Converting Escherichia coli to a Synthetic Methylotroph Growing Solely on Methanol.

Methanol, being electron rich and derivable from methane or CO2, is a potentially renewable one-carbon (C1) feedstock for microorganisms. Although the ribulose monophosphate (RuMP) cycle used by methylotrophs to assimilate methanol differs from the typical sugar metabolism by only three enzymes, turning a non-methylotrophic organism to a synthetic methylotroph that grows to a high cell density has been challenging. Here we reprogrammed E. coli using metabolic robustness criteria followed by laboratory evolution to establish a strain that can efficiently utilize methanol as the sole carbon source. This synthetic methylotroph alleviated a so far uncharacterized hurdle, DNA-protein crosslinking (DPC), by insertion sequence (IS)-mediated copy number variations (CNVs) and balanced the metabolic flux by mutations. Being capable of growing at a rate comparable with natural methylotrophs in a wide range of methanol concentrations, this synthetic methylotrophic strain illustrates genome editing and evolution for microbial tropism changes and expands the scope of biological C1 conversion.

Advancing sustainable biotechnology through protein engineering.

The push for industrial sustainability benefits from the use of enzymes as a replacement for traditional chemistry. Biological catalysts, especially those that have been engineered for increased activity, stability, or novel function, and are often greener than alternative chemical approaches. This Review highlights the role of engineered enzymes (and identifies directions for further engineering efforts) in the application areas of greenhouse gas sequestration, fuel production, bioremediation, and degradation of plastic wastes.

Capturing a methanogenic carbon monoxide dehydrogenase/acetyl-CoA synthase complex via cryogenic electron microscopy.

Approximately two-thirds of the estimated one-billion metric tons of methane produced annually by methanogens is derived from the cleavage of acetate. Acetate is broken down by a Ni-Fe-S-containing A-cluster within the enzyme acetyl-CoA synthase (ACS) to carbon monoxide (CO) and a methyl group (CH3+). The methyl group ultimately forms the greenhouse gas methane, whereas CO is converted to the greenhouse gas carbon dioxide (CO2) by a Ni-Fe-S-containing C-cluster within the enzyme carbon monoxide dehydrogenase (CODH). Although structures have been solved of CODH/ACS from acetogens, which use these enzymes to make acetate from CO2, no structure of a CODH/ACS from a methanogen has been reported. In this work, we use cryo-electron microscopy to reveal the structure of a methanogenic CODH and CODH/ACS from Methanosarcina thermophila (MetCODH/ACS). We find that the N-terminal domain of acetogenic ACS, which is missing in all methanogens, is replaced by a domain of CODH. This CODH domain provides a channel for CO to travel between the two catalytic Ni-Fe-S clusters. It generates the binding surface for ACS and creates a remarkably similar CO alcove above the A-cluster using residues from CODH rather than ACS. Comparison of our MetCODH/ACS structure with our MetCODH structure reveals a molecular mechanism to restrict gas flow from the CO channel when ACS departs, preventing CO escape into the cell. Overall, these long-awaited structures of a methanogenic CODH/ACS reveal striking functional similarities to their acetogenic counterparts despite a substantial difference in domain organization.

Substantial increase in perfluorocarbons CF4 (PFC-14) and C2F6 (PFC-116) emissions in China.

The perfluorocarbons tetrafluoromethane (CF4, PFC-14) and hexafluoroethane (C2F6, PFC-116) are potent greenhouse gases with near-permanent atmospheric lifetimes relative to human timescales and global warming potentials thousands of times that of CO2. Using long-term atmospheric observations from a Chinese network and an inverse modeling approach (top-down method), we determined that CF4 emissions in China increased from 4.7 (4.2-5.0, 68% uncertainty interval) Gg y-1 in 2012 to 8.3 (7.7-8.9) Gg y-1 in 2021, and C2F6 emissions in China increased from 0.74 (0.66-0.80) Gg y-1 in 2011 to 1.32 (1.24-1.40) Gg y-1 in 2021, both increasing by approximately 78%. Combined emissions of CF4 and C2F6 in China reached 78 Mt CO2-eq in 2021. The absolute increase in emissions of each substance in China between 2011-2012 and 2017-2020 was similar to (for CF4), or greater than (for C2F6), the respective absolute increase in global emissions over the same period. Substantial CF4 and C2F6 emissions were identified in the less-populated western regions of China, probably due to emissions from the expanding aluminum industry in these resource-intensive regions. It is likely that the aluminum industry dominates CF4 emissions in China, while the aluminum and semiconductor industries both contribute to C2F6 emissions. Based on atmospheric observations, this study validates the emission magnitudes reported in national bottom-up inventories and provides insights into detailed spatial distributions and emission sources beyond what is reported in national bottom-up inventories.

Climate impacts of alternative beef production systems depend on the functional unit used: Weight or monetary value.

Beef production has been identified as a significant source of anthropogenic greenhouse gas (GHG) emissions in the agricultural sector. United States and Canada account for about a quarter of the world's beef supply. To compare the GHG emission contributions of alternative beef production systems, we conducted a meta-analysis of 32 studies that were conducted between 2001 and 2023. Results indicated that GHG emissions from beef production in North America varied almost fourfold from 10.2 to 37.6 with an average of 21.4 kg CO2e/kg carcass weight (CW). Studies that considered soil C sequestration (C-seq) reported the highest mitigation potential in GHG emissions (80%), followed by growth enhancement technology (16%), diet modification (6%), and grazing management improvement (7%). Our study highlights the implications of using carbon intensity per economic activity (i.e., GHG emissions per monetary unit), compared to the more common metric of intensity on per weight of product basis (GHG emissions per kg CW) for comparisons across differentiated beef cattle products. While a positive association was found between the proportion of lifespan on grassland and the conventional weight-based indicator, grass-finished beef was found to have lower carbon intensity per economic activity than feedlot-finished beef. Our study emphasizes the need to incorporate land use and management effects and soil C-seq as fundamental aspects of beef GHG emissions and mitigation assessments.

Complementary roles for mechanical and solvent-based recycling in low-carbon, circular polypropylene.

Plastic recycling presents a vexing challenge. Mechanical recycling offers substantial greenhouse gas emissions savings relative to virgin plastic production but suffers from degraded aesthetic and mechanical properties. Polypropylene, one of the most widely used and lowest-cost plastics, features methyl pendants along the polymer backbone, rendering it particularly susceptible to declining properties, performance, and aesthetics across a succession of mechanical recycles. Advanced processes, such as solvent-assisted recycling, promise near-virgin quality outputs at a greater energy and emissions footprint. Mechanical and advanced recycling are often presented as competing options, but real-world plastic waste streams are likely to require preprocessing regardless of whether they are routed to an advanced process. This study quantifies the life-cycle greenhouse gas implications of multiple recycling strategies and proposes a system in which mechanical and solvent-assisted recycling can be leveraged together to boost recycling rates and satisfy demand for a wider range of product applications. Polypropylene can be recovered from mixed-plastic bales produced at material recovery facilities and processed through mechanical recycling, with a varying fraction sent for further upgrading via solvent-assisted recycling to produce material approved for food packaging and other higher-quality applications. The resulting mechanically recycled rigid polypropylene reduces life-cycle greenhouse gas emissions by 80% relative to the same quantity of virgin material, while the upgraded higher-quality material achieves GHG savings of 30%.

Investing in mini-livestock production for food security and carbon neutrality in China.

Future food farming technology faces challenges that must integrate the core goal of keeping the global temperature increase within 1.5 °C without reducing food security and nutrition. Here, we show that boosting the production of insects and earthworms based on food waste and livestock manure to provide food and feed in China will greatly contribute to meeting the country's food security and carbon neutrality pledges. By substituting domestic products with mini-livestock (defined as earthworms and insects produced for food or feed) protein and utilizing the recovered land for bioenergy production plus carbon capture and storage, China's agricultural sector could become carbon-neutral and reduce feed protein imports to near zero. This structural change may lead to reducing greenhouse gas emissions by 2,350 Tg CO2eq per year globally when both domestic and imported products are substituted. Overall, the success of mini-livestock protein production in achieving carbon neutrality and food security for China and its major trading partners depends on how the substitution strategies will be implemented and how the recovered agricultural land will be managed, e.g., free use for afforestation and bioenergy or by restricting this land to food crop use. Using China as an example, this study also demonstrates the potential of mini-livestock for decreasing the environmental burden of food production in general.

Climate-smart forestry through innovative wood products and commercial afforestation and reforestation on marginal land.

Afforestation and reforestation (AR) on marginal land are nature-based solutions to climate change. There is a gap in understanding the climate mitigation potential of protection and commercial AR with different combinations of forest plantation management and wood utilization pathways. Here, we fill the gap using a dynamic, multiscale life cycle assessment to estimate one-century greenhouse gas (GHG) mitigation delivered by (both traditional and innovative) commercial and protection AR with different planting density and thinning regimes on marginal land in the southeastern United States. We found that innovative commercial AR generally mitigates more GHGs across 100 y (3.73 to 4.15 Giga tonnes of CO2 equivalent (Gt CO2e)) through cross-laminated timber (CLT) and biochar than protection AR (3.35 to 3.69 Gt CO2e) and commercial AR with traditional lumber production (3.17 to 3.51 Gt CO2e), especially in moderately cooler and dryer regions in this study with higher forest carbon yield, soil clay content, and CLT substitution. In a shorter timeframe (≤50 y), protection AR is likely to deliver higher GHG mitigation. On average, for the same wood product, low-density plantations without thinning and high-density plantations with thinning mitigate more life cycle GHGs and result in higher carbon stock than that of low-density with thinning plantations. Commercial AR increases the carbon stock of standing plantations, wood products, and biochar, but the increases have uneven spatial distributions. Georgia (0.38 Gt C), Alabama (0.28 Gt C), and North Carolina (0.13 Gt C) have the largest carbon stock increases that can be prioritized for innovative commercial AR projects on marginal land.

Tracing sources of atmospheric methane using clumped isotopes.

We apply a recently developed measurement technique for methane (CH4) isotopologues* (isotopic variants of CH4-13CH4, 12CH3D, 13CH3D, and 12CH2D2) to identify contributions to the atmospheric burden from fossil fuel and microbial sources. The aim of this study is to constrain factors that ultimately control the concentration of this potent greenhouse gas on global, regional, and local levels. While predictions of atmospheric methane isotopologues have been modeled, we present direct measurements that point to a different atmospheric methane composition and to a microbial flux with less clumping (greater deficits relative to stochastic) in both 13CH3D and 12CH2D2 than had been previously assigned. These differences make atmospheric isotopologue data sufficiently sensitive to variations in microbial to fossil fuel fluxes to distinguish between emissions scenarios such as those generated by different versions of EDGAR (the Emissions Database for Global Atmospheric Research), even when existing constraints on the atmospheric CH4 concentration profile as well as traditional isotopes are kept constant.

Promoting C-F bond activation via proton donor for CF4 decomposition.

Tetrafluoromethane (CF4), the simplest perfluorocarbons, is a permanently potent greenhouse gas due to its powerful infrared radiation adsorption capacity. The highly symmetric and robust C-F bond structure makes its activation a great challenge. Herein, we presented an innovated approach that efficiently activates C-F bond utilizing protonated sulfate (-HSO4) modified Al2O3@ZrO2 (S-Al2O3@ZrO2) catalyst, resulting in highly efficient CF4 decomposition. By combining in situ infrared spectroscopy tests and density function theory simulations, we demonstrate that the introduced -HSO4 proton donor has a stronger interaction on the C-F bond than the hydroxyl (-OH) proton donor, which can effectively stretch the C-F bond for its activation. Consequently, the obtained S-Al2O3@ZrO2 catalyst achieved a stable 100% CF4 decomposition at a record low temperature of 580 °C with a turnover frequency value of ~8.3 times higher than the Al2O3@ZrO2 catalyst without -HSO4 modification, outperforming the previously reported results. This work paves a new way for achieving efficient C-F bond activation to decompose CF4 at a low temperature.

The Environmental Impact of Gastrointestinal Procedures: A Prospective Study of Waste Generation, Energy Consumption, and Auditing in an Endoscopy Unit.

BACKGROUND & AIMS: Gastrointestinal (GI) endoscopy procedures are critical for screening, diagnosis, and treatment of a variety of GI disorders. However, like the procedures in other medical disciplines, they are a source of environmental waste generation and energy consumption. METHODS: We prospectively collected data on total waste generation, energy consumption, and the role of intraprocedural inventory audit of a single tertiary care academic endoscopy unit over a 2-month period (May-June 2022). Detailed data on items used were collected, including procedure type (esophagogastroduodenoscopy or colonoscopy), accessories, intravenous tubing, biopsy jars, linen, and personal protective equipment use. Data on endoscope reprocessing-related waste generation and energy use in the endoscopy unit (equipment, lights, and computers) were also collected. We used an endoscopy staff-guided auditing and review of the items used during procedures to determine potentially recyclable items going to landfill waste. The waste generated was stratified into biohazardous, nonbiohazardous, or potentially recyclable items. RESULTS: A total of 450 consecutive procedures were analyzed for total waste management (generation and reprocessing) and energy consumption. The total waste generated during the study period was 1398.6 kg (61.6% directly going to landfill, 33.3% biohazard waste, and 5.1% sharps), averaging 3.03 kg/procedure. The average waste directly going to landfill was 219 kg per 100 procedures. The estimated total annual waste generation approximated the size of 2 football fields (1-foot-high layered waste). Endoscope reprocessing generated 194 gallons of liquid waste per day, averaging 13.85 gallons per procedure. Total energy consumption in the endoscopy unit was 277.1 kW·h energy per day; for every 100 procedures, amounting to 1200 miles of distance traveled by an average fuel efficiency car. The estimated carbon footprint for every 100 GI procedures was 1501 kg carbon dioxide (CO2) equivalent (= 1680 lbs of coal burned), which would require 1.8 acres of forests to sequester. The recyclable waste audit and review demonstrated that 20% of total waste consisted of potentially recyclable items (8.6 kg/d) that could be avoided by appropriate waste segregation of these items. CONCLUSIONS: On average, every 100 GI endoscopy procedures (esophagogastroduodenoscopy/colonoscopy) are associated with 303 kg of solid waste and 1385 gallons of liquid waste generation, and 1980 kW·h energy consumption. Potentially recyclable materials account for 20% of the total waste. These data could serve as an actionable model for health systems to reduce total waste generation and decrease landfill waste and water waste toward environmentally sustainable endoscopy units.

Very large fluxes of methane measured above Bolivian seasonal wetlands.

Methane (CH4) mole fractions from the large semiseasonal Llanos de Moxos wetlands (∼70,000 km2) in northern Bolivia were measured by aircraft flights and ground sampling during early March 2019 (late wet season). Daily fluxes of CH4 determined from the measurements using box models and inverse modeling were between 168 (± 50) and 456 (± 145) mg CH4⋅m-2⋅d-1 for the areas overflown, very high compared with those of previous Amazon basin studies. If the seasonality of the CH4 emissions is comparable to other parts of the Amazon Basin, the region could contribute as much as 8% of annual Amazonian CH4 emissions.

The importance of hydrology in routing terrestrial carbon to the atmosphere via global streams and rivers.

SignificanceStream/river carbon dioxide (CO2) emission has significant spatial and seasonal variations critical for understanding its macroecosystem controls and plumbing of the terrestrial carbon budget. We relied on direct fluvial CO2 partial pressure measurements and seasonally varying gas transfer velocity and river network surface area estimates to resolve reach-level seasonal variations of the flux at the global scale. The percentage of terrestrial primary production (GPP) shunted into rivers that ultimately contributes to CO2 evasion increases with discharge across regions, due to a stronger response in fluvial CO2 evasion to discharge than GPP. This highlights the importance of hydrology, in particular water throughput, in terrestrial-fluvial carbon transfers and the need to account for this effect in plumbing the terrestrial carbon budget.

Spatial patterns of climate change across the Paleocene-Eocene Thermal Maximum.

The Paleocene-Eocene Thermal Maximum (PETM; 56 Ma) is one of our best geological analogs for understanding climate dynamics in a "greenhouse" world. However, proxy data representing the event are only available from select marine and terrestrial sedimentary sequences that are unevenly distributed across Earth's surface, limiting our view of the spatial patterns of climate change. Here, we use paleoclimate data assimilation (DA) to combine climate model and proxy information and create a spatially complete reconstruction of the PETM and the climate state that precedes it ("PETM-DA"). Our data-constrained results support strong polar amplification, which in the absence of an extensive cryosphere, is related to temperature feedbacks and loss of seasonal snow on land. The response of the hydrological cycle to PETM warming consists of a narrowing of the Intertropical Convergence Zone, off-equatorial drying, and an intensification of seasonal monsoons and winter storm tracks. Many of these features are also seen in simulations of future climate change under increasing anthropogenic emissions. Since the PETM-DA yields a spatially complete estimate of surface air temperature, it yields a rigorous estimate of global mean temperature change (5.6 ∘C; 5.4 ∘C to 5.9 ∘C, 95% CI) that can be used to calculate equilibrium climate sensitivity (ECS). We find that PETM ECS was 6.5 ∘C (5.7 ∘C to 7.4 ∘C, 95% CI), which is much higher than the present-day range. This supports the view that climate sensitivity increases substantially when greenhouse gas concentrations are high.

Environmental outcomes of the US Renewable Fuel Standard.

The Renewable Fuel Standard (RFS) specifies the use of biofuels in the United States and thereby guides nearly half of all global biofuel production, yet outcomes of this keystone climate and environmental regulation remain unclear. Here we combine econometric analyses, land use observations, and biophysical models to estimate the realized effects of the RFS in aggregate and down to the scale of individual agricultural fields across the United States. We find that the RFS increased corn prices by 30% and the prices of other crops by 20%, which, in turn, expanded US corn cultivation by 2.8 Mha (8.7%) and total cropland by 2.1 Mha (2.4%) in the years following policy enactment (2008 to 2016). These changes increased annual nationwide fertilizer use by 3 to 8%, increased water quality degradants by 3 to 5%, and caused enough domestic land use change emissions such that the carbon intensity of corn ethanol produced under the RFS is no less than gasoline and likely at least 24% higher. These tradeoffs must be weighed alongside the benefits of biofuels as decision-makers consider the future of renewable energy policies and the potential for fuels like corn ethanol to meet climate mitigation goals.

Marine anoxia linked to abrupt global warming during Earth's penultimate icehouse.

Piecing together the history of carbon (C) perturbation events throughout Earth's history has provided key insights into how the Earth system responds to abrupt warming. Previous studies, however, focused on short-term warming events that were superimposed on longer-term greenhouse climate states. Here, we present an integrated proxy (C and uranium [U] isotopes and paleo CO2) and multicomponent modeling approach to investigate an abrupt C perturbation and global warming event (∼304 Ma) that occurred during a paleo-glacial state. We report pronounced negative C and U isotopic excursions coincident with a doubling of atmospheric CO2 partial pressure and a biodiversity nadir. The isotopic excursions can be linked to an injection of ∼9,000 Gt of organic matter­derived C over ∼300 kyr and to near 20% of areal extent of seafloor anoxia. Earth system modeling indicates that widespread anoxic conditions can be linked to enhanced thermocline stratification and increased nutrient fluxes during this global warming within an icehouse.

Climate Change and Stroke: A Topical Narrative Review.

The impacts of accumulating atmospheric greenhouse gases on the earth's climate are now well established. As a result, there have been increases in ambient temperatures and resultant higher frequency and duration of temperature extremes and other extreme weather events, which have been linked to a wide range of adverse health outcomes. This topical narrative review provides a summary of published evidence on the links between climate change and stroke. There is consistent evidence of associations between stroke incidence and mortality and increasing ambient temperature and air pollution. Associations have also been shown for changes in barometric pressure, wildfires, and desert dust and sandstorms, but current evidence is limited. Flooding and other extreme weather events appear to primarily cause service disruption, but more direct links to stroke may emerge. Synergies between dietary changes that reduce stroke risk and may also reduce carbon footprint are being explored. We also discuss the impact on vulnerable populations, proposed pathophysiologic mechanisms, mitigation strategies, and current research priorities. In conclusion, climate change increasingly impacts the stroke community, warranting elevated attention.

Greenhouse covering cultivation promotes chlorophyll accumulation of tea plant (Camellia sinensis) by activating relevant gene expression and enzyme activity.

BACKGROUND: The tea plant (Camellia sinensis (L.) O. Kuntze) is one of the most economically important woody crops. Plastic greenhouse covering cultivation has been widely used in tea areas of northern China. Chlorophyll is not only the crucial pigment for green tea, but also plays an important role in the growth and development of tea plants. Currently, little is known about the effect of plastic greenhouse covering cultivation on chlorophyll in tea leaves. RESULTS: To investigate the effect of plastic greenhouse covering cultivation on chlorophyll in tea leaves, color difference values, chlorophyll contents, gene expression, enzyme activities and photosynthetic parameters were analyzed in our study. Sensory evaluation showed the color of appearance, liquor and infused leaves of greenhouse tea was greener than field tea. Color difference analysis for tea liquor revealed that the value of ∆L, ∆b and b/a of greenhouse tea was significantly higher than field tea. Significant increase in chlorophyll content, intracellular CO2, stomatal conductance, transpiration rate, and net photosynthetic rate was observed in greenhouse tea leaves. The gene expression and activities of chlorophyll-metabolism-related enzymes in tea leaves were also activated by greenhouse covering. CONCLUSION: The higher contents of chlorophyll a, chlorophyll b and total chlorophyll in greenhouse tea samples were primarily due to higher gene expression and activities of chlorophyll-metabolism-related enzymes especially, chlorophyll a synthetase (chlG), pheophorbide a oxygenase (PAO) and chlorophyllide a oxygenase (CAO) in tea leaves covered by greenhouse. In general, our results revealed the molecular basis of chlorophyll metabolism in tea leaves caused by plastic greenhouse covering cultivation, which had great significance in production of greenhouse tea.

Preliminary study on the diagnosis of NK stress based on the puncture mechanical characteristics of cucumber stem.

To investigate the relationship between stem puncture mechanical characteristics and NK stress diagnosis, the microstructure, surface morphology, cellulose and lignin content, puncture mechanical characteristics, and epidermal cell morphology of cucumber stems were measured herein. The results indicated that the middle stem, which had a diameter of approximately 7000 µm, was more suitable for puncturing due to its lower amount of epidermal hair, and its gradual regularity in shape. Further, the cucumber stems were protected from puncture damage due to their ability to rapidly heal within 25 h.. The epidermal penetration of the cucumber stems increased with the increase in cellulose and lignin, though cellulose played a more decisive role. The epidermal break distance increased with an increase in N application and decreased with an increase in K+ application, but the change in intercellular space caused by K+ supply was the most critical factor affecting the epidermal break distance. In addition, a decrease in K+ concentration led to a decrease in epidermal brittleness, whereas the factors affecting epidermal toughness were more complex. Finally, we found that although the detection of epidermal brittleness and toughness on nutrient stress was poor under certain treatment, the puncture mechanical characteristics of the stem still had a significant indicative effect on N application rate. Therefore, elucidating of the relationship between the puncture mechanical characteristics of the stems and crop nutritional stress is not only beneficial for promoting stem stress physiology research but also for designing on-site nutritional testing equipment in the future.

The growth, nutrient uptake and fruit quality in four strawberry cultivars under different Spectra of LED supplemental light.

An experiment was conducted in a greenhouse to determine the effects of different supplemental light spectra on the growth, nutrient uptake, and fruit quality of four strawberry cultivars. The plants were grown under natural light and treated with blue (460 nm), red (660 nm), and red/blue (3:1) lights. Results showed that the "Parous" and "Camarosa" had higher fresh and dry mass of leaves, roots, and crowns compared to the "Sabrina" and "Albion". The use of artificial LED lights improved the vegetative growth of strawberry plants. All three supplemental light spectra significantly increased the early fruit yield of cultivars except for "Parous". The red/blue supplemental light spectrum also increased the fruit mass and length of the "Albion". Supplemental light increased the total chlorophyll in "Camarosa" and "Albion", as well as the total soluble solids in fruits. The "Albion" had the highest concentration of fruit anthocyanin, while the "Sabrina" had the lowest. The use of supplemental light spectra significantly increased the fruit anthocyanin concentration in all cultivars. Without supplemental light, the "Camarosa" had the lowest concentration of K and Mg, which increased to the highest concentration with the use of supplemental light spectra. All three spectra increased Fe concentration to the highest value in the "Sabrina", while only the red/blue light spectrum was effective on the "Camarosa". In conclusion, the use of supplemental light can increase the yield and fruit quality of strawberries by elevating nutrients, chlorophyll, and anthocyanin concentrations in plants.