and symphysis morphometrics. The "sexual selection" theory is presented as a possible reason for chin formation in our species; however, many other contradictory theories also exist. This study's aims were therefore to determine how chin and symphysis size and shape vary with sex, and to discuss "sexual selection" theory as a reason for its formation. Head and neck computed tomography (CT) scans of 419 adults were utilized to measure chin and symphysis sizes and shapes. The chin and symphysis measures were compared between the sexes using an independent-samples t-test, a Mann-Whitney test, and the F-statistic. The chin width was significantly greater in males than in females (p < 0.001), whereas the chin height, area, and size index were significantly greater in females (p < 0.001). Symphysis measures did not differ significantly between the sexes. Size accounted for 2-14% of the chin variance and between 24-33% of the symphysis variance. Overall, the chin was found to be a more heterogeneous anatomical structure than the symphysis, as well as more sexually dimorphic.

Upper Lip Horizontal Line: Characteristics of a Dynamic Facial Line.

Background: Upper lip appearance received major attention with the introduction of diverse treatment modalities, including lip augmentation, rhinoplasty surgery, and dental treatment designed to support the upper lip. Our objectives were to define the prevalence and characteristics of the upper lip horizontal line (ULHL), which is a dynamic line appearing during a smile, in relation to gender, malocclusions, aging, and facial morphology. Methods: First, the prevalence and gender distribution of ULHL was examined from standardized en-face imaging at full smile of 643 randomly selected patients. Second, cephalometric and dental cast model analyses were made for 97 consecutive patients divided into three age groups. Results: ULHL appears in 13.8% of the population examined, and prevailed significantly more in females (78%). The prevalence of ULHL was not related to age nor to malocclusion. Patients presenting ULHL showed shorter upper lip and deeper lip sulcus. The skeletal pattern showed longer mid-face, shorter lower facial height and greater prevalence of a gummy smile. Conclusions: Female patients with short upper lip, concavity of the upper lip, and gummy smile are more likely to exhibit ULHL. The ULHL is not age-related and can be identified in children and young adults. Therefore, it should be considered when selecting diverse treatment modalities involving the upper lip.

Duration of elastomeric separation and effect on interproximal contact point characteristics.

INTRODUCTION: The common protocol of a week-long duration of elastomeric separators to facilitate band placement usually causes discomfort. In this study, we examined the minimum separation time required to create an interproximal space >0.16 mm (band thickness), the interproximal changes over 24 hours after separator removal, and the mechanical characteristics of various separators. METHODS: Thirty subjects, ages 28.1 +/- 2.8 years, had an elastomeric separator placed between the mandibular second premolar and first molar (CP5-6) for 1, 4, 12, and 24 hours. After separator removal, CP5-6 was measured for space and tightness of dental contact point (TDCP) changes up to 24 hours after separator removal. The mechanical behaviors of 6 manufacturers' separators were compared. RESULTS: After 12 and 24 hours of separation, all patients demonstrated space >0.16 mm (P <.001). A significant negative correlation (R = -0.59 to -0.63; P = .001) was found between baseline TDCP and the space measured at separator removal. A biphasic viscoelastic recovery (82%-95%) to baseline tightness level occurred within 24 hours. Variation between manufacturers was low (9%). CONCLUSIONS: Separators should be placed a day before banding. The patient should arrive 3 to 4 hours before the appointment for separator replacement if the separator is lost. Rapid recovery after separation removal implies the biological soundness of elastomeric separation regardless of the manufacturer used.

Duration and anchorage management of canine retraction with bodily versus tipping mechanics.

OBJECTIVE: To compare tipping mechanics (TM) and bodily mechanics (BM) with respect to duration, angulation, and anchorage loss during canine retraction. MATERIALS AND METHODS: TM and BM brackets were bonded to the upper right and left canines, respectively, of 14 subjects requiring maxillary first premolar extractions. The upper canines were retracted with variable nickel titanium closed coil springs (F = 0.50 or 0.75 N) attached posteriorly to a Nance anchorage appliance through the first molars. Panoramic radiographs and dental casts were taken at five time points. Canine angulation was assessed with custom metallic jigs inserted into the vertical slots of the canine brackets prior to radiographic exposure. RESULTS: The canine crown contacted the second premolar after 102.2 +/- 106 and 99.0 +/- 80.0 days, and achieved root uprighting in 72.0 +/- 31.3 and 37.2 +/- 42.7 additional days with the TM and BM groups, respectively. Only the uprighting stage differed significantly between the two mechanics (P < .05). During retraction, tooth angulation differed significantly (P < .001) between the TM (6 degrees ) and BM (-0.8 degrees ) groups. Anchorage loss, as assessed by mesial molar movement, was 1.2 +/- 0.3 mm and 1.4 +/- 0.5 mm for the TM and BM groups, respectively. CONCLUSIONS: Bodily canine retraction occurred faster (38 days) than tipping due to a shorter duration of root uprighting. Anchorage loss (17%-20%) was similar for both retraction methods, ie, maximum anchorage could not be provided by the Nance appliance. Both TM and BM brackets had inadequate rotational control of the retracted canine.

Labial cervical vertical groove (LCVG) distribution and morphometric characteristics.

OBJECTIVE: Labial cervical vertical groove (LCVG), a dental anomaly found at the cervical region of upper permanent incisors, can be of esthetic, periodontal and prosthetic concern. The aim of this study was to define the prevalence and characteristics of LCVG. DESIGN: Of the 1250 examined subjects, 66 exhibited an LCVG. This group (age 19.7+/-11.4 years) was then compared with a matched No-LCVG (control) group of 49 subjects (age 17.9+/-5.7 years). Six LCVG characteristics were examined: distribution, severity and location of LCVG in central (I(1)) and lateral (I(2)) permanent maxillary incisors, Angle's classification, gender and presence of LCVG in siblings. RESULTS: Total LCVG prevalence was 5.3% (single 3.76%; multiple 1.53%), found predominantly in I(1) (93.9%) compared with I(2) (p=0.001). The anomaly presented mostly as a single configuration (71.21%); double configuration was predominantly homological bilateral, i.e., I(1)+I(1), or I(2)+I(2) (88%). LCVG in I(2) was mainly associated with multi-configuration (75%). The severe form occurred only in I(1). A mid-crown LCVG allocation was distinctive in I(1) (62.2%, p=0.001) and mesial-crown in I(2) (66.7%, p=0.038). LCVG was found mostly in males (p=0.045). In the LCVG group 16.7% were siblings. CONCLUSIONS: LCVG primarily involved I(1) in single configuration as the target assaulted tooth and secondarily I(2) mostly as a multi-configuration. The genetic impact on LCVG formation was primarily supported by the high prevalence in siblings and secondarily by the favourable occurrence in males, exclusive pattern of allocation within the crown and high occurrence of bilateral double-configuration LCVG.

Centric slide, bite force and muscle tenderness changes over 6 months following fixed orthodontic treatment.

OBJECTIVE: The postorthodontic change of the masticatory muscles was evaluated using three parameters: maximal voluntary bite force (MVBF), slide in centric (difference between maximal intercuspation and retruded contact position), and muscle sensitivity to palpation. MATERIALS AND METHODS: MVBF was measured with a custom-made rubber tube bite force device, centric slide with a digital caliper, and sensitivity to palpation of the masseter and temporalis muscles (scale 0-3) during application of standardized digital force (10 N). Data were collected at four time points: T0, before bracket removal; T1, immediately after bracket removal; T2, after 3 months of retention; and T3, after 6 months of retention. Patients (n = 41; 22 females, 19 males; mean age 17.4 +/- 5.4 years) were examined from T0 to T1 and from T1 to T2. Of these, 28 (15 females, 13 males) were followed at T3. RESULTS: Immediately after bracket removal (T0 to T1), MVBF increased significantly by 15%. Another significant increase (15.5%) was found 3 months posttreatment (T1-T2), and almost no increase (2%) at 6 months (T2-T3). The slide in centric remained within normal values during the three time points. A decline in sensitivity to palpation from T1 to T3 was found for both masseter and temporalis muscles. CONCLUSIONS: Neuromuscular adaptability begins within several minutes after bracket removal. A second stage of muscular adaptation occurs within 3 months of retention. These findings suggest that muscular adjustment occurs within a short period after orthodontic treatment.

Bracket placement in lingual vs labial systems and direct vs indirect bonding.

OBJECTIVE: To examine the ultimate accuracy of bracket placement in labial vs lingual systems and in direct vs indirect bonding techniques. MATERIALS AND METHODS: Forty pretreatment dental casts of 20 subjects were selected. For each dental cast, four types of bracket placement were compared: labial direct (LbD), labial indirect (LbI), lingual direct (LgD), and lingual indirect (LgI). Direct bonding was performed with the casts held in a mannequin head. Labial brackets were oriented with a Boone gauge, and lingual brackets were oriented with the Lingual-Bracket-Jig System. Torque error (TqE) and rotation deviation (RotD) were measured with a torque geometric triangle and a toolmaker's microscope, respectively. Both torque and rotational measurements were evaluated statistically as algebraic and absolute numeric values, using analysis of variance with repeated measures. RESULTS: Absolute TqE and RotD were significantly (P < .001) higher in direct than in indirect bonding techniques higher in both the labial and lingual bracket systems by twofold and threefold, respectively (LbD = 7.26 degrees , 1.06 mm; vs LbI = 3.02 degrees , 0.75 mm; LgD = 8.42 degrees , 1.13 mm; vs LgI = 3.18 degrees , 0.55 mm). No statistically significant difference was found between labial and lingual systems for the same bonding technique. Maxillary incisors demonstrated the largest RotD angle (eg, right lateral: 12.04 degrees ). A distal off-center RotD was predominant in the mandibular dentition. CONCLUSIONS: Labial and lingual systems have the same level of inaccuracy. For both systems, indirect bonding significantly reduces absolute TqE and RotD. The TqE found can cause transverse discrepancy (scissors or crossbite) combined with disclusion with antagonist teeth. The RotD found can result in irregular interproximal contact points.

Comparative study of 3 types of toothbrushes in patients with fixed orthodontic appliances.

INTRODUCTION: Plaque and trapped debris that accumulate gingivally to orthodontic wire are difficult to remove. The triple-headed toothbrush (TH-TB) was designed to reach the gingival tooth margin. In this study, we examined its effectiveness in improving the oral health of orthodontic patients as compared with conventional and orthodontic toothbrushes. METHODS: Orthodontic patients (n = 94; mean age, 15.6 +/- 3.9 years) receiving edgewise treatment in both arches were randomly assigned to 1 of 3 groups (TH-TB, orthodontic toothbrush, and conventional toothbrush). After toothbrushing instruction, each participant received professional tooth cleaning. Tooth plaque index, bracket plaque index, gingival index, and bleeding index were recorded at baseline and after 4 weeks of usage. Satisfaction level was obtained after 4 weeks. RESULTS: The TH-TB was significantly more effective than conventional and orthodontic toothbrushes in tooth-plaque removal by 2-fold and 1.5-fold, respectively (P < .001); in bracket-plaque removal by 3-fold and 2-fold, respectively (P < .001); and in improving gingival health by 6-fold and 1.5-fold, respectively (P = .011). Patients who used the TH-TB were significantly more satisfied than those who used the other toothbrushes (P < .001). CONCLUSIONS: The TH-TB is a practical alternative to other manual toothbrushes to improve tooth and gingival health in orthodontic patients wearing fixed appliances.

In vivo debonding strength and enamel damage in two orthodontic debonding methods.

Bracket debonding strength related to diverse debonding methods and enamel damage has not been assessed in vivo. The study hypothetized a direct relationship between these three parameters. Debonding strength was measured clinically in the wings method and base method on 50 patients in a split mouth method using a calibrated debonding plier. Brackets from 30 of these patients were scanned in SEM and EDAX for adhesive remnant index and enamel calcium remnants. Base method debonding force was significantly greater than wings method (163.5+/-68.7 N, 106.1+/-66.2 N, respectively, p < 0.001). A positive adhesive remnant index score was found in both methods (68.7%, 66.7%, respectively). Debonding strength vs. adhesive remnant index or calcium index scores were not correlated. However, the latter two were significantly correlated (0.524 < R < 0.895, p < 0.031). Half of the debonding failures developed at the adhesive enamel interface. The results warnts the potential of enamel damage during debonding.

Labial-cervical-vertical groove in maxillary permanent incisors--prevalence, severity, and affected soft tissue.

OBJECTIVES: To investigate the prevalence and severity of a labial-cervical-vertical groove (LCVG) in maxillary permanent incisors and its effect on the associated gingival tissue. METHODS: A total of 600 adolescents (293 boys and 307 girls, mean age 13.6+/-1.99 years) were randomly selected and examined for the presence of LCVG. The deformity was classified as mild, moderate, or severe according to predetermined criteria. Gingival coverage at the groove site was defined as normal, partial, and irregular. RESULTS: LCVG was found in 27 adolescents (4.5%). It was unilateral in 24 (89%) and bilateral in 3 (11%). The ratio of central to lateral incisors was 29:1. No sexual dimorphism or side prevalence were found. Mild LCVG was found in 22 incisors, moderate LCVG in 7 incisors, and severe LCVG in one incisor. Moderate LCVG was 5 to 6 times more susceptible to partial or irregular coverage of the gingival margin than mild LCVG. The gingival sulcus in teeth with LCVG demonstrated a significant (P = .001) increase in depth compared to non-LCVG teeth (1.55+/-0.90 mm vs 1.18+/-0.75 mm). CONCLUSIONS: An LCVG is a deformity confined predominantly to a single permanent maxillary central incisor. Its prevalence is not connected with gender. Most LCVGs are mild and often difficult to detect. However, the greater the severity, the more gingival irregularity is associated. This and the increase in sulcus depth in LCVG incisors are adverse predispositions for periodontal sequelae, calling for cautious oral hygiene maintenance.

Comparison of lateral photographic and radiographic sagittal analysis in relation to Angle's classification.

OBJECTIVE: The goal of this study was to compare sagittal jaw relationships derived from standardized profile photographs (soft tissue) to those derived from lateral cephalograms (hard tissue) with respect to Angle's classification of malocclusion. METHODS: A total of 110 randomly selected subjects (mean age: 13.75 ± 1.46 years) undergoing treatment (Postgraduate Program in Orthodontics at Tel Aviv University) were assigned to three groups based on Angle's classification (Class I: n = 30; Class II: n = 50; Class III: n = 30). Standardized profile-view photographs and lateral radiographs (cephalograms) were compared using 11 soft tissue and 8 skeletal measurements, respectively. RESULTS: Tragus, infra-orbital, nasion, A point, B point, and pogonion were found to be the most reliable soft tissue reference points. A similar pattern of diversity was found between the three groups of Angle's classification (Class I/II/III) for the photographic soft,-tissue and the radiographic skeletal measurements (e.g., soft tissue A'N'B' =11.43°/13.30°/8.85° and hard tissue ANB = 3.13°/4.64°/-1.31°). Soft tissue A'N'B' measurement provides complementary information to hard tissue ANB measurement. CONCLUSION: Analyzing profile photographs for evaluating sagittal jaw relationships is a practical tool in determining soft tissue harmony. Soft tissue measurements provide a sagittal differential diagnosis in relation to Angle's classification of malocclusion.