RESUMO
Although mechanically interlocked molecules (MIMs) display unique properties and functions associated with their intricate connectivity, limited assembly strategies are available for their synthesis. Herein, we presented a synergistic assembly strategy based on coordination and noncovalent interactions (π-π stacking and CHâ¯π interactions) to selectively synthesize molecular closed three-link chains ([Formula: see text] links), highly entangled figure-eight knots ([Formula: see text] knots), trefoil knot ([Formula: see text] knot), and Borromean ring ([Formula: see text] link). [Formula: see text] links can be created by the strategic assembly of nonlinear multicurved ligands incorporating a furan or phenyl group with the long binuclear half-sandwich organometallic Cp*RhIII (Cp* = η5-pentamethylcyclopentadienyl) clip. However, utilizing much shorter binuclear Cp*RhIII units for union with the 2,6-naphthyl-containing ligand led to a [Formula: see text] knot because of the increased π-π stacking interactions between four consecutive stacked layers and CHâ¯π interactions. Weakening such π-π stacking interactions resulted in a [Formula: see text] knot. The universality of this synergistic assembly strategy for building [Formula: see text] knots was verified by utilizing a 1,5-naphthyl-containing ligand. Quantitative conversion between the [Formula: see text] knot and the simple macrocycle species was accomplished by adjusting the concentrations monitored by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Furthermore, increasing the stiff π-conjugated area of the binuclear unit afforded molecular Borromean ring, and this topology is a topological isomer of the [Formula: see text] link. These artificial metalla-links and metalla-knots were confirmed by single-crystal X-ray diffraction, NMR and ESI-MS. The results offer a potent strategy for building higher-order MIMs and emphasize the critical role that noncovalent interactions play in creating sophisticated topologies.
RESUMO
The quest for more efficient, user-friendly, and less wasteful topological transformations remains a significant challenge in the realm of postassembly modifications. In this article, high yields of two molecular trefoil knots (Rh-1, Ir-1) were obtained using ligand 3,6-bis(3-(pyridin-4-yl)phenyl)-1,2,4,5-tetrazine (L1) with reactive tetrazine units and binuclear half-sandwich organometallic units [Cp*2M2(µ-TPPHZ)(OTf)2](OTf)2 (Rh-B, M = RhIII; Ir-B, M = IrIII). 2,5-Norbornadiene was used as an inducer of the Diels-Alder click reaction to modulate rapidly and efficiently the transformation of Trefoil knots to Solomon links. However, the key to achieving this topological structural change is the subtle increase in site steric of the pyridazine fragments (L2), which allows the molecular structures to spread and bend in three-dimensional space, as confirmed by single-crystal X-ray diffraction, ESI-TOF/MS, elementary analysis and detailed solution-state NMR techniques.
RESUMO
A method was developed to link two or three o-carborane moieties to form a series of carboranyl dithioester bridging ligands via inâ situ substitution of haloalkanes by tetraphenylphosphonium carboranyldithiocarboxylates. Based on these ligands, direct B-H activation without the assistance of Ag(I) and alkali was successfully achieved with half-sandwich Ir(III) substrate [Cp*IrCl2]2 to yield corresponding bimetallic or trimetallic complexes. Single crystal structure analyses of the B-H activated complexes and corresponding SnCl2-inserted derivatives confirm the selective B(3)-H activation in these complexes.
RESUMO
Through a coordination-driven self-assembly method, four 4 1 2 ${4_1^2 }$ metalla-links and one tetranuclear monocycle were constructed with high selectivity and yield by adjusting the substituent species of the building blocks, as evidenced using X-ray crystallographic analysis, electrospray ionization-time-of-flight/mass spectrometry (ESI-TOF/MS), elemental analysis and detailed solution-state nuclear magnetic resonance (NMR) spectroscopy. Based on X-ray crystallographic analysis and independent gradient model analysis, a significant factor leading to the formation of 4 1 2 ${4_1^2 }$ metalla-links was the introduction of F, Cl, Br and I atoms, which generated additional weak C-Hâ â â X (X=F, Cl, Br and I) interactions. Furthermore, the dynamic conversion of 4 1 2 ${4_1^2 }$ metalla-links to monocyclic rings in methanol solution was systematically investigated using quantitative 1H NMR techniques.
RESUMO
In this work, a noncoplanar terphenyl served as a building block to synthesize a novel 3,3'-substituted bipyridyl ligand (L1) which further reacted with binuclear half-sandwich units A/B, giving rise to two aesthetic 41 metalla-knots in high yields via a coordination-driven self-assembly strategy. Furthermore, given the inherent compactness of the 41 metalla-knots, it creates favorable conditions for the emergence of steric repulsion. We focused on progressively introducing nitrogen atoms featuring a lone pair of electrons (LPEs) into ligand L1 to manipulate the balance of Hâ â â H/LPEsâ â â LPEs steric repulsion during the assembly process, ultimately achieving controlled assembly from 41 metalla-knots to the pseudo-Solomon link and then to molecular tweezer-like assembly facilitated by stacking interactions. All the assemblies were well characterized by solution-state NMR techniques, ESI-TOF/MS, and single-crystal X-ray diffraction. The evolutionary process of the topological architectures is equivalent to visualizing the synergistic effect of steric hindrance and stacking interactions on structural assembly, providing a new avenue for achieving the controlled synthesis of different topologies.
RESUMO
Facilitated by multiple stacking interactions between components, two kinds of metalla-links containing molecular Borromean rings (623 links) and head-to-tail cyclic [3]catenanes (613 links), as isomers, were constructed in high yield by introducing tri-µ-methoxyl-dinuclear complexes [(Cp*M)2(µ-OCH3)3][OTf] (M = RhIII or IrIII, Cp* = η5-pentamethylcyclopentadienyl, OTf = triflate) as unusual cationic guests during coordination-driven assembly. The topology of these intricate structures was controlled by strategically selecting two dipyridyl ligands that differ in their coordination orientations, as evidenced by X-ray crystallography and electrospray ionization-time-of-flight/mass spectrometry analysis. The behavior of the abovementioned metalla-links in solution was monitored and further studied by the detailed NMR techniques.
RESUMO
A series of Cp* Rh-based discrete architectures was constructed by selecting four ether bipyridyl ligands and three half-sandwich rhodium(III) bimetallic construction units, respectively. This study demonstrates a strategy for making the transition from a binuclear D-shaped ring to a tetranuclear [2]catenane by adjusting the length of bipyridyl ligands. In addition, changing the position on the naphthyl group of the bipyridyl ligand from 2,6- to 1,5-position substitution can realize the selective synthesis of [2]catenane and Borromean rings under similar conditions. The above-mentioned constructions have been determined via X-ray crystallographic analysis, detailed NMR techniques, electrospray ionization-time-of-flight/mass spectrometry analysis, and elemental analysis.
RESUMO
By exploiting coordination-driven self-assembly, high yields of two 818 molecular metalla-knots could be obtained using a thiazole-moiety-containing asymmetric dipyridyl ligand 2-(pyridin-4-yl)-5-(pyridin-4-ylethynyl)benzo[d]thiazole (L1 ), as confirmed using X-ray crystallographic analysis, electrospray ionization-time-of-flight/mass spectrometry (ESI-TOF/MS), and detailed liquid-state nuclear magnetic resonance (NMR) spectroscopy. To modulate the self-assembled structures, m-chloroperbenzoic acid (m-CPBA) was utilized to oxidize thiazole-based ligand L1 to N-thiazole-oxide-based ligand 2-(pyridin-4-yl)-5-(pyridin-4-ylethynyl)benzo[d]thiazole 3-oxide (L2 ), which enabled the selective construction of the corresponding tetranuclear macrocycles. Notably, two molecular metalla-knots could be topologically transformed from 818 knots to simple monocycles because the L1 alkyne bond was inert toward m-CPBA, as confirmed by liquid-state NMR spectroscopy, ESI-TOF/MS, and elemental analysis.
RESUMO
Two molecular metalla-knots containing over 500 non-hydrogen atoms (especially 16 RhIII ions) and one molecular Borromean ring were obtained in high yields facilitated by multiple intermolecular interactions between their components. The syntheses rely on the strategic selection of the nonlinear dipyridyl ligand 2,7-di(pyridin-4-yl)-9H-fluorene (L1) as precursor, and the structures of the assemblies were confirmed by detailed X-ray crystallographic analysis. Subsequently, replacing L1 with the bulkier ligand 4,4'-(9,9-dimethyl-9H-fluorene-2,7-diyl)dipyridine (L2) led to the formation of three tetranuclear metallocycles in high yields on account of the weakened π-π stacking interactions between the naphthacene/anthracene and fluorene moieties, which in turn confirmed the significance of stacking interactions in the construction of the molecular 818 metalla-knots and the molecular Borromean ring.
RESUMO
BACKGROUND: Revisions are mainly caused by wear debris-induced aseptic loosening. How to effectively suppress debris-induced periprosthetic osteolysis has become an urgent problem. Both zoledronic acid and teriparatide can increase the bone mass around prostheses and increase the stability of prostheses. A hypothesis was proposed: the combination of the two drugs may have a better treatment effect than the use of either drug alone. METHODS: We created a rabbit model to study the effect and mechanism of the combination of zoledronic acid and teriparatide in the treatment of aseptic loosening. Thirty-two adult male New Zealand white rabbits were selected and treated with TKA surgery, and a titanium rod prosthesis coated evenly with micrometre-sized titanium debris was implanted into the right femoral medullary cavity. All rabbits were randomized into four groups (control group = 8, zoledronic acid group = 8, teriparatide group = 8, and zoledronic acid + teriparatide group = 8). All the animals were sacrificed in the 12th week, and X-ray analyses, H&E staining, Goldner-Masson trichrome staining, von Kossa staining, and RT-PCR and Western blotting of the mRNA and protein of OCN, OPG, RANKL and TRAP5b in the interface membrane tissues around the prostheses were immediately carried out. RESULTS: The results shown that both zoledronic acid and teriparatide could inhibit debris-induced peri-prosthetic osteolysis and promote new bone formation. Zoledronic acid was more capable of inhibiting osteoclast activation and peri-prosthetic osteolysis, while teriparatide was more capable of promoting osteoblast function and peri-prosthetic bone integration. CONCLUSION: This research confirmed that the combination of zoledronic acid and teriparatide could prevent and treat aseptic loosening of the prosthesis more effectively. However, the safety of this combination and the feasibility of long-term application have not been ensured, and the clinical application requires further experiments and clinical research support.
Assuntos
Osteólise , Teriparatida , Animais , Masculino , Osteoclastos , Osteólise/tratamento farmacológico , Osteólise/etiologia , Osteólise/prevenção & controle , Falha de Prótese , Coelhos , Titânio , Ácido ZoledrônicoRESUMO
A Cp*-Rh based D-shaped binuclear metallacycle and a template-free molecular Borromean ring (BR) were obtained in high yield using the semi-rigid thioether dipyridyl ligand 1,4-bis[(pyridin-4-ylthio)methyl]benzene (Bptmb). The topological transformation from a binuclear metallacycle and a BR to tetranuclear metallacycles was realized via the controlled oxidation of thioethers. The strategy used in this work can be regarded as a new form of stimuli-responsive post-synthesis modification (PSM).
RESUMO
BACKGROUND: The major causes of failure after total knee arthroplasty (TKA) include prosthesis loosening and infection. This study aimed to investigate the role of carboxymethyl chitosan (CMC) in knee arthroplasty. METHODS: A total of 20 New Zealand white rabbits that were divided into two groups (10 in the control group and 10 in the chitosan group) were included in the study. They underwent TKA surgery, and all were implanted with titanium rod prostheses; the prosthesis in the chitosan group was coated with CMC. After 12 weeks, all rabbits were euthanized, and the following analyses of some specific surface membrane tissues around the prosthesis were performed: X-ray analysis; micro-computed tomography scan; haematoxylin and eosin, Van Gieson, and Von Kossa staining; reverse transcription polymerase chain reaction; and Western Blotting. RESULTS: The result of CCK8 test showed CMC can promote cell proliferation and increase cell viability. Radiological result showed better amount of bone deposits and more bone formation in the chitosan group. HE staining result showed CMC reduces inflammation around the prosthesis. The VG and Von Kossa staining results showed CMC can promote bone deposition around prosthesis. And according to the results of PCR and WB, the OCN content was higher in the chitosan group, while the MMPs content was lower. The chitosan group has an increased OPG/RANKL ratio than the control group. CONCLUSION: CMC can effectively inhibit the inflammatory response around the prosthesis and osteoclast activation and promote osteogenesis by interfering with the osteoprotegerin/receptor activator of nuclear factor kappa-Β ligand/receptor activator of nuclear factor kappa-Β signalling pathway.
Assuntos
Artroplastia do Joelho , Quitosana , Animais , Artroplastia do Joelho/efeitos adversos , Inflamação/tratamento farmacológico , Osteogênese , Osteoprotegerina , Ligante RANK , Coelhos , Microtomografia por Raio-XRESUMO
A template-free Cp*Ir-based molecular Solomon link and an unusual trefoil knot induced by stacking interactions were realized via selection of the nonrigid dipyridyl ligand 4,4'-bis(pyridin-4-ylmethyl)-1,1'-biphenyl (BpmBp). In addition, a novel heterobimetallic tetranuclear (IrIII2 + AgI2) complex featuring argentophilic interaction was synthesized in high yield. Remarkably, the reversible topological transformation between the Solomon link and an unusual trefoil knot can be achieved by utilizing the chemical reactivity of silver(I) ions under mild conditions, as demonstrated by a detailed X-ray crystallographic study.
RESUMO
Over the last two decades, interlocked molecular species have received considerable attention, not only because of their intriguing structures and topological importance, but also because of their potential applications as smart materials, nanoscale devices, and molecular machines. Through judicious choice of metal centers and their adjoining ligands, a range of interesting interlocked structures have been realized by coordination-driven self-assembly. In addition, researchers have extensively developed synthetic methodologies for the construction of organized self-assemblies. One fascinating and challenging synthetic target in this field is the family of molecular Borromean rings, which consist of three chemically independent rings that are locked in such a way that no two of the three rings are linked with each other. Toward this goal, we have developed a template-free self-assembly method for synthesizing molecular Borromean rings by rationally designing metal-containing precursors and organic ligands. In this Account, we present our recent work, focusing on interlocked structures comprising half-sandwich iridium- and rhodium-based organometallic assemblies obtained by rational design. We first describe a series of template-free self-assembled organometallic molecular Borromean rings, which we constructed from preorganized binuclear half-sandwich molecular clips and suitable pyridyl ligands. These molecular Borromean rings can be sorted into four types according to their different bridging ligands, including those based on metallaligands, dihalogenated ligands, naphthazarin and π-acceptor ligands. By single-crystal X-ray crystallographic analysis, NMR experiment, and DFT calculation, we discuss their driving forces and the inter-ring interactions. Furthermore, we took advantage of the dissimilarity in their interactions to realize selective, reversible conversions between molecular Borromean rings and monomeric rectangles by the use of suitable solvents or guest molecules. Subsequently, a stepwise chemoseparation method based on molecular Borromean rings was established, with the molecular Borromean rings used in the separation being recoverable and recyclable. Due to their structural complexity and difficult synthesis, useful guidelines or rules to help design complicated interlocked molecules are highly desirable. We also highlight our efforts to develop empirical guidelines to uncover the relationship between the aspect ratio of metallarectangles and the formation or stability of molecular Borromean rings. An empirical formula has further been established to show the approximate ratio of lengths of the short arm and the long arm in molecular Borromean rings based on π-π (or p-π) stacking. We then demonstrate how to use these guidelines to design new molecular Borromean rings and further lead to other interlocked structures, for example, [2]- and [3]catenane structures. Taken together, our results may lead to a promising future for the design of fascinating and useful interlocked structures by coordination-driven self-assembly.
RESUMO
A series of metallosupramolecular architectures have been prepared, including rectangles, prisms and cages, that feature half-sandwich rhodium(III) fragments at the vertices. Remarkably, a stable cage-like heteropolymetallic complex possessing eight rhodium(III) and two silver(I) metal ions (3) has been obtained following a multistep procedure. The RhIII /AgI mixed macrocage enables the separation of dihalogenated benzene derivatives with high selectivity. Furthermore, a detailed X-ray crystallographic study confirmed that the discriminative encapsulation of para-dihalobenzene (dichlorobenzene, dibromobenzene and diiodobenzene) is favored by Ag-π interactions and steric effects.
RESUMO
The Piezo1 protein ion channel is a novel mechanical stretch-activated ion channel (SAC) closely related to mechanical signals. Mechanotransduction plays a crucial role in organ development and homeostasis. Previous studies identified Piezo1 and demonstrated that it is distinct from other ion channels with well-established roles in lower organisms. Mechanical stretch-activated ion channels from other organisms are not conserved in mammals or do not act as mechanically activated channels in mammals. In the current study, we explored the role of the Piezo1 ion channel in human nucleus pulposus cell (NP cell) apoptosis through mechanical force-induced mitochondrial dysfunction and endoplasmic reticulum stress. Reverse Transcription Polymerase chain reaction (RT-PCR), immunofluorescence, immunohistochemistry and Annexin V binding and propidium iodide analyses revealed that the Piezo1 protein ion channel was highly expressed in human NP cells, which are the primary cells that comprise the intervertebral disc. In patients with intervertebral disc degeneration (IVDD), the Piezo1 protein may play a crucial role in human NP cell apoptosis through mitochondrial dysfunction and endoplasmic reticulum stress under abnormal loading conditions. This study also verified that human NP cells have an intimate connection with the cytoskeleton upon treatment of the cells with the Piezo1 blocking peptide GsMTx4 from tarantula venom. In summary, Piezo1 functions in human NP cell apoptosis, which may be one underlying mechanism of apoptosis induced by abnormal loading in IVDD patients.
Assuntos
Apoptose/fisiologia , Estresse do Retículo Endoplasmático/fisiologia , Canais Iônicos/metabolismo , Mecanotransdução Celular/fisiologia , Mitocôndrias/metabolismo , Núcleo Pulposo/metabolismo , Transdução de Sinais , Adulto , Feminino , Homeostase/fisiologia , Humanos , Disco Intervertebral/metabolismo , Transporte de Íons/fisiologia , Masculino , Pessoa de Meia-IdadeRESUMO
In this editorial, we comment on an article by Ruan et al published in a recent issue of the World Journal of Clinical Case. Pulmonary meningothelial proliferative lesions, including primary pulmonary meningiomas, minute pulmonary meningothelial-like nodules, and metastatic pulmonary meningiomas are rare pulmonary lesions. These lesions are difficult to differentiate from lung cancers based on clinical and imaging manifestations. Herein, we briefly introduce the clinical, imaging, and pathological characteristics of these lesions and discuss their pathogenesis to strengthen the current understanding of pulmonary meningothelial proliferative lesions in clinical diagnosis and therapy.
RESUMO
OBJECTIVE: Closed reduction combined with external fixation is a frequently utilized approach for treating distal radial fractures in adults. Nonetheless, the potential for re-displacement following external fixation remains. Analyzing the factors influencing re-displacement after nonsurgical treatment of distal radial fractures in adults is vital for preventing re-displacement and making prognostic assessments. METHODS: A retrospective analysis was performed on 884 patients who underwent nonsurgical treatment for distal radius fractures in the reduction room of the Orthopedics and Traumatology Department of Integrated Traditional Chinese and Western Medicine at Tianjin Hospital, Tianjin, China, between July 2019 and December 2022. Patients were categorized into two groups, namely displaced and nondisplaced, based on radiographic outcomes. Factors affecting fracture re-displacement were examined, including sex, age, side, AO/OTA type, external fixation, and radiographic outcomes at pre-reduction and immediate reduction. Logistic regression analysis was employed to identify the risk factors for fracture re-displacement, and ROC curves were constructed. RESULTS: Among the 884 patients, 563 (63.69%) experienced re-displacement after fracture reduction. There were no statistically significant differences (p > 0.05) between the two groups in terms of gender, external fixation method, and palmar tilt angle at pre-reduction and immediate reduction, while significant differences (p < 0.05) were observed in age, side, AO/OTA type, and radial inclination, radial length, and radiographic outcomes of ulnar variance at pre-reduction and immediate reduction. Multifactorial logistic regression analysis revealed that age (odds ratio [OR] = 1.027, p < 0.001), AO/OTA type (OR = 2.327, p = 0.005), ulnar variance at pre-reduction (OR = 1.142, p = 0.048), and ulnar variance at immediate reduction (OR = 1.685, p < 0.001) were significant factors (p < 0.05) associated with re-displacement following nonoperative treatment of adult distal radius fractures. For patients aged ≥60 years, the amount of missing radiographic outcomes was positively correlated with age. The receiver operating characteristic curve demonstrated that age ≥65.5 years, ulnar variance >3.26 mm at pre-reduction, and ulnar variance >2.055 mm at immediate reduction were high-risk factors for fracture re-displacement. CONCLUSIONS: Nonsurgical treatment of distal radius fractures exhibits a higher rate of re-displacement. Age, AO/OTA type, pre-reduction, and immediate reduction ulnar variance are key factors predicting fracture re-displacement.
Assuntos
Fraturas do Rádio , Fraturas do Punho , Adulto , Humanos , Estudos Retrospectivos , Fraturas do Rádio/terapia , Fraturas do Rádio/cirurgia , Fixação de Fratura/métodos , Prognóstico , Resultado do Tratamento , Fixação Interna de Fraturas/métodos , Placas Ósseas , Amplitude de Movimento ArticularRESUMO
OBJECTIVE: This study aimed to analyze the efficacy of acupuncture alone or combined with physical therapy compared to other treatment interventions for relieving pain and improving function in rotator cuff diseases. METHODS: Our study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. After PROSPERO (CRD42023396740) registration, all randomized controlled trials (RCTs) published from the inception of the databases to October 10, 2023, evaluating the efficacy of acupuncture either alone or in combination with physical therapy for treating rotator cuff diseases, were extracted from seven databases, including PubMed, Embase, the Web of Science, the Cochrane Library, the China National Knowledge Infrastructure (CNKI), the VIP Database for Chinese Technical Periodicals (VIP), and the Wanfang Date. Two independent researchers assessed the quality of the included studies and extracted relevant data. Furthermore, a meta-analysis was conducted using Stata 14 software. RESULTS: We included 13 RCTs - 12 published in English and 1 in Chinese - that enrolled 1,371 patients. The meta-analysis results demonstrated that acupuncture alone or in combination with physical therapy was superior to other interventions for short-term shoulder joint function improvement (standardized mean difference [SMD] = -0.82, 95% confidence interval [95% CI]: -1.28 to -0.35, P = 0.001), medium-term shoulder joint function improvement (SMD = -1.00, 95% CI: -1.62 to -0.38, P = 0.002), short-term pain relief (weighted mean difference [WMD] = -1.37, 95% CI: -2.39 to -0.38, P = 0.006), medium-term pain relief (WMD = -1.66, 95% CI: -2.70 to -0.63, P = 0.002), and post-treatment shoulder joint abduction improvements (SMD = 0.68, 95% CI: 0.20 to 1.16, P = 0.005), external rotation (SMD = 0.62, 95% CI: 0.13 to 1.11, P = 0.012), and forward flexion (SMD = 0.71, 95% CI: 0.44 to 0.97, P < 0.001), with significant differences (P < 0.05). CONCLUSION: Based on the current clinical data, meta-analysis showed that acupuncture alone or combined with physical therapy is efficacious for short- and medium-term (< 3 months) pain relief and functional improvements. However, compared to other interventions, the efficacy of the long-term (3 to 12 months) period did not significantly differ. After treatment, these modalities displayed advantages such as improved shoulder joint abduction, external rotation, and forward flexion movements. However, no significant difference was noted in internal rotation movement. Thus, future studies might further investigate whether different acupuncture methods affect the efficacy of treating rotator cuff diseases and improving long-term outcome.