Color-by-blue display using blue quantum dot light-emitting diodes and green/red color converting phosphors.

We report a novel full-color display based on the generation of full-color by a highly efficient blue QD-LED light approach, or so called color-by-blue QD-LED display. This newly proposed color-by-blue QD-LED display combines a blue CdZnS/ZnS QD-LED blue subpixel and excitation source with front-emitting green/red phosphor subpixels. It is carefully estimated that the detailed display characteristics as well as full color-conversion and reasonable device efficiency of blue, green, and red satisfy the minimum requirements for display application. Also, we would like to emphasize that the proposed blue, green, and red device shows maximum luminance of 1570, 12920, and 3120 cd/m², respectively, luminous efficiency of 1.5, 12.1, and 2.5 cd/A, respectively, and external quantum efficiency of 6.8, 2.8, and 2.0%, respectively. It is expected that full color generation by color-by-blue QD-LED will lead to further technological advancements in the area of efficient and facile display applications.

Stable and Efficient Green Perovskite Nanocrystal-Polysilazane Films for White LEDs Using an Electrospray Deposition Process.

We successfully fabricated a stable, efficient, and easy-to-use CsPbBr3 perovskite nanocrystal (PeNC)-embedded inorganic polymer film through an encapsulation step with a Si-N/Si-O-based polysilazane (PSZ) matrix via the electrospray (e-spray) deposition of a silazane (SZ) oligomer-decorated PeNC solution. To eliminate Pb2+ defect sites that are generated when the ligands are peeled from the PeNC surface, surface passivation of the Lewis acid/base adduct is possible by coupling the SZ oligomer (the donor of lone pairs) with Pb2+ sites (the acceptor of lone pairs). With the addition of the SZ oligomer, the photoluminescence quantum yield of photodegraded CsPbBr3 PeNC was recovered and increased by 2.35-fold whereas the stability was improved significantly from an untreated CsPbBr3 PeNC solution. During the e-spray deposition process, SZ-treated CsPbBr3 PeNC solution droplets can react with atmospheric moisture to polymerize and form a Si-N/Si-O network encapsulant via a sol-gel reaction. The resultant CsPbBr3-PSZ films showed improved stability levels under most environmental conditions, including air storage, blue light exposure, UV exposure, thermal exposure, and water immersion. The optimum CsPbBr3-PSZ film-covered blue light-emitting diode (LED) showed good performance capabilities, with a luminous efficacy (LE) of 85.9 lm/W and color-by-blue conversion efficiency (CE) of 60.1%. Furthermore, this easy-to-use CsPbBr3-PSZ film can be employed to realize a remote-type white-by-blue LED by combining it with red emissive K2SiF6:Mn4+/silicone film. The LE and CE rates of the white LED were 71.0 lm/W and 50.8%, respectively, at a correlated color temperature of 9334 K, with only an 8% drop in the LE for long-term operation of 100 h. This result indicates that e-spray deposition is a simple fabrication process by which to create stable and efficient PeNC films from an unstable PeNC solution using a rapid sol-gel reaction between droplets and moisture from the air.

RGB-Colored Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells with Minimal Efficiency Loss Using Narrow-Bandwidth Stopband Nano-Multilayered Filters.

Colorful Cu(In,Ga)(S,Se)2 (CIGSSe) thin-film solar cells were achieved by integrating a narrow-bandwidth stopband filter (NBSF) on a CIGSSe cell. The full range of visible color of NBSF could be realized by depositing one-dimensional nano-multilayers of alternating high-index (Al2O3) and low-index (SiO2) films while controlling the thickness of each layer and the number of stacked layers. Particularly, high-purity red, green, and blue (RGB) colors were generated on black CIGSSe cells with minimal harvest efficiency drop, showing power conversion efficiency (PCE) losses for the red and green CIGSSe cells of 4.2 and 1.2%, respectively, with no reduction in the PCE of the blue CIGSSe cell. The minimal drop in the harvest efficiency was attributed to the antireflection effect of the NBSF and the low overlap between the reflectance spectrum of NBSFs with a narrow stopband and the absorption spectrum of CIGSSe. The esthetic value could be further enhanced through the color variation of the RGB NBSF with viewing angle, so-called pearl-like colors. The synergetic effect of minimal efficiency loss, full color realization, and the pearl-like color change of the newly developed NBSFs can make CIGSSe cells applicable to building-integrated photovoltaics.

Efficient and Stable CsPbBr3 Quantum-Dot Powders Passivated and Encapsulated with a Mixed Silicon Nitride and Silicon Oxide Inorganic Polymer Matrix.

Despite the excellent optical features of fully inorganic cesium lead halide (CsPbX3) perovskite quantum dots (PeQDs), their unstable nature has limited their use in various optoelectronic devices. To mitigate the instability issues of PeQDs, we demonstrate the roles of dual-silicon nitride and silicon oxide ligands of the polysilazane (PSZ) inorganic polymer to passivate the surface defects and form a barrier layer coated onto green CsPbBr3 QDs to maintain the high photoluminescence quantum yield (PLQY) and improve the environmental stability. The mixed SiN x/SiN xO y/SiO y passivated and encapsulated CsPbBr3/PSZ core/shell composite can be prepared by a simple hydrolysis reaction involving the addition of adding PSZ as a precursor and a slight amount of water into a colloidal CsPbBr3 QD solution. The degree of the moisture-induced hydrolysis reaction of PSZ can affect the compositional ratio of SiN x, SiN xO y, and SiO y liganded to the surfaces of the CsPbBr3 QDs to optimize the PLQY and the stability of CsPbBr3/PSZ core/shell composite, which shows a high PLQY (∼81.7%) with improved thermal, photo, air, and humidity stability as well under coarse conditions where the performance of CsPbBr3 QDs typically deteriorate. To evaluate the suitability of the application of the CsPbBr3/PSZ powder to down-converted white-light-emitting diodes (DC-WLEDs) as the backlight of a liquid crystal display (LCD), we fabricated an on-package type of tricolor-WLED by mixing the as-synthesized green CsPbBr3/PSZ composite powder with red K2SiF6:Mn4+ phosphor powder and a poly(methyl methacrylate)-encapsulating binder and coating this mixed paste onto a cup-type blue LED. The fabricated WLED show high luminous efficacy of 138.6 lm/W (EQE = 51.4%) and a wide color gamut of 128% and 111% without and with color filters, respectively, at a correlated color temperature of 6762 K.

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix.

We introduce a low-melting-point (MP) Sn-P-F-O glass ceramic material into the phosphor-in-glass (PIG) material to realize an 'on-chip' chip-on-board (COB) type of phosphor-converted (pc) white light-emitting diode (WLED) with green (BaSr)2SiO4:Eu2+ and red (SrCa)AlSiN3:Eu2+ (SCASN) phosphors. The optimum Sn-P-F-O-based ceramic components can be sintered into the glass phase with a facile one-step heating process at 285 °C for 1 min. Specifically, these soft-fabrication conditions can be optimized to minimize the degradation of the luminescent properties of the red SCASN phosphor as well as the green silicate phosphor in PIG-based white COB-type pc-LEDs owing to the low thermal loss of the phosphors at low fabrication temperatures below 300 °C. Moreover, the constituents of the COB package, in this case the wire bonding and plastic exterior, can be preserved simultaneously from thermal damage. That is, the low sintering temperature of the glass ceramic encapsulant is a very important factor to realize excellent optical qualities of white COB LEDs. The optical performances of low-MP Sn-P-F-O-based PIG on-chip COB-type pc-WLEDs exhibit low yellowing phenomena, good luminous efficacy of 70.9-86.0 lm/W, excellent color rendering index of 94-97 with correlated color temperatures from 2700 to 10000 K, and good long-term stability.

Circadian-tunable Perovskite Quantum Dot-based Down-Converted Multi-Package White LED with a Color Fidelity Index over 90.

New metrics of the color and circadian performances of down-converted white light-emitting diodes (DC-WLEDs) are rapidly becoming popular in smart lighting systems. This is due to the increased desire for accurate analytical methods to measure the effects of newly developed quantum dot (QD)-based lighting on the vision, color, and circadian sensors of retina cells in the human eye. In this regard, a two-measure system known as technical memorandum TM-30-2015 (Illuminating Engineering Society of North America), encompassing the color fidelity index (CFI, R f ) and the color gamut index (CGI, R g ), has been developed as a new metrics of color to replace the currently utilized color rendering index (CRI, R a ). In addition, the tunability of the circadian efficacy of radiation (CER) is now more important due to its effect on the control of melatonin suppression/secretion, resetting of the central/local clocks of individuals given their daily cycles, and benefits to human health. In this paper, we developed and analyzed six-colored perovskite (Pe; cyan, green, yellowish green, amber, orange, and red colors) QDs-based multi-package WLED, and optimized the SPDs of tunable PeQD-based multi-package WLEDs in terms of promising human-centric lighting device, given its optimized visual energy, color qualities and health-promoting effects.

Origin of highly efficient photoluminescence in AgIn5S8 nanoparticles.

The photoluminescence of AgIn5S8 nanoparticles was examined to clarify the emissive relaxation processes of defect states and to explain the highly efficient photoluminescence of defect states. The large Stokes shift of the defect emission was explained by strong electron-phonon coupling in the nanoparticles. Steady-state and time-resolved photoluminescence spectroscopy indicated two emissive defect states with characteristic emission energies and lifetimes. Change of the surface-to-volume ratio in the nanoparticles affected the relative contribution of the two states, implying that defect emission in higher energy was attributable to surface-related defects. The defect emission in lower energy was attributable to intrinsic defects, which were also present in bulk. The quantum yield of the surface defects was larger than that of the intrinsic defects, which accounted for the unusually high quantum yield of AgIn5S8 nanoparticles, although the origin of emission was the defect states, not the exciton recombination found in typical semiconductor nanoparticles.

Multiple-Color-Generating Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells via Dichroic Film Incorporation for Power-Generating Window Applications.

There are four prerequisites when applying all types of thin-film solar cells to power-generating window photovoltaics (PVs): high power-generation efficiency, longevity and high durability, semitransparency or partial-light transmittance, and colorful and aesthetic value. Solid-type thin-film Cu(In,Ga)S2 (CIGS) or Cu(In,Ga)(S,Se)2 (CIGSSe) PVs nearly meet the first two criteria, making them promising candidates for power-generating window applications if they can transmit light to some degree and generate color with good aesthetic value. In this study, the mechanical scribing process removes 10% of the window CIGSSe thin-film solar cell with vacant line patterns to provide a partial-light-transmitting CIGSSe PV module to meet the third requirement. The last concept of creating distinct colors could be met by the addition of reflectance colors of one-dimensional (1D) photonic crystal (PC) dichroic film on the black part of a partial-light-transmitting CIGSSe PV module. Beautiful violets and blues were created on the cover glass of a black CIGSSe PV module via the addition of 1D PC blue-mirror-yellow-pass dichroic film to improve the aesthetic value of the outside appearance. As a general result from the low external quantum efficiency (EQE) and absorption of CIGSSe PVs below a wavelength of 400 nm, the harvesting efficiency and short-circuit photocurrent of CIGSSe PVs were reduced by only ∼10% without reducing the open-circuit voltage (VOC) because of the reduced overlap between the absorption spectrum of CIGSSe PV and the reflectance spectrum of the 1D PC blue-mirror-yellow-pass dichroic film. The combined technology of partial-vacancy-scribed CIGSSe PV modules and blue 1D PC dichroic film can provide a simple strategy to be applied to violet/blue power-generating window applications, as such a strategy can improve the transparency and aesthetic value without significantly sacrificing the harvesting efficiency of the CIGSSe PV modules.

Study of Perovskite QD Down-Converted LEDs and Six-Color White LEDs for Future Displays with Excellent Color Performance.

A narrow-emitting red, green, and blue (RGB) perovskite quantum dot (PeQD)-based tricolored display system can widen the color gamut over the National Television System Committee (NTSC) to 120%, but this value is misleading with regard to the color perception of cyan and yellow reproduced in the narrow RGB spectra. We propose that a PeQD-based six-color display system can reproduce true-to-life spectral distributions with high fidelity, widen the color gamut, and close the cyan and yellow gap in the RGB tricolored display by adding cyan (Cy), yellowish green (Yg), and orange colors (Or). In this study, we demonstrated pure-colored CsPbX3 (X = Cl, Br, I, or their halide mixtures; Cl/Br and Br/I) PeQD-based monochromatic down-converted light-emitting diodes (DC-LED) for the first time, and we incorporated PeQDs with UV-curable binders and long-wavelength-pass-dichroic filters (LPDFs). CsPbX3 PeQD-based pure Cy-, G-, Yg-, Or-, R-emitting monochromatic DC-LED provide luminous efficacy (LE) values of 81, 184, 79, 80, and 35 lm/W, respectively, at 20 mA. We also confirmed the suitability and the possibility of access to future color-by-blue backlights for field-sequential-color liquid crystal displays, using six-color multipackage white LEDs, as well as future six-colored light-emitting devices with high vision and color performance. The fabricated six-color multipackage white LEDs exhibited an appropriate LE (62 lm/W at total 120 mA), excellent color qualities (color rendering index (CRI) = 96, special CRI for red (R9) = 97) at a correlated color temperature (CCT) of 6500 K, and a wide color gamut covering the NTSC up to 145% in the 1931 Commission International de l'Eclairage (CIE) color coordinates space.

Synthesis and characterization of green Zn-Ag-In-S and red Zn-Cu-In-S quantum dots for ultrahigh color quality of down-converted white LEDs.

Eco-friendly green Zn-Ag-In-S (ZAIS) and red Zn-Cu-In-S (ZCIS) core/shell-like alloyed quantum dots (QDs) have been synthesized by a facile hot-injection method with a multiple injection approach. Broad full-width at half-maximum (fwhm) of the photoluminescence (PL) emission and tunability of the green ZAIS and red ZCIS QDs were obtained by adopting a low-temperature core growth and high-temperature multiple alloyed reaction. The alloyed green ZAIS and red ZCIS QDs reached PL quantum yields as high as 0.61 and 0.53; fwhm of the PL peaks were as wide as 81 and 106 nm, respectively. This demonstrates the practical realization of white down-converted light-emitting diodes (DC-LEDs), fully covering the whole visible wavelength range and the cyan gap, using two broad fwhm green ZAIS and red ZCIS QDs. We also characterized the vision and color performance using luminous efficacy (LE), color rendering index (CRI), special CRI for strong red (R9), and color quality scale (CQS) of white DC-LEDs incorporated with green ZAIS and red ZCIS QDs at the correlated color temperature (CCT) range of 2700-10 000 K. The tricolor white DC-LED using broad fwhm green-emitting ZAIS and red-emitting ZCIS core/shell-like alloyed QDs exhibits a moderate LE (31.2 lm/W) and ultrahigh color qualities (CRI = 97, R9 = 97, and CQS = 94) with warm white at a CCT of 3500 K.