Paraventricular Thalamus Dynamically Modulates Aversive Memory via Tuning Prefrontal Inhibitory Circuitry.

The impact of stress on the formation and expression of memory is well studied, especially on the contributions of stress hormones. But how stress affects brain circuitry dynamically to modulate memory is far less understood. Here, we used male C57BL6/J mice in an auditory fear conditioning as a model system to examine this question and focused on the impact of stress on dorsomedial prefrontal cortex (dmPFC) neurons which play an important role in probabilistic fear memory. We found that paraventricular thalamus (PVT) neurons are robustly activated by acute restraining stress. Elevated PVT activity during probabilistic fear memory expression increases spiking in the dmPFC somatostatin neurons which in turn suppresses spiking of dmPFC parvalbumin (PV) neurons, and reverts the usual low fear responses associated with probabilistic fear memory to high fear. This dynamic and reversible modulation allows the original memory to be preserved and modulated during memory expression. In contrast, elevated PVT activity during fear conditioning impairs synaptic modifications in the dmPFC PV-neurons and abolishes the formation of probabilistic fear memory. Thus, PVT functions as a stress sensor to modulate the formation and expression of aversive memory by tuning inhibitory functions in the prefrontal circuitry.SIGNIFICANCE STATEMENT The impact of stress on cognitive functions, such as memory and executive functions, are well documented especially on the impact by stress hormone. However, the contributions of brain circuitry are far less understood. Here, we show that a circuitry-based mechanism can dynamically modulate memory formation and expression, namely, higher stress-induced activity in paraventricular thalamus (PVT) impairs the formation and expression of probabilistic fear memory by elevating the activity of somatostatin-neurons to suppress spiking in dorsomedial prefrontal parvalbumin (PV) neurons. This stress impact on memory via dynamic tuning of prefrontal inhibition preserves the formed memory but enables a dynamic expression of memory. These findings have implications for better stress coping strategies as well as treatment options including better drug targets/mechanisms.

Surface Biofunctionalization of Gadolinium Phosphate Nanobunches for Boosting Osteogenesis/Chondrogenesis Differentiation.

In order to achieve smart biomedical micro/nanomaterials, promote interaction with biomolecules, improve osteogenic/chondrogenic differentiation, exhibit better dispersion in bone implants and ultimately maximize functionality, we innovatively and successfully designed and synthesized polymer PBLG-modified GdPO4·H2O nanobunches by hydroxylation, silylation and glutamylation processes. The effects of different feeding ratios on the surface coating of GdPO4·H2O with Si-OH, the grafting γ-aminopropyltriethoxysilane (APS) and the in situ ring-opening polymerization reaction of poly(g-benzyl-L-glutamate) (PBLG) were investigated, and the physical and chemical properties were characterized in detail. When GdPO4·H2O@SiO2-APS:NCA = 4:1, the PBLG-g-GdPO4·H2O grafting rate was 5.93%, with good stability and dispersion in degradable polymeric materials. However, the MRI imaging signal was sequentially weakened as the modification process proceeded. Despite this, the biological effects had surprising findings. All the modifiers at appropriate concentrations were biocompatible and biologically active and the biomacromolecules of COL I and COL II in particular were expressed at least 3 times higher in GdPO4·H2O@SiO2 compared to the PLGA. This indicates that the appropriate surface modification and functionalization of gadolinium-containing micro/nanomaterials can promote interaction with cells and encourage bone regeneration by regulating biomacromolecules and can be used in the field of biomedical materials.

Elevated activity in the dorsal dentate gyrus reduces expression of fear memory after fear extinction training.

Background: Effectively reducing the expression of certain aversive memories (fear or trauma memories) with extinction training is generally viewed to be therapeutically important. A deeper understanding of the biological basis for a more effective extinction process is also of high scientific importance. Methods: Our study involved intraventricular injection or local injection into the dorsal dentate gyrus of anti-neuregulin 1 antibodies (anti-NRG1) before fear extinction training, followed by testing the expression of fear memory 24 hours afterward or 9 days later. We used local injection of chemogenetic or optogenetic viruses into the dorsal dentate gyrus to manipulate the activity of the dorsal dentate gyrus and test the expression of fear memory. We also examined the effect of deep brain stimulation in the dorsal dentate gyrus on the expression of fear memory. Results: Mice that received intraventricular injection with anti-NRG1 antibodies exhibited lower expression of fear memory and increased density of activated excitatory neurons in the dorsal dentate gyrus. Injection of anti-NRG1 antibodies directly into the dorsal dentate gyrus also led to lower expression of fear memory and more activated neurons in the dorsal dentate gyrus. Inhibiting the activity of dorsal dentate gyrus excitatory neurons using an inhibitory designer receptor exclusively activated by designer drugs (DREADD) eliminated the effects of the anti-NRG1 antibodies. Enhancing the activity of the dorsal dentate gyrus with an excitatory DREADD or optogenetic stimulation resulted in lower expression of fear memory in mice that did not receive infusion of anti-NRG1 antibodies. Deep brain stimulation in the dorsal dentate gyrus effectively suppressed expression of fear memory, both during and after fear extinction training. Limitations: The mechanism for the contribution of the dorsal dentate gyrus to the expression of fear memory needs further exploration. Conclusion: Activation of the dorsal dentate gyrus may play an important role in modulating the expression of fear memory; its potential use in fear memory extinction is worthy of further exploration.

Multicomponent gas detection technology of FDM and TDM based on photoacoustic spectroscopy.

In this paper, a multicomponent gas detection system based on photoacoustic spectroscopy (PAS) is proposed with a combination of frequency division multiplexing (FDM) and time division multiplexing (TDM), combining a resonance photoacoustic cell and broadband microphone. A PAS gas cell with a wide frequency response bandwidth was used to achieve the FDM by selecting a specific modulation frequency of each component gas. The sawtooth wave driver current of each laser was output at a constant time interval for achieving the TDM. Compared with the laser channel control using a photoswitch, the driver current control was a simpler and more convenient means to implement TDM. The four gas components of methane (CH4), water (H2O) vapor, carbon dioxide (CO2), and acetylene (C2H2) were selected as sample gases for testing the feasibility of the method. The experimental results showed that the gas detection limits of CH4, H2O vapor, CO2, and C2H2 were 75.435, 2.502, 341.960, and 4.284 ppm, respectively. In addition, the linear fittings of gas concentration were 0.99386, 0.99772, 0.98995, and 0.98955, respectively.

3D aluminum/silver hierarchical nanostructure with large areas of dense hot spots for surface-enhanced raman scattering.

Plasmonic nanomaterials possessing large-volume, high-density hot spots with high field enhancement are highly desirable for ultrasensitive surface-enhanced Raman scattering (SERS) sensing. However, many as-prepared plasmonic nanomaterials are limited in available dense hot spots and in sample size, which greatly hinder their wide applications in SERS devices. Here, we develop a two-step physical deposition protocol and successfully fabricate 3D hierarchical nanostructures with highly dense hot spots across a large scale (6 × 6 cm2 ). The nanopatterned aluminum film was first prepared by thermal evaporation process, which can provide 3D quasi-periodic cloud-like nanostructure arrays suitable for noble metal deposition; then a large number of silver nanoparticles with controllable shape and size were decorated onto the alumina layer surfaces by laser molecular beam epitaxy, which can realize large-area accessible dense hot spots. The optimized 3D-structured SERS substrate exhibits high-quality detection performance with excellent reproducibility (13.1 and 17.1%), whose LOD of rhodamine 6G molecules was 10-9 M. Furthermore, the as-prepared 3D aluminum/silver SERS substrate was applied in detection of melamine with the concentration down to 10-7 M and direct detection of melamine in infant formula solution with the concentration as low 10 mg/L. Such method to realize large-area hierarchical nanostructures can greatly simplify the fabrication procedure for 3D SERS platforms, and should be of technological significance in mass production of SERS-based sensors.

The impact of D-cycloserine and sarcosine on in vivo frontal neural activity in a schizophrenia-like model.

BACKGROUND: N-methyl-D-aspartate receptor (NMDAR) hypofunction has been proposed to underlie the pathogenesis of schizophrenia. Specifically, reduced function of NMDARs leads to altered balance between excitation and inhibition which further drives neural network malfunctions. Clinical studies suggested that NMDAR modulators (glycine, D-serine, D-cycloserine and glycine transporter inhibitors) may be beneficial in treating schizophrenia patients. Preclinical evidence also suggested that these NMDAR modulators may enhance synaptic NMDAR function and synaptic plasticity in brain slices. However, an important issue that has not been addressed is whether these NMDAR modulators modulate neural activity/spiking in vivo. METHODS: By using in vivo calcium imaging and single unit recording, we tested the effect of D-cycloserine, sarcosine (glycine transporter 1 inhibitor) and glycine, on schizophrenia-like model mice. RESULTS: In vivo neural activity is significantly higher in the schizophrenia-like model mice, compared to control mice. D-cycloserine and sarcosine showed no significant effect on neural activity in the schizophrenia-like model mice. Glycine induced a large reduction in movement in home cage and reduced in vivo brain activity in control mice which prevented further analysis of its effect in schizophrenia-like model mice. CONCLUSIONS: We conclude that there is no significant impact of the tested NMDAR modulators on neural spiking in the schizophrenia-like model mice.

Two-component gas quartz-enhanced photoacoustic spectroscopy sensor based on time-division multiplexing of distributed-feedback laser driver current.

A two-component gas sensor in quartz-enhanced photoacoustic spectroscopy based on time-division multiplexing (TDM) technology of a distributed-feedback (DFB) laser driver current was proposed and experimentally demonstrated. The quartz tuning-fork-based photoacoustic spectroscopy (PAS) cell configuration with two optical collimators and two acoustic microresonators was designed to detect the second-harmonic (${2}f$2f) PAS signal. The two optical collimators guaranteed that the two laser beams would inject the PAS cell conveniently, providing higher power input than a 3 dB optical fiber coupler. Two-component gas sensing was achieved by the TDM of the DFB laser driver current. We used this two-component gas sensing technique to detect acetylene (${{\rm C}_2}{{\rm H}_2}$C2H2) at 1532.83 nm and methane (${{\rm CH}_4}$CH4) at 1653.722 nm. The ${{\rm C}_2}{{\rm H}_2}$C2H2 and ${{\rm CH}_4}$CH4 detection was achieved at a 2.4 s interval. The minimum detection limits of 1 ppmv for ${{\rm C}_2}{{\rm H}_2}$C2H2 and 13.14 ppmv for ${{\rm CH}_4}$CH4 were obtained, and the linear responses reached were 0.99968 and 0.99652 for ${{\rm C}_2}{{\rm H}_2}$C2H2 and ${{\rm CH}_4}$CH4, respectively. Moreover, the continuous monitoring of ${{\rm CH}_4}$CH4 and ${{\rm C}_2}{{\rm H}_2}$C2H2 for 40 min showed a good stability. The TDM technology of the DFB laser driver current would play an important role on the multi-component detection.

Investigation of Electron Momentum Density in Carbon Nanotubes Using Transmission Electron Microscopy.

Valence Compton profiles (CPs) of multiwall (MWCNTs) and single-wall carbon nanotubes (SWCNTs) were obtained by recording electron energy-loss spectra at large momentum transfer in the transmission electron microscope, a technique known as electron Compton scattering from solids (ECOSS). The experimental MWCNT/SWCNT results were compared with that of graphite. Differences between the valence CPs of MWCNTs and SWCNTs were observed, and the SWCNT CPs indicate a greater delocalization of the ground-state charge density compared to graphite. The results clearly demonstrate the feasibility and potential of the ECOSS technique as a complementary tool for studying the electronic structure of materials with nanoscale spatial resolution.

Binding efficiency of recombinant collagen-binding basic fibroblast growth factors (CBD-bFGFs) and their promotion for NIH-3T3 cell proliferation.

The recombinant basic fibroblast growth factor (bFGF) containing collagen-binding domain (CBD) has been found to be a potential therapeutic factor in tissue regeneration. However, its binding efficiency and quantification remain uncertain. In this research, massive recombinant bFGFs with good bioactivity for enhancing the proliferation of NIH-3T3 cells were achieved. An ELISA-based quantitative method was set up to investigate the binding efficiency of CBD-bFGFs on collagen films. It indicated that the CBDs significantly increased the collagen-binding ability of bFGF (P < .05), with the optimum binding condition first determined to be in the pH range of 7.5-9.5 (P < .05). Then, the relevant equations to calculate the binding density of bFGF, C-bFGF, and V-bFGF were acquired. Analysis confirmed that the bioactivity of immobilized bFGFs was well correlated with the density of growth factor on collagen films. Based on this research, the density of growth factor is a logical and applicable dosage unit for quantification of binding efficiency of growth factors, rather than traditional concentration of soluble growth factors in tissue engineering applications.

Dual Path Lock-In System for Elimination of Residual Amplitude Modulation and SNR Enhancement in Photoacoustic Spectroscopy.

A technique for elimination of residual amplitude modulation (ERAM) in photoacoustic spectroscopy based on dual path lock-in was proposed and experimentally demonstrated. There are two lock-in amplifiers, one is for gas concentration demodulation and another for residual amplitude modulation (RAM) measurement by tuning the reference signal in different phases, and then a dual path lock-in technique based on subtraction is applied to RAM removal, improving the second harmonic profile significantly. In this system, the signal to noise ratio (SNR) increases about two times based on our dual path lock-in technique compared to one distributed feedback laser diode (DFB-LD). The system achieved a good linear response (R-square = 0.99887) in a concentration range from 100 ppmv to 2400 ppmv and a minimum detection limit (MDL) of 1.47 ppmv.

Acousto-Optic Q-Switched Fiber Laser-Based Intra-Cavity Photoacoustic Spectroscopy for Trace Gas Detection.

We proposed a new method for gas detection in photoacoustic spectroscopy based on acousto-optic Q-switched fiber laser by merging a transmission PAS cell (resonant frequency f0 = 5.3 kHz) inside the fiber laser cavity. The Q-switching was achieved by an acousto-optic modulator, achieving a peak pulse power of ~679 mW in the case of the acousto-optic modulation signal with an optimized duty ratio of 10%. We used a custom-made fiber Bragg grating with a central wavelength of 1530.37 nm (the absorption peak of C2H2) to select the laser wavelength. The system achieved a linear response (R² = 0.9941) in a concentration range from 400 to 7000 ppmv, and the minimum detection limit compared to that of a conventional intensity modulation system was enhanced by 94.2 times.

Enhanced in Vitro Mineralization and in Vivo Osteogenesis of Composite Scaffolds through Controlled Surface Grafting of L-Lactic Acid Oligomer on Nanohydroxyapatite.

Nanocomposite of hydroxyapatite (HA) surface grafted with L-lactic acid oligomer (LAc oligomer) (op-HA) showed improved interface compatibility, mechanical property, and biocompatibility in our previous study. In this paper, composite scaffolds of op-HA with controlled grafting different amounts of LAc oligomer (1.1, 5.2, and 9.1 wt %) were fabricated and implanted to repair rabbit radius defects. The dispersion of op-HA nanoparticles was more uniform than n-HA in chloroform and nanocomposites scaffold. Calcium and phosphorus exposure, in vitro biomineralization ability, and cell proliferation were much higher in the op-HA1.1 wt %/PLGA scaffolds than the other groups. The osteodifferentiation and bone fusion in animal tests were significantly enhanced for op-HA5.2 wt %/PLGA scaffolds. The results indicated that the grafted LAc oligomer of 5.2 or 9.1 wt %, which formed a barrier layer on the HA surface, prevented the exposure of nucleation sites. The shielded nucleation sites of op-HA particles (5.2 wt %) might be easily exposed as the grafted LAc oligomer was decomposed easily by enzyme systems in vivo. Findings from this study have revealed that grafting 1.1 wt % amount of LAc oligomer on hydroxyapatite could improve in vitro mineralization, and 5.2 wt % could promote in vivo osteogenesis capacity of composite scaffolds.

Demodulation algorithm used in single-beam system immune to light power drift.

A demodulation algorithm based on the head-tail technique is proposed for single-beam water vapor detection under rough environmental conditions, which is immune to fluctuations of light power. In the head-tail technique, collected data are processed by adding the head and tail data together and gradually approaching the center. The majority of photocurrent attenuation caused by optical loss can be effectively compensated by combining an optical intensity normalization coefficient in the method. The experiment indicates that, when the light power attenuates 4%, the deviation in a single-beam system is 1.29%, which is obviously superior to a dual-beam subtraction system whose deviation is 8.45%. The connection and advantages compared to a previous single-beam detection system have been discussed. The whole arrangement is simply designed without a beam splitter, of which the reliability and validity are fully verified by the experimental results.

Modulation of learning safety signals by acute stress: paraventricular thalamus and prefrontal inhibition.

Distinguishing between cues predicting safety and danger is crucial for survival. Impaired learning of safety cues is a central characteristic of anxiety-related disorders. Despite recent advances in dissecting the neural circuitry underlying the formation and extinction of conditioned fear, the neuronal basis mediating safety learning remains elusive. Here, we showed that safety learning reduces the responses of paraventricular thalamus (PVT) neurons to safety cues, while activation of these neurons controls both the formation and expression of safety memory. Additionally, the PVT preferentially activates prefrontal cortex somatostatin interneurons (SOM-INs), which subsequently inhibit parvalbumin interneurons (PV-INs) to modulate safety memory. Importantly, we demonstrate that acute stress impairs the expression of safety learning, and this impairment can be mitigated when the PVT is inhibited, indicating PVT mediates the stress effect. Altogether, our findings provide insights into the mechanism by which acute stress modulates safety learning.

Carbene-mediated gelatin and hyaluronic acid hydrogel paints with ultra adhesive ability for arthroscopic cartilage repair.

In articular cartilage defect, particularly in arthroscopy, regenerative hydrogels are urgently needed. It should be able to firmly adhere to the cartilage tissue and maintain sufficient mechanical strength to withstand approximately 10 kPa of arthroscopic hydraulic flushing. In this study, we report a carbene-mediated ultra adhesive hybrid hydrogel paints for arthroscopic cartilage repair, which combined the photo initiation of double crosslinking system with the addition of diatomite, as a further reinforcing agent and biological inorganic substances. The double network consisting of ultraviolet initiated polymerization of hyaluronic acid methacrylate (HAMA) and carbene insertion chemistry of diazirine-grafted gelatin (GelDA) formed an ultra-strong adhesive hydrogel paint (H2G5DE). Diatomite helped the H2G5DE hydrogel paint firmly adhere to the cartilage defect, withstanding nearly 100 kPa of hydraulic pressure, almost 10 times that in clinical arthroscopy. Furthermore, the H2G5DE hydrogel supported cell growth, proliferation, and migration, thus successfully repairing cartilage defects. Overall, this study demonstrates a proof-of-concept of ultra-adhesive polysaccharide hydrogel paints, which can firmly adhere to the articular cartilage defects, can resist continuous hydraulic pressure, can promote effective cartilage regeneration, and is very suitable for minimally invasive arthroscopy.

High-sensitive measurement of water vapor: shot-noise level performance via a noise canceller.

Taking advantages of distributed feedback laser diode a technique is described to achieve high-sensitive measurement for water vapor concentration. This technique, with a modified balanced ratio metric detection system, has improved the accuracy of measured absorption spectrum by two main aspects. Improvement by matching equivalent conductivity of signal or reference photo detector (PD) is presented, and with the additional matched resistance suppression for the power variation in the signal-beam has been improved from 53 to 88 dB. The importance of integrating amplifier bandwidth design from the circuit to the measured absorption spectrum has been demonstrated in our experiment. For a scan rate of 32 Hz with an optimal corresponding bandwidth of 15.9 kHz, the absorption spectrum is well described by Voigt profile, with a difference of 1% at an atmosphere pressure of 1 atm and a room temperature of 296 K. With the application of averaging and filtering, absorption sensitivity of 1.093×10(-6) for water vapor at 1368.597 nm has been demonstrated, and the corresponding concentration is 71.8 ppb in just a 10 cm path length.

Research progress of biomaterials and innovative technologies in urinary tissue engineering.

Substantial interests have been attracted to multiple bioactive and biomimetic biomaterials in recent decades because of their ability in presenting a structural and functional reconstruction of urinary tissues. Some innovative technologies have also been surging in urinary tissue engineering and urological regeneration by providing insights into the physiological behavior of the urinary system. As such, the hierarchical structure and tissue function of the bladder, urethra, and ureter can be reproduced similarly to the native urinary tissues. This review aims to summarize recent advances in functional biomaterials and biomimetic technologies toward urological reconstruction. Various nanofirous biomaterials derived from decellularized natural tissues, synthetic biopolymers, and hybrid scaffolds were developed with desired microstructure, surface chemistry, and mechanical properties. Some growth factors, drugs, as well as inorganic nanomaterials were also utilized to enhance the biological activity and functionality of scaffolds. Notably, it is emphasized that advanced approaches, such as 3D (bio) printing and organoids, have also been developed to facilitate structural and functional regeneration of the urological system. So in this review, we discussed the fabrication strategies, physiochemical properties, and biofunctional modification of regenerative biomaterials and their potential clinical application of fast-evolving technologies. In addition, future prospective and commercial products are further proposed and discussed.

Influence of foot excitation and shin posture on the vibration behavior of the entire spine inside a seated human body.

Due to ethical issues and simplification of traditional biomechanical models, experimental methods and traditional computer methods were difficult to quantify the effects of foot excitation and shin posture on vibration behavior of the entire spine inside a seated human body under vertical whole-body vibration. This study developed and verified different three-dimensional (3D) finite element (FE) models of seated human body with detailed anatomical structure under the biomechanical characteristics to predict vibration behavior of the entire spine inside a seated human body with different foot excitation (with and without vibration) and shin posture (vertical and tilt posture). Random response analysis was performed to study the transmissibility of the entire spine to seat under vertical white noise excitation between 0 and 20 Hz at 0.5 m/s2 r.m.s. The results showed that although the foot excitation could reduce the fore-aft transmissibility in the cervical spine (23% reduction), it could significantly increase that in the lumbar spine (52% increase), which resulted in complex alternating stresses at lumbar spine and made the lumbar spine more vulnerable to injury in long-term vibration environment. Moreover, the shin tilt posture made the maximum fore-aft transmissibility in the lumbar spine move to the upper lumbar spine. The study provided new insights into the influence of foot excitation and shin posture on the vibration behavior of the entire spine inside a seated human body. Foot excitation exposed the lumbar spine to complex alternating stresses and made it more vulnerable to injury in long-term whole body vibration.

Magnetic nanocomposites for magneto-promoted osteogenesis: from simulation auxiliary design to experimental validation.

Magnetically actuated mechanical stimulation, as a novel form of intelligent responsive force stimulation, has a great potential for remote spatiotemporal regulation of a variety of life processes. Hence, the optimal design of magnetic nanomaterials for generating magneto-mechanical stimuli becomes an important driving force in the development of magneto-controlled biotherapy. This study aims to clarify the general rule that the surface modification amount of magnetic nanoparticles (NPs) affects the biological behavior (e.g., cell adhesion, proliferation and differentiation) of pre-osteoblast cells. First of all, course-grained molecular dynamics simulations predict that 23.3% graft modification of the NPs can maximize the heterogeneity of the dynamics of the polymer matrix, which may generate enhanced mechanical stimuli. Then, experimentally, iron oxide (IO) NPs grafted with different amounts of poly(γ-benzyl-L-glutamate) (PBLG) were prepared to obtain homogeneous magnetic nanocomposites with improved mechanical properties. Further in vitro cell experiments demonstrate that the grafting amounts of 21.46% and 32.34% of PBLG on IO NPs are the most beneficial for the adhesion and osteogenic differentiation of cells. Simultaneously, the maximized upregulation of the Piezo1 gene indicates that the cells receive the strongest magneto-mechanical stimuli. The consistent conclusion of the experiments and simulations indicates that 20-30% PBLG grafted on the IO surface could maximize the ability of magnetic stimuli to regulate the biological behavior of the cells, which validates the feasibility of simulation auxiliary material design and is of great importance for promoting the application of magneto-controlled biotherapy in bioengineering and biomedicine.

PRP coating on different modified surfaces promoting the osteointegration of polyetheretherketone implant.

Introduction: Polyetheretherketone (PEEK) material implants have been applied more and more clinically recently. In order to increase the osteogenic activity of PEEK material, the microstructure change of the material surface and the construction of functional microcoatings have become a hot research topic. This study investigated the ability of PEEK surfaces modified by different methods to carry Platelet-rich plasma (PRP) and the osteogenic ability of different PEEK microstructures after carrying PRP in vivo/in vitro. Methods: In this study, PEEK surfaces were modified by sulfuric acid, gaseous sulfur trioxide and sandpaper. Next, PRP from SD rats was prepared and incubated on PEEK material with different surface microstructures. Lactate dehydrogenase test, scanning electron microscope and Elisa assay was used to evaluate adhesion efficiency of PRP. Then in vitro tests such as CCK-8, ALP staining, ARS staining and RT-qPCR et al were used to further evaluate osteogenesis ability of the PRP coating on PEEK surface. Finally, The tibia defects of SD rats were established, and the new bone was evaluated by Micro-CT, HE staining, and immunofluorescence staining. Results: The sandpaper-polished PEEK with the strongest PRP carrying capacity showed the best osteogenesis. Our study found that the modified PEEK surface with PRP coating has excellent osteogenic ability and provided the basis for the interface selection of PRP for the further application of PEEK materials. Discussion: Among the three PEEK modified surfaces, due to the most PRP carrying and the strongest osteogenic ability in vitro/vivo, the frosted surface was considered to be the most suitable surface for the preparation of PRP coating.