Aza-Prilezhaev Aziridination-Enabled Multidimensional Analysis of Isomeric Lipids via High-Resolution U-Shaped Mobility Analyzer-Mass Spectrometry.

Unsaturated lipids constitute a significant portion of the lipidome, serving as players of multifaceted functions involving cellular signaling, membrane structure, and bioenergetics. While derivatization-assisted liquid chromatography tandem mass spectrometry (LC-MS/MS) remains the gold standard technique in lipidome, it mainly faces challenges in efficiently labeling the carbon-carbon double bond (C═C) and differentiating isomeric lipids in full dimension. This presents a need for new orthogonal methodologies. Herein, a metal- and additive-free aza-Prilezhaev aziridination (APA)-enabled ion mobility mass spectrometric method is developed for probing multiple levels of unsaturated lipid isomerization with high sensitivity. Both unsaturated polar and nonpolar lipids can be efficiently labeled in the form of N-H aziridine without significant side reactions. The signal intensity can be increased by up to 3 orders of magnitude, achieving the nM detection limit. Abundant site-specific fragmentation ions indicate C═C location and sn-position in MS/MS spectra. Better yet, a stable monoaziridination product is dominant, simplifying the spectrum for lipids with multiple double bonds. Coupled with a U-shaped mobility analyzer, identification of geometric isomers and separation of different lipid classes can be achieved. Additionally, a unique pseudo MS3 mode with UMA-QTOF MS boosts the sensitivity for generating diagnostic fragments. Overall, the current method provides a comprehensive solution for deep-profiling lipidomics, which is valuable for lipid marker discovery in disease monitoring and diagnosis.

Enhanced MALDI-2 Sensitivity with Reflecting Post-Ionization Laser for High-Resolution MS Imaging Combined with Real-Time Microscope Imaging.

Laser-induced matrix-assisted laser desorption/ionization post-ionization (MALDI-2) could improve the MALDI sensitivity of biological metabolites by over 1 order of magnitude. Herein, we demonstrate that MALDI-2 sensitivity can be further enhanced with reflecting post-ionization laser that multiplies the intersection times between laser and MALDI plume. This method, which we named MALDI-2+, typically brought over 2 times sensitivity improvement from conventional MALDI-2. Advancing in sensitivity thereby prompted us to pursue higher mass spectrometry imaging (MSI) spatial resolution. A dedicated T-shaped ion guide was designed to allow perpendicular incidence of ablation laser in reflection geometry MALDI. Although 8-10 µm pixel was used in MALDI imaging due to the limited precision of the motorized stage, the laser spot diameter could be down to 2.5 µm for potentially higher spatial resolution. In addition, this ion source enabled real-time and high-quality microscope imaging from backward of the sample plate. Beneficially, we were able to monitor the actual laser spot condition in real time as well as obtain high-resolution microscopic sample images that inherently register with MSI images. All of these benefits have been demonstrated by analyzing standard samples and imaging of cells. We believe that the enhancement in sensitivity, spatial resolution, and microscope capacity of our design could facilitate spatial omics studies.

Intramolecular Ring-Chain Equilibrium Elimination Strategy for Pinpointing C═C Positional and Geometric Isomers of N-Alkylpyridinium Unsaturated Fatty Acid Derivatives via Ion Mobility-Mass Spectrometry.

Free unsaturated fatty acids (UFA) are key intermediates of lipid metabolism and participate in many metabolic pathways with specific biological functions. Although various fragmentation-based methods for pinpointing C═C locations in UFA were developed, the current mass spectrometry methods are difficult to simultaneously differentiate geometric isomers and positional isomers in trace samples due to low ionization efficiency, low conversion, and low resolution. Herein, an intramolecular ring-chain equilibrium elimination strategy via 4-plex stable isotope labeling dual derivatization-assisted ion mobility-mass spectrometry was developed, thereby one-pot specifically labeling C═C and carboxyl groups among the trace and unstable UFA with high sensitivity, high efficiency, and good substrate generality. It achieved fast separation of both C═C positional and geometric isomers with high resolution, which benefited from eliminating the intramolecular ring-chain equilibrium by suppressing the formation of salt bridges between free carboxyl groups and pyridine cations. 4-plex stable isotope labeling reagents showed similar reactivity, enabling high-throughput quantitative analysis of omics. This method was successfully applied for accurate and rapid identification of the UFA composition in olive oil extract. These results suggest that the developed method provides new insight for rapid characterization of UFA C═C positional and geometric isomers in complex samples to explore disease biomarkers and food quality control indicators.

Resource utilization of stone waste and loess to prepare grouting materials.

Loess, a terrestrial clastic sediment, is formed essentially by the accumulation of wind-blown dust, while stone waste (SW) is an industrial waste produced during stone machining. Utilising loess and SW to prepare environmentally-friendly supplementary cementitious materials can not only address environmental issues caused by solid waste landfills but also meet the demand of reinforcement of coal-seam floor aquifer for grouting materials. In this paper, the effects of the loess/SW mass ratio and calcination temperature on the transformation of calcined products are investigated and their pozzolanic activities are evaluated. The workability, environmental impact and cost of grouting materials based on cement and calcined products are also assessed. Experimental results reveal that higher temperatures favour the formation of free lime and periclase, which tend to be involved in solid-state reactions. Higher temperature and loess/SW mass ratio strengthens the diffraction peaks of dodecalcium hepta-aluminate (C12A7), dicalcium ferrite (C2F) and dicalcium silicate (C2S). The clay minerals in loess become completely dehydroxylated before 825 °C, generating amorphous SiO2 and Al2O3. Covalent Si-O bonds are interrupted and that disordered silicate networks are generated in the calcined products, which is confirmed by the increased strength of the Si29 resonance region at -60 ppm to -80 ppm. Although co-calcined loess and SW contain the most four-fold aluminium at 950 °C, recrystallisation depresses the pozzolanic activity. Hence, the loess/SW sample designated LS2-825 exhibits the better hydration activity. Additionally, grouting materials composed of cement and LS2-825 exhibit good setting times, fluidity, strength and a low carbon footprint in practical engineering applications, and they also provide the additional benefit of being cost effective.

High-energy diet modify rumen microbial composition and microbial energy metabolism pattern in fattening sheep.

Higher dietary energy is often used to achieve better animal performance in mutton sheep production. Notably, changing the diet formula affects rumen fermentation and the microbiota of ruminants. In this study, we investigated the effect of dietary energy on rumen fermentation and ruminal microbiota in fattening sheep. Fifteen 2-month-old white-headed Suffolk sheep (♂) × Hu sheep (♀) crossbred lambs were randomly divided into three treatments based on the dietary energy of the feeds fed: 8.67 MJ/kg (Low energy (LE); n = 5), 10.38 MJ/kg (standard energy (CON); n = 5), and 12.31 MJ/kg (high energy (HE); n = 5) groups. After 70 days of feeding, sheep were slaughtered and the ruminal fluids were collected and analyzed to determine fermentation parameters. Microbiota was determined using metagenomics sequencing. Notably, the microbial cell protein (MCP) and butyric acid concentrations were significantly high in the HE group. Metagenomic sequencing revealed that ACE and Chao indexes of the HE group were significantly decreased. Four genera among the major classified taxa across all the kingdoms differed in relative abundance in the three dietary energy levels. The relative abundances of Prevotella_brevis, Succiniclasticum_ruminis, Prevotellace-ae_bacterium, and Lachnospiraceae_bacterium were significantly correlated with rumen fermentation. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analysis further revealed that a high-energy diet increased lipid metabolism of microbiota. The Carbohydrate Active enzymes (CAZy) gene, which participates in energy metabolism, was upregulated, while genes regulating plant cell wall degradation were downregulated in the HE group. These results suggest that a high-energy diet had minimal influence on the rumen fermentation pattern but altered the composition of the rumen microbiota, enhancing microbial lipid metabolism and limiting crude fiber metabolism. The findings of this study provide scientific evidence of the effect of dietary energy on ruminant fermentation and fattening sheep production.

Remimazolam-remifentanil causes less postoperative nausea and vomiting than remimazolam-alfentanil during hysteroscopy: a single-centre randomized controlled trial.

BACKGROUND: Although the operation time of hysteroscopy is short, the incidence of postoperative nausea and vomiting is high. The aim of this study was to compare the incidence of postoperative nausea and vomiting in hysteroscopy when remimazolam is combined with remifentanil or alfentanil. METHODS: We conducted a randomized, controlled, double-blind trial. Patients undergoing hysteroscopy were recruited and randomly assigned to either the remimazolam-remifentanil (Group RR) or the remimazolam-alfentanil group (Group RA). All patients in the two groups were started with an induction dose of remimazolam besylate 0.2 mg/kg and then maintained with a dosage of 1.0 mg/kg/h. After induction with remimazolam besylate, in Group RR, remifentanil was infused using a target-controlled infusion system with a target concentration of 1.5 ng/ml and titrated throughout the procedure. In Group RA, infusion of alfentanil was started with an initial bolus dose of 20 µg/kg over 30 s and then maintained at an initial rate of 0.16 µg/kg/min. The primary observation outcome was the incidence rate of postoperative nausea and vomiting. The secondary observation outcomes were the time to awakening, the length of stay in the PACU, the total remimazolam dose and adverse effects, such as low SpO2, bradycardia, hypotension and body movement. RESULTS: A total of 204 patients were successfully included in this study. The incidence of postoperative nausea and vomiting in Group RR (2/102, 2.0%) was significantly lower than that in Group RA (12/102, 11.8%) (p < 0.05). There was no significant difference in the incidence of adverse events, such as low SpO2, bradycardia, hypotension and body movement, between Groups RR and RA (p > 0.05). CONCLUSIONS: Remimazolam-remifentanil causes less postoperative nausea and vomiting than remimazolam-alfentanil in hysteroscopy. TRIAL REGISTRATION: Clinical trial registration number: ChiCTR2100044177. Full date of the first registration: 12/03/2021.

Adult Bone Marrow-Derived Mesenchymal Stem Cells Seeded on Tissue-Engineered Cardiac Patch Contribute to Myocardial Scar Remodeling and Enhance Revascularization in a Rabbit Model of Chronic Myocardial Infarction.

BACKGROUND: Although the transplantation of tissue-engineered cardiac patches with adult bone marrow-derived mesenchymal stem cells (MSCs) can enhance cardiac function after acute or chronic myocardial infarction (MI), the recovery mechanism remains controversial. This experiment aimed to investigate the outcome measurements of MSCs within a tissue-engineered cardiac patch in a rabbit chronic MI model. METHODS: This experiment was divided into four groups: left anterior descending artery (LAD) sham-operation group (N = 7), sham-transplantation (control, N = 7), non-seeded patch group (N = 7), and MSCs-seeded patch group (N = 6). PKH26 and 5-Bromo-2'-deoxyuridine (BrdU) labeled MSCs-seeded or non-seeded patches were transplanted onto chronically infarct rabbit hearts. Cardiac function was evaluated by cardiac hemodynamics. H&E staining was performed to count the number of vessels in the infarcted area. Masson staining was used to observe cardiac fiber formation and to measure scar thickness. RESULTS: Four weeks after transplantation, a remarkable improvement in cardiac functionality could be distinctly observed, which was most significant in the MSCs-seeded patch group. Moreover, labeled cells were detected in the myocardial scar, with most of them differentiated into myofibroblasts, some into smooth muscle cells, and only a few into cardiomyocytes in the MSCs-seeded patch group. We also observed significant revascularization in the infarct area implanted in either MSCs-seeded or non-seeded patches. In addition, there were significantly greater numbers of microvessels in the MSCs-seeded patch group than in the non-seeded patch group.

Unidirectional spintronic terahertz emitters with high efficiency.

Due to the high performance and low cost, spintronic terahertz emitters (STEs) have been a hot topic in the field of terahertz sources. However, most of the research focuses on the THz generation process and little attention has been paid to the control and modulation of the THz wave generated by the STE. In this Letter, a unidirectional spintronic terahertz emitter (USTE) integrating a common STE with a metal grating is proposed to manipulate the THz emission process. The dyadic Green's function method and finite element method are adopted to survey the characteristics of the USTE. Simulations show that the metal grating not only has a transmission larger than 97% in the optical band, but also has a higher reflectivity larger than 99% in the THz band. As a result, the USTE has a unidirectional THz emission along the direction of the pump beam with a larger than 4-fold enhancement in intensity. Moreover, the USTE has the capability of tuning the central frequency and THz wave steering by adjusting the distance and angle between the STE and the metal grating. We believe that this USTE can be used in THz wireless communications and holographic imaging, especially in the field of THz bio-sensing, which needs some resonance frequencies to sense.

USP18 promotes tumor metastasis in esophageal squamous cell carcinomas via deubiquitinating ZEB1.

The dysregulation of deubiquitinating enzymes (DUBs), which regulate the stability of most cellular proteins, have been implicated in many human diseases, including cancers. Ubiquitin-specific protease 18 (USP18), a member of the DUBs family, functions as a potential tumour promoter in various cancers. However, the biological function and clinical significance of USP18 in esophageal squamous cell carcinomas (ESCC) are still unclear. Here, we found that ESCC tumors had higher USP18 expression compared with that of normal esophageal epithelial tissues, and high USP18 level was significantly correlated with malignant phenotype and shorter survival in patients with ESCC. In functional experiments, USP18 knockdown significantly inhibited ESCC invasion and metastasis in vitro. Consistently, a xenograft assay showed that knockdown of USP18 in ESCC cell suppressed their dissemination to lung tissue in vivo. Furthermore, we showed that USP18 promoted ESCC cell metastasis by inducing ZEB1 mediated epithelial-mesenchymal transition (EMT). Importantly, our results demonstrated that the oncogenic effect of USP18 in ESCC is partially dependent on ZEB1 enhancement. Mechanistic investigations revealed that USP18 directly bound ZEB1 and decreased its ubiquitination to enhance the protein stability of ZEB1 in ESCC cells. Overall, our data highlighted an essential role of USP18 in ESCC metastasis, suggesting that it could be a potential diagnostic and therapeutic target for ESCC.

Material priority engineered metal-polyphenol networks: mechanism and platform for multifunctionalities.

Engineering the surface of materials with desired multifunctionalities is an effective way to fight against multiple adverse factors during tissue repair process. Recently, metal-polyphenol networks (MPNs) have gained increasing attention because of their rapid and simple deposition process onto various substrates (silicon, quartz, gold and polypropylene sheets, etc.). However, the coating mechanism has not been clarified, and multifunctionalized MPNs remain unexplored. Herein, the flavonoid polyphenol procyanidin (PC) was selected to form PC-MPN coatings with Fe3+, and the effects of different assembly parameters, including pH, molar ratio between PC and Fe3+, and material priority during coating formation, were thoroughly evaluated. We found that the material priority (addition sequence of PC and Fe3+) had a great influence on the thickness of the formed PC-MPNs. Various surface techniques (e.g., ultraviolet-visible spectrophotometry, quartz crystal microbalance, X-ray photoelectron spectroscopy, atomic force microscopy, and scanning electron microscopy) were used to investigate the formation mechanism of PC-MPNs. Then PC-MPNs were further engineered with multifunctionalities (fastening cellular attachment in the early stage, promoting long-term cellular proliferation, antioxidation and antibacterial activity). We believe that these findings could further reveal the coating formation mechanism of MPNs and guide the future design of MPN coatings with multifunctionalities, thereby greatly broadening their application prospects, such as in sensors, environments, drug delivery, and tissue engineering.

Serum miR-377 Can Be Used as a Diagnostic Marker for Acute Coronary Syndrome and Can Regulate Proinflammatory Factors and Endothelial Injury Markers.

The diagnostic value of microRNA-377 (miR-377) in patients with acute coronary syndrome (ACS) and explored miR-377's potential mechanisms. We performed an qRT-PCR to assess serum miR-377 levels in ACS patients and coronary artery ligation rat models. The diagnostic value of miR-377 was evaluated by determining the ROC curve. An ELISA assay was conducted to detect the model rat endothelial damage markers von Willebrand factor (vWF) and heart-type fatty acid binding protein (H-FABP), and proinflammatory cytokines TNF-α, IL-6, and IL-1ß. The serum miR-377 level was elevated in the ACS patients and significantly increased in the ACS rats. MiR-377 has a high diagnostic value in ACS patients, with a 0.844 ROC, 76.47% specificity, and 87.10% sensitivity. MiR-377 was positively correlated with the expressions of vWF, H-FABP, cTnI, TNF-α, IL-6, and IL-1ß. In ACS rats, reducing the expression of miR-377 significantly inhibited the increases in vWF, H-FABP, TNF-α, IL-6, and IL-1ß. An elevated miR-377 level can be used as a diagnostic marker in patients with ACS. A reduction of miR-377 may alleviate ACS by improving myocardial damage such as endothelial injury and the inflammatory response.

Secondary Structure-Dominated Layer-by-Layer Growth Mode of Protein Coatings.

Benefiting from the luxury functions of proteins, protein coatings have been extended to various applications, including tissue engineering scaffolds, drug delivery, antimicrobials, sensing and diagnostic equipment, food packaging, etc. Fast construction of protein coatings is always interesting to materials science and significant to industrialization. Here, we report a layer-by-layer (LbL) multilayer-constructed coating of tannic acid (TA) and lysozyme (Lyz), in which the secondary conformations of Lyz dominate the growth rate of the TA/Lyz coating. As well characterized by various techniques (quartz crystal microbalance with dissipation (QCM-D), circular dichroism (CD) spectra, Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), contact angle, etc.), TA-induced conformational transition of Lyz to α-helices occurs at pH 8 from other secondary structures (ß-sheets, ß-turns, and random coils), which leads to the very fast growth of TA/Lyz with a number of deposited bilayers, with thicknesses of more than 90 nm for six bilayers. In contrast to the leading conformation of α-helices at pH 8, Lyz displayed multiple conformations (α-helices, ß-sheets, ß-turns, and random coils) at pH 6, which resulted in coating thicknesses of less than 30 nm for six bilayers. By the addition of NaCl, Tween 20, and urea, we further confirmed that the secondary conformations of Lyz relied greatly on the interactions between TA and Lyz and dominated the growth rate of the multilayers. We believe that these findings will help to understand the transformation of secondary conformations by TA or other polyphenols and inspire a new route to quickly build protein coatings.

Silanization of a Metal-Polyphenol Coating onto Diverse Substrates as a Strategy for Controllable Wettability with Enhanced Performance to Resist Acid Corrosion.

Wettability is a crucial characteristic of materials that plays a vital role in surface engineering. Surface modification is the key to changing the wettability of materials, and a simple and universal modification approach is being extensively pursued by researchers. Recently, metal-phenolic networks (MPNs) have been widely studied because they impart versatility and functionality in surface modification. However, an MPN is not stable for long periods, especially under acidic conditions, and is susceptible to pollution by invasive species. Spurred by the versatility of MPNs and various functionalities achieved by silanization, we introduce a general strategy to fabricate functionally stable coatings with controllable surface wettability by combining the two methods. The formation process of MPN and silane-MPN coatings was characterized by spectroscopic ellipsometry (SE), UV-visible-near-infrared (UV-vis-NIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), water contact angle (WCA), etc. We found that the stability of the MPN was greatly enhanced after silanization, which is attributed to the cross-linking effect that occurs between silane and the MPN, namely, the cross-linking protection produced in this case. Additionally, the wettability of an MPN can be easily changed through our strategy. We trust that our strategy can further extend the applications of MPNs and points toward potential prospects in surface modification.

Heterogeneous Interface Design to Enhance the Photocatalytic Performance.

Heterojunction photocatalysts, which can relieve the low carrier separation efficiency and insufficient light absorption ability of one catalyst, have received extensive attention. To construct an ideal heterojunction for photocatalysis, most previous studies focused on energy band structure engineering to prolong charge carrier lifetime and increase the reaction rates, which are critical to increase the photocatalytic activity. Here, the heterojunction interface was surprisingly found to be another important factor to affect the photocatalytic performance. We design three heterojunction interface models of α-Fe2O3/Bi2O3, corresponding to "ring-to-face", "face-to-face", and "rod-to-face". By tuning the heterogeneous interfaces, the photocatalytic performance of composites was significantly improved. On the basis of the type I energy band structures, the optimized face-to-face model realized a photocatalytic efficiency of 90.8% that of pure α-Fe2O3 (<30%) for degradation of methylene blue and a higher efficiency (80%) for degrading tetracycline within 60 min, which were superior to most Fe/Bi/O-based photocatalytic heterojunctions. Furthermore, the results disclosed that the enhanced performance was owing to the sufficient interfacial contact and low interfacial resistance of the face-to-face model, which provided sufficient channels for efficient charge transfer. This work offers a new direction of tuning heterojunction interface for designing composite photocatalysts.

Efficacy and safety of remimazolam besylate versus propofol during hysteroscopy: single-centre randomized controlled trial.

BACKGROUND: Remimazolam besylate is a newer benzodiazepine with characteristics of quick onset of effects, short maintenance and recovery times without accumulation in tissues. This trial was conducted to confirm the efficacy and safety of remimazolam besylate versus propofol during hysteroscopy. METHODS: Patients undergoing hysteroscopy were randomly assigned to either the remimazolam (Group R) or the propofol group (Group P). Group R was administered an induction dose of 0.2 mg/kg and a maintenance dosage of 1.0 mg/kg/h. In Group P, propofol was started at 1.5-2.0 mg/kg and then maintained at 3.0-6.0 mg/kg/h. After remimazolam besylate or propofol induction, remifentanil was infused using a target-controlled infusion system with a target concentration of 1.5 ng/ml and titrated during the procedure. The incidence rates of injection pain, low oxygen saturation (SpO2) and adverse effects in both groups were compared. RESULTS: Eighty-two patients were included in this study. The incidence of adverse events in Group R (3.7%) was significantly lower than that in Group P (36.6%) (p < 0.001). The incidence of injection pain in Group P (80.5%) was much higher than that in Group R (2.4%) (p < 0.001). The incidence of other adverse events, such as low SpO2, bradycardia, and hypotension in Group R was lower than that in Group P (p < 0.05). CONCLUSIONS: Remimazolam besylate proves to be a safer alternative for anesthesia during hysteroscopy. Moreover, adverse events caused by propofol, such as low SpO2 and injection pain, are largely avoided. TRIAL REGISTRATION: This study was approved by the Clinical Research Ethics Committee of Mengcheng County No. 1 People's Hospital (2020MYL20003) and registered at http://www.chictr.org.cn (15/09/2020, ChiCTR-2000038252 ). The study protocol followed the CONSORT guidelines. The study protocol was performed in the relevant guidelines.

Rapid Discrimination of Citrus reticulata 'Chachi' by Electrospray Ionization-Ion Mobility-High-Resolution Mass Spectrometry.

A common idea is that some dishonest businessmen often disguise Citrus reticulata Blanco varieties as Citrus reticulata 'Chachi', which places consumers at risk of economic losses. In this work, we combined high-resolution ion mobility (U-shaped mobility analyzer) with high-resolution mass spectrometry to rapidly distinguish Citrus reticulata 'Chachi' from other Citrus species. The samples were analyzed directly through simple extraction and the analytes were separated in one second. It only took about 1 min to perform a cycle of sample analysis and data acquisition. The results showed that polymethoxylated flavones and their isomers were separated easily by the ion mobility analyzer and preliminarily identified according to the accurate mass. Moreover, the collision cross-section values of all analytes, which could be used as auxiliary parameters to characterize and identify the compounds in the samples, were measured. Twenty-four samples were grouped as two clusters by multivariate analysis, which meant that Citrus reticulata 'Chachi' could be effectively differentiated. It was confirmed that the developed method had the potential to rapidly separate polymethoxylated flavones and distinguish between Citrus reticulata 'Chachi' and other Citrus reticulata Blanco varieties.

[Optimization Design of Emergency Quick Fixation Device Based on ANSYS Workbench].

OBJECTIVE: A rapid fixation device is developed to solve the problems of emergency fixation and transportation of patients with spinal injury. METHODS: Through the analysis of the function,3D modeling design, finite element analysis and optimization design based on ANSYS Workbench, tensile strength verification experiment, we produced the prototype, and tested it, conducted a simulated rescue experiment. RESULTS: The fixation device designed can meet the demand of spinal injury patients for safe rescue after accidents, and the quality of the rapid fixation device was lighten by about 30% without reducing the intensity. CONCLUSIONS: The method based on optimal design can obviously improve the structure design, and has reference significance for other related rescue equipment design.

U-Shaped Mobility Analyzer: A Compact and High-Resolution Counter-Flow Ion Mobility Spectrometer.

In recent years, there has been a rapid increase in the use of counter-flow-type ion mobility spectrometers (IMS) due to their improved resolution and functionality. In this study, we developed a new type of counter-flow ion mobility device named the U-shaped mobility analyzer (UMA) for coupling with a mass spectrometer, where the analyte ions could travel along a gas flow in the first channel of the UMA device and then against a gas flow in the second channel of the device. Hence, a mobility band-pass filter was formed by setting different electric fields in the two channels, which enables high-resolution mobility selection of analyte ions. A resolution of ca. 180 was achieved for singly charged small organic molecules, and a resolution of up to ca. 370 was achieved for multiply charged +15 myoglobin. It was thus demonstrated that this filtering function can greatly enhance the dynamic range of an IMS-MS instrument, particularly favoring targeted analysis in complex matrices. Alternatively, the analyte ions could be operated in a so-called trap-scan mode in which ions were trapped first in one of the channels and released sequentially for mobility analysis with an even higher resolution (ca. 210 for singly charged small organic molecules and ca. 590 for +15 myoglobin). Overall, this new UMA device would enable many new applications in omics studies with its high resolution and dynamic range, especially when using the filter-scan mode for scrutinizing analytes with very low concentrations under high chemical backgrounds.

Tailoring the magnetic field induced by the first higher order mode of an optical fiber.

In this paper, according to the inverse Faraday effect (IFE), the amplitude, phase, polarization and field distribution of the first higher order mode of an optical fiber are tailored carefully, and a magnetic field with arbitrary orientation is generated in the focal region. Compared with traditional strategies to generate a magnetic field with arbitrary orientation, where the configurations are complicated and the components employed for the system are costly, the first higher order mode of a fiber, which has two lobes with opposite instantaneous electric fields, draws more attention for generating a magnetic field with arbitrary orientation. We believe that such an arbitrary orientation state of magnetic field can be applied in the field of confocal and magnetic resonance microscopy and spin dynamics, especially for the use of optical magnetic recording, where laser pulses are used to trigger the magnetization switching.

Fully controllable three-dimensional light-induced longitudinal magnetization using a single objective lens.

With features of fast and energy-efficient data writing, all-optical helicity-dependent switching (AO-HDS) has emerged as a competitive technology to satisfy the demand for the next-generation volume data storage. Unfortunately, to switch the magnetizations in different positions of the magnetic-optic film, the laser beam, the objective lens, or the magnetic recording film should be moved, limiting the advantage of AO-HDS in fast data writing. To achieve on-the-fly magnetization switching, the induced magnetization should be fully controllable. In this Letter, by focusing an azimuthally polarized vortex beam (APVB) and introducing an additional phase, a feasible strategy constructing subwavelength light-induced pure longitudinal multi-magnetization spots is proposed. In addition, the position of the multi-magnetization spots can be dynamically controlled. The distributions of the focused APVBs with different orbital angular momentum, and the induced magnetizations are surveyed. We believe that this is a practical and flexible three-dimensional magnetic recording technique with dynamic control of the recording position.