Mechanical loading of joint modulates T cells in lymph nodes to regulate osteoarthritis.

OBJECTIVE: The crosstalk of joint pathology with local lymph nodes in osteoarthritis (OA) is poorly understood. We characterized the change in T cells in lymph nodes following load-induced OA and established the association of the presence and migration of T cells to the onset and progression of OA. METHODS: We used an in vivo model of OA to induce mechanical load-induced joint damage. After cyclic tibial compression of mice, we analyzed lymph nodes for T cells using flow cytometry and joint pathology using histology and microcomputed tomography. The role of T-cell migration and the presence of T-cell type was examined using T-cell receptor (TCR)α-/- mice and an immunomodulatory drug, Sphingosine-1-phosphate (S1P) receptor inhibitor-treated mice, respectively. RESULTS: We demonstrated a significant increase in T-cell populations in local lymph nodes in response to joint injury in 10, 16, and 26-week-old mice, and as a function of load duration, 1, 2, and 6 weeks. T-cell expression of inflammatory cytokine markers increased in the local lymph nodes and was associated with load-induced OA progression in the mouse knee. Joint loading in TCRα-/- mice reduced both cartilage degeneration (Osteoarthritis Research Society International (OARSI) scores: TCRα 0.568, 0.981-0.329 confidence interval (CI); wild type (WT) 1.328, 2.353-0.749 CI) and osteophyte formation. Inhibition of T-cell egress from lymph nodes attenuated load-induced cartilage degradation (OARSI scores: Fingolimod: 0.509, 1.821-0.142 CI; Saline 1.210, 1.932-0.758 CI) and decreased localization of T cells in the synovium. CONCLUSIONS: These results establish the association of lymph node-resident T cells in joint damage and suggest that the S1P receptor modulators and T-cell immunotherapies could be used to treat OA.

Mechanobiological Mechanisms of Load-Induced Osteoarthritis in the Mouse Knee.

Osteoarthritis (OA) is a degenerative joint disease that affects millions of people worldwide, yet its disease mechanism is not clearly understood. Animal models have been established to study disease progression by initiating OA through modified joint mechanics or altered biological activity within the joint. However, animal models often do not have the capability to directly relate the mechanical environment to joint damage. This review focuses on a novel in vivo approach based on controlled, cyclic tibial compression to induce OA in the mouse knee. First, we discuss the development of the load-induced OA model, its different loading configurations, and other techniques used by research laboratories around the world. Next, we review the lessons learned regarding the mechanobiological mechanisms of load-induced OA and relate these findings to the current understanding of the disease. Then, we discuss the role of specific genetic and cellular pathways involved in load-induced OA progression and the contribution of altered tissue properties to the joint response to mechanical loading. Finally, we propose using this approach to test the therapeutic efficacy of novel treatment strategies for OA. Ultimately, elucidating the mechanobiological mechanisms of load-induced OA will aid in developing targeted treatments for this disabling disease.

Effect of the Proximal Abducting Ulnar Osteotomy on Intra-Articular Pressure Distribution and Contact Mechanics of Congruent and Incongruent Canine Elbows Ex Vivo.

OBJECTIVE: To determine the effects of the Proximal Abducting Ulnar Osteotomy (PAUL) on contact pressures of congruent and incongruent (short radius) canine elbows. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Unpaired normal cadaveric canine forelimbs (n=16). METHODS: A servohydraulic testing frame and thin-film sensors were utilized to measure intra-articular contact area (CA), mean contact pressure (mCP), and peak contact pressure (pCP) for medial and lateral elbow compartments. Percent contribution of the medial compartment relative to the whole (%Med) was also examined. Baseline data were collected in 9 congruent elbows and 7 incongruent elbows where the radius was shortened. Both sets of elbows were tested following ulnar osteotomy and sequential placement of 2 and 3 mm PAUL plates and paw repositioning (to account for any medial to lateral shift of transarticular forces). Paired t-tests compared sequential procedural steps. P<.05 was significant. RESULTS: For congruent elbows, the 2 mm PAUL plate decreased CA in both compartments compared to baseline; lateral pCP increased with subsequent paw repositioning. Induction of radio-ulnar incongruity decreased CA and increased mCP medially, decreased pCP laterally, and increased %MedCA and %MedmCP compared to baseline. Both PAUL plates decreased mCP and pCP medially, with no effect laterally. Paw repositioning had no effect. CONCLUSION: The PAUL procedure had no effect on medial compartment pressure in the congruent elbow. It may ameliorate increased medial compartment pressure in the incongruent elbow. This change does not result from a medial to lateral compartmental shift and deserves further investigation.

Reduced tissue-level stiffness and mineralization in osteoporotic cancellous bone.

Osteoporosis alters bone mass and composition ultimately increasing the fragility of primarily cancellous skeletal sites; however, effects of osteoporosis on tissue-level mechanical properties of cancellous bone are unknown. Dual-energy X-ray absorptiometry (DXA) scans are the clinical standard for diagnosing osteoporosis though changes in cancellous bone mass and mineralization are difficult to separate using this method. The goal of this study was to investigate possible difference in tissue-level properties with osteoporosis as defined by donor T scores. Spine segments from Caucasian female cadavers (58-92 years) were used. A T score for each donor was calculated from DXA scans to determine osteoporotic status. Tissue-level composition and mechanical properties of vertebrae adjacent to the scan region were measured using nanoindentation and Raman spectroscopy. Based on T scores, six samples were in the Osteoporotic group (58-74 years) and four samples were in the Not Osteoporotic group (65-92 years). The indentation modulus and mineral to matrix ratio (mineral:matrix) were lower in the Osteoporotic group than the Not Osteoporotic group. Mineral:matrix ratio decreased with age (r (2) = 0.35, p = 0.05), and the indentation modulus increased with areal bone mineral density (r (2) = 0.41, p = 0.04). This study is the first to examine cancellous bone composition and mechanical properties from a fracture prone location with osteoporosis. We found differences in tissue composition and mechanical properties with osteoporosis that could contribute to increased fragility in addition to changes in trabecular architecture and bone volume.

Load-induced changes in bone stiffness and cancellous and cortical bone mass following tibial compression diminish with age in female mice.

The vertebrate skeleton is an adaptive structure that responds to mechanical stimuli by increasing bone mass under increased mechanical loads. Although experimental animal models have shown the anabolic cortical bone response to applied load decreases with age, no consensus exists regarding whether this adaptive mechanism is affected by age in cancellous bone, the tissue most impacted by age-related bone loss. We used an established murine in vivo tibial loading model to characterize the load-induced cancellous, cortical and whole-bone responses to mechanical stimuli in growing and mature female mice at 6, 10 and 16 weeks of age. The effects of applied load on tibial morphology and stiffness were determined using microcomputed tomography and in vivo bone strains measured at the medial tibial midshaft during applied loading. At all ages, 2 weeks of applied load produced larger midshaft cortical cross-sectional properties (+13-72%) and greater cancellous bone volume (+21-107%) and thicker trabeculae (+31-68%) in the proximal metaphyses of the loaded tibiae. The relative anabolic response decreased from 6 to 16 weeks of age in both the cancellous and cortical envelopes. Load-induced tibial stresses decreased more in 6-week-old mice following loading, which corresponded to increased in vivo tibial stiffness. Stiffness in the loaded tibiae of 16-week-old mice decreased despite moderately increased cortical cross-sectional geometry, suggesting load-induced changes in bone material properties. This study shows that the cancellous and cortical anabolic responses to mechanical stimuli decline with age into adulthood and that cortical cross-sectional geometry alone does not necessarily predict whole-bone functional stiffness.

In vivo cyclic compression causes cartilage degeneration and subchondral bone changes in mouse tibiae.

OBJECTIVE: Alterations in the mechanical loading environment in joints may have both beneficial and detrimental effects on articular cartilage and subchondral bone, and may subsequently influence the development of osteoarthritis (OA). Using an in vivo tibial loading model, the aim of this study was to investigate the adaptive responses of cartilage and bone to mechanical loading and to assess the influence of load level and duration. METHODS: Cyclic compression at peak loads of 4.5N and 9.0N was applied to the left tibial knee joint of adult (26-week-old) C57BL/6 male mice for 1, 2, and 6 weeks. Only 9.0N loading was utilized in young (10-week-old) mice. Changes in articular cartilage and subchondral bone were analyzed by histology and micro-computed tomography. RESULTS: Mechanical loading promoted cartilage damage in both age groups of mice, and the severity of joint damage increased with longer duration of loading. Metaphyseal bone mass increased with loading in young mice, but not in adult mice, whereas epiphyseal cancellous bone mass decreased with loading in both young and adult mice. In both age groups, articular cartilage thickness decreased, and subchondral cortical bone thickness increased in the posterior tibial plateau. Mice in both age groups developed periarticular osteophytes at the tibial plateau in response to the 9.0N load, but no osteophyte formation occurred in adult mice subjected to 4.5N peak loading. CONCLUSION: This noninvasive loading model permits dissection of temporal and topographic changes in cartilage and bone and will enable investigation of the efficacy of treatment interventions targeting joint biomechanics or biologic events that promote OA onset and progression.

Effect of ulnar ostectomy on intra-articular pressure mapping and contact mechanics of the congruent and incongruent canine elbow ex vivo.

OBJECTIVE: To determine (1) the effect of elbow incongruity on contact mechanics and (2) the effect of treatment of this incongruity with 1 of 2 ulnar ostectomies in the canine elbow. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Unpaired cadaveric canine forelimbs (n = 17). METHODS: In a servohydraulic testing frame, thin-film pressure sensors were placed into the lateral and medial compartments of the elbow. Specimens were tested in 135° of elbow joint flexion at 200 N of cyclic axial force, followed by a 20 seconds hold. Intra-articular contact area (CA), mean contact pressure (mCP) and peak contact pressure (pCP) were measured in each compartment. After radial shortening, testing was repeated and limbs randomized into proximal ulnar ostectomy with IM pin (PUO) or sequential distal ulnar ostectomy (DUO), interosseous ligament release (DUO-L), and ulnar attachment of the abductor pollicis longus muscle and interosseous membrane release (DUO-ML). Paired t-tests were used to compare each treatment to baseline values. Differences between treatment groups were evaluated with a mixed model with random effect to adjust for the clustering of limbs within dog. P < .05 was considered significant. RESULTS: Radial shortening resulted in shift of mCP and pCP from the lateral to the medial compartment. The PUO group resulted in normalization of medial compartment mCP and decrease of pCP, whereas in the DUO group return to baseline was achieved only after DUO-ML. CONCLUSION: PUO is effective in unloading medial compartment pCP in an incongruent joint.

PTH treatment before cyclic joint loading improves cartilage health and attenuates load-induced osteoarthritis development in mice.

Osteoarthritis (OA) treatment is limited by the lack of effective nonsurgical interventions to slow disease progression. Here, we examined the contributions of the subchondral bone properties to OA development. We used parathyroid hormone (PTH) to modulate bone mass before OA initiation and alendronate (ALN) to inhibit bone remodeling during OA progression. We examined the spatiotemporal progression of joint damage by combining histopathological and transcriptomic analyses across joint tissues. The additive effect of PTH pretreatment before OA initiation and ALN treatment during OA progression most effectively attenuated load-induced OA pathology. Individually, PTH directly improved cartilage health and slowed the development of cartilage damage, whereas ALN primarily attenuated subchondral bone changes associated with OA progression. Joint damage reflected early transcriptomic changes. With both treatments, the structural changes were associated with early modulation of immunoregulation and immunoresponse pathways that may contribute to disease mechanisms. Overall, our results demonstrate the potential of subchondral bone-modifying therapies to slow the progression of OA.

Grand Challenges at the Interface of Engineering and Medicine.

Over the past two decades Biomedical Engineering has emerged as a major discipline that bridges societal needs of human health care with the development of novel technologies. Every medical institution is now equipped at varying degrees of sophistication with the ability to monitor human health in both non-invasive and invasive modes. The multiple scales at which human physiology can be interrogated provide a profound perspective on health and disease. We are at the nexus of creating "avatars" (herein defined as an extension of "digital twins") of human patho/physiology to serve as paradigms for interrogation and potential intervention. Motivated by the emergence of these new capabilities, the IEEE Engineering in Medicine and Biology Society, the Departments of Biomedical Engineering at Johns Hopkins University and Bioengineering at University of California at San Diego sponsored an interdisciplinary workshop to define the grand challenges that face biomedical engineering and the mechanisms to address these challenges. The Workshop identified five grand challenges with cross-cutting themes and provided a roadmap for new technologies, identified new training needs, and defined the types of interdisciplinary teams needed for addressing these challenges. The themes presented in this paper include: 1) accumedicine through creation of avatars of cells, tissues, organs and whole human; 2) development of smart and responsive devices for human function augmentation; 3) exocortical technologies to understand brain function and treat neuropathologies; 4) the development of approaches to harness the human immune system for health and wellness; and 5) new strategies to engineer genomes and cells.

Small-Animal Compression Models of Osteoarthritis.

The utility of nonsurgical, mechanical compression-based joint injury models to study osteoarthritis pathogenesis and treatments is increasing. Joint injury may be induced via cyclic compression loading or acute overloading to induce anterior cruciate ligament rupture. Models utilizing mechanical testing systems are highly repeatable, require little expertise, and result in a predictable onset of osteoarthritis-like pathology on a rapidly progressing timeline. In this chapter, we describe the procedures and equipment needed to perform mechanical compression-induced initiation of osteoarthritis in mice and rats.

PTH Treatment Increases Cortical Bone Mass More in Response to Compression than Tension in Mice.

Parathyroid hormone (PTH) is an anabolic osteoporosis treatment that increases bone mass and reduces fracture risk. Clinically, the effects of PTH are site-specific, increasing bone mass more at the spine than the hip and not increasing bone mass at the radius. Differences in local loading environment between the spine, hip, and radius may help explain the variation in efficacy, as PTH and mechanical loading have been shown to synergistically increase bone mass. We hypothesized that differences in loading mode might further explain these variations. Owing to the curvature of the mouse tibia, cyclic compression of the hindlimb causes bending at the tibial midshaft, placing the anterior surface under tension and the posterior surface under compression. We investigated the combination of PTH treatment and tibial loading in an osteoblast-specific estrogen receptor-alpha knockout mouse model of low bone mass (pOC-ERαKO) and their littermate controls (LCs) and analyzed bone morphology in the tensile, compressive, and neutral regions of the tibial midshaft. We also hypothesized that pretreating wild-type C57Bl/6J (WT) mice with PTH prior to mechanical loading would enhance the synergistic anabolic effects. Compression was more anabolic than tension, and PTH enhanced the effect of loading, particularly under compression. PTH pretreatment maintained the synergistic anabolic effect for longer durations than concurrent treatment and loading alone. Together these data provide insights into more effective physical therapy and exercise regimens for patients receiving PTH treatment. © 2022 American Society for Bone and Mineral Research (ASBMR).

Posttraumatic osteoarthritis: from basic science to clinical implications.

Posttraumatic osteoarthritis (PTOA) is a subset of osteoarthritis that occurs after joint injury and is associated with degradation of articular cartilage and subchondral bone. As compared with primary osteoarthritis, PTOA occurs in a time window initiated by a traumatic event resulting in damage to layers of joint structure and alterations in joint shape. As techniques in open reduction and internal fixation continue to mature, our success in preventing posttraumatic osteoarthritis has not kept pace. Advances in research in the subchondral bone, inflammatory response, and joint mechanics continue to open our understanding of this posttraumatic process. In addition, there are possibilities emerging as biological agents to therapeutically alter the progression of PTOA.

Inducing Angiogenesis in the Nucleus Pulposus.

Bone morphogenetic protein (BMP) gene delivery to Lewis rat lumbar intervertebral discs (IVDs) drives bone formation anterior and external to the IVD, suggesting the IVD is inhospitable to osteogenesis. This study was designed to determine if IVD destruction with a proteoglycanase, and/or generating an IVD blood supply by gene delivery of an angiogenic growth factor, could render the IVD permissive to intra-discal BMP-driven osteogenesis and fusion. Surgical intra-discal delivery of naïve or gene-programmed cells (BMP2/BMP7 co-expressing or VEGF165 expressing) +/- purified chondroitinase-ABC (chABC) in all permutations was performed between lumbar 4/5 and L5/6 vertebrae, and radiographic, histology, and biomechanics endpoints were collected. Follow-up anti-sFlt Western blotting was performed. BMP and VEGF/BMP treatments had the highest stiffness, bone production and fusion. Bone was induced anterior to the IVD, and was not intra-discal from any treatment. chABC impaired BMP-driven osteogenesis, decreased histological staining for IVD proteoglycans, and made the IVD permissive to angiogenesis. A soluble fragment of VEGF Receptor-1 (sFlt) was liberated from the IVD matrix by incubation with chABC, suggesting dysregulation of the sFlt matrix attachment is a possible mechanism for the chABC-mediated IVD angiogenesis we observed. Based on these results, the IVD can be manipulated to foster vascular invasion, and by extension, possibly osteogenesis.

Potential influences on optimizing long-term musculoskeletal health in children and adolescents with X-linked hypophosphatemia (XLH).

In recent years, much progress has been made in understanding the mechanisms of bone growth and development over a lifespan, including the crosstalk between muscle and bone, to achieve optimal structure and function. While there have been significant advances in understanding how to help improve and maintain bone health in normal individuals, there is limited knowledge on whether these mechanisms apply or are compromised in pathological states. X-linked hypophosphatemia (XLH) (ORPHA:89936) is a rare, heritable, renal phosphate-wasting disorder. The resultant chronic hypophosphatemia leads to progressive deterioration in musculoskeletal function, including impaired growth, rickets, and limb deformities in children, as well as lifelong osteomalacia with reduced bone quality and impaired muscle structure and function. The clinical manifestations of the disease vary both in presentation and severity in affected individuals, and many of the consequences of childhood defects persist into adulthood, causing significant morbidity that impacts physical function and quality of life. Intervention to restore phosphate levels early in life during the critical stages of skeletal development in children with XLH could optimize growth and may prevent or reduce bone deformities in childhood. A healthier bone structure, together with improved muscle function, can lead to physical activity enhancing musculoskeletal health throughout life. In adults, continued management may help to maintain the positive effects acquired from childhood treatment, thereby slowing or halting disease progression. In this review, we summarize the opinions from members of a working group with expertise in pediatrics, epidemiology, and bone, joint and muscle biology, on potential outcomes for people with XLH, who have been optimally treated from an early age and continue treatment throughout life.

Molecular Identification of Spatially Distinct Anabolic Responses to Mechanical Loading in Murine Cortical Bone.

Osteoporosis affects over 200 million women worldwide, one-third of whom are predicted to suffer from an osteoporotic fracture in their lifetime. The most promising anabolic drugs involve administration of expensive antibodies. Because mechanical loading stimulates bone formation, our current data, using a mouse model, replicates the anabolic effects of loading in humans and may identify novel pathways amenable to oral treatment. Murine tibial compression produces axially varying deformations along the cortical bone, inducing highest strains at the mid-diaphysis and lowest at the metaphyseal shell. To test the hypothesis that load-induced transcriptomic responses at different axial locations of cortical bone would vary as a function of strain magnitude, we loaded the left tibias of 10-week-old female C57Bl/6 mice in vivo in compression, with contralateral limbs as controls. Animals were euthanized at 1, 3, or 24 hours post-loading or loaded for 1 week (n = 4-5/group). Bone marrow and cancellous bone were removed, cortical bone was segmented into the metaphyseal shell, proximal diaphysis, and mid-diaphysis, and load-induced differential gene expression and enriched biological processes were examined for the three segments. At each time point, the mid-diaphysis (highest strain) had the greatest transcriptomic response. Similarly, biological processes regulating bone formation and turnover increased earlier and to the greatest extent at the mid-diaphysis. Higher strain induced greater levels of osteoblast and osteocyte genes, whereas expression was lower in osteoclasts. Among the top differentially expressed genes at 24-hours post-loading, 17 had known functions in bone biology, of which 12 were present only in osteoblasts, 3 exclusively in osteoclasts, and 2 were present in both cell types. Based on these results, we conclude that murine tibial loading induces spatially unique transcriptomic responses correlating with strain magnitude in cortical bone. © 2022 American Society for Bone and Mineral Research (ASBMR).

Contribution of joint tissue properties to load-induced osteoarthritis.

Objective: Clinical evidence suggests that abnormal mechanical forces play a major role in the initiation and progression of osteoarthritis (OA). However, few studies have examined the mechanical environment that leads to disease. Thus, using a mouse tibial loading model, we quantified the cartilage contact stresses and examined the effects of altering tissue material properties on joint stresses during loading. Design: Using a discrete element model (DEA) in conjunction with joint kinematics data from a murine knee joint compression model, the magnitude and distribution of contact stresses in the tibial cartilage during joint loading were quantified at levels ranging from 0 to 9 N in 1 N increments. In addition, a simplified finite element (FEA) contact model was developed to simulate the knee joint, and parametric analyses were conducted to investigate the effects of altering bone and cartilage material properties on joint stresses during compressive loading. Results: As loading increased, the peak contact pressures were sufficient to induce fibrillations on the cartilage surfaces. The computed areas of peak contact pressures correlated with experimentally defined areas of highest cartilage damage. Only alterations in cartilage properties and geometry caused large changes in cartilage contact pressures. However, changes in both bone and cartilage material properties resulted in significant changes in stresses induced in the bone during compressive loading. Conclusions: The level of mechanical stress induced by compressive tibial loading directly correlated with areas of biological change observed in the mouse knee joint. These results, taken together with the parametric analyses, are the first to demonstrate both experimentally and computationally that the tibial loading model is a useful preclinical platform with which to predict and study the effects of modulating bone and/or cartilage properties on attenuating OA progression. Given the direct correlation between computational modeling and experimental results, the effects of tissue-modifying treatments may be predicted prior to in vivo experimentation, allowing for novel therapeutics to be developed.

Bone mass and adaptation to mechanical loading are sexually dimorphic in adult osteoblast-specific ERα knockout mice.

Estrogen receptor-alpha (ERα) regulates bone mass and is implicated in bone tissue's response to mechanical loading. The effects of ERα deletion in mice depend on sex, anatomical location, and the cellular stage at which ERα is removed. Few studies have investigated the effect of age on the role of ERα in skeletal maintenance and functional adaptation. We previously demonstrated that bone mass and adaptation to loading were altered in growing 10-week-old female and male mice lacking ERα in mature osteoblasts and osteocytes (pOC-ERαKO). Here our goal was to determine the effects of ERα and mechanical loading in skeletally-mature adult mice. We subjected 26-week-old skeletally-mature adult pOC-ERαKO and littermate control (LC) mice of both sexes to two weeks of in vivo cyclic tibial loading. ERα deletion in male mice did not alter bone mass or the response to loading. Adult female pOC-ERαKO mice had reduced cancellous and cortical bone mass and increased adaptation to high-magnitude mechanical loading compared to LC mice. Thus, ERα deletion from mature osteoblasts reduced the bone mass and increased the mechanoadaptation of adult female but not male mice. Additionally, compared to our previous work in young mice, adult female mice had greatly reduced mechanoadaptation and adult male mice retained most of their mechanoadaptation with age.

Lumbar spine intervertebral disc gene delivery of BMPs induces anterior spine fusion in lewis rats.

Minimally invasive techniques and biological autograft alternatives such as the bone morphogenetic proteins (BMPs) can reduce morbidity associated with spinal fusions. This study was a proof-of-concept for gene-therapy-mediated anterior spine fusion that could be adapted to percutaneous technique for clinical use. Isogeneic bone marrow stromal cells genetically programmed to express b-galactosidase (LACZ, a marker gene), BMP2, BMP7, a mixture of BMP2 and BMP7 infected cells (homodimers, HM), or BMP2/7 heterodimers (HT) were implanted into the discs between lumbar vertebrae 4 and 5 (L4/5) and L5/6 of male Lewis rats. Spine stiffening was monitored at 4, 8 and 12 weeks using noninvasive-induced angular displacement (NIAD) testing. At 12 weeks isolated spines were assessed for fusion and bone formation by palpation, biomechanical testing [four-point bending stiffness, moment to failure in extension, and in vitro angular displacement (IVAD)], faxitron x-rays, microCT, and histology. Progressive loss of NIAD occurred in only the HT group (p < 0.001), and biomechanical tests correlated with the NIAD results. Significant fusion occurred only in the HT group (94% of animals with one or both levels) as assessed by palpation (p < 0.001), which predicted HT bone production assessed by faxitron (p ≤ 0.001) or microCT (p < 0.023). Intervertebral bridging bone was consistently observed only in HT-treated specimens. Induced bone was located anterior and lateral to the disc space, with no bone formation noted within the disc. Percutaneous anterior spine fusions may be possible clinically, but induction of bone inside the disc space remains a challenge.

Biphasic regulation of osteoblast development via the ERK MAPK-mTOR pathway.

Emerging evidence supports that osteogenic differentiation of skeletal progenitors is a key determinant of overall bone formation and bone mass. Despite extensive studies showing the function of mitogen-activated protein kinases (MAPKs) in osteoblast differentiation, none of these studies show in vivo evidence of a role for MAPKs in osteoblast maturation subsequent to lineage commitment. Here, we describe how the extracellular signal-regulated kinase (ERK) pathway in osteoblasts controls bone formation by suppressing the mechanistic target of rapamycin (mTOR) pathway. We also show that, while ERK inhibition blocks the differentiation of osteogenic precursors when initiated at an early stage, ERK inhibition surprisingly promotes the later stages of osteoblast differentiation. Accordingly, inhibition of the ERK pathway using a small compound inhibitor or conditional deletion of the MAP2Ks Map2k1 (MEK1) and Map2k2 (MEK2), in mature osteoblasts and osteocytes, markedly increased bone formation due to augmented osteoblast differentiation. Mice with inducible deletion of the ERK pathway in mature osteoblasts also displayed similar phenotypes, demonstrating that this phenotype reflects continuous postnatal inhibition of late-stage osteoblast maturation. Mechanistically, ERK inhibition increases mitochondrial function and SGK1 phosphorylation via mTOR2 activation, which leads to osteoblast differentiation and production of angiogenic and osteogenic factors to promote bone formation. This phenotype was partially reversed by inhibiting mTOR. Our study uncovers a surprising dichotomy of ERK pathway functions in osteoblasts, whereby ERK activation promotes the early differentiation of osteoblast precursors, but inhibits the subsequent differentiation of committed osteoblasts via mTOR-mediated regulation of mitochondrial function and SGK1.

Whole bone mechanics and bone quality.

BACKGROUND: The skeleton plays a critical structural role in bearing functional loads, and failure to do so results in fracture. As we evaluate new therapeutics and consider treatments to prevent skeletal fractures, understanding the basic mechanics underlying whole bone testing and the key principles and characteristics contributing to the structural strength of a bone is critical. QUESTIONS/PURPOSES: We therefore asked: (1) How are whole bone mechanical tests performed and what are the key outcomes measured? (2) How do the intrinsic characteristics of bone tissue contribute to the mechanical properties of a whole bone? (3) What are the effects of extrinsic characteristics on whole bone mechanical behavior? (4) Do environmental factors affect whole bone mechanical properties? METHODS: We conducted a PubMed search using specific search terms and limiting our included articles to those related to in vitro testing of whole bones. Basic solid mechanics concepts are summarized in the context of whole bone testing and the determinants of whole bone behavior. RESULTS: Whole bone mechanical tests measure structural stiffness and strength from load-deformation data. Whole bone stiffness and strength are a function of total bone mass and the tissue geometric distribution and material properties. Age, sex, genetics, diet, and activity contribute to bone structural performance and affect the incidence of skeletal fractures. CONCLUSIONS: Understanding and preventing skeletal fractures is clinically important. Laboratory tests of whole bone strength are currently the only measures for in vivo fracture prediction. In the future, combined imaging and engineering models may be able to predict whole bone strength noninvasively.