Oxygen-evolving catalytic atoms on metal carbides.

Single-atom catalysts have shown promising performance in various catalytic reactions. Catalytic metal sites supported on oxides or carbonaceous materials are usually strongly coordinated by oxygen or heteroatoms, which naturally affects their electronic environment and consequently their catalytic activity. Here, we reveal the stabilization of single-atom catalysts on tungsten carbides without the aid of heteroatom coordination for efficient catalysis of the oxygen evolution reaction (OER). Benefiting from the unique structure of tungsten carbides, the atomic FeNi catalytic sites are weakly bonded with the surface W and C atoms. The reported catalyst shows a low overpotential of 237 mV at 10 mA cm-2, which can even be lowered to 211 mV when the FeNi content is increased, a high turnover frequency value of 4.96 s-1 (η = 300 mV) and good stability (1,000 h). Density functional theory calculations show that either metallic Fe/Ni atoms or (hydro)oxide FeNi species are responsible for the high OER activity. We suggest that the application of inexpensive and durable WCx supports opens up a promising pathway to develop further single-atom catalysts for electrochemical catalytic reactions.

Protonated Imine-Linked Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution.

Covalent organic frameworks (COFs) have emerged as an important class of organic semiconductors and photocatalysts for the hydrogen evolution reaction (HER)from water. To optimize their photocatalytic activity, typically the organic moieties constituting the frameworks are considered and the most suitable combinations of them are searched for. However, the effect of the covalent linkage between these moieties on the photocatalytic performance has rarely been studied. Herein, we demonstrate that donor-acceptor (D-A) type imine-linked COFs can produce hydrogen with a rate as high as 20.7 mmol g-1 h-1 under visible light irradiation, upon protonation of their imine linkages. A significant red-shift in light absorbance, largely improved charge separation efficiency, and an increase in hydrophilicity triggered by protonation of the Schiff-base moieties in the imine-linked COFs, are responsible for the improved photocatalytic performance.

Immobilization of an Iridium Pincer Complex in a Microporous Polymer for Application in Room-Temperature Gas Phase Catalysis.

An iridium dihydride pincer complex [IrH2 (POCOP)] is immobilized in a hydroxy-functionalized microporous polymer network using the concepts of surface organometallic chemistry. The introduction of this novel, truly innocent support with remote OH-groups enables the formation of isolated active metal sites embedded in a chemically robust and highly inert environment. The catalyst maintained high porosity and without prior activation exhibited efficacy in the gas phase hydrogenation of ethene and propene at room temperature and low pressure. The catalyst can be recycled for at least four times.

0D/2D Heterojunctions of Vanadate Quantum Dots/Graphitic Carbon Nitride Nanosheets for Enhanced Visible-Light-Driven Photocatalysis.

0D/2D heterojunctions, especially quantum dots (QDs)/nanosheets (NSs) have attracted significant attention for use of photoexcited electrons/holes due to their high charge mobility. Herein, unprecedent heterojunctions of vanadate (AgVO3 , BiVO4 , InVO4 and CuV2 O6 ) QDs/graphitic carbon nitride (g-C3 N4 ) NSs exhibiting multiple unique advances beyond traditional 0D/2D composites have been developed. The photoactive contribution, up-conversion absorption, and nitrogen coordinating sites of g-C3 N4 NSs, highly dispersed vanadate nanocrystals, as well as the strong coupling and band alignment between them lead to superior visible-light-driven photoelectrochemical (PEC) and photocatalytic performance, competing with the best reported photocatalysts. This work is expected to provide a new concept to construct multifunctional 0D/2D nanocomposites for a large variety of opto-electronic applications, not limited in photocatalysis.

Constitutional isomerism of the linkages in donor-acceptor covalent organic frameworks and its impact on photocatalysis.

When new covalent organic frameworks (COFs) are designed, the main efforts are typically focused on selecting specific building blocks with certain geometries and properties to control the structure and function of the final COFs. The nature of the linkage (imine, boroxine, vinyl, etc.) between these building blocks naturally also defines their properties. However, besides the linkage type, the orientation, i.e., the constitutional isomerism of these linkages, has rarely been considered so far as an essential aspect. In this work, three pairs of constitutionally isomeric imine-linked donor-acceptor (D-A) COFs are synthesized, which are different in the orientation of the imine bonds (D-C=N-A (DCNA) and D-N=C-A (DNCA)). The constitutional isomers show substantial differences in their photophysical properties and consequently in their photocatalytic performance. Indeed, all DCNA COFs show enhanced photocatalytic H2 evolution performance than the corresponding DNCA COFs. Besides the imine COFs shown here, it can be concluded that the proposed concept of constitutional isomerism of linkages in COFs is quite universal and should be considered when designing and tuning the properties of COFs.

Mesoporous WCx Films with NiO-Protected Surface: Highly Active Electrocatalysts for the Alkaline Oxygen Evolution Reaction.

Metal carbides are promising materials for electrocatalytic reactions such as water electrolysis. However, for application in catalysis for the oxygen evolution reaction (OER), protection against oxidative corrosion, a high surface area with facile electrolyte access, and control over the exposed active surface sites are highly desirable. This study concerns a new method for the synthesis of porous tungsten carbide films with template-controlled porosity that are surface-modified with thin layers of nickel oxide (NiO) to obtain active and stable OER catalysts. The method relies on the synthesis of soft-templated mesoporous tungsten oxide (mp. WOx ) films, a pseudomorphic transformation into mesoporous tungsten carbide (mp. WCx ), and a subsequent shape-conformal deposition of finely dispersed NiO species by atomic layer deposition (ALD). As theoretically predicted by density functional theory (DFT) calculations, the highly conductive carbide support promotes the conversion of Ni2+ into Ni3+ , leading to remarkably improved utilization of OER-active sites in alkaline medium. The obtained Ni mass-specific activity is about 280 times that of mesoporous NiOx (mp. NiOx ) films. The NiO-coated WCx catalyst achieves an outstanding mass-specific activity of 1989 A gNi -1 in a rotating-disc electrode (RDE) setup at 25 °C using 0.1 m KOH as the electrolyte.

Ultralight covalent organic framework/graphene aerogels with hierarchical porosity.

The fabrication of macroscopic objects from covalent organic frameworks (COFs) is challenging but of great significance to fully exploit their chemical functionality and porosity. Herein, COF/reduced graphene oxide (rGO) aerogels synthesized by a hydrothermal approach are presented. The COFs grow in situ along the surface of the 2D graphene sheets, which are stacked in a 3D fashion, forming an ultralight aerogel with a hierarchical porous structure after freeze-drying, which can be compressed and expanded several times without breaking. The COF/rGO aerogels show excellent absorption capacity (uptake of >200 g organic solvent/g aerogel), which can be used for removal of various organic liquids from water. Moreover, as active material of supercapacitor devices, the aerogel delivers a high capacitance of 269 F g-1 at 0.5 A g-1 and cycling stability over 5000 cycles.

Cobalt-Exchanged Poly(Heptazine Imides) as Transition Metal-Nx Electrocatalysts for the Oxygen Evolution Reaction.

Poly(heptazine imides) hosting cobalt ions as countercations are presented as promising electrocatalysts for the oxygen evolution reaction (OER). A facile mixed-salt melt-assisted condensation is developed to prepare such cobalt poly(heptazine imides) (PHI-Co). The Co ions can be introduced in well-controlled amounts using this method, and are shown to be atomically dispersed within the imide-linked heptazine matrix. When applied to electrocatalytic OER, PHI-Co shows a remarkable activity with an overpotential of 324 mV and Tafel slope of 44 mV dec-1 in 1 m KOH.

Donor-acceptor covalent organic frameworks for visible light induced free radical polymerization.

Covalent organic frameworks (COFs) are promising materials for applications in photocatalysis, due to their conjugated, porous and chemically stable architectures. Alternating electron donor-acceptor-type structures are known to enhance charge carrier transport mobility and stability in polymers and are therefore also interesting building units for COFs used as photocatalysts but also as photoinitiator. In this work, two donor-acceptor COFs using electron deficient 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline and electron rich thiophene-based thieno[3,2-b]thiophene-2,5-dicarbaldehyde or [2,2'-bithiophene]-5,5'-dicarbaldehyde linkers are presented. The resulting crystalline and porous COFs have been applied as photoinitiator for visible light induced free radical polymerization of methyl methacrylate (MMA) to poly-methyl methacrylate (PMMA). These results pave the way to the development of robust and heterogeneous systems for photochemistry that offers the transfer of radicals induced by visible light.