Narrowband Pure Near-Infrared (NIR) Ir(III) Complexes for Solution-Processed Organic Light-Emitting Diode (OLED) with External Quantum Efficiency Over 16 .

Highly efficient near-infrared (NIR) emitters have significant applications in medical and optoelectronic fields, but the development stays a great challenge due to the energy gap law. Here, we report two NIR phosphorescent Ir(III) complexes which display emission peaks around 730 nm with a narrow full width at half maximum of only 43 nm. Therefore, pure NIR luminescence can be obtained without having a very long emission wavelength, thus alleviating the restriction of the energy gap law, and obtaining impressively high photoluminescence quantum yield up to 0.70. More importantly, the pure NIR organic light-emitting diode (OLED) fabricated by the solution-processed mothed shows outstanding device performance with the highest external quantum efficiency of 16.43 %, which sets a new record for solution-processed NIR-OLEDs based on different emitters. This work sheds light on the development of Ir(III) complexes with narrowband emissions as highly efficient pure NIR-emitters.

Metal-Free, Acid/Phosphine-Induced Regioselective Thiolation of p-Quinone Methides with Sodium Aryl/Alkyl Sulfinates.

A simple and efficient method for the regioselective thiolation of p-quinone methides with sodium aryl/alkyl sulfinates has been established using an acid/phosphine-induced radical route under transition-metal-free conditions. A broad range of sodium aryl/alkyl sulfinates and p-quinone methides (p-QMs) are compatible for the reaction, giving the expected products with good to excellent yields. Control experiments were also performed to gain insights into the generation mechanism of thiyl radicals and hydrogen-atom transfer process. This protocol provides a safe and feasible way for the formation of carbon-sulfur bonds.

Silver-Catalyzed Regioselective Phosphorylation of para-Quinone Methides with P(III)-Nucleophiles.

A simple and efficient method for the silver-catalyzed regioselective phosphorylation of para-quinone methides (p-QMs) with P(III)-nucleophiles (P(OR)3, ArP(OR)2, Ar2P-OR) has been established via Michaelis-Arbuzov-type reaction. A broad range of P(III)-nucleophiles and para-quinone methides are well tolerated under the mild conditions, giving the expected diarylmethyl-substituted organophosphorus compounds with good to excellent yields. Moreover, a series of corresponding enantiomers can be obtained by employing dialkyl arylphosphonite (ArP(OR)2) as substrates. The control experiments and 31P NMR tracking experiments were also performed to gain insights for the plausible reaction mechanism. This protocol may have significant implications for the formation of C(sp3)-P bonds in Michaelis-Arbuzov-type reactions.

Metal-Free, N-Iodosuccinimide-Induced Regioselective Iodophosphoryloxylation of Alkenes with P(O)-OH Bonds.

A simple and efficient method for the regioselective iodophosphoryloxylation of alkenes with P(O)-OH bonds has been established by using NIS (N-iodosuccinimide) as the iodination reagent under transition-metal-free conditions. The present protocol is compatible with different functional groups, and suitable for various alkenes and P(O)-OH compounds. A variety of functionalized ß-iodo-1-ethyl phosphinic/phosphoric acid esters are obtained in good to excellent yields, which could be further transformed to diversified building blocks for the synthesis of bioactive compounds, pharmaceuticals and functional materials.

The third strategy: modulating emission colors of organic light-emitting diodes with UV light during the device fabrication process.

The modulation of emission color is one of the most critical topics in the research field of organic light-emitting diodes (OLEDs). Currently, only two ways are commonly used to tune the emission colors of OLEDs: one is to painstakingly synthesize different emitters with diverse molecular structures, the other is to precisely control the degree of aggregation or doping concentration of one emitter. To develop a simpler and less costly method, herein we demonstrate a new strategy in which the emission colors of OLEDs can be continuously changed with UV light during the device fabrication process. The proof of concept is established by a chromene-based Ir(iii) complex, which shows bright green emission and yellow emission before and after UV irradiation, respectively. Consequently, under different durations of UV irradiation, the resulting Ir(iii) complex is successfully used as the emitter to gradually tune the emission colors of related solution-processed OLEDs from green to yellow. Furthermore, the electroluminescent efficiencies of these devices are unaffected or even increased during this process. Therefore, this work demonstrates a distinctive point of view and approach for modulating the emission colors of OLEDs, which may prove great inspiration for the fabrication of multi-colored OLEDs with only one emitter.

Catalyst- and Additive-free, Regioselective 1,6-Hydroarylation of para-Quinone Methides with Anilines in HFIP.

A simple and efficient method for the synthesis of diarylmethyl-functionalized anilines through the hexafluoroisopropanol (HFIP)-mediated regioselective 1,6-hydroarylation reaction of para-quinone methides (p-QMs) with anilines under catalyst- and additive-free conditions is reported. Various kinds of p-QMs and amines (e. g. primary, secondary and tertiary amines) are well tolerated in this transformation without the pre-protection of amino group, and the corresponding products could be generated with good to excellent yields and satisfactory regioselectivity under the optimized reaction conditions. In addition to adaptable amine compounds, indoles and their derivatives are also compatible with this reaction system. This transformation can be easily extended to a gram scale-synthesis level to synthesize the target product. Furthermore, it is worth noting that some complex small aniline molecules with biological activity can be selectively modified using this method. The possible reaction mechanism is proposed through the step-by-step control experiments and DFT calculations, showing that the key process for achieving the regioselective 1,6-hydroarylation of p-QMs is the hydrogen bonding effect of HFIP to substrates.

Recent Progress in the Selective Functionalization of P(O)-OH Bonds.

As we all know, organic phosphorus compounds have high application values in chemical industries. Compared with traditional compounds with P-X (X = Cl, Br, I) and P-H bonds, phosphorylation reagents containing P(O)-OH bonds are stable, environmentally friendly, and inexpensive. However, in recent years, there have been few studies on the selective functionalization of P(O)-OH bonds for the fabrication of P-C and P-Z bonds. In general, four-coordinated P(O)-OH compounds have reached coordination saturation due to the phosphorus atom center, but cannot evolve the phosphorus coordination center through intra-molecular tautomerization; however, the weak coordination effects between the P=O bond and transition metals can be utilized to activate P(O)-OH bonds. This review highlights the most important recent contributions toward the selective functionalization of P(O)-OH bonds via cyclization/cross coupling/esterification reactions using transition metals or small organic molecules as the catalyst.