Functionalized carbon nanotubes as the pseudostationary phase for capillary EKC separation of non-steroidal anti-inflammatory drugs.

Functionalized multiwalled carbon nanotubes (f-MWCNTs) can serve as the pseudostationary phase (PSP) for the capillary EKC separation of non-steroidal anti-inflammatory drugs (NSAIDs). To increase their hydrophilicity, we treated MWCNTs, with a sonochemical process in a concentrated nitric/sulfuric acid mixture. The oxidized MWCNTs were then characterized by FT-IR, transmission electron microscopy, and X-ray photoelectron spectroscopy. We evaluated the potential of the PSP and the effects of buffer composition, pH, addition of organic modifier, and injection temperature on the NSAID separation. The PSP created a network structure of pi-pi interactions, hydrophobic forces, hydrogen bonding, and electrostatic interactions to separate NSAIDs, providing a different separation mode from SDS micelles. We achieved complete separation of six NSAIDs using a mixture of a borate buffer (75 mM, pH 10) with methanol (5%, v/v) containing 0.02 mg/mL f-MWCNTs, an applied voltage of +12 kV and detection at 214 nm. Better precision was obtained with a low injection temperature. The method was also satisfactorily applied to the analysis of NSAIDs spiked into a urine sample.

Novel stationary phase for complexation gas chromatography originating from ionic liquid and metallomesogen.

A metallomesogen of a polycatenar oxazoline copper(II) complex, [Cu(S-C(12))(2)], that exhibited a columnar mesophase with a helical organization was prepared and employed as the stationary phase for the GC separation with polycyclic aromatic hydrocarbons (PAHs) as model compounds. For introducing the mesogen into the capillary column, an ionic liquid (BeMIM-TfO) was used as the vehicle. The results of thermal analyses and UV-vis spectroscopy indicated that some beneficial interactions occurred between the metallomesogen and the ionic liquid. Various parameters affecting the separation efficiency were studied. Different ratios of BeMIM-TfO and Cu(S-C(12))(2) (1:0, 1:1, 1:2 and 1:3 (w/w)) were tested for the separation of the PAHs. As the amount of Cu(S-C(12))(2) was increased, complete separation could be achieved. The stationary phase with the ratio of 1:1 provided the most satisfactory result having average theoretical plate number of 5.2 x 10(3)plates/m. With an optimized temperature program, 11 PAH mixtures were completely separated within 27 min. The interaction between PAH and these fascinating and interesting stationary phases was discussed.

Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography.

A monolithic molecularly imprinted polymer (MIP) column was prepared as the stationary phase for the capillary electrochromatographic (CEC) separation of a group of structurally related compounds including dopamine (DA), (±)-epinephrine (EP), (-)-isoproterenol (ISO), (±)-norepinephrine (NE), (±)-octopamine (OCT), and (±)-synephrine (SYN). Here, (-)-NE was used as the template. Either methacrylic acid (MAA) or itaconic acid (IA) together with a mixture of ethylene glycol dimethacrylate (EDMA) and α,α'-azobis(isobutyronitrile) (AIBN) in N,N-dimethylformamide (DMF) was introduced into a pre-treated, silanised, fused-silica capillary by a thermal non-covalent polymerisation procedure. Optimised conditions for the polymerisation reaction were assessed by the separation efficiency of the template. Both the template/monomer/cross linker molar ratio and the compositions of the functional monomer, cross-linker, and porogen affected polymerisation. The optimum in situ polymerisation reaction was performed at 65 °C for 17 min. By varying CEC parameters like eluent composition and pH, we observed that the addition of SDS to the eluent clearly improved the CEC separations. With a mobile phase of citrate buffer (10 mM, pH 3)/SDS (40 mM)/acetonitrile (2/2/1, v/v/v) solution and an applied voltage of 10 kV, the six related structures of the template and their enantiomeric mixtures were satisfactorily separated at 30 °C.

Preparation and characterization of monoliths covalently bonded chelating groups for capillary electrochromatographic separation of metal ions.

In this work, a novel polymer-based monolithic column was prepared using an o-phthalaldehyde-l-phenylalanine Schiff base complex as the reactive center and a mixture of methanol and n-propanol as the porogen. The monolithic column was employed for the separation of a metal ion mixture including Pb(II), Mn(II), Cu(II), Ni(II), Cr(III), Fe(III) and Cr(VI). Tetrabutylammonium bromide (TBAB) was used as a mobile phase additive to enhance the separation efficiency of metal ions by EDTA precomplexation. Using a phosphate buffer (20 mM, pH 3.0), TBAB (10 mM), MeOH (15%, v/v), an applied voltage of -15 kV, and detection at 220 nm, the metal ion mixture was satisfactorily resolved. The average theoretical plate number was 17,900 plates/m. The separation was also carried out in the absence of TBAB, leading to dissimilar elution order and shorter retention time. The separation behavior of the monolithic column was also compared with that of the blank polymer. The unique properties of the monolithic column might be mediated by a combination of electrophoretic behavior and chromatographic retention involving hydrophobic and hydrophilic interactions, as well as ligand exchange.

Preparation and application of ionic liquid-coated fused-silica capillary fibers for solid-phase microextraction.

A simple and cost effective solid-phase microextraction device has been developed. Fused-silica capillaries were etched with ammonium hydrogen difluoride prior to coating with an ionic liquid. For comparison, both a bare fused-silica capillary and one pretreated with a Nafion membrane were coated with the ionic liquid. All three coated capillaries were employed for the head space microextraction of polycyclic aromatic hydrocarbons (PAHs) which were then separated with an established GC system. Efforts to optimize the extraction process indicated that the etched fiber displayed the most efficient extraction, giving not only highly reproducible extraction results but also greater extraction efficiency. The Nafion membrane-supported fiber was inferior to the etched fiber, while the untreated fused-silica had the lowest extraction efficiency. The Nafion membrane contains negatively charged sulfonate groups, and the increase in ionic liquid binding was due to electrostatic attractive forces. However, due to the hydrophobic interactions of the PAHs with the polymer matrix in the Nafion membrane, a more complex adsorption/desorption mechanism might reduce the efficiency. The established method was successfully applied for the analysis of PAHs released from burning of mosquito coil incense.

Separation of corticosteroids by microemulsion EKC with diethyl L-tartrate as the oil phase.

A novel microemulsion based on a mixture of diethyl L-tartrate (DET) and SDS was developed for the microemulsion EKC (MEEKC) determination of structurally related steroids. The system consisted of 0.5% w/w DET, 1.7% w/w SDS, 1.2% w/w 1-butanol, 89.6% w/w phosphate buffer (40 mM, pH 7.0), and 7% w/w ACN. With an applied voltage of +10 kV, a baseline separation of aldosterone (A), cortisone acetate (CA), dexamethasone (D), hydrocortisone (H), hydrocortisone acetate (HA), prednisolone (P), prednisolone acetate (PA), prednisone (Ps), triamcinolone (T), and triamcinolone acetonide (TA) could be achieved. Under the optimized conditions, the reproducibility of the retention time (n = 4) for most of the compounds was less than +/-0.8% with the exception of A, Ps, and T. The average number of theoretical plates was 18 800 plates/m. The results were compared with those achieved by the modified micellar EKC (MEKC). MEEKC showed obvious advantages over MEKC for the separation of highly hydrophobic substances. To further evaluate the system, we tested the MEEKC method by analyzing corticosteroids in a spiked urine sample.

A novel monolithic column for capillary electrochromatographic separation of oligopeptides.

A monolithic column was prepared using l-phenylalanine as template and a covalent approach through the formation of Schiff base with o-phthalaldehyde (OPA). OPA, allylmercaptan, l-phenylalanine, and triethylamine were stirred at first, then methacrylic acid, 2-vinylpyridine, ethyleneglycol dimethacrylate, alpha,alpha-azobisisobutyronitrile, and 1-propanol were added to the reaction mixture. The resulting material was introduced into a capillary column. Following thermal polymerization, the template was then extracted with a mixture of HCl and methanol. The column was employed for the capillary electrochromatographic separation of oligopeptides. A capillary column of 75 (50) cm x 75 microm ID with a mobile phase of phosphate buffer (pH 7.0, 40 mM)/methanol (5%, v/v), an applied voltage of +15 kV, and detection at 214 nm, could baseline separate angiotensin I, angiotensin II, [Sar1, Thr8] angiotensin, oxytocin, vasopressin, tocinoic acid, beta-casomorphin bovine, beta-casomorphin human, and FMRF amide within 20 min. The separation behavior of the templated polymer was also compared with that of the non-templated polymer. As a result, it can be concluded that the electrochromatographic separation of this set of peptides was mediated by a combination of electrophoretic migration and chromatographic retention involving hydrophobic, hydrogen bonding, electrostatic as well as the Schiff base formation with OPA in the cavity of the templated polymer.

Speciation of selenium compounds by open tubular capillary electrochromatography-inductively coupled plasma mass spectrometry.

We introduce a T-type interface and a crossflow nebulizer to find ways to combine CEC with inductively coupled plasma MS (ICP-MS) detection for selenium speciation. For CEC separation, we employed a macrocyclic polyamine-bonded phase capillary as the separation column and a bare fused-silica capillary filled with the make-up liquid (0.05 M HNO3). The effect of nebulizer gas flow rate, make-up liquid flow, type, concentration and pH of the mobile phase on the separation have been studied. Tris buffer of 50 mM at pH 8.50 gave the best performance for selenium speciation. The reproducibility of the retention time indicated that sample injection by electrokinetic and nebulizer gas flow was better than that by self-aspiration alone. The detection limits for selenate, selenite, selenocystine and selenomethionine were found to be 2.40, 3.53, 12.86 and 11.25 ng/mL, respectively. Due to the high sensitivity and element-specific detection, as well as the high selectivity of the bonded phase, quantitative analysis of selenium speciation in urine was also achieved.