RESUMO
Optical absorption and confocal fluorescence micro-spectroscopy were applied to investigate Brønsted acidity in millimetre-sized extrudates of Na(H)-ZSM-5 and SiO2 with varying ZSM-5 content. Partially (residual Na present) and fully proton-exchanged extrudates were employed, using thiophene oligomerization as a probe reaction. Time-resolved in situ optical absorption spectra and time dependent DFT calculations revealed several initial reaction pathways during the oligomerization reaction. In particular, it was found that protonated thiophene monomers reacted by either oligomerization (via reaction with un-reacted thiophene monomers) or ring-opening, depending on the Brønsted acid site density in each sample. Moreover, fully-exchanged extrudates not only have significantly higher reactivity than partially-exchanged samples, but they also favour the formation of ring-opening products, that are not formed on the partially-exchanged samples. Confocal fluorescence microscopy was employed to visualise non-invasively in 3D, the heterogeneity and homogeneity of thiophene oligomers on partially- and fully-exchanged extrudates, respectively. Furthermore, it was observed that extrudates with high binder content produce a higher relative amount of conjugated species, related with a higher quantity of available monomer in the binder, which is able to react further with intermediates adsorbed on active sites. Moreover, these conjugated species appear to form near the external surface of ZSM-5 crystals/agglomerates.
RESUMO
The modern chemical industry uses heterogeneous catalysts in almost every production process. They commonly consist of nanometre-size active components (typically metals or metal oxides) dispersed on a high-surface-area solid support, with performance depending on the catalysts' nanometre-size features and on interactions involving the active components, the support and the reactant and product molecules. To gain insight into the mechanisms of heterogeneous catalysts, which could guide the design of improved or novel catalysts, it is thus necessary to have a detailed characterization of the physicochemical composition of heterogeneous catalysts in their working state at the nanometre scale. Scanning probe microscopy methods have been used to study inorganic catalyst phases at subnanometre resolution, but detailed chemical information of the materials in their working state is often difficult to obtain. By contrast, optical microspectroscopic approaches offer much flexibility for in situ chemical characterization; however, this comes at the expense of limited spatial resolution. A recent development promising high spatial resolution and chemical characterization capabilities is scanning transmission X-ray microscopy, which has been used in a proof-of-principle study to characterize a solid catalyst. Here we show that when adapting a nanoreactor specially designed for high-resolution electron microscopy, scanning transmission X-ray microscopy can be used at atmospheric pressure and up to 350 degrees C to monitor in situ phase changes in a complex iron-based Fisher-Tropsch catalyst and the nature and location of carbon species produced. We expect that our system, which is capable of operating up to 500 degrees C, will open new opportunities for nanometre-resolution imaging of a range of important chemical processes taking place on solids in gaseous or liquid environments.
RESUMO
Self-assembled colloidal crystals have attracted major attention because of their potential as low-cost three-dimensional (3D) photonic crystals. Although a high degree of perfection is crucial for the properties of these materials, little is known about their exact structure and internal defects. In this study, we use tomographic scanning transmission X-ray microscopy (STXM) to access the internal structure of self-assembled colloidal photonic crystals with high spatial resolution in three dimensions for the first time. The positions of individual particles of 236 nm in diameter are identified in three dimensions, and the local crystal structure is revealed. Through image analysis, structural defects, such as vacancies and stacking faults, are identified. Tomographic STXM is shown to be an attractive and complementary imaging tool for photonic materials and other strongly absorbing or scattering materials that cannot be characterized by either transmission or scanning electron microscopy or optical nanoscopy.
RESUMO
Photonic crystals consisting of nano- to micrometer-sized building blocks, such as multiple sorts of colloids, have recently received widespread attention. It remains a challenge, however, to adequately probe the internal crystal structure and the corresponding deformations that inhibit the proper functioning of such materials. It is shown that scanning transmission X-ray microscopy (STXM) can directly reveal the local structure, orientations, and even deformations in polystyrene and silica colloidal crystals with 30-nm spatial resolution. Moreover, STXM is capable of imaging a diverse range of crystals, including those that are dry and inverted, and provides novel insights complementary to information obtained by benchmark confocal fluorescence and scanning electron microscopy techniques.
Assuntos
Coloides/química , Microscopia Eletrônica de Transmissão e Varredura/métodos , CristalizaçãoRESUMO
The stability and reactivity of ϵ, χ, and θ iron carbide phases in Fischer-Tropsch synthesis (FTS) catalysts as a function of relevant reaction conditions was investigated by a synergistic combination of experimental and theoretical methods. Combined in situ X-ray Absorption Fine Structure Spectroscopy/X-ray Diffraction/Raman Spectroscopy was applied to study Fe-based catalysts during pretreatment and, for the first time, at relevant high pressure Fischer-Tropsch synthesis conditions, while Density Functional Theory calculations formed a fundamental basis for understanding the influence of pretreatment and FTS conditions on the formation of bulk iron carbide phases. By combining theory and experiment, it was found that the formation of θ-Fe(3)C, χ-Fe(5)C(2), and ϵ-carbides can be explained by their relative thermodynamic stability as imposed by gas phase composition and temperature. Furthermore, it was shown that a significant part of the Fe phases was present as amorphous carbide phases during high pressure FTS, sometimes in an equivalent amount to the crystalline iron carbide fraction. A catalyst containing mainly crystalline χ-Fe(5)C(2) was highly susceptible to oxidation during FTS conditions, while a catalyst containing θ-Fe(3)C and amorphous carbide phases showed a lower activity and selectivity, mainly due to the buildup of carbonaceous deposits on the catalyst surface, suggesting that amorphous phases and the resulting textural properties play an important role in determining final catalyst performance. The findings further uncovered the thermodynamic and kinetic factors inducing the ϵ-χ-θ carbide transformation as a function of the carbon chemical potential µ(C).
Assuntos
Compostos Inorgânicos de Carbono/química , Compostos de Ferro/química , Catálise , Análise Espectral/métodos , Termodinâmica , Difração de Raios XRESUMO
The present status of in-situ scanning transmission X-ray microscopy (STXM) is reviewed, with an emphasis on the abilities of the STXM technique in comparison with electron microscopy. The experimental aspects and interpretation of X-ray absorption spectroscopy (XAS) are briefly introduced and the experimental boundary conditions that determine the potential applications for in-situ XAS and in-situ STXM studies are discussed. Nanoscale chemical imaging of catalysts under working conditions is outlined using cobalt and iron Fischer-Tropsch catalysts as showcases. In the discussion, we critically compare STXM-XAS and STEM-EELS (scanning transmission electron microscopy-electron energy loss spectroscopy) measurements and indicate some future directions of in-situ nanoscale imaging of catalytic solids and related nanomaterials.
RESUMO
The effect of Cu on the reduction behavior and surface properties of supported and unsupported Fe-based Fischer-Tropsch synthesis (FTS) catalysts was investigated using in situ X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) in combination with ex situ bulk characterization. During exposure to 0.4 mbar CO-H(2) above 180 degrees C, the reduction of CuO to Cu(0) marked the onset of the reduction of Fe(3)O(4) to alpha-Fe. The promotion effects of Cu are explained by a combination of spillover of H(2) and/or CO molecules from metallic Cu(0) nuclei to closely associated iron oxide species and textural promotion. XAS showed that in the supported catalyst, Cu(+) and Fe(2+) species were stabilized by SiO(2) and, as a result, Fe species were not reduced significantly beyond Fe(3)O(4) and Fe(2+), even after treatment at 350 degrees C. After the reduction treatment, XPS showed that the concentration of oxygen and carbon surface species was higher in the presence of Cu. Furthermore, it was observed that the unsupported, Cu-containing catalyst showed higher CO(2) concentration in the product gas stream during and after reduction and Fe surface species were slightly oxidized after prolonged exposure to CO-H(2). These observations suggest that, in addition to facilitating the reduction of the iron oxide phase, Cu also plays a direct role in altering the surface chemistry of Fe-based FTS catalysts.
RESUMO
A closer look: Investigation of the reduction properties of a single Fischer-Tropsch catalyst particle, using in situ scanning transmission X-ray microscopy with spatial resolution of 35 nm, reveals a heterogeneous distribution of Fe(0), Fe(2+), and Fe(3+) species. Regions of different reduction properties are defined and explained on the basis of local chemical interactions and catalyst morphology.
RESUMO
Microspectroscopic methods were explored to investigate binder effects occurring in ZSM-5-containing SiO2- and Al2O3-bound millimetre-sized extrudates. Using thiophene as a selective probe for Brønsted acidity, coupled with time-resolved in situ UV/Vis and confocal fluorescence microspectroscopy, variations in reactivity and selectivity between the two distinct binder types were established. It was found that aluminium migration occurs in ZSM-5-containing Al2O3-bound extrudates, forming additional Brønsted acid sites. These sites strongly influence the oligomer selectivity, favouring the formation of thiol-like species (i.e., ring-opened species) in contrast to higher oligomers, predominantly formed on SiO2-bound ZSM-5-containing extrudates. Not only were the location and distribution of these oligomers visualised by 3 D analysis, it was also observed that more conjugated species appeared to grow off the surface of the zeolite ZSM-5 crystals (containing less conjugated species) into the surrounding binder material. Furthermore, a higher binder content resulted in an increasing overall reactivity owing to the greater number of stored thiophene monomers available per Brønsted acid site.
RESUMO
Iron-based Fischer-Tropsch catalysts, which are applied in the conversion of CO and H2 into longer hydrocarbon chains, are historically amongst the most intensively studied systems in heterogeneous catalysis. Despite this, fundamental understanding of the complex and dynamic chemistry of the iron-carbon-oxygen system and its implications for the rapid deactivation of the iron-based catalysts is still a developing field. Fischer-Tropsch catalysis is characterized by its multidisciplinary nature and therefore deals with a wide variety of fundamental chemical and physical problems. This critical review will summarize the current state of knowledge of the underlying mechanisms for the activation and eventual deactivation of iron-based Fischer-Tropsch catalysts and suggest systematic approaches for relating chemical identity to performance in next generation iron-based catalyst systems (210 references).