I2-DMSO-Mediated Construction of 2,3- and 2,4-Disubstituted Pyrimido[1,2-b]indazole Skeletons.

An efficient synthetic method for constructing 2,3- and 2,4-disubstituted pyrimidio[1,2-b]indazole skeletons through I2-DMSO-mediated and substrate-controlled regioselective [4 + 2] cyclization is reported. The reaction conditions are mild, its operation is simple, and the substrate scope is wide. More than 60 pyrimidio[1,2-b]indazole derivatives have been synthesized, providing a new methodology for constructing related molecules and potentially enriching bioactive-molecule libraries.

Pore confined time-of-flight secondary ion electrochemical mass spectrometry.

Molecular structure conversion concomitant with mass transfer processes at the electrode-electrolyte interfaces plays a central role in energy electrochemistry. Mass spectrometry, as one of the most intuitive, sensitive techniques, provides the capability to collect transient intermediates and products and uncover reaction mechanisms and kinetics. In situ time-of-flight secondary ion electrochemical mass spectrometry with inherent high mass and spatiotemporal resolution has emerged as a promising strategy for investigating electrochemical processes at the electrode surface. This review illustrates the recent advancements in coupling time-of-flight secondary ion mass spectrometry and electrochemistry to visualize and quantify local dynamic electrochemical processes, identify solvated species distribution, and disclose hidden reaction pathways at the molecular level. Moreover, the key challenges in this field are further discussed to promote new applications and discoveries in operando studying the dynamic electrochemical interfaces of advanced energy systems.

20.67%-Efficiency Inorganic CsPbI3 Solar Cells Enabled by Zwitterion Ion Interface Treatment.

All-inorganic CsPbI3 perovskite solar cells (PSCs) have been extensively studied due to their high thermal stability and unprecedented rise in power conversion efficiency (PCE). Recently, the champion PCE of CsPbI3 PSCs has reached up to 21%; however, it is still much lower than that of organic-inorganic hybrid PSCs. Interface modification to passivate surface defects and minimize charge recombination and trapping is important to further improve the efficiency of CsPbI3 PSCs. Herein, a new zwitterion ion is deposited at the interface between electron transporting layer (ETL) and perovskite layer to passivate the defects therein. The zwitterion ions can not only passivate oxygen vacancy (VO ) and iodine vacancy (VI ) defects, but also improve the band alignment at the ETL-perovskite interface. After the interface treatment, the PCE of CsPbI3 device reaches up to 20.67%, which is among the highest values of CsPbI3 PSCs so far. Due to the defect passivation and hydrophobicity improvement, the PCE of optimized device remains 94% of its original value after 800 h storing under ambient condition. These results provide an efficient way to improve the quality of ETL-perovskite interface by zwitterion ions for achieving high performance inorganic CsPbI3 PSCs.

Single Particle Hopping as an Indicator for Evaluating Electrocatalysts.

The design and screening of electrocatalysts for gas evolution reactions suffer from little understanding of multiphase processes at the electrode-electrolyte interface. Due to the complexity of the multiphase interface, it is still a great challenge to capture gas evolution dynamics under operando conditions to precisely portray the intrinsic catalytic performance of the interface. Here, we establish a single particle imaging method to real-time monitor a potential-dependent vertical motion or hopping of electrocatalysts induced by electrogenerated gas nanobubbles. The hopping feature of a single particle is closely correlated with intrinsic activities of electrocatalysts and thus is developed as an indicator to evaluate gas evolution performance of various electrocatalysts. This optical indicator diminishes interference from heterogeneous morphologies, non-Faradaic processes, and parasitic side reactions that are unavoidable in conventional electrochemical measurements, therefore enabling precise evaluation and high-throughput screening of catalysts for gas evolution systems.

Nocardia infection following ocular surface surgery.

OBJECTIVE: To investigate the clinical characteristics and treatment outcomes of Nocardia infection after ocular surface surgery. METHODS: This is a retrospective study. Eight cases of culture-proven Nocardia infection, which developed within 1 month after ocular surface surgery were included. Demographics and clinical history of patients were investigated. RESULTS: There were 8 eyes (2 left and 6 right) of 8 patients (5 males and 3 females), aged 27-65, with a median age of 52.9 years. Three cases underwent pterygium excision, three were subjected to conjunctival flap covering, and two were treated with lamellar corneal transplantation. The time interval between previous surgery and the onset of symptoms varied from 7 to 28 days (mean = 20.5 ± 7.13 days). All the cases presented grey-white infiltrates at the surgical incision site while appearing with six corneal ulcers and two conjunctival ulcers. Filaments of Nocardia were founded by confocal microscopy in two of the five cases. All responded poorly to medical therapy. Seven of the eight cases were treated with reoperation. Nocardia infection recurred in three cases after reoperation, and one was eviscerated. CONCLUSIONS: Surgical trauma is a risk factor for ocular Nocardia infection. Nocardia infection should be suspected when secondary infection occurs in a surgical incision with an atypical clinical presentation. The use of corticosteroids may influence the efficacy of drugs. Complete removal of lesions may lower the recurrence of Nocardia infection with poor drug treatment effects.

Insights into the Diffusion Behaviors of Water over Hydrophilic/Hydrophobic Catalysts During the Conversion of Syngas to High-Quality Gasoline.

Although considerable efforts towards directly converting syngas to liquid fuels through Fischer-Tropsch synthesis have been made, developing catalysts with low CO2 selectivity for the synthesis of high-quality gasoline remains a big challenge. Herein, we designed a bifunctional catalyst composed of hydrophobic FeNa@Si-c and HZSM-5 zeolite, which exhibited a low CO2 selectivity of 14.3 % at 49.8 % CO conversion, with a high selectivity of 62.5 % for gasoline in total products. Molecular dynamic simulations and model experiments revealed that the diffusion of water molecules through hydrophilic catalyst was bidirectional, while the diffusion through hydrophobic catalyst was unidirectional, which were crucial to tune the water-gas shift reaction and control CO2 formation. This work provides a new fundamental understanding about the function of hydrophobic modification of catalysts in syngas conversion.

Use of plant growth regulators to reduce 2-methyl-4-chlorophenoxy acetic acid-Na (MPCA-Na) damage in cotton (Gossypium hirsutum).

BACKGROUND: 2-methyl-4-chlorophenoxy acetic acid-Na (MPCA-Na) is a phenoxy carboxylic acid selective hormone herbicide that is widely used in the crop fields. However, drift of MPCA-Na during application is highly damaging to cotton (Gossypium hirsutum) and other crop plants. This study was carried out from 2019 to 2020 to determine the effects of different concentrations of MPCA-Na on physiological and metabolic activities besides growth and yield of cotton plants at seedling, budding, flowering and boll stages. Moreover, we evaluated the different combinations of 24-epibrassinolide, gibberellin (GA3), phthalanilic acid and seaweed fertilizer to ameliorate herbicide damage. RESULTS: 2-methyl-4-chlorophenoxy acetic acid-Na (MPCA-Na) exposure caused a decrease in the chlorophyll content, and an increase in the soluble protein content, Malondialdehyde (MDA) content and protective enzyme activity. It also caused significant reductions in plant height, boll number and the single boll weight at the seedling and budding stages, but had little effects on plant height and the single boll weight at flowering and boll stage. Under the maximum recommended dose of MPCA-Na (130 g/L), the number of cotton bolls at seedling and budding stages decreased by 75.33 and 79.50%, respectively, and the single boll weight decreased by 46.42 and 36.31%, respectively. Nevertheless, the number of G. hirsutum bolls and single boll weight at flowering and boll stage decreased by 48.15 and 5.38%, respectively. Application of plant growth regulators decreased the MDA content, and increased chlorophyll, soluble protein content and protective enzyme activity, and alleviated MCPA-Na toxicity. Positive effects in case of growth regulators treated plants were also observed in terms of G. hirsutum yield. Phthalanilic acid + seaweed fertilizer, 24-epibrassinolide + seaweed fertilizer, and GA3 + seaweed fertilizer should be used at the seedling, budding, and flowering and boll stages, respectively. CONCLUSIONS: The results of current study suggest that certain plant growth regulators could be used to alleviate MPCA-Na damage and maintain G. hirsutum yield. When the cotton exposed to MCPA-Na at the seedling stage, it should be treated with phthalanilic acid + seaweed fertilizer, while plants exposed at the budding stage should be treated with 24-epibrassinolide + seaweed fertilizer, and those exposed at the flowering and boll stages should be treated with GA3 + seaweed fertilizer to mitigate stress.

The effects of mepiquat chloride (DPC) on the soluble protein content and the activities of protective enzymes in cotton in response to aphid feeding and on the activities of detoxifying enzymes in aphids.

BACKGROUND: Mepiquat chloride (DPC) enhances the resistance of cotton plants, and it is widely used as a growth regulator. DPC can stimulate photosynthesis, stabilize the structure of cotton leaves, and affect population reproduction and energy substances in Aphis gossypii Glover (cotton aphids), but interactions between DPC and cotton aphids remain unclear. In this study, we analyzed the physiological responses of cotton to DPC, and the toxicity of DPC toward cotton aphids, before and after feeding, to explore the DPC-induced defense mechanism against cotton aphids. RESULTS: Measurements of protective enzyme activity in cotton showed that the soluble protein contents, peroxidase (POD) activity, and catalase (CAT) activity in cotton treated with different concentrations of DPC were higher than in the control. Superoxide dismutase (SOD) activity was higher than that of the control when the concentration of DPC was < 0.1 g/L. Under aphid feeding stress, POD activity in cotton treated with a low insect population density was significantly lower than in the controls, but the reverse was true for cotton treated with a high insect population density, and SOD activity was positively correlated with population density. The activities of detoxification enzymes in field and laboratory experiments showed that DPC promoted the specific activity of glutathione S-transferase (GST) in cotton aphids, while the specific activities of carboxylesterase (CarE) and acetylcholinesterase (AchE) were decreased. CONCLUSIONS: DPC enhanced the aphid resistance in cotton by increasing the soluble protein content and the activity of protective enzymes. It also had a toxic effect on cotton aphids by increasing GST activity (the main DPC target). DPC increased the soluble protein content and protective enzymes activity in cotton under aphid stress, and thereby enhanced tolerance to cotton aphids. It conclude that DPC interferes with cotton aphids through indirect (DPC induced cotton defense responses) and direct (DPC toxicity to cotton aphids) ways, which plays a positive role in interfering with cotton aphids.

Identification and expression of potential olfactory-related genes related to Niemann-Pick C2 protein and ionotropic receptors in Haemaphysalis longicornis.

Studies have shown that the main pathway for tick host localization and perception of mating information may be chemosensory. However, chemical communication in ticks is poorly understood, especially in those other than the Ixodes ticks. Niemann-Pick C2 (NPC2) protein and ionotropic receptors (IRs) are considered to be closely related to the perception of infochemicals in arthropods. Through bioinformatic analysis, eight NPC2 and four IR candidate genes were identified through screening and identification of the transcriptome sequencing database of Haemaphysalis longicornis. Phylogenetic tree analysis indicated that H. longicornis possesses similar homology to the genus Ixodes. A comparison of the expression of NPC2 and IR in tick forelegs (first pair of legs), hind legs (fourth pair of legs), and capitula using RT-PCR revealed that, barring HlonNPC2-8, 11 candidate genes were highly expressed in the foreleg and capitulum, which are the main sensory organs of ticks. They were also expressed in the hind legs, except for six genes that were not expressed in the males. RT-qPCR analysis showed upregulation and higher relative expression of HlonNPC2-1, HlonNPC2-3, HlonNPC2-6, and HlonNPC2-8 when stimulated by ammonium hydroxide, whereas the others were downregulated and demonstrated lower relative expression. These results further support the putative role of NPC2s as a new odorant carrier in ticks and present 12 promising candidate genes for understanding tick olfactory communication, enriching the data on these genes, especially outside the genus Ixodes.

Hydrazide Derivatives for Defect Passivation in Pure CsPbI3 Perovskite Solar Cells.

All-inorganic CsPbI3 perovskite presents preeminent chemical stability and a desirable band gap as the front absorber for perovskite/silicon tandem solar cells. Unfortunately, CsPbI3 perovskite solar cells (PSCs) still show low efficiency due to high density of defects in solution-prepared CsPbI3 films. Herein, three kinds of hydrazide derivatives (benzoyl hydrazine (BH), formohydrazide (FH) and benzamide (BA)) are designed to reduce the defect density and stabilize the phase of CsPbI3 . Calculation and characterization results corroborate that the carboxyl and hydrazine groups in BH form strong chemical bonds with Pb2+ ions, resulting in synergetic double coordination. In addition, the hydrazine group in the BH also forms a hydrogen bond with iodine to assist the coordination. Consequently, a high efficiency of 20.47 % is achieved, which is the highest PCE among all pure CsPbI3 -based PSCs reported to date. In addition, an unencapsulated device showed excellent stability in ambient air.

Intelligent Probabilistic System for Digital Tracing Cellular Origin of Individual Clinical Extracellular Vesicles.

Extracellular vesicles (EVs) are small vesicles secreted by various cell types to mediate cell-to-cell communication through the transfer of macromolecules. EVs carry multiple cargo molecules that reflect the origins of their donor cells; thus, they can be considered reliable biomarkers for early cancer diagnosis. However, the diverse cellular origin of EV masks the detection signals generated by both tumor- and nontumor-derived cells. Thereby, the capability to recognize the cellular origin of EVs is the prerequisite for their diagnostic applications. In the present study, we develop an intelligent probabilistic system for tracing the cellular origin of individual EVs using single-molecule multicolor imaging. Through the analysis of the expression profile of two typical membrane protein markers, CD9 and CD63, on single EVs, accurate and rapid probabilistic recognition of EVs derived from individual tumor and nontumor cells in clinical samples is achieved. The correlation between cellular origin and surface protein phenotyping on single EVs is also exemplified. The proposed system holds great potential for advancing EVs as reliable clinical indicators and exploring their biological functions.

Molecular Determination of Organic Adsorption Sites on Smectite during Fe Redox Processes Using ToF-SIMS Analysis.

Turnover of soil organic carbon (SOC) is strongly affected by a balance between mineral protection and microbial degradation. However, the mechanisms controlling the heterogeneous and preferential adsorption of different types of SOC remain elusive. In this work, the heterogeneous adsorption of humic substances (HSs) and microbial carbon (MC) on a clay mineral (nontronite NAu-2) during microbial-mediated Fe redox cycling was determined using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results revealed that HSs pre-adsorbed on NAu-2 would partially inhibit structural modification of NAu-2 by microbial Fe(III) reduction, thus retarding the subsequent adsorption of MC. In contrast, NAu-2 without precoated HSs adsorbed a significant amount of MC from microbial polysaccharides as a result of Fe(III) reduction. This was attributed to the deposition of a thin Al-rich layer on the clay surface, which provided active sites for MC adsorption. This study provides direct and detailed molecular evidence for the first time to explain the preferential adsorption of MC over HSs on the surface of clay minerals in iron redox processes, which could be critical for the preservation of MC in soil. The results also indicate that ToF-SIMS is a unique tool for understanding complex organic-mineral-microbe interactions.

Single-Molecular Catalysis Identifying Activation Energy of the Intermediate Product and Rate-Limiting Step in Plasmonic Photocatalysis.

Plasmon-mediated photocatalysis provides a novel strategy for harvesting solar energy. Identification of the rate-determining step and its activation energy in plasmon-mediated photocatalysis plays critical roles for understanding the contribution of hot carriers, which facilitates rational designation of catalysts with integrated high photochemical conversion efficiency and catalytic performance. However, it remains a challenge due to a lack of research tools with spatiotemporal resolution that are capable of capturing intermediates. In this work, we used a single-molecule fluorescence approach to investigate a localized surface plasmon resonance (LSPR)-enhanced photocatalytic reaction with subturnover resolution. By introducing variable temperature as an independent parameter in plasmonic photocatalysis, the activation energies of tandem reaction steps, including intermediate generation, product generation, and product desorption, were clearly differentiated, and intermediate generation was found to be the rate-limiting step. Remarkably, the cause of the plasmon-enhanced catalysis performance was found to be its ability of lowering the activation energy of intermediate generation. This study gives new insight into the photochemical energy conversion pathways in plasmon-enhanced photocatalysis and sheds light on designing high-performance plasmonic catalysts.

Pore Confined Liquid-Vacuum Interface for Charge Transfer Study in an Electrochemical Process.

A pore confined liquid-vacuum interface was created in liquid secondary ion mass spectrometry analysis in order to study the charge transfer in electrochemical reactions. The interfacial processes such as the critical diameter, influence of aperture properties on the morphology of the liquid-vacuum interface, pressure field, concentration field, and electric field were revealed by finite element simulation. The correlation between numerical study of the chemical changes at the electrode-electrolyte interface and experimental results during the dynamic potential scan was built successfully. Better understanding of these interfacial processes could promote further applications of liquid secondary ion mass spectrometry in energy storage and electrochemical catalysis.

I2/DMSO-mediated multicomponent reaction of o-hydroxyaryl methyl ketones, rongalite, and DMSO: access to C3-sulfenylated chromones.

An efficient I2-DMSO reagent system-mediated multicomponent reaction strategy for the synthesis of C3-sulfenylated chromones from o-hydroxyaryl methyl ketones, rongalite, and dimethyl sulfoxide has been developed. Notably, the double C-S bond cleavages of rongalite and dimethyl sulfoxide served as key steps in this smooth transformation, affording the C1 unit and sulfur source for the assembly of C3-sulfenylated chromones. Preliminary mechanistic studies indicated that in situ generated HCHO and (2-(2-hydroxyphenyl)-2-oxoethyl)dimethylsulfonium iodine were probably the key intermediates in this transformation.

Investigation of Ion-Solvent Interactions in Nonaqueous Electrolytes Using in Situ Liquid SIMS.

Ion-solvent interactions in nonaqueous electrolytes are of fundamental interest and practical importance, yet debates regarding ion preferential solvation and coordination numbers persist. In this work, in situ liquid SIMS was used to examine ion-solvent interactions in three representative electrolytes, i.e., lithium hexafluorophosphate (LiPF6) at 1.0 M in ethylene carbonate (EC)-dimethyl carbonate (DMC) and lithium bis(fluorosulfonyl)imide (LiFSI) at both low (1.0 M) and high (4.0 M) concentrations in 1,2-dimethoxyethane (DME). In the positive ion mode, solid molecular evidence strongly supports the preferential solvation of Li+ by EC. Besides, from the negative spectra, we also found that PF6- forms association with EC, which has been neglected by previous studies due to the relatively weak interaction. In both LiFSI in DME electrolytes, however, no evidence shows that FSI- is associated with DME. Furthermore, strong salt ion cluster signals were observed in the 1.0 M LiPF6 in EC-DMC electrolyte, suggesting that a significant amount of Li+ ions stay in the vicinity of anions. In sharp comparison, weak ion cluster signals were detected in dilute LiFSI in DME electrolyte, suggesting most ions are well separated, in agreement with our molecular dynamics simulation results. These findings indicate that with virtues of little bias on detecting positive and negative ions and the capability of directly analyzing concentrated electrolytes, in situ liquid SIMS is a powerful tool that can provide key evidence for improved understanding on the ion-solvent interactions in nonaqueous electrolytes. Therefore, we anticipate wide applications of in situ liquid SIMS on investigations of various ion-solvent interactions in the near future.

An investigation of the beam damage effect on in situ liquid secondary ion mass spectrometry analysis.

RATIONALE: During in situ liquid secondary ion mass spectrometry (SIMS) analysis, the primary ion beam is normally scanned on a very small area to collect signals with high ion doses (1014 to 1016 ions/cm2 ). As a result, beam damage may become a concern when compared with the static limit of SIMS analysis, in which the dose is normally less than 1012 ions/cm2 . Therefore, a comparison of ion yields in in situ liquid SIMS analysis versus traditional static SIMS analysis of corresponding dry samples is of great interest. METHODS: In this study, a dipalmitoylphosphatidylcholine (DPPC) liposome solution was used as a model system. Both liquid sample and dry sample were examined. Secondary ion yields using three primary ion species (Bi+ , Bi3+ and Bi3++ ) with various beam currents were investigated. RESULTS: Usable ion yields for both positive and negative characteristic signals (including molecular ions and characteristic fragment ions) were achievable based on optimized experimental conditions for in situ liquid SIMS analysis. The ion yield of the key DPPC molecular ion was comparable to that of traditional static SIMS, and unexpected low fragmentation was observed. The flexible structure of the liquid plays an important role for these observations. CONCLUSIONS: Therefore, beam damage may not be a concern in in situ liquid SIMS analysis if proper experimental conditions are used.

Modeling and Assessment of GPS/BDS Combined Precise Point Positioning.

Precise Point Positioning (PPP) technique enables stand-alone receivers to obtain cm-level positioning accuracy. Observations from multi-GNSS systems can augment users with improved positioning accuracy, reliability and availability. In this paper, we present and evaluate the GPS/BDS combined PPP models, including the traditional model and a simplified model, where the inter-system bias (ISB) is treated in different way. To evaluate the performance of combined GPS/BDS PPP, kinematic and static PPP positions are compared to the IGS daily estimates, where 1 month GPS/BDS data of 11 IGS Multi-GNSS Experiment (MGEX) stations are used. The results indicate apparent improvement of GPS/BDS combined PPP solutions in both static and kinematic cases, where much smaller standard deviations are presented in the magnitude distribution of coordinates RMS statistics. Comparisons between the traditional and simplified combined PPP models show no difference in coordinate estimations, and the inter system biases between the GPS/BDS system are assimilated into receiver clock, ambiguities and pseudo-range residuals accordingly.

One-pot total synthesis of streptindole, arsindoline B and their congeners through tandem decarboxylative deaminative dual-coupling reaction of amino acids with indoles.

This paper described a decarboxylative deaminative dual-coupling reaction of amino acids with indoles to afford BIM scaffolds and its further application to the one-pot total synthesis of natural products. This method featured a stimulating example of activating amino acids in one pot as multi-carbon building blocks for transformation into final targets which are equipped with amino acid side chain backbones.

Analysis of dynamic behavior of multiple-stage planetary gear train used in wind driven generator.

A dynamic model of multiple-stage planetary gear train composed of a two-stage planetary gear train and a one-stage parallel axis gear is proposed to be used in wind driven generator to analyze the influence of revolution speed and mesh error on dynamic load sharing characteristic based on the lumped parameter theory. Dynamic equation of the model is solved using numerical method to analyze the uniform load distribution of the system. It is shown that the load sharing property of the system is significantly affected by mesh error and rotational speed; load sharing coefficient and change rate of internal and external meshing of the system are of obvious difference from each other. The study provides useful theoretical guideline for the design of the multiple-stage planetary gear train of wind driven generator.