Buried interface molecular hybrid for inverted perovskite solar cells.

Perovskite solar cells (PSCs) with an "inverted" architecture are a key pathway for commercializing this emerging photovoltaic technology due to the better power conversion efficiency (PCE) and operational stability as compared to the "normal" device structure. Specifically, PCEs of the inverted PSCs have exceeded 25% owing to the development of improved self-assembled molecules (SAMs)1-5 and passivation strategies6-8. Nevertheless, poor wettability and agglomerations of SAMs9-12 will cause interfacial losses, impeding further improvement in PCE and stability. Herein, we report on molecular hybrid at the buried interface in inverted PSCs by co-assembling a multiple carboxylic acid functionalized aromatic compound of 4,4',4''-nitrilotribenzoicacid (NA) with a popular SAM of [4-(3,6-dime-thyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) to improve the heterojunction interface. The molecular hybrid of Me-4PACz with NA could substantially improve the interfacial characteristics. The resulting inverted PSCs demonstrated a record-certified steady-state efficiency of 26.54%. Crucially, this strategy aligns seamlessly with large-scale manufacturing, achieving the highest certified PCE for inverted mini-modules at 22.74% (aperture area: 11.1 cm2). Our device also maintained 96.1% of its initial PCE after more than 2,400 hours of 1-sun operation in ambient air.

Homogenizing out-of-plane cation composition in perovskite solar cells.

Perovskite solar cells with the formula FA1-xCsxPbI3, where FA is formamidinium, provide an attractive option for integrating high efficiency, durable stability and compatibility with scaled-up fabrication. Despite the incorporation of Cs cations, which could potentially enable a perfect perovskite lattice1,2, the compositional inhomogeneity caused by A-site cation segregation is likely to be detrimental to the photovoltaic performance of the solar cells3,4. Here we visualized the out-of-plane compositional inhomogeneity along the vertical direction across perovskite films and identified the underlying reasons for the inhomogeneity and its potential impact for devices. We devised a strategy using 1-(phenylsulfonyl)pyrrole to homogenize the distribution of cation composition in perovskite films. The resultant p-i-n devices yielded a certified steady-state photon-to-electron conversion efficiency of 25.2% and durable stability.

Bridging the Interfacial Contact for Improved Stability and Efficiency of Inverted Perovskite Solar Cells.

Inverted perovskite solar cells (PSCs) have received widespread attention due to their facile fabrication and wide applications. However, their power conversion efficiency (PCE) is reported lower than that of regular PSCs because of the undesirable interfacial contact between perovskite and the hydrophobic hole transport layer (HTL). Here, an interface regulation strategy is proposed to overcome this limitation. A small molecule ([2-(9H-carbazol-9-yl) ethyl] phosphonic acid, abbreviated as 2P), composed of carbazole and phosphonic acid groups, is inserted between perovskite and HTL. Morphological characterization and theoretical calculation reveal that perovskite bonds stronger on 2P-modified HTL than on pristine HTL. The improved interfacial contact facilitates hole extraction and retards degradation. Upon the incorporation of 2P, inverted PSCs deliver a high PCE of over 22% with superior stability, keeping 84.6% of initial efficiency after 7200 h storage under an ambient atmosphere with a relative humidity of ≈30-40%. This strategy provides a simple and efficient way to boost the performance of inverted PSCs.

Highly Orientational Order Perovskite Induced by In situ-generated 1D Perovskitoid for Efficient and Stable Printable Photovoltaics.

Employing low-dimensional perovskite has been proven to be a promising approach to enhance the efficiency and stability of perovskite solar cells. Here, thiopheniformamidine hydrochloride is introduced into CH3 NH3 PbI3 -based printable mesoscopic perovskite solar cells, to form 1D iodide lead thiophenamidine (TFPbI3 ) in situ. This judiciously designed low-dimensional perovskite can effectively passivate the defect of perovskite and induce the perovskite crystals to grow in a direction perpendicular to the substrate. Thus, the obtained 1D@3D perovskite could suppress the charge recombination and promote the charge transfer significantly. Benefiting from its dual effect and robustness, a significantly improved power conversion efficiency of 17.42% is yielded. The authors also develop high-performance printable mesoscopic perovskite solar cells with a champion efficiency approaching 13% for aperture area about 11.8 cm2 , as well as outstanding operational stability, retaining 90% of the original power conversion efficiency after 1000 hours of continuous illumination at the maximum power point in air.

Carbon Nitride with Rationally Designed π-Conjugated Structure for Bright Blue-Violet Light-Emitting Diodes.

Carbon nitride consisting of the broken π-conjugated structure (bc-CN) is designed as the emitting layer in a blue-violet light emitting diode (LED). The bc-CN is prepared by a metal-oxide (MgO) template-assisted method, in which the low reaction temperature and nano MgO jointly control the degree of polymerization to form cyano groups and broken π-conjugation in the bc-CN nanosheets (bc-CN NS) which emit intense blue-violet photoluminescence at 412 nm. The broken π-conjugated heptazine-ring structure in the bc-CN NS mitigates non-radiation energy loss and promotes the d*-LP transition. As a result, a high quantum efficiency of 73.1% is achieved. The excellent dispersing ability of the bc-CN NS enables solution-based fabrication of the light emitting diode (LED). The LED exhibits intense electroluminescence of 236 cd m-2 at 412 nm with an external quantum efficiency of 0.46%. The broken π-conjugation modulates the optical properties of the polymerized carbon nitride semiconductor giving rise to intense blue-violet electroluminescence, which is very desirable for printable and wide-color-gamut display devices.

Water-Soluble Conjugated Polyelectrolyte Hole Transporting Layer for Efficient Sky-Blue Perovskite Light-Emitting Diodes.

An optimized charge transporting layer (CTL) under perovskite film is crucial for efficient photoelectric devices. Here, a new water-soluble conjugated polyeletrolyte (CPE) with CH3 NH3 + (MA+ ) counterion termed as TB(MA) is used as the hole transporting layer (HTL) instead of the acidic poly(3,4-ethylenedioxythiophene):poly-styrene sulfonate (PEDOT:PSS) in sky-blue perovskite light-emitting diodes (PeLEDs). The inherent hydrophilicity of CPE enables a well-growth of quasi-2D perovskite layer with uniform and compact morphology, enhanced crystallinity with rare defect density and excellent energy transfer, resulting in a high photoluminescence quantum yield (PLQY) up to 62.0%. Especially, the MA+ counterion is able to passivate the interfacial defects in the perovskite, which optimize the interfacial compatibility between HTL and perovskite film. Finally, efficient sky-blue PeLEDs, emitting at 488 nm, are fabricated with high external quantum efficiency (EQE) up to 13.5% by using CPE as HTL. In addition, due to the low-temperature processability of water-soluble CPE, an efficient flexible sky-blue PeLEDs based on PEN/ITO substrate is also obtained with high EQE of 8.3%. Using CPE as HTL is an effective strategy toward fabricating efficient blue PeLEDs.

Tuning the Electrochemical Performance of Titanium Carbide MXene by Controllable In Situ Anodic Oxidation.

MXenes are a class of two-dimensional (2D) transition metal carbides, nitrides and carbonitrides that have shown promise for high-rate pseudocapacitive energy storage. However, the effects that irreversible oxidation have on the surface chemistry and electrochemical properties of MXenes are still not understood. Here we report on a controlled anodic oxidation method which improves the rate performance of titanium carbide MXene (Ti3 C2 Tx, Tx refers to -F, =O, -Cl and -OH) electrodes in acidic electrolytes. The capacitance retention at 2000 mV s-1 (with respect to the lowest scan rate of 5 mV s-1 ) increases gradually from 38 % to 66 % by tuning the degree of anodic oxidation. At the same time, a loss in the redox behavior of Ti3 C2 Tx is evident at high anodic potentials after oxidation. Several analysis methods are employed to reveal changes in the structure and surface chemistry while simultaneously introducing defects, without compromising electrochemically active sites, are key factors for improving the rate performance of Ti3 C2 Tx . This study demonstrates improvement of the electrochemical performance of MXene electrodes by performing a controlled anodic oxidation.

An Open-Circuit Voltage and Power Conversion Efficiency Study of Fullerene Ternary Organic Solar Cells Based on Oligomer/Oligomer and Oligomer/Polymer.

Variations in the open-circuit voltage (Voc ) of ternary organic solar cells are systematically investigated. The initial study of these devices consists of two electron-donating oligomers, S2 (two units) and S7 (seven units), and the electron-accepting [6,6]-phenyl C71 butyric acid methyl ester (PC71 BM) and reveals that the Voc is continuously tunable due to the changing energy of the charge transfer state (Ect ) of the active layers. Further investigation suggests that Voc is also continuously tunable upon change in Ect in a ternary blend system that consists of S2 and its corresponding polymer (P11):PC71 BM. It is interesting to note that higher power conversion efficiencies can be obtained for both S2:S7:PC71 BM and S2:P11:PC71 BM ternary systems compared with their binary systems, which can be ascribed to an improved Voc due to the higher Ect and an improved fill factor due to the improved film morphology upon the incorporation of S2. These findings provide a new guideline for the future design of conjugated polymers for achieving higher performance of ternary organic solar cells.

PET-based bisBODIPY photosensitizers for highly efficient excited triplet state and singlet oxygen generation: tuning photosensitizing ability by dihedral angles.

Herein, four covalent BODIPY heterodimers that differ by dihedral angles were shown to be highly efficient excited triplet state (T1) photosensitizers (PSs) for singlet oxygen formation with a quantum yield (ΦΔ) of up to 0.94 as compared to their respective monomers, which had only negligible ΦΔ of ca. 0.060. More interestingly, these PSs generate T1via charge recombination mechanism rather than traditional inter-system crossing. The photosensitizing ability of dimers is easily tuned by either the dihedral angle (between the two linked BODIPYs) or solvent polarity. Laser flash photolysis, time-resolved and steady state fluorescence, quantum chemical calculation, as well as thermodynamic analysis were employed to study the associated photophysical process to reveal the T1 formation mechanism: photo-induced electron transfer (PET) followed by charge recombination. Due to its heavy-atom-free nature, polarity selectivity, high efficiency, and easy tunability, this PET-based PS and its mechanism are very useful in developing new PS for photodynamic therapy of tumors, photobiology, and organic photochemistry.

A multi-layer reduced graphene oxide catalyst encapsulating a high-entropy alloy for rechargeable zinc-air batteries.

A reduced graphene oxide encapsulating Fe6Ni20Co2Mn2Cu1.5@rGO catalyst is prepared using a Joule heating strategy. The graphene-coated layer with high crystallinity enhances the stability of the crystal structure, resulting in superior OER activity. Rechargeable zinc-air batteries with Fe6Ni20Co2Mn2Cu1.5@rGO demonstrate remarkable performance, boasting a high specific capacity of 800 mA h gZn-1, an impressive peak power density of 154.612 mW cm-2, and a cycle life of 300 hours at a current density of 10 mA cm-2.

Asymmetric Coordination of Bimetallic Fe-Co Single-Atom Pairs toward Enhanced Bifunctional Activity for Rechargeable Zinc-Air Batteries.

The advancement of rechargeable zinc-air batteries (RZABs) faces challenges from the pronounced polarization and sluggish kinetics of oxygen reduction and evolution reactions (ORR and OER). Single-atom catalysts offer an effective solution, yet their insufficient or singular catalytic activity hinders their development. In this work, a dual single-atom catalyst, FeCo-SAs, was fabricated, featuring atomically dispersed N3-Fe-Co-N4 sites on N-doped graphene nanosheets for bifunctional activity. Introducing Co into Fe single-atoms and secondary pyrolysis altered Fe coordination with N, creating an asymmetric environment that promoted charge transfer and increased the density of states near the Fermi level. This catalyst achieved a narrow potential gap of 0.616 V, with a half-wave potential of 0.884 V for ORR (vs the reversible hydrogen electrode) and a low OER overpotential of 270 mV at 10 mA cm-2. Owing to the superior activity of FeCo-SAs, RZABs exhibited a peak power density of 203.36 mW cm-2 and an extended cycle life of over 550 h, exceeding the commercial Pt/C + IrO2 catalyst. Furthermore, flexible RZABs with FeCo-SAs demonstrated the promising future of bimetallic pairs in wearable energy storage devices.

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells.

Nickel oxide (NiOx ) is one of the most promising hole transport materials for inverted perovskite solar cells (PSCs). However, its application is severely restrained due to unfavorable interfacial reactions and insufficient charge carrier extraction. Herein, a multifunctional modification at the NiOx /perovskite interface is developed via introducing fluorinated ammonium salt ligand to synthetically solve the obstacles. Specifically, the interface modification can chemically convert detrimental Ni≥3+ to lower oxidation state, resulting in the elimination of interfacial redox reactions. Meanwhile, interfacial dipole is incorporated simultaneously to tune the work function of NiOx and optimize energy level alignment, which effectively promotes the charge carrier extraction. Therefore, the modified NiOx -based inverted PSCs achieve a remarkable power conversion efficiency (PCE) of 22.93%. Moreover, the unencapsulated devices obtain a significantly enhanced long-term stability, maintaining over 85% and 80% of the initial PCEs after storage in ambient air with a high relative humidity of 50-60% for 1000 h and continuous operation at maximum power point under one-sun illumination for 700 h, respectively.

Functional-Group-Induced Single Quantum Well Dion-Jacobson 2D Perovskite for Efficient and Stable Inverted Perovskite Solar Cells.

In two-dimensional/three-dimensional (2D/3D) perovskite heterostructure, randomly distributed multiple quantum wells (QW) 2D perovskites are frequently generated, which are detrimental to carrier transport and structural stability. Here, the high quality 2D/3D perovskite heterostructure is constructed by fabricating functional-group-induced single QW Dion-Jacobson (DJ) 2D perovskites. The utilization of ─OCH3 in the precursor solution facilitates the formation of colloidal particles with uniform size, resulting in the production of a pure 2D DJ perovskite with an n value of 3. This strategy facilitates the improvement of 3D structural stability and expedites carrier transport. The resultant devices accomplish a power conversion efficiency of 25.26% (certified 25.04%) and 23.56% at a larger area (1 cm2 ) with negligible hysteresis. The devices maintain >96% and >89% of their initial efficiency after continuous maximum power point tracking under simulated AM1.5 illumination for 1300 h and under damp-heat conditions (85 °C and 85% RH) for 1010 h, respectively.

Aqueous synthesis of perovskite precursors for highly efficient perovskite solar cells.

High-purity precursor materials are vital for high-efficiency perovskite solar cells (PSCs) to reduce defect density caused by impurities in perovskite. In this study, we present aqueous synthesized perovskite microcrystals as precursor materials for PSCs. Our approach enables kilogram-scale mass production and synthesizes formamidinium lead iodide (FAPbI3) microcrystals with up to 99.996% purity, with an average value of 99.994 ± 0.0015%, from inexpensive, low-purity raw materials. The reduction in calcium ions, which made up the largest impurity in the aqueous solution, led to the greatest reduction in carrier trap states, and its deliberate introduction was shown to decrease device performance. With these purified precursors, we achieved a power conversion efficiency (PCE) of 25.6% (25.3% certified) in inverted PSCs and retained 94% of the initial PCE after 1000 hours of continuous simulated solar illumination at 50°C.

Depression screening using hybrid neural network.

Depression is a common cause of increased suicides worldwide, and studies have shown that the number of patients suffering from major depressive disorder (MDD) increased several-fold during the COVID-19 pandemic, highlighting the importance of disease detection and depression management, while increasing the need for effective diagnostic tools. In recent years, machine learning and deep learning methods based on electroencephalography (EEG) have achieved significant results in the field of automatic depression detection. However, most current studies have focused on a small number of EEG signal channels, and experimental data require special processing by professionals. In this study, 128 channels of EEG signals were simply filtered and 24-fold leave-one-out cross-validation experiments were performed using 2DCNN-LSTM classifier, support vector machine, K-nearest neighbor and decision tree. The current results show that the proposed 2DCNN-LSTM model has an average classification accuracy of 95.1% with an AUC of 0.98 for depression detection of 6-second participant EEG signals, and the model is much better than 72.05%, 79.7% and 79.49% for support vector machine, K nearest neighbor and decision tree. In addition, we found that the model achieved a 100% probability of correctly classifying the EEG signals of 300-second participants.

Rechargeable Zinc-Air Batteries with an Ultralarge Discharge Capacity per Cycle and an Ultralong Cycle Life.

A conventional two-electrode rechargeable zinc-air battery (RZAB) has two major problems: 1) opposing requirements for the oxygen reduction (ORR) and oxygen evolution (OER) reactions from the catalyst at the air cathode; and 2) zinc-dendrite formation, hydrogen generation, and zinc corrosion at the zinc anode. To tackle these problems, a three-electrode RZAB (T-RZAB) including a hydrophobic discharge cathode, a hydrophilic charge cathode, and a zinc-free anode is developed. The decoupled cathodes enable fast ORR and OER kinetics, and avoid oxidization of the ORR catalyst. The zinc-free anode using tin-coated copper foam that induces the growth of (002)Zn planes, suppresses hydrogen evolution, and prevents Zn corrosion. As a result, the T-RZABs have a high discharge capacity per cycle of 800 mAh cm-2 , a low voltage gap between the discharge/charge platforms of 0.66 V, and an ultralong cycle life of 5220 h at a current density of 10 mA cm-2 . A large T-RZAB with a discharge capacity of 10 Ah per cycle with no obvious degradation after cycling for 1000 h is developed. Finally, a T-RZAB pack that has an energy density of 151.8 Wh kg-1 and a low cost of 46.7 US dollars kWh-1  is assembled.

Tuning Perovskite Surface Polarity via Dipole Moment Engineering for Efficient Hole-Transport-Layer-Free Sn-Pb Mixed-Perovskite Solar Cells.

Post-treatment has been recognized as one of the effective methods for passivating the underlying defects in perovskite solar cells (PSCs), but little attention has been paid to how to pick suitable passivation agents with diverse isomers for efficient PSCs, particularly for the tin-lead (Sn-Pb) mixed PSCs. Here, we introduce the dependence of the power conversion efficiency (PCE) on a dipole moment for surface passivator screening, in which we chose three trifluoromethyl-phenylethylamine hydroiodide (CF3-PEAI) isomers as surface-treatment materials for hole-transport-layer-free (HTL-free) Sn-Pb mixed PSCs. The different positions of the -CF3 group for the CF3-PEAI isomer result in different dipole moments, which influences the interaction between CF3-PEAI and lead iodide. The para position CF3 with the highest dipole moment exhibits a higher PCE than the ortho-position with a lower dipole moment, which is attributed to the large dipole moment on the surface that could tune the surface polarity from p-type to n-type, facilitating electron charge transport in the HTL-free Sn-Pb mixed PSCs. An ultrathin 2D layer is formed on the perovskite surface to passivate the surface defects, which is responsible for the enhancement of the PCE and stability of the PSCs. As a result, the open-circuit voltage (VOC) of the device is improved from 0.775 to 0.824 V, yielding a champion PCE of 20.17%, which is one of the highest PCEs among the reported HTL-free Sn-Pb mixed PSCs. The device also shows improved stability with remaining 75% of its initial PCEs after storage in N2 for 700 h.

Efficient and stable organic solar cells enabled by multicomponent photoactive layer based on one-pot polymerization.

Degradation of the kinetically trapped bulk heterojunction film morphology in organic solar cells (OSCs) remains a grand challenge for their practical application. Herein, we demonstrate highly thermally stable OSCs using multicomponent photoactive layer synthesized via a facile one-pot polymerization, which show the advantages of low synthetic cost and simplified device fabrication. The OSCs based on multicomponent photoactive layer deliver a high power conversion efficiency of 11.8% and exhibit excellent device stability for over 1000 h (>80% of their initial efficiency retention), realizing a balance between device efficiency and operational lifetime for OSCs. In-depth opto-electrical and morphological properties characterizations revealed that the dominant PM6-b-L15 block polymers with backbone entanglement and the small fraction of PM6 and L15 polymers synergistically contribute to the frozen fine-tuned film morphology and maintain well-balanced charge transport under long-time operation. These findings pave the way towards the development of low-cost and long-term stable OSCs.

Deciphering the Morphology Change and Performance Enhancement for Perovskite Solar Cells Induced by Surface Modification.

Organic-inorganic perovskite solar cells (PSCs) have achieved great attention due to their expressive power conversion efficiency (PCE) up to 25.7%. To improve the photovoltaic performance of PSCs, interface engineering between the perovskite and hole transport layer (HTL) is a widely used strategy. Following this concept, benzyl trimethyl ammonium chlorides (BTACls) are used to modify the wet chemical processed perovskite film in this work. The BTACl-induced low dimensional perovskite is found to have a bilayer structure, which efficiently decreases the trap density and improves the energy level alignment at the perovskite/HTL interface. As a result, the BTACl-modified PSCs show an improved PCE compared to the control devices. From device modeling, the reduced charge carrier recombination and promoted charge carrier transfer at the perovskite/HTL interface are the cause of the open-circuit (Voc ) and fill factor (FF) improvement, respectively. This study gives a deep understanding for surface modification of perovskite films from a perspective of the morphology and the function of enhancing photovoltaic performance.

Flexible Zinc-Air Batteries with Ampere-Hour Capacities and Wide-Temperature Adaptabilities.

Flexible Zn-air batteries (FZABs) have significant potentials as efficient energy storage devices for wearable electronics because of their safeties and high energy-to-cost ratios. However, their application is limited by their short cycle lives, low discharge capacities per cycle, and high charge/discharge polarizations. Accordingly, herein, a poly(sodium acrylate)-polyvinyl alcohol (PANa-PVA)-ionic liquid (IL) hydrogel (PANa-PVA-IL) is prepared using a hygroscopic IL, 1-ethyl-3-methylimidazolium chloride, as an additive for twin-chain PANa-PVA. PANa-PVA-IL exhibits a high conductivity of 306.9 mS cm-1 and a water uptake of 2515 wt% at room temperature. Moreover, a low-cost bifunctional catalyst, namely, Co9 S8 nanoparticles anchored on N- and S-co-doped activated carbon black pearls 2000 (Co9 S8 -NSABP), is synthesized, which demonstrates a low O2 reversibility potential gap of 0.629 V. FZABs based on PANa-PVA-IL and Co9 S8 -NSABP demonstrate high discharge capacities of 1.67 mAh cm-2 per cycle and long cycle lives of 330 h. Large-scale flexible rechargeable Zn-air pouch cells exhibit total capacities of 1.03 Ah and energy densities of 246 Wh kgcell -1 . This study provides new information about hydrogels with high ionic conductivities and water uptakes and should facilitate the application of FZABs in wearable electronics.