RESUMO
2D Ti3C2Tx MXene-based film electrodes with metallic conductivity and high pseudo-capacitance are of considerable interest in cutting-edge research of capacitive deionization (CDI). Further advancement in practical use is however impeded by their intrinsic limitations, e.g., tortuous ion diffusion pathway of layered stacking, vulnerable chemical stability, and swelling-prone nature of hydrophilic MXene nanosheet in aqueous environment. Herein, a nanoporous 2D/2D heterostructure strategy is established to leverage both merits of holey MXene (HMX) and holey graphene oxide (HGO) nanosheets, which optimize ion transport shortcuts, alleviate common restacking issues, and improve film's mechanical and chemical stability. In this design, the nanosized in-plane holes in both handpicked building blocks build up ion diffusion shortcuts in the composite laminates to accelerate the transport and storage of ions. As a direct outcome, the HMX/rHGO films exhibit remarkable desalination capacity of 57.91 mg g-1 and long-term stability in 500 mg L-1 NaCl solution at 1.2 V. Moreover, molecular dynamics simulations and ex situ wide angle X-ray scattering jointly demonstrate that the conductive 2D/2D networks and ultra-short ion diffusion channels play critical roles in the ion intercalation/deintercalation process of HMX/rHGO films. The study paves an alternative design concept of freestanding CDI electrodes with superior ion transport efficiency.
RESUMO
Gastrointestinal stromal tumor (GIST) is the most common mesenchymal tumor of the alimentary tract. The prognosis depends on the primary site, and small intestinal GISTs have a worse prognosis than gastric GISTs. Molecularly targeted drugs to inhibit tyrosine kinase activity of KIT were used for unresectable or recurrent GISTs. However, secondary resistance to the drugs is often acquired, and treatments based on other mechanisms are needed. Previously, we reported that cell adhesion molecule 1 (CADM1) was highly expressed in most of small intestinal GISTs but not in most of gastric GISTs. In the present study, we examined whether the antibody-drug conjugate (ADC) with anti-CADM1 antibody and monomethyl auristatin E (anti-CAD-ADC) shows anti-tumor effect on CADM1-expressing human GIST cells. The ADC adhibited in this study was previously used for CADM1-expressing human mesothelioma cells and showed anti-tumor effect for them in vitro. GIST-T1 cell line of gastric origin which scarcely expresses CADM1 and GIST-T1 cells transfected with CADM1 cDNA (GIST-T1-CAD cells) which highly expresses CADM1 and represents small intestinal GIST were used. In vitro, anti-CAD-ADC showed remarkable cytotoxic activity on GIST-T1-CAD cells, but control ADC did not. Both anti-CAD-ADC and control ADC did not show anti-tumor effect on original GIST-T1 cells. When GIST-T1-CAD cells were subcutaneously injected to the nude mice, intravenous administration of anti-CAD-ADC showed inhibitory effect for tumor enlargement. Tumor of GIST-T1 cells grew even after anti-CAD-ADC injection. When GIST-T1-CAD cells were injected into peritoneal cavity of the SCID mice, intraperitoneal administration of anti-CAD-ADC showed reduction of the peritoneal tumor. On the other hand, peritoneal tumor grew after control ADC administration. Tissue and organ damage due to administration of anti-CAD-ADC was not apparent by macroscopic and histological examinations in mice. These results indicate that anti-CAD-ADC could have apparent anti-tumor effect on CADM1-expressing human GIST cells both in in vitro and in vivo mouse models.
RESUMO
Layer-stacking behaviors are crucial for two-dimensional covalent organic frameworks (2D COFs) to define their pore structure, physicochemical properties, and functional output. So far, fine control over the stacking mode without complex procedures remains a grand challenge. Herein, we proposed a "key-cylinder lock mimic" strategy to synthesize 2D COFs with a tunable layer-stacking mode by taking advantage of ionic liquids (ILs). The staggered (AB) stacking (unlocked) COFs were exclusively obtained by incorporating ILs of symmetric polarity and matching molecular size; otherwise, commonly reported eclipsed (AA) stacking (locked) COFs were observed instead. Mechanistic study revealed that AB stacking was induced by a confined interlocking effect (CIE) brought by anions and bulky cations of the ILs inside pores ("key" and "cylinder", respectively). Excitingly, this strategy can speed up production rate of crystalline powders (e.g., COF-TAPT-Tf@BmimTf2N in merely 30 minutes) under mild reaction conditions. This work highlights the enabling role of ILs to tailor the layer stacking of 2D COFs and promotes further exploration of their stacking mode-dependant applications.
RESUMO
ConspectusDiscovering and constructing molecular functionality platforms for materials chemistry innovation has been a persistent target in the fields of chemistry, materials, and engineering. Around this task, basic scientific questions can be asked, novel functional materials can be synthesized, and efficient system functionality can be established. Poly(ionic liquid)s (PILs) have attracted growing interest far beyond polymer science and are now considered an interdisciplinary crossing point between multiple research areas due to their designable chemical structure, intriguing physicochemical properties, and broad and diverse applications. Recently, we discovered that 1,2,4-triazolium-type PILs show enhanced performance profiles, which are due to stronger and more abundant supramolecular interactions ranging from hydrogen bonding to metal coordination, when compared with structurally similar imidazolium counterparts. This phenomenon in our view can be related to the smart hydrogen atoms (SHAs), that is, any proton that binds to the carbon in the N-heterocyclic cations of 1,2,4-triazolium-type PILs. The replacement of one carbon by an electron-withdrawing nitrogen atom in the broadly studied heterocyclic imidazolium ring will further polarize the C-H bond (especially for C5-H) of the resultant 1,2,4-triazolium cation and establish new chemical tools for materials design. For instance, the H-bond-donating strength of the SHA, as well as its BroÌ·nsted acidity, is increased. Furthermore, polycarbene complexes can be readily formed even in the presence of weak or medium bases, which is by contrast rather challenging for imidazolium-type PILs. The combination of SHAs with the intrinsic features of heterocyclic cation-functionalized PILs (e.g., N-coordination capability and polymeric multibinding effects) enables new phenomena and therefore innovative materials applications.In this Account, recent progress on SHAs is presented. SHA-related applications in several research branches are highlighted together with the corresponding materials design at size scales ranging from nano- to micro- and macroscopic levels. At a nanoscopic level, it is possible to manipulate the interior and outer shapes and surface properties of PIL nanocolloids by adjusting the hydrogen bonds (H-bonds) between SHAs and water. Owing to the interplay of polycarbene structure, N-coordination, and the polymer multidentate binding of 1,2,4-triazolium-type PILs, metal clusters with controllable size at sub-nanometer scale were successfully synthesized and stabilized, which exhibited record-high catalytic performance in H2 generation via methanolysis of ammonia borane. At the microscopic level, SHAs are found to efficiently catalyze single crystal formation of structurally complex organics. Free protons in situ released from the SHAs serve as organocatalysts to activate formation of C-N bonds at room temperature in a series of imine-linked crystalline porous organics, such as organic cages, macrocycles and covalent organic frameworks; meanwhile the concurrent "salting-out" effect of PILs as polymers in solution accelerated the crystallization rate of product molecules by at least 1 order of magnitude. At the macroscopic scale, by finely regulating the supramolecular interactions of SHAs, a series of functional supramolecular porous polyelectrolyte membranes (SPPMs) with switchable pores and gradient cross-sectional structures were manufactured. These membranes demonstrate impressive figures of merit, ranging from chiral separation and proton recognition to switchable optical properties and real-time chemical reaction monitoring. Although the concept of SHAs is in the incipient stage of development, our successful examples of applications portend bright prospects for materials chemistry innovation.
RESUMO
Lithium-sulfur (Li-S) battery features a high theoretical energy density, but the shuttle of soluble polysulfides between the two electrodes often results in a rapid capacity decay. Herein, a straightforward electrostatic adsorption strategy based on a cross-linked polyimidazolium separator as a snaring shield of polysulfides is reported, which suppresses the undesirable migration of polysulfides to the anode. The porous ionic network (PIN)-modified carbon nanotubes (CNTs) are successfully prepared and coated onto a commercial porous polypropylene membrane in a vacuum-filtration step. The favorable affinity of the imidazolium ring toward polysulfide via the polar interaction and the electrostatic effect of ions mitigates the undesirable shuttle of polysulfides in the electrolyte, improving the LiâS battery in terms of rate performance and cycling life. Compared to the reference PIN-free CNT-coated separator, the PIN/CNT-coated one has an increased initial capacity of 1.3 folds (up to 1394.8 mAh g-1 for PIN/CNT/PP-3) at 0.1 C.
Assuntos
Lítio , Nanotubos de Carbono , Porosidade , Íons , EnxofreRESUMO
Approximately 40 families with multiple gastrointestinal stromal tumors (GISTs) and germline c-kit gene mutations have been reported. Three knock-in mouse models have been generated, and all the models showed a cecal GIST. In the present study, we established a cell line derived from cecal GIST in a familial GIST model mouse with KIT-Asp818Tyr. Since the established cells showed spindle-shaped morphology with atypical nuclei, and since immunohistochemistry revealed that they were positive for α-SMA but negative for KIT, CD34 and desmin, the phenotypes of the cells were reminiscent of dedifferentiated GIST-like ones but not the usual GIST-like ones. Gene expression analysis showed that the cell line, designated as DeGISTL1 cell, did not express c-kit gene apparently, but highly expressed HSP90 families and glutaminase 1. Pathway analysis of the cells revealed that metabolic pathway might promote their survival and growth. Pimitespib, a heat shock protein 90α/ß inhibitor, and Telaglenastat, a selective glutaminase 1 inhibitor, inhibited proliferation of DeGISTL1 cells and the combination of these showed an additive effect. DeGISTL1 cells might be a good model of dedifferentiated GISTs, and combination of Pimitespib and Telaglenastat could be a possible candidate for treatment strategy for them.
Assuntos
Antineoplásicos , Tumores do Estroma Gastrointestinal , Camundongos , Animais , Tumores do Estroma Gastrointestinal/patologia , Glutaminase/genética , Glutaminase/uso terapêutico , Antineoplásicos/uso terapêutico , Mutação em Linhagem Germinativa , Linhagem Celular , Proteínas Proto-Oncogênicas c-kit/genéticaRESUMO
Constructing photocatalyst systems to functionalize the inert C-H bonds has attracted extensive research interest. However, purposeful modulation of interfacial charge transfer in heterostructures remains a challenge, as it usually suffers from sluggish kinetics. Reported herein is an easy strategy to construct the heteroatom-induced interface for developing the titanium-organic frameworks (MOF-902) @ thiophene-based covalent triazine frameworks (CTF-Th) nanosheets S-scheme heterojunctions with controllable oxygen vacancies (OVs). Specifically, Ti atoms were first anchored onto the heteroatom site of CTF-Th nanosheets, and then grown into MOF-902 via an interfacial Ti-S linkage, generating OVs. Using in situ X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) calculations, the enhanced interfacial charge separation and transfer induced by moderate OVs in the pre-designed S-scheme nanosheets was validated. The heterostructures exhibited an improved efficiency in photocatalytic C3-acylation of indoles under mild conditions with a yield 8.2â times larger than pristine CTF-Th or MOF-902 and enabled an extended scope of substrates (15â examples). This performance is superior to state-of-the-art photocatalyst and can be retained, without significant loss, after 12â consecutive cycles.
RESUMO
Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.
RESUMO
Heteroatom-doped porous carbon materials (HPCMs) have found extensive applications in adsorption/separation, organic catalysis, sensing, and energy conversion/storage. The judicious choice of carbon precursors is crucial for the manufacture of HPCMs with specific usages and maximization of their functions. In this regard, polymers as precursors have demonstrated great promise because of their versatile molecular and nanoscale structures, modulatable chemical composition, and rich processing techniques to generate textures that, in combination with proper solid-state chemistry, can be maintained throughout carbonization. This Review comprehensively surveys the progress in polymer-derived functional HPCMs in terms of how to produce and control their porosities, heteroatom doping effects, and morphologies and their related use. First, we summarize and discuss synthetic approaches, including hard and soft templating methods as well as direct synthesis strategies employing polymers to control the pores and/or heteroatoms in HPCMs. Second, we summarize the heteroatom doping effects on the thermal stability, electronic and optical properties, and surface chemistry of HPCMs. Specifically, the heteroatom doping effect, which involves both single-type heteroatom doping and codoping of two or more types of heteroatoms into the carbon network, is discussed. Considering the significance of the morphologies of HPCMs in their application spectrum, potential choices of suitable polymeric precursors and strategies to precisely regulate the morphologies of HPCMs are presented. Finally, we provide our perspective on how to predefine the structures of HPCMs by using polymers to realize their potential applications in the current fields of energy generation/conversion and environmental remediation. We believe that these analyses and deductions are valuable for a systematic understanding of polymer-derived carbon materials and will serve as a source of inspiration for the design of future HPCMs.
RESUMO
Although considerable efforts have been devoted to novel ionic porous networks (IPNs), the development of them in a scalable manner to tackle the issues in pollutant treatment by adsorption remains an imminent challenge. Herein, inspired by natural spider webs, a knitting copolymerization strategy is proposed to construct analogue triazolium salt-based porous networks (IPN-CSUs). It is not only convenient to incorporate the cationic motifs into the network, but easy to control over the contents of ionic pairs. The as-prepared IPN-CSUs displays a high surface area of 924 m2 g-1 , a large pore volume of 1.27 cm3 g-1 and abundant ionic sites, thereby exhibiting fast adsorption rate and high adsorption capacity towards organic and inorganic pollutants. The kinetics and thermodynamics study reveal that the adsorption followed a pseudo-second-order kinetic model and Langmuir isotherm model correspondingly. Specifically, the maximum adsorption capacity of the IPN-CSUs is as high as 1.82 mg mg- 1 for permanganate ions and up to 0.54 mg mg-1 for methyl orange, which stands out among the previously reported porous adsorbents so far. It is expected that the strategy reported herein can be extended to the development of other potential efficient adsorbents in water purifications.
Assuntos
Corantes , Poluentes Químicos da Água , Adsorção , Ânions , Cinética , Porosidade , SaisRESUMO
Two-dimensional (2D) MXene-based lamellar membranes bearing interlayers of tunable hydrophilicity are promising for high-performance water purification. The current challenge lies in how to engineer the pore wall's surface properties in the subnano-confinement environment while ensuring its high selectivity. Herein, poly(ionic liquid)s, equipped with readily exchangeable counter anions, succeeded as a hydrophilicity modifier in addressing this issue. Lamellar membranes bearing nanochannels of tailorable hydrophilicity are constructed via assembly of poly(ionic liquid)-armored MXene nanosheets. By shifting the interlayer galleries from being hydrophilic to more hydrophobic via simple anion exchange, the MXene membrane performs drastically better for both the permeance (by two-fold improvement) and rejection (≈99 %). This facile method opens up a new avenue for building 2D material-based membranes of enhancing molecular transport and sieving effect.
RESUMO
Three families with multiple gastrointestinal stromal tumors (GISTs) caused by a germline Asp820Tyr mutation at exon 17 of the c-kit gene (KIT-Asp820Tyr) have been reported. We previously generated a knock-in mouse model of the family, and the mice with KIT-Asp818Tyr corresponding to human KIT-Asp820Tyr showed a cecal tumor equivalent to human GIST. In the model mice, we reported that tyrosine kinase inhibitor, imatinib, could stabilize but not decrease the cecal tumor volume. In this report, we examined whether a heat shock protein 90 inhibitor, pimitespib (TAS-116), has an inhibitory effect on phosphorylation of KIT-Asp818Tyr and can decrease the cecal tumor volume in the model mice. First, we showed that pimitespib inhibited KIT phosphorylation both dose- and time-dependently in KIT-Asp818Tyr transfected murine Ba/F3 cells. Then, four 1-week courses of pimitespib were orally administered to heterozygous (KIT-Asp818Tyr/+) model mice. Each course consisted of once-daily administration for consecutive 5 days followed by 2 days-off. Cecal tumors were dissected, and tumor volume was histologically analyzed, Ki-67 labeling index was immunohistochemically examined, and apoptotic figures were counted. Compared to the vehicle treated mice, pimitespib administered mice showed statistically significantly smaller cecal tumor volume, lower Ki-67 labeling index, and higher number of apoptotic figures in 10 high power fields (P = 0.0344, P = 0.0019 and P = 0.0269, respectively). Western blotting revealed that activation of KIT signaling molecules was strongly inhibited in the tumor tissues of pimitespib-administered mice compared to control mice. Thus, pimitespib seemed to inhibit in vivo tumor progression effectively in the model mice. These results suggest that the progression of multiple GISTs in patients with germline KIT-Asp820Tyr might be controllable by pimitespib.
Assuntos
Antineoplásicos/farmacologia , Benzamidas/farmacologia , Tumores do Estroma Gastrointestinal/tratamento farmacológico , Proteínas Proto-Oncogênicas c-kit/genética , Pirazóis/farmacologia , Animais , Proliferação de Células/efeitos dos fármacos , Modelos Animais de Doenças , Tumores do Estroma Gastrointestinal/genética , Tumores do Estroma Gastrointestinal/patologia , Humanos , Mesilato de Imatinib/farmacologia , Camundongos , Mutação/efeitos dos fármacos , Fosforilação/efeitos dos fármacos , Proteínas Proto-Oncogênicas c-kit/antagonistas & inibidores , Transdução de Sinais/efeitos dos fármacosRESUMO
Herein, the fabrication of iron-containing porous polyelectrolyte membranes (PPMs) via ionic complexation between an imidazolium-based poly(ionic liquid) (PIL) and 1,1-ferrocenedicarboxylic acid is reported. The key parameters to control the microstructure of porous hybrid membranes are investigated in detail. Further aerobic pyrolysis of such porous hybrid membranes at 900 °C can transfer the ferrocene-containing PPMs into freestanding porous iron oxide films. This process points out a sacrificial template function of porous poly(ionic liquid) membranes in the fabrication of porous metal oxide films.
Assuntos
Líquidos Iônicos , Compostos Férricos , Membranas Artificiais , Metalocenos , PorosidadeRESUMO
In this communication, a one-step synthetic route is reported toward free-standing metal-nanoparticle-functionalized gradient porous polyelectrolyte membranes (PPMs). The membranes are produced by soaking a glass-plate-supported blend film that consists of a hydrophobic poly(ionic liquid) (PIL), poly(acrylic acid), and a metal salt, into an aqueous hydrazine solution. Upon diffusion of water and hydrazine molecules into the blend film, a phase separation process of the hydrophobic PIL and an ionic crosslinking reaction via interpolyelectrolyte complexation occur side by side to form the PPM. Simultaneously, due to the reductive nature of hydrazine, the metal salt inside the polymer blend film is reduced in situ by hydrazine into metal nanoparticles that anchor onto the PPM. The as-obtained hybrid porous membrane is proven functional in the catalytic reduction of p-nitrophenol. This one-step method to grow metal nanoparticles and gradient porous membranes can simplify future fabrication processes of multifunctional PPMs.
Assuntos
Líquidos Iônicos , Nanopartículas Metálicas , Hidrazinas , Polímeros , PorosidadeRESUMO
Methods of electrochemical analysis of biological objects based on the reaction of electro-oxidation/electro-reduction of molecules are presented. Polymer nanocomposite materials that modify electrodes to increase sensitivity of electrochemical events on the surface of electrodes are described. Examples of applications electrochemical biosensors constructed with nanocomposite material for detection of biological molecules are presented, advantages and drawbacks of different applications are discussed.
Assuntos
Técnicas Biossensoriais , Técnicas Eletroquímicas/métodos , DNA/análise , Nanocompostos , NanotubosRESUMO
Poly(ionic liquid)s (PILs), as an innovative class of polyelectrolytes, are composed of polymeric backbones with IL species in each repeating unit. The combined merits of the polymers and ILs make them promising materials for composites in materials science. Particularly, the integration of PILs with functional substances (PIL composites) opens up a new dimension in utilizing ionic polymers by offering novel properties and improved functions, which impacts multiple subfields of our chemical society. This review summarizes recent developments of PIL composites with a special emphasis on the preparation techniques that are based on the intrinsic properties of the PILs and the synergistic effects between the PILs and substances of interest for diverse applications.
RESUMO
We report that continuous MOF films with highly controlled thickness (from 44 to 5100â nm) can be deposited over length scales greater than 80â centimeters by a facile, fast, and cost-effective spray-coating method. Such success relies on our discovery of unprecedented perfectly dispersed colloidal solutions consisting of amorphous MOF nanoparticles, which we adopted as precursors that readily converted to the crystalline films upon low-temperature in situ heating. The colloidal solutions allow for the fabrication of compact and uniform MOF films on a great deal of substrates such as fluorine-doped tin oxide, glass, SiO2 , Al2 O3 , Si, Cu, and even flexible polycarbonate, widening their technological applications where substrates are essential. Despite the present work focuses on the fabrication of uniform cobalt-(2-methylimidazole)2 and zinc-(2-methylimidazole)2 films, our findings mark a great possibility in producing other high-quality MOF thin films on a large scale.
RESUMO
The rational design of catalytically active sites in porous materials is essential in electrocatalysis. Herein, atomically dispersed Fe-Nx sites supported by hierarchically porous carbon membranes are designed to electrocatalyze the hydrazine oxidation reaction (HzOR), one of the key techniques in electrochemical nitrogen transformation. The high intrinsic catalytic activity of the Fe-Nx single-atom catalyst together with the uniquely mixed micro-/macroporous membrane support positions such an electrode among the best-known heteroatom-based carbon anodes for hydrazine fuel cells. Combined with advanced characterization techniques, electrochemical probe experiments, and density functional theory calculation, the pyrrole-type FeN4 structure is identified as the real catalytic site in HzOR.
RESUMO
Extensive atomistic simulations demonstrated that a gradual substitution of hexyl chains with phenyl groups in tetraalkylphosphonium cations results in remarkable changes in hydrogen bonding interactions, liquid structures and scattering structural functions, and rotational dynamics of hexyl chains and phenyl groups in tetraalkylphosphonium bis(trifluoromethylsulfonyl)imide ionic liquids. Hydrogen donor sites in hexyl chains present competitive characteristics with those in phenyl groups in coordinating anions, as well as their continuous and intermittent hydrogen bonding dynamics. Cation-cation and anion-anion spatial correlations show concomitant shift to short distances with decreased peak intensities with variations of cation structures, whereas cation-anion correlations have a distinct shift to large radial distances due to decreased associations of anions with neighboring cations. These microstructural changes are qualitatively manifested in shifts of prominent peaks for prevalent charge alternations and adjacency correlations between ion species in scattering structural functions. Meanwhile, rotational dynamics of hexyl chains speed up, which, in turn, slow down rotations of phenyl groups, whereas anions exhibit imperceptible changes in their rotational dynamics. These computational results are intrinsically correlated with conformational flexibilities, molecular sizes, and steric hindrance effects of phenyl groups in comparison with hexyl chains, and constrained distributions of anions around cations in heterogeneous ionic environments.
RESUMO
Hydrogen bonding and charge transport in the protic polymerized ionic liquid poly[tris(2-(2-methoxyethoxy)ethyl)ammoniumacryloxypropyl sulfonate] (PAAPS) are studied by combining Fourier transform infrared (FTIR) and broadband dielectric spectroscopy (BDS) in a wide temperature range from 170 to 300 K. While the former enables to determine precisely the formation of hydrogen bonds and other moiety-specific quantized vibrational states, the latter allows for recording the complex conductivity in a spectral range from 10-2 to 10+9 Hz. A pronounced thermal hysteresis is observed for the H-bond network formation in distinct contrast to the reversibility of the effective conductivity measured by BDS. On the basis of this finding and the fact that the conductivity changes with temperature by orders of magnitude, whereas the integrated absorbance of the N-H stretching vibration (being proportional to the number density of protons in the hydrogen bond network) changes only by a factor of 4, it is concluded that charge transport takes place predominantly due to hopping conduction assisted by glassy dynamics (dynamic glass transition assisted hopping) and is not significantly affected by the establishment of H-bonds.