Automated artificial intelligence-based three-dimensional comparison of orthodontic treatment outcomes with and without piezocision surgery.

OBJECTIVE(S): This study aims to evaluate the influence of the piezocision surgery in the orthodontic biomechanics, as well as in the magnitude and direction of tooth movement in the mandibular arch using novel artificial intelligence (AI)-automated tools. MATERIALS AND METHODS: Nineteen patients, who had piezocision performed in the lower arch at the beginning of treatment with the goal of accelerating tooth movement, were compared to 19 patients who did not receive piezocision. Cone beam computed tomography (CBCT) and intraoral scans (IOS) were acquired before and after orthodontic treatment. AI-automated dental tools were used to segment and locate landmarks in dental crowns from IOS and root canals from CBCT scans to quantify 3D tooth movement. Differences in mesial-distal, buccolingual, intrusion and extrusion linear movements, as well as tooth long axis angulation and rotation were compared. RESULTS: The treatment time for the control and experimental groups were 13.2 ± 5.06 and 13 ± 5.52 months respectively (P = .176). Overall, anterior and posterior tooth movement presented similar 3D linear and angular changes in the groups. The piezocision group demonstrated greater (P = .01) mesial long axis angulation of lower right first premolar (4.4 ± 6°) compared with control group (0.02 ± 4.9°), while the mesial rotation was significantly smaller (P = .008) in the experimental group (0.5 ± 7.8°) than in the control (8.5 ± 9.8°) considering the same tooth. CONCLUSION: The open source-automated dental tools facilitated the clinicians' assessment of piezocision treatment outcomes. The piezocision surgery prior to the orthodontic treatment did not decrease the treatment time and did not influence in the orthodontic biomechanics, leading to similar tooth movements compared to conventional treatment.

Three-dimensional decision support system for treatment of canine impaction.

INTRODUCTION: This study aimed to develop a 3-dimensional (3D) characterization of the severity of maxillary impacted canines and to test the clinical performance of this characterization as a treatment decision support tool. METHODS: Cone-beam computed tomography images obtained from 83 patients with 120 impacted maxillary canines were included. Quantitative information on the canine 3D position and qualitative assessment of root damage of adjacent teeth were evaluated. A severity index was constructed on the basis of the quantitative findings. Clinical applicability was tested by comparing clinical diagnosis and treatment planning for conventional records vs the 3D characterization via a 2-part survey. RESULTS: The average quantitative assessments of impacted maxillary canine position were 6.4 ± 3.6 mm from the midsagittal plane, 11.6 ± 3.1 mm in height relative to the occlusal plane, 31.5° ± 18° of roll, and 48.8° ± 14.3° of pitch. The severity index ranged from 0-13 with a mean score of 4.5 ± 2.2. Overlap with adjacent teeth was the greatest contributor (33%) to the index. Bicortically impacted canines caused the most severe root damage. Cone-beam computed tomography was preferred for assessing root damage and overall severity, whereas conventional imaging was sufficient for height and angulation assessment. The 3D report was very important or important for evaluating root damage, canine position, overall severity, and overlap. The 3D report changed most of the decisions relating to biomechanics, patient education, and treatment time estimate. The decision of exposure and traction vs extraction was changed 22% of the time after the presentation of the 3D report. CONCLUSIONS: The overlap with adjacent teeth frequently contributes the most to the severity index. The 3D report provided relevant clinical information regarding the canine position, damage to adjacent teeth, and the severity index, with a profound impact on the decisions of the clinicians regarding biomechanics, patient education, and treatment time estimate.

Influence of nasal septum deviation on fluctuating asymmetries of the nasomaxillary complex: A cross-sectional study.

An important parameter in diagnostic analysis and treatment planning of different biological areas is facial symmetry, and several etiological factors have been attributed to skeletal facial asymmetry. Although causality cannot be determined, previous studies have reported a relationship between the anatomical deviation of the nasal septum and facial development. Diagnosis is critical for patients in growth stages due to the association between nasal septum deviation (NSD) and abnormal growth of the nasomaxillary complex. To understand this relationship, this study aimed to investigate the influence of nasal septum deviation on fluctuating asymmetries (FA) of the nasomaxillary complex at different stages of skeletal maturation. Another goal was to determine whether an association exists between the degrees of septal deviation severity and asymmetry of the nasomaxillary complex. This was a retrospective, cross-sectional observational study comprising 60 selected cone-beam computed tomography (CBCT) scans that were divided into four groups (n = 15) according to the degree of septal deviation and skeletal maturation: mild deviation (MD; <10°), moderate to severe deviation (MSD; ≥10°), early group (EG), and late group (LG). The angle and area of deviation were measured for the greatest NSD, and a geometric morphometric approach was used to evaluate the nasal septum (NS) shape. The morphology of the nasomaxillary complex and the presence of fluctuating asymmetries were evaluated using 23 two-dimensional landmarks on the nasomaxillary complex (nasal, lateral, and palatal regions) with Procrustes ANOVA and Mann-Whitney test. Additionally, Spearman's correlation and multivariate regression were used to correlate the NSD with asymmetries in these regions. No significant differences were observed in the Procrustes FA scores of the nasomaxillary complex between the MD-EG × MSD-EG and MD-LG × MSD-LG (p > 0.05). However, the results of the multivariate regression revealed more specific aspects of asymmetry (asymmetry component), there was a positive correlation between the NSD angle and the palatal regions (p = 0.035 and p = 0.047, middle and posterior, respectively), and the nasal septum shape and anterior palatal regions (p = 0.039). The nasal and lateral regions did not correlate with the NSD angle in the multivariate regression analysis (p > 0.05). The results of this study indicate that there were no significant differences in the fluctuating asymmetry of the nasomaxillary complex between the mild and moderate to severe nasal septum deviation groups, in both early and late skeletal maturation stages. However, a positive correlation was observed in the degree of nasal septum deviation angle and asymmetry components of the middle and posterior palatal regions, likewise between the nasal septum shape and asymmetry components of the anterior palatal region. The diagnosis of nasal septum deviation by both physicians and dentists is important, as a relationship was observed with fluctuating asymmetry component of the palatal region. This information can guide the decision of the treatment planning for these individuals, and should be considered, especially in cases of severe septum deviation, due to the great anatomical proximity of these structures.

Three-dimensional cone-beam computed technology evaluation of skeletal and dental changes in growing patients with Class II malocclusion treated with the cervical pull face-bow headgear appliance.

INTRODUCTION: This study aimed to 3-dimensionally quantify and compare the outcomes of growing patients with Class II malocclusion treated with the cervical pull face-bow headgear appliance in combination with full fixed orthodontic appliances. METHODS: The study sample consisted of 22 patients with Class II malocclusion with the following inclusion criteria: ANB >4.75°, Class II molar relationship, and SN-GoGn <37°. The mean age of patients was 12.5 ± 1.1 years at baseline. The average treatment time was 27.7 ± 7.3 months. Cone-beam computed tomography scans were superimposed in the cranial base, maxillary regional, and mandibular regional to evaluate growth, treatment displacements, and bone remodeling. RESULTS: Relevant statistically and clinically significant skeletal changes included average decreases in ANB (2.1 ± 1.1°) and SNA (1.8 ± 1.1°); posterior (1.3 ± 1.4 mm) and inferior (4.6 ± 2.2 mm) displacement of A-point; inferior displacements of B-point (5.4 ± 2.8 mm) and Pogonion (5.8 ± 2.6 mm); superior displacement of Condylion (6.9 ± 2.4 mm); increase in mandibular length (5.4 ± 2.0 mm); and clockwise rotation of palatal plane (1.9 ± 1.9°). Significant proclination of the maxillary incisors (9.8 ± 11.1°) and nonsignificant proclination of the mandibular incisors (4.7 ± 9.6°) were also noted. CONCLUSIONS: Class II skeletal correction was primarily achieved by posterior, inferior displacement of the sagittal position of the maxilla. Change in the sagittal position of the mandible/chin (B-point, Pogonion) was not significant; rather, mandibular displacement was significant in an inferior vertical direction without backward rotation, as seen from marked condylar and ramus growth.

Three-dimensional assessment of mandibular asymmetry in skeletal Class I and unilateral crossbite malocclusion in 3 different age groups.

INTRODUCTION: This study aimed to evaluate the morphologic and positional features of the mandible in children, adolescents, and adults with skeletal Class I and unilateral posterior crossbite. METHODS: The sample included cone-beam computerized tomography images of 76 subjects, divided in 3 groups: (1) children (aged 6.77 ± 1.5 years; n = 25), (2) adolescents (aged 14.3 ± 1.7 years; n = 26), and (3) adults (aged 32.66 ± 13.4 years; n = 25) with unilateral posterior crossbite. Condylar and mandibular linear distances and angles were performed using a mirrored 3-dimensional overlapped model. Intragroup asymmetries were determined by a comparison between crossbite and no crossbite sides. The differences between both sides of all measurements were compared among groups and correlated to mandibular horizontal rotation (yaw) and age. RESULTS: The crossbite side showed shorter distances in the condyle and mandibular regions. Asymmetries were slightly but significantly greater in adults, as expressed by the lateromedial condylar distance, total ramus height, and mandibular length with an average 0.7 mm, 2.0 mm, and 1.5 mm, respectively. The mandibular yaw rotation was not correlated to age but moderately associated (r = 0.467) to asymmetry in mandibular length and total ramus height. CONCLUSIONS: Patients with skeletal Class I and unilateral crossbite showed small mandibular asymmetries and these conditions were slightly greater in adults, specifically in lateromedial condylar distances and mandibular body and length.

Superimposition of maxillary digital models using the palatal rugae: Does ageing affect the reliability?

OBJECTIVES: The aim of this study was to evaluate the reliability of 3-dimensional maxillary dental changes using two methods of digital model superimposition. SETTING AND SAMPLE POPULATION: The Department of Orthodontics of Bauru Dental School, University of São Paulo and University of Michigan Craniofacial Growth Center. Fifteen subjects with normal occlusion. MATERIAL & METHODS: The sample was composed of digital study models of 15 normal occlusion subjects taken at 13 (T1), 18 (T2) and 60 years of age (T3). Using the software SlicerCMF 3.1, superimposition (registration) was conducted using 9 landmarks placed on the incisive papilla, second and third palatal rugae and 10 mm distal to the third palatal rugae. Two registration methods were compared: landmarks (LA) and regions of interest (ROI). Three-dimensional changes of landmarks on the buccal cusp tip of posterior teeth bilaterally and the incisal edge of the right central incisor were measured by three examiners. Intraclass correlation coefficients and Bland-Altman method evaluated intra- and inter-examiner agreements. RESULTS: Good or excellent intra-examiner agreement was found for T1-T2 and T2-T3 measurements using both registration methods. Inter-examiner agreements were good to excellent for T1-T2 measurements and poor to fair for most T2-T3 measurements. Mean T1-T2 differences were less than 0.5 mm for most measurements. CONCLUSION: Maxillary digital dental models of patients with normal occlusion superimposed on palatal rugae showed an adequate reliability for a 5-year interval comparison using landmarks or regions of interest. Lower than acceptable reproducibility using both superimposition methods was found for a 40-year interval comparison.

BMP2 rs1005464 is associated with mandibular condyle size variation.

This study aimed to evaluate the association between single nucleotide polymorphisms (SNPs) in endochondral development-related genes and mandibular condyle shape, size, volume, and symmetry traits. Cone-beam Computed Tomographies and genomic DNA from 118 individuals were evaluated (age range: 15-66 years). Data from twelve 3D landmarks on mandibular condyles were submitted to morphometric analyses including Procrustes fit, principal component analysis, and estimation of centroid sizes and fluctuating asymmetry scores. Condylar volumes were additionally measured. Seven SNPs across BMP2, BMP4, RUNX2 and SMAD6 were genotyped. Linear models were fit to evaluate the effect of the SNPs on the mandibular condyles' quantitative traits. Only the association between BMP2 rs1005464 and centroid size remained significant after adjusting to account for the false discovery rate due to multiple testing. Individuals carrying at least one A allele for this SNP showed larger condylar size than common homozygotes GG (ß = 0.043; 95% CI: 0.014-0.071; P value = 0.028). The model including BMP2 rs1005464, age and sex of the participants explained 17% of the variation in condylar size. Shape, volume, and symmetry were not associated with the evaluated SNPs. These results suggest that BMP2 rs1005464 might be associated with variation in the mandibular condyles size.

Clear aligner mandibular advancement in growing patients with Class II malocclusion.

Treatment effects occurring during Class II malocclusion treatment with the clear aligner mandibular advancement protocol were evaluated in two growing patients: one male (12 years, 3 months) and one female (11 years, 9 months). Both patients presented with full cusp Class II molar and canine relationships. Intraoral scans and cone-beam computed tomography were acquired before treatment and after mandibular advancement. Three-dimensional skeletal and dental long-axis changes were quantified, in which the dental long axis was determined by registering the dental crowns obtained from intraoral scans to the root canals in cone-beam computed tomography scans obtained at the same time points. Class II correction was achieved by a combination of mandibular skeletal and dental changes. A similar direction of skeletal and dental changes was observed in both patients, with downward and forward displacement of the mandible resulting from the growth of the mandibular condyle and ramus. Dental changes in both patients included mesialization of the mandibular posterior teeth with flaring of mandibular anterior teeth. In these two patients, clear aligner mandibular advancement was an effective treatment modality for Class II malocclusion correction with skeletal and dental effects and facial profile improvement.

Prevalence of mandibular asymmetry in different skeletal sagittal patterns.

OBJECTIVES: To analyze the prevalence of mandibular asymmetry in skeletal sagittal malocclusions. MATERIALS AND METHODS: PubMed/MEDLINE, EMBASE, LILACS, Web of Science, Scopus, LIVIVO and gray literature (OpenGrey, ProQuest, and Google Scholar) were electronically searched. Two independent investigators selected the eligible studies, and assessed risk of bias and certainty of evidence (GRADE). One reviewer independently extracted the data and the second reviewer checked this information. Any disagreement between the reviewers in each phase was resolved by discussion between them and/or involved a third reviewer for final decision. RESULTS: Electronic search identified 5,132 studies, and 5 observational studies were included. Risk of bias was low in two studies, moderate in one, and high in two. The studies showed high heterogeneity. Mandibular asymmetry ranged from 17.43% to 72.95% in overall samples. Horizontal chin deviation showed a prevalence of 17.66% to 55.6% asymmetry in Class I malocclusions, and 68.98% in vertical asymmetry index. In Class II patients, prevalence of mandibular asymmetry varied from 10% to 25.5% in horizontal chin deviation, and 71.7% in vertical asymmetry index. The Class III sample showed a prevalence of mandibular asymmetry ranging from 22.93% to 78% in horizontal chin deviation and 80.4% in vertical asymmetry index. Patients seeking orthodontic or orthognathic surgery treatment showed greater prevalence of mandibular asymmetry. CONCLUSIONS: Skeletal Class III malocclusion showed the greatest prevalence of mandibular asymmetry. Mandibular vertical asymmetry showed a marked prevalence in all malocclusions. However, conclusions should be interpreted with caution due to use of convenience samples and low-quality study outcomes.

Natural changes of the maxillary first molars in adolescents with skeletal Class II malocclusion.

INTRODUCTION: The objective of this study was to evaluate natural changes in maxillary posterior alveolar height (MPAH) and axial inclination of the maxillary first molars (AIMFM) in subjects with Class II malocclusion to determine the validity of predictive equations. METHODS: Longitudinal records of 30 untreated white subjects (13 girls, 17 boys) with skeletal Class II malocclusion were collected at ages 9, 12, 14, and 16 years. They had participated in the Burlington Growth Centre study, and cephalograms were analyzed with Dentofacial Planner Plus software (version 2.0, Dentofacial Planner, Toronto, Ontario, Canada). Serial means were compared with the Bonferroni post-hoc test (P <0.05). Predictive equations were obtained and studied with the analysis of agreement. RESULTS: Gradually, means of MPAH had statistical increments with sexual dimorphism from 14 to 16 years of age. A distal mean of AIMFM was found at 9 years of age that decreased significantly during growth, with sexual dimorphism between the ages of 9 and 12 years. Changes in AIMFM varied among subjects in distinct stages. Values of MPAH were predicted with high validity at intervals of 3 years or longer, whereas estimations for AIMFM were unreliable. CONCLUSIONS: In this study group, there was significant alveolar growth, with a natural tendency to upright the distal inclination at the maxillary first molars.

Osteoarthritis of the Temporomandibular Joint can be diagnosed earlier using biomarkers and machine learning.

After chronic low back pain, Temporomandibular Joint (TMJ) disorders are the second most common musculoskeletal condition affecting 5 to 12% of the population, with an annual health cost estimated at $4 billion. Chronic disability in TMJ osteoarthritis (OA) increases with aging, and the main goal is to diagnosis before morphological degeneration occurs. Here, we address this challenge using advanced data science to capture, process and analyze 52 clinical, biological and high-resolution CBCT (radiomics) markers from TMJ OA patients and controls. We tested the diagnostic performance of four machine learning models: Logistic Regression, Random Forest, LightGBM, XGBoost. Headaches, Range of mouth opening without pain, Energy, Haralick Correlation, Entropy and interactions of TGF-ß1 in Saliva and Headaches, VE-cadherin in Serum and Angiogenin in Saliva, VE-cadherin in Saliva and Headaches, PA1 in Saliva and Headaches, PA1 in Saliva and Range of mouth opening without pain; Gender and Muscle Soreness; Short Run Low Grey Level Emphasis and Headaches, Inverse Difference Moment and Trabecular Separation accurately diagnose early stages of this clinical condition. Our results show the XGBoost + LightGBM model with these features and interactions achieves the accuracy of 0.823, AUC 0.870, and F1-score 0.823 to diagnose the TMJ OA status. Thus, we expect to boost future studies into osteoarthritis patient-specific therapeutic interventions, and thereby improve the health of articular joints.

3D Slicer Craniomaxillofacial Modules Support Patient-Specific Decision-Making for Personalized Healthcare in Dental Research.

The biggest challenge to improve the diagnosis and therapies of Craniomaxillofacial conditions is to translate algorithms and software developments towards the creation of holistic patient models. A complete picture of the individual patient for treatment planning and personalized healthcare requires a compilation of clinician-friendly algorithms to provide minimally invasive diagnostic techniques with multimodal image integration and analysis. We describe here the implementation of the open-source Craniomaxillofacial module of the 3D Slicer software, as well as its clinical applications. This paper proposes data management approaches for multisource data extraction, registration, visualization, and quantification. These applications integrate medical images with clinical and biological data analytics, user studies, and other heterogeneous data.

Transposition of a canine to the extraction site of a dilacerated maxillary central incisor.

This article describes the treatment of a girl in whom anterior trauma during the deciduous dentition had caused a dilacerated maxillary central incisor in the mixed dentition. The dilacerated central incisor was extracted, and a canine was transposed to the extraction site. Canine transposition was performed so that the lateral incisor could be maintained in its normal position. This article discusses the clinical implications of dental dilacerations on orthodontic treatment and the treatment possibilities.

Shear bond strength of brackets bonded to enamel with a self-etching primer. Effects of increasing storage time after activation.

OBJECTIVE: To evaluate bonding efficacy of activated Transbond Plus Self-Etching Primer (TPSEP) used at different time points with Transbond XT to bond metallic orthodontic brackets to bovine incisors. MATERIALS AND METHODS: The inferior incisors of 210 bovines were randomly divided into seven groups (n = 30). TPSEPs were mixed, activated, and kept activated for 30 (group 30), 21 (group 21), 15 (group 15), 7 (group 7), 3 (group 3), or 1 (group 1) days before bonding, and in one group (group 0) TPSEP was used immediately after mixed. At day zero, incisors in each group were bonded in exactly the same way. After applying TPSEP, brackets were bonded with Transbond XT, according to the manufacturer's instructions. After 24 hours, shear bond strength (SBS) tests were performed for all samples at a crosshead speed of 0.5 mm/min, and the Adhesive Remnant Index was scored. RESULTS: There were no significant differences between the SBS of groups 0, 1, 3, 7, and 15 (P > .05) However, those groups had higher SBS (P < .05) compared with groups 21 and 30. No significant difference (P > .05) was observed between groups 21 and 30. Despite the decrease in SBS for groups 21 and 30, bond strength values were still satisfactory. CONCLUSION: After activation, the TPSEP mix can be stored for a period of 15 days without losing its adhesive properties.

Long-term maxillary changes in patients with skeletal Class II malocclusion treated with slow and rapid palatal expansion.

INTRODUCTION: In this study, we evaluated the long-term maxillary changes in skeletal Class II patients who had slow and rapid palatal expansion. METHODS: The sample consisted of 70 patients divided in 2 groups: 1 group was treated with cervical headgear with expanded inner bow (CHG) and the other with a Haas-type rapid palatal expansion appliance with cervical headgear (RPE-CHG). Data were collected in the molar and canine regions for basal width, alveolar width, and palatal depth at pretreatment (T1), posttreatment (T2), and postretention (T3). The Student paired t test was used to compare data and independent averages between phases. RESULTS: In both groups, from T1 to T2, there were significant increases in basal width, alveolar width, and palatal depth for the molar region; in the canine region, there was a significant increase only in the alveolar width. From T2 to T3, no significant changes were found for basal and alveolar widths in both groups and regions, but a significant increase was seen in palatal depth in the molar region in the RPE-CHG group. CONCLUSIONS: Slow and rapid palatal expansion can expand the maxillae and the maxillary teeth in skeletal Class II patients. Rapid palatal expansion was efficient in the treatment of skeletal Class II patients with severe transverse maxillary discrepancy. Skeletal Class II correction with slow and rapid palatal expansion produced long-term stability (10 years after orthodontic treatment).

Three-dimensional assessment of the middle cranial fossa and central skull base following Herbst appliance treatment.

OBJECTIVES:: The purpose of this three-dimensional (3D) study was to assess retrospectively the middle cranial fossa and central skull base of patients treated with the Herbst appliance (HA). MATERIALS AND METHODS:: 3D surface virtual models of 40 Class II, division 1 malocclusion patients were generated from cone-beam computed tomography (CBCT) acquired before treatment (T0) and after 8 months of HA treatment (T1). T0 and T1 3D models were superimposed volumetrically at the anterior cranial fossa. Twenty subjects who had been treated with the Herbst appliance (HAG) were compared to 20 subjects who were not treated orthopedically. The latter group served as a comparison control group (CG). Quantitative assessments of the location and directional changes were made with linear and angular measurements between anatomical landmarks. Qualitative assessments of the spatial behavior of the middle cranial fossa and central skull base relative to the anterior cranial fossa were displayed graphically for visualization with color maps and semitransparent overlays. Non-parametric tests were performed to compare the between the HAG and CG. RESULTS:: Point-to-point linear measurements and skeletal rotation (pitch, roll, and yaw) changes were very small along the observational period and were not significantly different between HAG and CG. Visual analysis of color maps and overlays confirmed that no changes in the cranial base were associated with HA. CONCLUSIONS:: HA therapy did not produce clinically significant changes in the middle cranial fossa and central skull base.

Three-dimensional dental and craniofacial manifestations in patients with late diagnosis of mucopolysaccharidosis type II: report of 2 cases.

The objective of this study was to report the clinical evaluation results and 3-dimensional (3-D) dental and craniofacial characteristics observed in 2 male patients with mucopolysaccharidosis type II. The patients were evaluated clinically (soft tissue evaluation, evaluation of occlusion, periodontal and dental examinations) and by using craniofacial computed tomography, with evaluation of 3-D images in ITK-Snap v. 2.2 (Penn Image Computing and Science Laboratory, Philadelphia, PA; http://www.itksnap.org/) and 3-D Slicer (http://www.slicer.org/) software. Mandibular 3-D volumetric label maps were built from computed tomography scans of both patients and compared through superimposition on a healthy patient's mandibular images. Clinically, the patients presented the following oral manifestations: macroglossia, total open bite and generalized diastemas, and absence of caries. Patient 1 showed dental calculus and bleeding at the gingival margin. Patient 2 showed bleeding at the gingival margin, a permanent maxillary left central incisor missing as a result of trauma, and impacted permanent mandibular left and right second molars. 3-D images showed wide arches, prominent antegonial notches, a narrow mandibular body in the region of the antegonial notches, bilateral severe condylar hypoplasia, and enlarged coronoid processes. 3-D imaging and superimpositions revealed oral and skeletal displacements, contributing to the identification of changes in the course of mucopolysaccharidosis type II in patients with a late diagnosis.

Mandibular permanent first molar and incisor width as predictor of mandibular canine and premolar width.

INTRODUCTION: Estimating the mesiodistal widths of unerupted permanent canines and premolars is an essential aspect of mixed dentition analysis. Several methods are used to predict tooth width. The best methods demonstrate high values of correlation and determination coefficients. In this study, we aimed to determine a linear regression equation that would predict the sum of the mesiodistal widths of mandibular permanent canines and premolars based on the sum of the widths of the 4 mandibular permanent incisors and first permanent molars. METHODS: The sample consisted of 500 dental casts, obtained from white Brazilian patients (250 male, 250 female; average ages, 13.8 and 14.4 years, respectively). Mesiodistal tooth widths were measured with an electronic digital caliper. Intraclass correlation coefficients were used to determine measurement consistencies. Paired and unpaired Student t tests were used to determine right/left side and sex differences, respectively. A paired Student t test was also used to compare the predicted and actual sums of the mandibular permanent canines and premolars. RESULTS: We found high values of correlation (r) and determination (r2) coefficients, varying from r = 0.795 to r = 0.81, and r2 = 0.599 to r2 = 0.656. These values are among the highest described in the literature for nonradiographic prediction methods. On average, there was no difference between predicted and actual widths of the mandibular permanent canines and premolars, and the standard errors of estimation were 1.49 mm for males, 1.36 mm for females, and 1.44 mm for the total sample (considering right and left sides of the mandibular arch together). CONCLUSIONS: The proposed method showed good accuracy and was easy to use, but it must be tested in other populations.

Mandibular behavior with slow and rapid maxillary expansion in skeletal Class II patients: a long-term study.

OBJECTIVE: To evaluate anteroposterior and vertical mandibular changes in skeletal Class II patients treated with slow or rapid maxillary expansions at 10-year follow-up. MATERIALS AND METHODS: The sample consisted of 70 patients divided into two groups, treated with (1) a cervical headgear (CHG) with expansion of the inner bow or (2) a Haas-type rapid maxillary expansion (RME) appliance in conjunction with CHG (RME-CHG). The CHG group consisted of 40 patients (18 males and 22 females, with an average age of 10.6 years at pretreatment [T(1)], 13.6 years at posttreatment [T(2)], and 23.6 years at postretention [T(3)]), and the RME-CHG group consisted of 30 patients (14 males and 16 females with an average age of 10.4 years at T(1), 14.0 years at T(2), and 24.6 years at T(3)). RESULTS: The profiles of SNB, B-Hor, and Pog-Hor showed significant increases for all treatment phases in both groups. The SN-Go-Gn angle showed no significant decrease from T(1) to T(2) and a significant decrease from T(2) to T(3). CONCLUSIONS: For the entire sample (CHG + RME-CHG) the profile analysis between the phases showed mean increases in B-Ver and Pog-Ver for both phases.

Microbiological evaluation of elastomeric chains.

OBJECTIVES: To evaluate in vitro the surface of elastomeric chains of different manufacturers to verify the presence of pathogenic microorganisms at the moment of unpacking and analyze a possible inhibitory effect of the elastomeric chain when exposed to microorganisms of the oral cavity, for example, Streptococcus mutans, Lactobacillus casei, and Candida albicans. MATERIALS AND METHODS: Elastomeric chains from Ortho-Organizers Inc, 3M Unitek, and Dental Morelli were placed in petri plates with brain heart infusion agar medium and in sterile test tubes with brain heart infusion broth. The samples were incubated at 37 degrees C and analyzed at 24 hours, 48 hours, 3 days, and 7 days. In addition, elastomeric chains from the three manufacturers were placed in dishes, inoculated with microorganisms, incubated at 37 degrees C, and analyzed after 24 and 72 hours. RESULTS: No microorganism growth was detected after all incubation periods. No inhibition zones were identified surrounding the elastomeric chain. CONCLUSIONS: The results suggest that the fabrication of elastomeric chain is in accordance with biohazard concepts. However, careful manipulation is necessary to avoid colonization of pathogenic microorganisms since the composition of the elastomeric chains analyzed do not include antimicrobial agents.