RESUMO
Three-dimensional (3D) imaging sensors allow machines to perceive, map and interact with the surrounding world1. The size of light detection and ranging (LiDAR) devices is often limited by mechanical scanners. Focal plane array-based 3D sensors are promising candidates for solid-state LiDARs because they allow electronic scanning without mechanical moving parts. However, their resolutions have been limited to 512 pixels or smaller2. In this paper, we report on a 16,384-pixel LiDAR with a wide field of view (FoV, 70° × 70°), a fine addressing resolution (0.6° × 0.6°), a narrow beam divergence (0.050° × 0.049°) and a random-access beam addressing with sub-MHz operation speed. The 128 × 128-element focal plane switch array (FPSA) of grating antennas and microelectromechanical systems (MEMS)-actuated optical switches are monolithically integrated on a 10 × 11-mm2 silicon photonic chip, where a 128 × 96 subarray is wire bonded and tested in experiments. 3D imaging with a distance resolution of 1.7 cm is achieved with frequency-modulated continuous-wave (FMCW) ranging in monostatic configuration. The FPSA can be mass-produced in complementary metal-oxide-semiconductor (CMOS) foundries, which will allow ubiquitous 3D sensors for use in autonomous cars, drones, robots and smartphones.
RESUMO
The rapid development of micromanipulation technologies has opened exciting new opportunities for the actuation, selection and assembly of a variety of non-biological and biological nano/micro-objects for applications ranging from microfabrication, cell analysis, tissue engineering, biochemical sensing, to nano/micro-machines. To date, a variety of precise, flexible and high-throughput manipulation techniques have been developed based on different physical fields. Among them, optoelectronic tweezers (OET) is a state-of-art technique that combines light stimuli with electric field together by leveraging the photoconductive effect of semiconductor materials. Herein, the behavior of micro-objects can be directly controlled by inducing the change of electric fields on demand in an optical manner. Relying on this light-induced electrokinetic effect, OET offers tremendous advantages in micromanipulation such as programmability, flexibility, versatility, high-throughput and ease of integration with other characterization systems, thus showing impressive performance compared to those of many other manipulation techniques. A lot of research on OET have been reported in recent years and the technology has developed rapidly in various fields of science and engineering. This work provides a comprehensive review of the OET technology, including its working mechanisms, experimental setups, applications in non-biological and biological scenarios, technology commercialization and future perspectives.
Assuntos
Micromanipulação , Semicondutores , Micromanipulação/métodos , Eletricidade , Pinças ÓpticasRESUMO
The rate of spontaneous emission from an optical emitter can be greatly enhanced using a metallic optical antenna at the penalty of efficiency. In this paper we propose a metal-dielectric antenna that eliminates the tradeoff between spontaneous emission enhancement and radiative efficiency by using nanoscopic dielectric structures at the antenna tips. This tradeoff occurs due to Ohmic loss and is further exacerbated by electron surface collisions. We find that our metal-dielectric antenna can enhance spontaneous emission by a factor 5 × 105 with efficiency = 70%, greatly exceeding the radiative efficiency of a purely metallic antenna with similar enhancement. Moreover, the metal-dielectric antenna design strategy is naturally amenable to short-distance optical communications applications. We go on to discuss the Purcell effect within the context of antenna enhancement. Metallic optical antennas are best analyzed with conventional antenna circuit models, but if the Purcell enhancement were to be employed, we provide the effective mode volume, Veff = (3/4π2)2d2λ(λ/l)5, that would be needed.
RESUMO
We report on a laser frequency sweep linearization method by iterative learning pre-distortion for frequency-modulated continuous-wave (FMCW) light detection and ranging (LiDAR) systems. A pre-distorted laser drive voltage waveform that results in a linear frequency sweep is obtained by an iterative learning controller, and then applied to the FMCW LiDAR system. We have also derived a fundamental figure of merit for the maximum residual nonlinearity needed to achieve the transform-limited range resolution. This method is experimentally tested using a commercial vertical cavity surface-emitting laser (VCSEL) and a distributed feedback (DFB) laser, achieving less than 0.005% relative residual nonlinearity of frequency sweep. With the proposed method, high-performance FMCW LiDAR systems can be realized without expensive linear lasers, complex linearization setups, or heavy post-processing.
RESUMO
Efficient high-speed nanoscale optical sources are required for low-power next-generation data communication. Here we propose an integrated antenna-LED on a single-mode optical waveguide. By leveraging inverse design optimization, we achieved a waveguide coupling efficiency of 94% and an antenna efficiency of 64%, while maintaining a high average enhancement of 144 - potentially enabling >100GHz direct modulation.
RESUMO
We report on 4x20 silicon photonic MEMS switch that is capable of multicasting. The switch is built on passive optical crossbar network with gap-adjustable directional couplers. The switch has high on-off extinction ratio (59 dB), low insertion loss (< 4.0 dB), small footprint (1.2x4.5 mm2), and fast response (9.8 µs). The switching voltage is 9.6 V and 20 dB bandwidth is 31.5 nm. One-to-two and one-to-four multicast operations are demonstrated.
RESUMO
We present a design for an analog phase shifter based on Silicon Photonic MEMS technology. The operation principle is based on a two-step parallel plate electrostatic actuation mechanism to bring a vertically movable suspended tapered waveguide in a first step into proximity of the bus waveguide and to tune the phase of the propagating coupled mode in a second step by actuation of the suspended waveguide to tune the vertical gap. In the coupled state, the effective index of the optical supermode and the total accumulated phase delay can be varied by changing the vertical separation between the adiabatically tapered suspended and the fixed bus waveguides. Simulations predict that π phase shift can be achieved with an actuation voltage of 19 V, corresponding to a displacement of 19 nm. With an adiabatic coupler geometry, the optical signal can be coupled between the moving waveguide and the bus waveguide with low loss in a wide wavelength range from 1.5 µm to 1.6 µm keeping the average insertion loss below 0.3 dB.
RESUMO
Long-range shape measurement with high accuracy is needed for precision manufacturing of large-scale parts such as turbines, compressors, and trains. We have developed a high-accuracy ranging system based on frequency-modulated continuous-wave (FMCW) technology. Our system has two unique features. First, it achieves high-accuracy range measurement by directly modulating a low-cost vertical-cavity surface-emitting laser (VCSEL) at high sweep rates. The nonlinearity of the optical frequency sweep is compensated for by resampling through a reference interferometer. Second, an optical fiber with multiple fiber Bragg grating (FBG) structures is used for distance calibration. Ranging accuracy better than 10 µm is achieved at 2 m distance. Three-dimensional (3D) imaging of 10-cubic-meter volume has been obtained by combining the FMCW ranging with a galvanometer scanner.
RESUMO
Low propagation loss Ge23Sb7S70 waveguides (0.56 dB/cm) are fabricated in a wafer scale process. Simulation of a 2 cm long, 1.2 µm wide waveguide with 100 ps/nm/km peak dispersion predicts coherent supercontinuum generation at 1.55 µm pump wavelength. Octave-spanning supercontinuum using a dispersive wave is experimentally demonstrated using picojoule-level energy (26 pJ, 240 fs pulse width, 77 W peak power) pulses.
RESUMO
Atoms and molecules are too small to act as efficient antennas for their own emission wavelengths. By providing an external optical antenna, the balance can be shifted; spontaneous emission could become faster than stimulated emission, which is handicapped by practically achievable pump intensities. In our experiments, InGaAsP nanorods emitting at â¼ 200 THz optical frequency show a spontaneous emission intensity enhancement of 35 × corresponding to a spontaneous emission rate speedup â¼ 115 ×, for antenna gap spacing, d = 40 nm. Classical antenna theory predicts â¼ 2,500 × spontaneous emission speedup at d â¼ 10 nm, proportional to 1/d(2). Unfortunately, at d < 10 nm, antenna efficiency drops below 50%, owing to optical spreading resistance, exacerbated by the anomalous skin effect (electron surface collisions). Quantum dipole oscillations in the emitter excited state produce an optical ac equivalent circuit current, I(o) = qω|x(o)|/d, feeding the antenna-enhanced spontaneous emission, where q|x(o)| is the dipole matrix element. Despite the quantum-mechanical origin of the drive current, antenna theory makes no reference to the Purcell effect nor to local density of states models. Moreover, plasmonic effects are minor at 200 THz, producing only a small shift of antenna resonance frequency.
RESUMO
We present a comprehensive study for a new three-branch widely tunable semiconductor laser based on a self-imaging, lossless multi-mode interference (MMI) coupler. We have developed a general theoretical framework that is applicable to all types of interferometric lasers. Our analysis showed that the three-branch laser offers high side-mode suppression ratios (SMSRs) while maintaining a wide tuning range and a low threshold modal gain of the lasing mode. We also present the design rules for tuning over the dense-wavelength division multiplexing grid over the C-band.
RESUMO
Increasing power consumption in traditional on-chip metal interconnects has made optical links an attractive alternative. However, such a link is currently missing a fast, efficient, nanoscale light-source. Coupling nanoscale optical emitters to optical antennas has been shown to greatly increase their spontaneous emission rate and efficiency. Such a structure would be an ideal emitter for an on-chip optical link. However, there has never been a demonstration of an antenna-enhanced emitter coupled to a low-loss integrated waveguide. In this Letter we demonstrate an optical antenna-enhanced nanoLED coupled to an integrated InP waveguide. The nanoLEDs are comprised of a nanoridge of InGaAsP coupled to a gold antenna that exhibits a 36× enhanced rate of spontaneous emission. Coupling efficiencies as large as 70% are demonstrated into an integrated waveguide. Directional antennas also demonstrate direction emission down one direction of a waveguide with observed front-to-back ratios as high as 3:1.
RESUMO
When light is incident on 2D transition metal dichalcogenides (TMDCs), it engages in multiple reflections within underlying substrates, producing interferences that lead to enhancement or attenuation of the incoming and outgoing strength of light. Here, we report a simple method to engineer the light outcoupling in semiconducting TMDCs by modulating their dielectric surroundings. We show that by modulating the thicknesses of underlying substrates and capping layers, the interference caused by substrate can significantly enhance the light absorption and emission of WSe2, resulting in a â¼11 times increase in Raman signal and a â¼30 times increase in the photoluminescence (PL) intensity of WSe2. On the basis of the interference model, we also propose a strategy to control the photonic and optoelectronic properties of thin-layer WSe2. This work demonstrates the utilization of outcoupling engineering in 2D materials and offers a new route toward the realization of novel optoelectronic devices, such as 2D LEDs and solar cells.
RESUMO
We present a novel waveguide coupling scheme where a germanium diode grown via rapid melt growth is wrapped around a silicon waveguide. A 4 fF PIN photodiode is demonstrated with 0.95 A/W responsivity at 1550 nm, 6 nA dark current, and nearly 9 GHz bandwidth. Devices with shorter intrinsic region exhibit higher bandwidth (30 GHz) and slightly lower responsivity (0.7 A/W). An NPN phototransistor is also demonstrated using the same design with 14 GHz f(T).
RESUMO
A comprehensive theoretical model for the long-wavelength micro-electro-mechanical-tunable high-contrast-grating vertical-cavity surface-emitting lasers is presented. Our band structure model calculates the optical gain and spontaneous emission of the InGaAlAs quantum well active region. The grating reflectivity and the cavity resonance condition are investigated through optical modeling. Correlating the results with the electrostatic model for the micro-electro-mechanical system, we accurately predict the measurements on the voltage-contolled lasing wavelength. Furthermore, our calculated temperature-dependent wavelength-tunable light output vs. current (L-I) curves show excellent agreement with experiment.
RESUMO
We report on microelectromechanical systems (MEMS)-actuated 32 × 32 optical phased arrays (OPAs) with high fill-factors and microsecond response time. To reduce the mirror weight and temperature-dependent curvature, we use high-contrast-grating (HCG) mirrors comprising a single layer of sub-wavelength polysilicon gratings with 400 nm thickness, 1250 nm pitch, and 570 nm grating bar width. The mirror has a broad reflection band and a peak reflectivity of 99.9% at 1550 nm wavelength. With 20 × 20 µm2 pixels and 2 µm, the OPA has a total aperture of 702 × 702 µm2 and a fill factor of 85%. The OPA is electrostatically controlled by voltage and has a total field of view of ± 2°, an instantaneous field of view (beam width) of 0.14°, and a response time of 3.8 µs. The latter agrees well with the mechanical resonance frequency of the HCG mirror (0.42 MHz).
RESUMO
We report a high speed 8x8 optical phased array using tunable 1550 nm all-pass filters with ultrathin high contrast gratings (HCGs) as the microelectromechanical-actuated top reflectors. The all-pass filter design enables a highly efficient phase tuning (1.7 π) with a small actuation voltage (10 V) and actuation displacement of the HCG (50 nm). The microelectromechanical HCG structure facilitates a high phase tuning speed >0.5 MHz. Beam steering is experimentally demonstrated with the optical phased array.
RESUMO
We propose two designs of nanoscale sub-fF germanium photodiodes which are efficiently integrated with silicon waveguides. The metal-optic cavities are simulated with the finite difference time domain method and optimized using critical coupling concepts. One design is for a metal semiconductor metal photodiode with <200 aF capacitance, 39% external quantum efficiency, and 0.588 (λ/n)³ cavity volume at 1.5 µm wavelength. The second design is for a vertical p-i-n photodiode with <100 aF capacitance, 51% external quantum efficiency, and 0.804 (λ/n)³ cavity volume. Both designs make use of CMOS compatible materials germanium and aluminum metal for potential future monolithic integration with silicon photonics.
RESUMO
Optical antennas have been widely used for sensitive photodetection, efficient light emission, high resolution imaging, and biochemical sensing because of their ability to capture and focus light energy beyond the diffraction limit. However, widespread application of optical antennas has been limited due to lack of appropriate methods for uniform and large area fabrication of antennas as well as difficulty in achieving an efficient design with small mode volume (gap spacing < 10nm). Here, we present a novel optical antenna design, arch-dipole antenna, with optimal radiation efficiency and small mode volume, 5 nm gap spacing, fabricated by CMOS-compatible deep-UV spacer lithography. We demonstrate strong surface-enhanced Raman spectroscopy (SERS) signal with an enhancement factor exceeding 108 from the arch-dipole antenna array, which is two orders of magnitude stronger than that from the standard dipole antenna array fabricated by e-beam lithography. Since the antenna gap spacing, the critical dimension of the antenna, can be defined by deep-UV lithography, efficient optical antenna arrays with nanometer-scale gap can be mass-produced using current CMOS technology.
Assuntos
Nanotecnologia/instrumentação , Fotometria/instrumentação , Refratometria/instrumentação , Semicondutores , Ressonância de Plasmônio de Superfície/instrumentação , Desenho de Equipamento , Análise de Falha de EquipamentoRESUMO
We propose a cladding engineering method that flexibly modifies the radiation patterns and rates of metal-clad nanoscale optical cavity. Optimally adjusting the cladding symmetry of the metal-clad nanoscale optical cavity modifies the modal symmetry and produces highly directional radiation that leads to 90% coupling efficiency into an integrated waveguide. In addition, the radiation rate of the cavity mode can be matched to its absorption rate by adjusting the thickness of the bottom-cladding layer. This approach optimizes the energy-flow rate from the waveguide and maximizes the energy confined inside the nanoscale optical cavity.