Identification of the safe(r) by design alternatives for nanosilver-enabled wound dressings.

The use of silver nanoparticles (NPs) in medical devices is constantly increasing due to their excellent antimicrobial properties. In wound dressings, Ag NPs are commonly added in large excess to exert a long-term and constant antimicrobial effect, provoking an instantaneous release of Ag ions during their use or the persistence of unused NPs in the wound dressing that can cause a release of Ag during the end-of-life of the product. For this reason, a Safe-by-Design procedure has been developed to reduce potential environmental risks while optimizing functionality and costs of wound dressings containing Ag NPs. The SbD procedure is based on ad-hoc criteria (e.g., mechanical strength, antibacterial effect, leaching of Ag from the product immersed in environmental media) and permits to identify the best one among five pre-market alternatives. A ranking of the SbD alternatives was obtained and the safer solution was selected based on the selected SbD criteria. The SbD framework was also applied to commercial wound dressings to compare the SbD alternatives with products already on the market. The iterative procedure permitted to exclude one of the alternatives (based on its low mechanical strength) and proved to be an effective approach that can be replicated to support the ranking, prioritisation, and selection of the most promising options early in the innovation process of nano-enabled medical devices as well as to encourage the production of medical devices safer for the environment.

Synergistic effect of sericin and keratin in gelatin based nanofibers for in vitro applications.

Protein-based nanomaterials are gaining growing interest in biomedical field. The present paper evaluates the physico-chemical properties of electrospun nanofibers resulting from the combination of gelatin with keratin (from wool) and sericin (from silk) to validate their use for in vitro interaction studies. We demonstrated that that presence of sericin influences the fiber morphology at macroscopic level - i.e., wide diameter distributions by SEM and image analysis - with effects on chemical - i.e., a decrease of hydrogen bonds of NH groups verified by infrared spectroscopy - and thermal behavior of electrospun nanofibers, in comparison with gelatin-based ones. Moreover, we verified that sericin, in combination with keratin macromolecules, can amplify the biochemical signal of gelatin, improving the in-vitro stability of gelatin-based nanofibers. In vitro results confirm a synergistic effect of sericin and keratin on human Mesenchymal Stem Cells (hMSC) proliferation - increase over 50% respect to other types - associated to the enhancement of in vitro stability directly ascribable to the peculiar physical interaction among the proteins. These findings suggest the use of sericin/keratin/gelatin enriched electrospun fibers as nanostructured platforms for interface tissue engineering.

Engineering of keratin functionality for the realization of bendable all-biopolymeric micro-electrode array as humidity sensor.

The technological quest for flexible devices to be interfaced with the biological world has driven the recent reinvention of bioderived polymers as multifunctional active and passive constituent elements for electronic and photonic devices to use in the biomedical field. Keratin is one of the most important structural proteins in nature to be used as biomaterial platform in view of the recently reported advances in the extraction and processing from hair and wool fibers. In this article we report for the first time the simultaneous use of naturally extracted keratin as both active ionic electrolyte for water ions sensing and as bendable and insoluble substrate into the same multielectrode array-based device. We implemented the multifunctional system exclusively made by keratin as a bendable sensor for monitoring the humidity flow. The enhancement of the functional and structural properties of keratin such as bendability and insolubility were obtained by unprecedented selective chemical doping. The mechanisms at the basis of the sensing of humidity in the device were investigated by cyclic voltammetry and rationalized by reversible binding and extraction of water ions from the volume of the keratin active layer, while the figures of merit of the biopolymer such as the ionic conductivity and relaxation time were determined by means of electrical impedance and dielectric relaxation spectroscopy. A reliable linear correlation between the controlled-humidity level and the amperometric output signal together with the assessment on measure variance are demonstrated. Collectively, the fine-tuned ionic-electrical characterization and the validation in controlled conditions of the free-standing insoluble all-keratin made microelectrode array ionic sensor pave the way for the effective use of keratin biopolymer in wearable or edible electronics where conformability, reliability and biocompatibility are key-enabling features.

Nanogrooves and keratin nanofibers on titanium surfaces aimed at driving gingival fibroblasts alignment and proliferation without increasing bacterial adhesion.

Periimplantitis and epithelial downgrowth are nowadays the main conditions associated to transmucosal dental implants. Gingival fibroblasts can play an important role in periimplantitis because they are the promoters of the inflammatory process and eventual tissue homeostasis and destruction. Moreover, the related inflammatory state is commonly driven also to counteract bacteria implants colonization. In the present research, a new technology based on mechanically produced nanogrooves (0.1-0.2µm) and keratin nanofibers deposited by electrospinning has been proposed in order to obtain titanium surfaces able to drive gingival fibroblasts alignment and proliferation without increasing bacterial adhesion. The prepared surfaces have been characterized for their morphology (FESEM), chemical composition (FTIR, XPS), surface charge (zeta potential) and wettability (contact angle). Afterwards, their performances in terms of cells (human primary gingival fibroblasts) and bacteria (Staphylococcus aureus) adhesion were compared to mirror-like polished titanium surfaces. Results revealed that gingival fibroblasts viability was not negatively affected by the applied surface roughness or by keratin nanofibers. On the opposite, cells adhesion and spread were strongly influenced by surface roughness revealing a significant cell orientation along the produced nanogrooves. However, the keratin influence was clearly predominant with respect to surface topography, thus leading to increased cells proliferation on the surfaces with nanofibers, disregarding the presence of the surfaces grooves. Moreover, nor nanogrooves nor keratin nanofibers increase bacterial biofilm adhesion in comparison with mirror polished surfaces. Thus, the present research represents a promising innovative strategy and technology for a surface modification finalized to match the main requirements for transmucosal dental implants.