Single Crystal Seed Induced Epitaxial Growth Stabilizes α-FAPbI3 in Perovskite Solar Cells.

FAPbI3 stands out as an ideal candidate for the photoabsorbing layer of perovskite solar cells (PSCs), showcasing outstanding photovoltaic properties. Nonetheless, stabilizing photoactive α-FAPbI3 remains a challenge due to the lower formation energy of the competitive photoinactive δ-phase. In this study, we employ tetraethylphosphonium lead tribromide (TEPPbBr3) single crystals as templates for the epitaxial growth of PbI2. The strategic use of TEPPbBr3 optimizes the evolution of intermediates and the crystallization kinetics of perovskites, leading to high-quality and phase-stable α-FAPbI3 films. The TEPPbBr3-modified perovskite exhibits optimized carrier dynamics, yielding a champion efficiency of 25.13% with a small voltage loss of 0.34 V. Furthermore, the target device maintains 90% of its initial PCE under maximum power point (MPP) tracking over 1000 h. This work establishes a promising pathway through single crystal seed based epitaxial growth for achieving satisfactory crystallization regulation and phase stabilization of α-FAPbI3 perovskites toward high-efficiency and stable PSCs.

Stereoisomeric Non-Fullerene Acceptors-Based Organic Solar Cells.

Chiral alkyl chains are ubiquitously observed in organic semiconductor materials and can regulate solution processability and active layer morphology, but the effect of stereoisomers on photovoltaic performance has rarely been investigated. For the racemic Y-type acceptors widely used in organic solar cells, it remains unknown if the individual chiral molecules separate into the conglomerate phase or if racemic phase prevails. Here, the photovoltaic performance of enantiomerically pure Y6 derivatives, (S,S)/(R,R)-BTP-4F, and their chiral mixtures are compared. It is found that (S,S) and (R,R)-BTP-4F molecule in the racemic mixtures tends to interact with its enantiomer. The racemic mixtures enable efficient light harvesting, fast hole transfer, and long polaron lifetime, which is conducive to charge generation and suppresses the recombination losses. Moreover, abundant charge diffusion pathways provided by the racemate contribute to efficient charge transport. As a result, the racemate system maximizes the power output and minimizes losses, leading to a higher efficiency of 18.16% and a reduced energy loss of 0.549 eV, as compared to the enantiomerically pure molecules. This study demonstrates that the chirality of non-fullerene acceptors should receive more attention and be designed rationally to enhance the efficiency of organic solar cells.

A High-Mobility n-Type Noncovalently-Fused-Ring Polymer for High-Performance Organic Thermoelectrics.

Conjugated polymers are emerging as competitive candidates for organic thermoelectrics (OTEs). However, to make the device truly pervasive, both p- and n-type conjugated polymers are essential. Despite great efforts, no n-type equivalents to the p-type benchmark PEDOT:PSS exist to date mainly due to the low electrical conductivity (σ). Herein, a near-amorphous n-type conjugated polymer, namely pDFSe, is reported with high σ by achieving the synergy between charge transport and doping efficiency. The polymer pDFSe is synthesized based on an acceptor-triad moiety of diketopyrrolopyrrole-difluorobenzoselenadiazole-diketopyrrolopyrrole (DFSe), which has the noncovalently-fused-ring structure to reinforce the backbone rigidity. Furthermore, an axisymmetric thiophene-selenophene-thiophene donor is introduced, which enables the formation of near-amorphous microstructures. The above merits ensure good doping efficiency without scarifying efficient intrachain charge-carrier transport. Thus, pDFSe-based n-type transistors exhibit high electron mobility up to 6.15 cm2 V-1 s-1, much higher than its reference polymer pDSe without the noncovalently-fused-ring structure (0.77 cm2 V-1 s-1). Further upon n-doping, pDFSe demonstrates excellent σ of 62.6 S cm-1 and maximum power factor of 133.1 µW m-1 K-2, which are among the highest values reported for solution-processed n-type polymers. The results demonstrate the great potential of near-amorphous n-type conjugated polymers with noncovalently-fused-ring structure for the next-generation OTEs.

Bis(benzoselenadiazol)ethane: A π-Extended Acceptor-Dimeric Unit for Ambipolar Polymer Transistors with Hole and Electron Mobilities Exceeding 10†cm2 V-1 s-1.

The lack of ambipolar polymers with balanced hole (µh) and electron mobilities (µe) >10 cm2 V-1 s-1 is the main bottleneck for developing organic integrated circuits. Herein, we show the design and synthesis of a π-extended selenium-containing acceptor-dimeric unit, namely benzo[c][1,2,5]selenadiazol-4-yl)ethane (BBSeE), to address this dilemma. In comparison to its sulfur-counterpart, BBSeE demonstrates enlarged co-planarity, selective noncovalent interactions, polarized Se-N bond, and higher electron affinity. The successful stannylation of BBSeE offers a great opportunity to access acceptor-acceptor copolymer pN-BBSeE, which shows a narrower band gap, lower-lying lowest unoccupied molecular orbital level (-4.05 eV), and a higher degree of backbone planarity. Consequently, the pN-BBSeE-based organic transistors display an ideally balanced ambipolar transporting property with µh and µe of 10.65 and 10.72 cm2 V-1 s-1, respectively. To the best of our knowledge, the simultaneous µh/µe values >10.0 cm2 V-1 s-1 are the best performances ever reported for ambipolar polymers. In addition, pN-BBSeE shows an excellent shelf-storage stability, retaining over 85 % of the initial mobility values after two months storage. Our study demonstrates the π-extended acceptor-dimeric BBSeE is a promising acceptor building block for constructing high-performance ambipolar polymers applied in next-generation organic integrated circuit.

Tailoring the Position of Ester Group on N-Alkyl Chains of Benzotriazole-based Small Molecule Acceptors for High-Performance Organic Solar Cells.

Side chain engineering plays a vital role in exploring high-performance small molecule acceptors (SMAs) for organic solar cells (OSCs). In this work, we designed and synthesized a series of A-DA'D-A type SMAs by introducing different N-substituted alkyl and ester alkyl side chains on benzotriazole (BZ) central unit and aimed to investigate the effect of different ester substitution positions on photovoltaic performances. All the new SMAs with ester groups exhibit lower the lowest unoccupied molecular orbital (LUMO) energy levels and more blue-shifted absorption, but relatively higher absorption coefficients than alkyl chain counterpart. After blending with the donor PM6, the ester side chain-based devices demonstrate enhanced charge mobility, reduced amorphous intermixing domain size and long-lived charge transfer state compared to the alkyl chain counterpart, which are beneficial to achieve higher short-circuit current density (Jsc ) and fill factor (FF), simultaneously. Thereinto, the PM6 : BZ-E31 based device achieves a higher power conversion efficiency (PCE) of 18.33 %, which is the highest PCE among the OSCs based on the SMAs with BZ-core. Our work demonstrated the strategy of ester substituted side chain is a feasible and effective approach to develop more efficient SMAs for OSCs.

Precisely Manipulating Molecular Packing via Tuning Alkyl Side-Chain Topology Enabling High-Performance Nonfused-Ring Electron Acceptors.

In the development of high-performance organic solar cells (OSCs), the self-organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side-chain topology in a series of low-cost nonfused-ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA-4, which possesses an asymmetric alkyl side-chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA-4. As a result, the OSC device based on DPA-4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA-based OSCs.

Polaritons in a Polycrystalline Layer of Non-fullerene Acceptor.

Non-fullerene acceptor molecules developed for organic solar cells feature a very intense absorption band in the near-infrared. In the solid phase, the strong interaction between light and the transition dipole moment for molecular excitation should induce formation of polaritons. The reflection spectra for polycrystalline films of a non-fullerene acceptor with a thienothienopyrrolo-thienothienoindole core of the so-called Y6 type indeed show a signature of polaritons. A local minimum in the middle of the reflection band is associated with the allowed molecular transition. The minimum in reflection allows efficient entry of light into the solid, resulting in a local maximum in external quantum efficiency of a photovoltaic cell made of the pure acceptor.

A Wide Bandgap Acceptor with Large Dielectric Constant and High Electrostatic Potential Values for Efficient Organic Photovoltaic Cells.

Low-bandgap materials have achieved rapid development and promoted the enhancement of power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells. However, the design of wide-bandgap non-fullerene acceptors (WBG-NFAs), required by indoor applications and tandem cells, has been lagging far behind the development of OPV technologies. Here, we designed and synthesized two NFAs named ITCC-Cl and TIDC-Cl by finely optimizing ITCC. In contrast with ITCC and ITCC-Cl, TIDC-Cl can maintain a wider bandgap and a higher electrostatic potential simultaneously. When blending with the donor PB2, the highest dielectric constant is also obtained in TIDC-Cl-based films, enabling efficient charge generation. Therefore, the PB2:TIDC-Cl-based cell possessed a high PCE of 13.8% with an excellent fill factor (FF) of 78.2% under the air mass 1.5G (AM 1.5G) condition. Furthermore, an exciting PCE of 27.1% can be accomplished in the PB2:TIDC-Cl system under the illumination of 500 lux (2700 K light-emitting diode). Combined with the theoretical simulation, the tandem OPV cell based on TIDC-Cl was fabricated and exhibited an excellent PCE of 20.0%.

Small Molecule Donors Design Rules for Non-Halogen Solvent Fabricated Organic Solar Cells.

Compared with all-small-molecule (ASM) and other types of organic solar cells (OSCs), the small molecule donor:polymer acceptor (SMD:PA) OSCs develop much slower due to the lack of material matching rules. Herein, by changing the end-cap substituent of the small molecule donor from ethyl (MPhS-C2) to benzyl (MPhS-Ph), the different selection rules of donor properties and thermal annealing (TA) treatment between the ASM and the SMD:PA system under tetrahydrofuran processing are thoroughly investigated. Therefore, MPhS-Ph exhibits more ordered molecular packing, leading to better adaptability in the SMD:PA system without TA; while the inferior molecular packing of MPhS-C2 after spin-coating performs better in the ASM system with TA. Whether spin-coating or TA process dominates morphological optimization also dominates their energy loss. Therefore, the MPhS-Ph:PYF-T-o and MPhS-C2:BTP-eC9 based devices achieve the highest power conversion efficiency (PCE) of 12.1% and 15.7%, respectively, both of which are cutting-edge PCEs in their own type of OSCs fabricated by non-halogen solvent. This result suggests that intrinsic strong crystallization independent of the thermal drive is hoped in SMD:PA-OSCs, while high miscibility after spin-coating and proper assembly under thermal drive is expected in ASM-OSCs, providing deep understanding and guidance in highly efficient materials design rules in both ASM-OSCs and SMD:PA-OSCs.

Optimized Crystal Framework by Asymmetric Core Isomerization in Selenium-Substituted Acceptor for Efficient Binary Organic Solar Cells.

Both the regional isomerization and selenium-substitution of the small molecular acceptors (SMAs) play significant roles in developing efficient organic solar cells (OSCs), while their synergistic effects remain elusive. Herein, we developed three isomeric SMAs (S-CSeF, A-ISeF, and A-OSeF) via subtly manipulating the mono-selenium substituted position (central, inner, or outer) and type of heteroaromatic ring on the central core by synergistic strategies for efficient OSCs, respectively. Crystallography of asymmetric A-OSeF presents a closer intermolecular π-π stacking and more ordered 3-dimensional network packing and efficient charge-hopping pathways. With the successive out-shift of the mono-selenium substituted position, the neat films give a slightly wider band gap and gradually higher crystallinity and electron mobility. The PM1 : A-OSeF afford favourable fibrous phase separation morphology with more ordered molecular packing and efficient charge transportation compared to the other two counterparts. Consequently, the A-OSeF-based devices achieve a champion efficiency of 18.5 %, which represents the record value for the reported selenium-containing SMAs in binary OSCs. Our developed precise molecular engineering of the position and type of selenium-based heteroaromatic ring of SMAs provides a promising synergistic approach to optimizing crystal stacking and boosting top-ranked selenium-containing SMAs-based OSCs.

An Efficient Direct Arylation Polycondensation via C-S Bond Cleavage.

The direct arylation polycondensation (DArP) has become one of the most important methods to construct conjugated polymers (CPs). However, the homocoupling side-reactions of aryl halides and the low regioseletive reactivities of unfunctionalized aryls hinder the development of DArP. Here, an efficient Pd and Cu co-catalyzed DArP was developed via inert C-S bond cleavage of aryl thioethers, of which robustness was exemplified by over twenty conjugated polymers (CPs), including copolymers, homopolymers, and random polymers. The capture of oxidative addition intermediate together with experimental and theoretic results suggested the important role of palladium (Pd) and copper (Cu) co-catalysis with a bicyclic mechanism. The studies of NMR, molecular weights, trap densities, two-dimensional grazing-incidence wide-angle X-ray scattering (2D-GIWAXS), and the charge transport mobilities revealed that the homocoupling reactions were significantly suppressed with high regioselectivity of unfunctionalized aryls, suggesting this method is an excellent choice for synthesizing high performance CPs.

Achieving Record-Efficiency Organic Solar Cells upon Tuning the Conformation of Solid Additives.

Volatile solid additives (SADs) are considered as a simple yet effective approach to tune the film morphology for high-performance organic solar cells (OSCs). However, the structural effects of the SADs on the photovoltaic performance are still elusive. Herein, two volatilizable SADs were designed and synthesized. One is SAD1 with twisted conformation, while the other one is planar SAD2 with the S···O noncovalent intramolecular interactions (NIIs). The theoretical and experimental results revealed that the planar SAD2 with smaller space occupation can more easily insert between the Y6 molecules, which is beneficial to form a tighter intermolecular packing mode of Y6 after thermal treatment. As a result, the SAD2-treated OSCs exhibited less recombination loss, more balanced charge mobility, higher hole transfer rate, and more favorable morphology, resulting in a record power conversion efficiency (PCE) of 18.85% (certified PCE: 18.7%) for single-junction binary OSCs. The universality of this study shed light on understanding the conformation effects of SADs on photovoltaic performances of OSCs.

Chiral Non-Fullerene Acceptor Enriched Bulk Heterojunctions Enable High-Performance Near-Infrared Circularly Polarized Light Detection.

Organic photodetectors that can sensitively convert near-infrared (NIR) circularly polarized light (CPL) into modulable electrical signals have promising applications in spectroscopy, imaging, and communications. However, the preparation of chiral NIR organic photodetectors with simultaneously high dissymmetry factor, responsivity, detectivity, and response speed is challenging. Here, direct CPL detectors based on the bulk heterojunctions (BHJs) of chiral BTP-4Cl non-fullerene acceptor with dilute achiral PM6 donor are constructed, which successfully address these issues. The chiral acceptor-enriched BHJs with a donor/acceptor ratio of 1/10 achieve an optimal trade-off between chiroptical properties and optoelectronic performance. The supramolecular chirality from the acceptor aggregates provides the BHJs with a true absorption dissymmetry factor (gabs ) of ±0.02 at 830 nm, the highest value among NIR-sensitive detectors, which endows the photodetector with a photocurrent dissymmetry factor (gsc ) of ±0.03. Impressively, the photodetector demonstrates an external quantum efficiency as high as 60%, a responsivity of 0.4 A W-1 , a detectivity of 3 × 1011 Jones (based on noise current), and a fast response speed on the microsecond scale with the -3 dB bandwidth over 7000 Hz in the NIR region. This study exhibits a promising strategy for building high-performing direct NIR CPL detectors by introducing supramolecular chirality into BHJs.

Alignment of Organic Conjugated Molecules for High-Performance Device Applications.

High-performance organic semiconductor materials as the electroactive components of optoelectronic devices have attracted much attention and made them ideal candidates for solution-processable, large-area, and low-cost flexible electronics. Especially, organic field-effect transistors (OFETs) based on conjugated semiconductor materials have experienced stunning progress in device performance. To make these materials economically viable, comprehensive knowledge of charge transport mechanisms is required. The alignment of organic conjugated molecules in the active layer is vital to charge transport properties of devices. The present review highlights the recent progress of processing-structure-transport correlations that allow the precise and uniform alignment of organic conjugated molecules over large areas for multiple electronic applications, including OFETs, organic thermoelectric devices (OTEs), and organic phototransistors (OPTs). Different strategies for regulating crystallinity and macroscopic orientation of conjugated molecules are introduced to correlate the molecular packing, the device performance, and charge transport anisotropy in multiple organic electronic devices.

The Role of Entropy Gains in the Exciton Separation in Organic Solar Cells.

In organic solar cells (OSCs), the lower dielectric constant of organic semiconductor material induces a strong Coulomb attraction between electron-hole pairs, which leads to a low exciton separation efficiency, especially the charge transfer (CT) state. The CT state formed at the electron-donor (D) and electron-acceptor (A) interface is regarded as an unfavorable property of organic photovoltaic devices. Since the OSC works in a nonzero temperature condition, the entropy effect would be one of the main reasons to overcome the Coulomb energy barrier and must be taken into account. In this review, the present understanding of the entropy-driven charge separation is reviewed and how factors such as the dimensionality of the organic semiconductor, energy disorder effect, the morphology of the active layer, are described, as well as how the nonequilibrium effect affects the entropy contribution in compensating the Coulomb dissociation barrier for CT exciton separation and charge generation process. The investigation of the entropy effect on exciton dissociation mechanism from both theoretical and experimental aspects is focused on, which provides pathways for understanding the underlying mechanisms of exciton separation and further enhancing the efficiency of OSCs.

Imide-Functionalized Fluorenone and Its Cyanated Derivative Based n-Type Polymers: Synthesis, Structure-Property Correlations, and Thin-Film Transistor Performance.

The development of high-performance n-type polymer semiconductors is powered by the design and synthesis of electron-deficient building blocks with optimized physicochemical properties. By meticulously installing an imide group onto fluorene and its cyanated derivative, we report here two very electron-deficient building blocks, imide-functionalized fluorenone (FOI) and its cyanated derivative (FCNI), both featuring a deep-lying lowest unoccupied molecular orbital energy level down to -4.05 eV and highly coplanar framework, endowing them ideal units for constructing n-type polymers. Thus, a series of polymers are built from them, exhibiting unipolar n-type transport character with a highest electron mobility of 0.11 cm2  V-1 s-1 . Hence, FOI and FCNI offer a remarkable platform for accessing high-performance n-type polymers and the imide functionalization of appropriate (hetero)arenes is a powerful strategy for developing polymers with deep-lying LUMOs for n-type organic electronics.

Electron-deficient TVT unit-based D-A polymer donor for high-efficiency thick-film OSCs.

As the power conversion efficiencies of organic solar cells (OSCs) have been improved continuously in recent years, more attention will be paid to the industrial production and practical application of OSCs. However, there are still many problems to be solved in the process of large-scale production. Among them, reducing the costs of the materials and enhancing the film-thickness tolerance of the active layer are the two key points. Therefore, it is urgent to develop organic semiconductor materials which are easy to synthesize and suitable for the construction of high-efficiency, thick-film OSCs. In this work, we have focused on the (E)-2-[2-(thiophen-2-yl)vinyl]thiophene (TVT) unit because of its unique coplanar structure. And we noticed that TVT was mostly used as an electron-donating unit in the previous reports. However, we have modified TVT into electron-withdrawing unit by the introduction of fluorine atoms/ester groups. And two new donor-acceptor (D-A) copolymers have been obtained by combining the electron-withdrawing TVT unit with benzo[2,1-b:4,5-b']dithiophene (BDT) unit. Among them, the polymer based on the ester modified TVT unit presents excellent photovoltaic performance by virtue of its good solubility and preferable molecular stacking mode, and the corresponding devices also show extraordinarily high-thickness tolerance. The emergence of this new electron-withdrawing TVT unit will undoubtedly further promote the development of low-cost, high-efficiency, thick-film OSCs.

Small Exciton Binding Energies Enabling Direct Charge Photogeneration Towards Low-Driving-Force Organic Solar Cells.

Organic solar cells (OSCs) with nonfullerene acceptors (NFAs) exhibit efficient charge generation under small interfacial energy offsets, leading to over 18 % efficiency for the single-junction devices based on the state-of-the-art NFA of Y6. Herein, to reveal the underlying charge generation mechanisms, we have investigated the exciton binding energy (Eb ) in Y6 by a joint theoretical and experimental study. The results show that owing to strong charge polarization effects, Y6 has remarkable small Eb of -0.11-0.15 eV, which is even lower than perovskites in many cases. Moreover, it is peculiar that the photoluminescence is enhanced with temperature, and the energy barrier for separating excitons into charges is evidently lower than the thermal energy according to the temperature dependence of photoluminescence, manifesting direct photogeneration of charge carriers enabled by weak Eb in Y6. Thus, charge generation in NFA-based OSCs shows little dependence on interfacial driving forces.

Side-Chain Engineering for Enhancing the Molecular Rigidity and Photovoltaic Performance of Noncovalently Fused-Ring Electron Acceptors.

Side-chain engineering is an effective strategy to regulate the solubility and packing behavior of organic materials. Recently, a unique strategy, so-called terminal side-chain (T-SC) engineering, has attracted much attention in the field of organic solar cells (OSCs), but there is a lack of deep understanding of the mechanism. Herein, a new noncovalently fused-ring electron acceptor (NFREA) containing two T-SCs (NoCA-5) was designed and synthesized. Introduction of T-SCs can enhance molecular rigidity and intermolecular π-π stacking, which is confirmed by the smaller Stokes shift value, lower reorganization free energy, and shorter π-π stacking distance in comparison to NoCA-1. Hence, the NoCA-5-based device exhibits a record power conversion efficiency (PCE) of 14.82 % in labs and a certified PCE of 14.5 %, resulting from a high electron mobility, a short charge-extraction time, a small Urbach energy (Eu ), and a favorable phase separation.

Electrical Loss Management by Molecularly Manipulating Dopant-free Poly(3-hexylthiophene) towards 16.93 % CsPbI2 Br Solar Cells.

Inorganic cesium lead halide perovskites offer a pathway towards thermally stable photovoltaics. However, moisture-induced phase degradation restricts the application of hole transport layers (HTLs) with hygroscopic dopants. Dopant-free HTLs fail to realize efficient photovoltaics due to severe electrical loss. Herein, we developed an electrical loss management strategy by manipulating poly(3-hexylthiophene) with a small molecule, i.e., SMe-TATPyr. The developed P3HT/SMe-TATPyr HTL shows a three-time increase of carrier mobility owing to breaking the long-range ordering of "edge-on" P3HT and inducing the formation of "face-on" clusters, over 50 % decrease of the perovskite surface defect density, and a reduced voltage loss at the perovskite/HTL interface because of favorable energy level alignment. The CsPbI2 Br perovskite solar cell demonstrates a record-high efficiency of 16.93 % for dopant-free HTL, and superior moisture and thermal stability by maintaining 96 % efficiency at low-humidity condition (10-25 % R. H.) for 1500 hours and over 95 % efficiency after annealing at 85 °C for 1000 hours.