RESUMO
The combination of chemotherapy and phototherapy has emerged as a promising therapeutic approach for enhancing the efficacy of cancer treatment and mitigating drug resistance. Salinomycin (SAL), a polyether antibiotic, exhibits potent cytotoxicity against chemotherapy-resistant cancer cells. IR780 iodide, a novel photosensitive reagent with excellent near-infrared (NIR) light absorption and photothermal conversion abilities, is suitable for use in photothermal therapy for cancers. However, both SAL and IR780 exhibit hydrophobic properties that limit their clinical applicability. Upconversion nanoparticles (UCNPs) are an emerging class of fluorescent probe materials capable of emitting high-energy photons upon excitation by low-energy NIR light. The UCNPs not only function as nanocarriers for drug delivery but also serve as light transducers to activate photosensitizers for deep-tissue photodynamic therapy. Here, to enhance the targeting and bioavailability of hydrophobic drugs in liver cancer stem cells (LCSCs), we employ distearoyl phosphorethanolamine-polyethylene glycol (DSPE-PEG) to encapsulate SAL and IR780 on the surface of UCNPs. Cell viability was evaluated using the CCK-8 assay. Cell migration was assessed by the Transwell Boyden Chamber. The activation of the mitogen-activated protein kinase (MAPK) signaling pathway was measured via western blot. The results demonstrated successful loading of both IR780 and SAL onto the UCNPs, and the SAL and IR780-loaded UCNPs (UISP) exhibited a robust photothermal effect under NIR light irradiation. The UISP effectively inhibited the viability of HCCLM3 and LCSCs. Under NIR light irradiation, the UISP further suppressed HCCLM3 viability but had no impact on LCSC viability; however, it could further inhibit LCSC migration. Meanwhile, under NIR light irradiation, the UISP persistently activated the MAPK pathway more significantly in LCSCs. These findings suggest that exposure to NIR light results in persistent activation of the MAPK pathway by UISP, thereby influencing the biological behavior of LCSCs and enhancing their therapeutic efficacy against liver cancer.
Assuntos
Nanopartículas , Neoplasias , Fotoquimioterapia , Humanos , Fotoquimioterapia/métodos , Nanopartículas/química , Fígado , Células-Tronco Neoplásicas , Transdução de Sinais , Linhagem Celular TumoralRESUMO
Radioiodine-refractory differentiated thyroid cancer (RAIR-DTC) is difficult to treat with radioactive iodine because of the absence of the sodium iodide transporter in the basement membrane of thyroid follicular cells for iodine uptake. This is usually due to the mutation or rearrangement of genes and the aberrant activation of signal pathways, which result in abnormal expression of thyroid-specific genes, leading to resistance of differentiated thyroid cancer cells to radioiodine therapy. Therefore, inhibiting the proliferation and growth of RAIR-DTC with multikinase inhibitors and other drugs or restoring its differentiation and then carrying out radioiodine therapy have become the first-line treatment strategies and main research directions. The drugs that regulate these kinases or signaling pathways have been studied in clinical and preclinical settings. In this review, we summarized the major gene mutations, gene rearrangements and abnormal activation of signaling pathways that led to radioiodine resistance of RAIR-DTC, as well as the medicine that have been tested in clinical and preclinical trials.
Assuntos
Neoplasias da Glândula Tireoide , Humanos , Neoplasias da Glândula Tireoide/tratamento farmacológico , Neoplasias da Glândula Tireoide/genética , Neoplasias da Glândula Tireoide/radioterapia , Radioisótopos do Iodo/uso terapêutico , Transdução de SinaisRESUMO
CsPbI3 perovskite quantum dots (QDs) could achieve pure-red emission by reducing their size, but the increased exciton binding energy (EB) and surface defects for the small-sized QDs (SQDs) cause severe Auger and trap recombinations, thus worsening their electroluminescence (EL) performance. Herein, we utilize the dangling bonds of the SQDs as a driving force to accelerate KI dissolution to solve its low solubility in nonpolar solvents, thereby allowing K+ and I- to bond to the surface of SQDs. The EB of the SQDs was decreased from 305 to 51 meV because of the attraction of K+ to electrons, meanwhile surface vacancies were passivated by K+ and I-. The Auger and trap recombinations were simultaneously suppressed by this difunctional ligand. The SQD-based light-emitting diode showed a stable pure-red EL peak of 639 nm, an external quantum efficiency of 25.1% with low roll-off, and a brightness of 5934 cd m-2.
RESUMO
Derangement of redox condition largely contributes to cardiac ischemia/reperfusion (I/R) injury. FoxO1 is a transcription factor which transcripts a series of antioxidants to antagonize I/R-induced oxidative myocardial damage. N-n-butyl haloperidol iodide (F2 ) is a derivative derived from haloperidol structural modification with potent capacity of inhibiting oxidative stress. This investigation intends to validate whether cardio-protection of F2 is dependent on FoxO1 using an in vivo mouse I/R model and if so, to further elucidate the molecular regulating mechanism. This study initially revealed that F2 preconditioning led to a profound reduction in I/R injury, which was accompanied by attenuated oxidative stress and upregulation of antioxidants (SOD2 and catalase), nuclear FoxO1 and phosphorylation of AMPK. Furthermore, inactivation of FoxO1 with AS1842856 abolished the cardio-protective effect of F2 . Importantly, we identified F2 -mediated nuclear accumulation of FoxO1 is dependent on AMPK, as blockage of AMPK with compound C induced nuclear exit of FoxO1. Collectively, our data uncover that F2 pretreatment exerts significant protection against post ischemic myocardial injury by its regulation of AMPK/FoxO1 pathway, which may provide a new avenue for treating ischemic disease.
Assuntos
Proteínas Quinases Ativadas por AMP , Traumatismo por Reperfusão , Camundongos , Animais , Haloperidol/farmacologia , Miocárdio , Transdução de Sinais , Antioxidantes/farmacologiaRESUMO
Iodide perovskites have demonstrated their unprecedented high efficiency and commercialization potential, and their superior optoelectronic properties, such as high absorption coefficient, high carrier mobility, and narrow direct bandgap, have attracted much attention, especially in solar cells, photodetectors, and light-emitting diodes (LEDs). However, whether it is organic iodide perovskite, organic-inorganic hybrid iodide perovskite or all-inorganic iodide perovskite the stability of these iodide perovskites is still poor and the contamination is high. In recent years, scholars have studied more iodide perovskites to improve their stability as well as optoelectronic properties from various angles. This paper systematically reviews the strategies (component engineering, additive engineering, dimensionality reduction engineering, and phase mixing engineering) used to improve the stability of iodide perovskites and their applications in recent years.
RESUMO
Amidino-based additives show great potential in high-performance perovskite solar cells (PSCs). However, the role of different functional groups in amidino-based additives have not been well elucidated. Herein, two multifunctional amidino additives 4-amidinobenzoic acid hydrochloride (ABAc) and 4-amidinobenzamide hydrochloride (ABAm) are employed to improve the film quality of formamidinium lead iodide (FAPbI3) perovskites. Compared with ABAc, the amide group imparts ABAm with larger dipole moment and thus stronger interactions with the perovskite components, i.e., the hydrogen bonds between N H and I- anion and coordination bonds between C = O and Pb2+ cation. It strengthens the passivation effect of iodine vacancy defect and slows down the crystallization process of α-FAPbI3, resulting in the significantly reduced non-radiative recombination, long carrier lifetime of 1.7 µs, uniformly large crystalline grains, and enhances hydrophobicity. Profiting from the improved film quality, the ABAm-treated PSC achieves a high efficiency of 24.60%, and maintains 93% of the initial efficiency after storage in ambient environment for 1200 hours. This work provides new insights for rational design of multifunctional additives regarding of defect passivation and crystallization control toward highly efficient and stable PSCs.
RESUMO
Blade-coating stands out as an alternative for fabricating scalable perovskite solar cells. However, it demands special control of the precursor composition regarding nucleation and crystallization and currently exhibits lower performance than the spin-coating process. It is mainly the resulting film morphology and excess lead iodide (PbI2) distribution that influences the optoelectronic properties. Here, the effectiveness of introducing N-Methyl-2-pyrrolidone (NMP) to regulate the structure of the perovskite layer and the redistribution of PbI2 is found. The introduction of NMP leads to the accumulation of excess PbI2, mainly on the top surface, reducing residual PbI2 at the perovskite buried interface. This not only facilitates the passivation of perovskite grain boundaries but also eliminates the potential degradation of the PbI2 triggered by light illumination in the perovskite buried interface. The optimized NMP-modified inverted perovskite solar cell achieves a champion efficiency of 24.5%, among the highest reported blade-coated perovskite solar cells. Furthermore, 13.68 cm2 blading perovskite solar modules are fabricated and demonstrate an efficiency of up to 20.4%. These findings underscore that with proper modulation of precursor composition, blade-coating can be a feasible and superior alternative for manufacturing high-quality perovskite films, paving the way for their large-scale applications in photovoltaic technology.
RESUMO
In the quest for advanced memristor technologies, this study introduces the synthesis of delta-formamidinium lead iodide (δ-FAPbI3) nanoparticles (NPs) and their self-assembly into nanorods (NRs). The formation of these NRs is facilitated by iodide vacancies, promoting the fusion of individual NPs at higher concentrations. Notably, these NRs exhibit robust stability under ambient conditions, a distinctive advantage attributed to the presence of capping ligands and a crystal lattice structured around face-sharing octahedra. When employed as the active layer in resistive random-access memory devices, these NRs demonstrate exceptional bipolar switching properties. A remarkable on/off ratio (105) is achieved, surpassing the performances of previously reported low-dimensional perovskite derivatives and α-FAPbI3 NP-based devices. This enhanced performance is attributed to the low off-state current owing to the reduced number of halide vacancies, intrinsic low dimensionality, and the parallel alignment of NRs on the FTO substrate. This study not only provides significant insights into the development of superior materials for memristor applications but also opens new avenues for exploring low-dimensional perovskite derivatives in advanced electronic devices.
RESUMO
Carbon-based hole transport layer-free perovskite solar cells (PSCs) based on methylammonium lead triiodide (MAPbI3 ) have become one of the research focus due to low cost, easy preparation, and good optoelectronic properties. However, instability of perovskite under vacancy defects and stress-strain makes it difficult to achieve high-efficiency and stable power output. Here, a soft-structured long-chain 2D pentanamine iodide (abbreviated as "PI") is used to improve perovskite quality and interfacial mechanical compatibility. PI containing CH3 (CH2 )4 NH3 + and I- ions not only passivate defects at grain boundaries, but also effectively alleviate residual stress during high temperature annealing via decreasing Young's modulus of perovskite film. Most importantly, PI effectively increases matching degree of Young's modulus between MAPbI3 (47.1 GPa) and carbon (6.7 GPa), and strengthens adhesive fracture energy (Gc ) between perovskite and carbon, which is helpful for outward release of nascent interfacial stress generated under service conditions. Consequently, photoelectric conversion efficiency (PCE) of optimal device is enhanced from 10.85% to 13.76% and operational stability is also significantly improved. 83.1% output is maintained after aging for 720 h at room temperature and 25-60% relative humidity (RH). This strategy of regulation from chemistry and physics provides a strategy for efficient and stable carbon-based PSCs.
RESUMO
Considering the direct influence of substrate surface nature on perovskite (PVK) film growth, buried interfacial engineering is crucial to obtain ideal perovskite solar cells (PSCs). Herein, 1-(3-aminopropyl)-imidazole (API) is introduced at polytriarylamine (PTAA)/PVK interface to modulate the bottom property of PVK. First, the introduction of API improves the growth of PVK grains and reduces the Pb2+ defects and residual PbI2 present at the bottom of the film, contributing to the acquisition of high-quality PVK film. Besides, the presence of API can optimize the energy structure between PVK and PTAA, which facilitates the interfacial charge transfer. Density functional theory (DFT) reveals that the electron donor unit (R-C â N) of the API prefers to bind with Pb2+ traps at the PVK interface, while the formation of hydrogen bonds between the R-NH2 of API and I- strengthens the above binding ability. Consequently, the optimum API-treated inverted formamidinium-cesium (FA/Cs) PSCs yields a champion power conversion efficiency (PCE) of 22.02% and exhibited favorable stability.
RESUMO
Finding novel methodologies that enhance the precision, agility, and standardization of drug discovery is crucial for studying leishmaniasis. The slide count is the technique most used to assess the leishmanicidal effect of a given drug in vitro. Despite being consolidated in the scientific environment, it presents several difficulties in its execution, assessment, and results. In addition to being laborious, this technique takes time, both for the preparation of the material for analysis and for the counting itself. Our research group suggests a fresh approach to address this requirement, which involves utilizing nuclear labeling with propidium iodide and flow cytometry to determine the quantity of Leishmania sp. parasites present in macrophages in vitro. Our results show that the fluorescence of infected samples increases as the infection rate increases. Using Pearson's Correlation analysis, it was possible to establish a correlation coefficient (Pearson r = 0.9473) that was strongly positive, linear, and directly proportional to the fluorescence and infection rate variables. Thus, it is possible to infer a mathematical equation through linear regression to estimate the number of parasites in each sample using the Relative Fluorescence Units (RFU) values. This new methodology opens space for the possibility of using this methodological resource in the in vitro quantification of Leishmania in macrophages.
Assuntos
Citometria de Fluxo , Leishmania , Macrófagos , Carga Parasitária , Citometria de Fluxo/métodos , Macrófagos/parasitologia , Animais , Camundongos , Carga Parasitária/métodos , Leishmaniose/parasitologia , Propídio , Camundongos Endogâmicos BALB CRESUMO
Previous studies have shown that antimicrobial photodynamic inactivation (aPDI) can be strongly potentiated by the addition of the non-toxic inorganic salt, potassium iodide (KI). This approach was shown to apply to many different photosensitizers, including the xanthene dye Rose Bengal (RB) excited by green light (540 nm). Rose Bengal diacetate (RBDA) is a lipophilic RB derivative that is easily taken up by cells and hydrolyzed to produce an active photosensitizer. Because KI is not taken up by microbial cells, it was of interest to see if aPDI mediated by RBDA could also be potentiated by KI. The addition of 100 mM KI strongly potentiated the killing of Gram-positive methicillin-resistant Staphylocccus aureus, Gram-negative Eschericia coli, and fungal yeast Candida albicans when treated with RBDA (up to 15 µM) for 2 hours followed by green light (540 nm, 10 J/cm2). Both RBDA aPDI regimens (400 µM RBDA with or without 400 mM KI followed by 20 J/cm2 green light) accelerated the healing of MRSA-infected excisional wounds in diabetic mice, without damaging the host tissue.
Assuntos
Candida albicans , Staphylococcus aureus Resistente à Meticilina , Fármacos Fotossensibilizantes , Iodeto de Potássio , Rosa Bengala , Infecções Estafilocócicas , Cicatrização , Animais , Rosa Bengala/farmacologia , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Cicatrização/efeitos dos fármacos , Iodeto de Potássio/farmacologia , Camundongos , Candida albicans/efeitos dos fármacos , Fármacos Fotossensibilizantes/farmacologia , Infecções Estafilocócicas/tratamento farmacológico , Infecções Estafilocócicas/microbiologia , Escherichia coli/efeitos dos fármacos , Diabetes Mellitus Experimental/microbiologia , Diabetes Mellitus Experimental/tratamento farmacológico , Fotoquimioterapia/métodos , Sinergismo Farmacológico , Luz , MasculinoRESUMO
This report describes an environmentally benign synthesis of 1,2,3-benzotriazines through an iodide-catalyzed electro-oxidative N-centered [1,2]-rearrangement of 3-aminoindazoles. The developed method demonstrates the activation of heteroatoms via electrochemically generated reactive iodide species without using any metal catalysts and peroxides. The protocol features practical and mild reaction conditions and displays a wide substrate scope. Various mechanistic experiments and cyclic voltammetric studies have been instrumental in elucidating the reaction mechanism, operating via a skeletal rearrangement of 3-aminoindazoles.
RESUMO
Understanding the interaction between fullerene (C60) and perovskite surfaces is pivotal for advancing the efficiency and stability of perovskite solar cells. In this study, we investigate the adsorption behavior of C60 on methylammonium lead iodide (MAPbI3) surfaces using periodic density functional theory calculations. We explore various surface terminations and defect configurations to elucidate the influence of surface morphology on the C60-perovskite interaction, computing the adsorption energy and transfer of charge. Our results reveal distinct adsorption energies and charge transfer mechanisms for different surface terminations, shedding light on the role of surface defects in modifying the electronic structure and stability of perovskite materials. Furthermore, we provide insights into the potential of C60 to passivate surface defects, playing a relevant role in the surface reconstruction after the formation of defects. This comprehensive understanding of C60-perovskite interactions offers valuable guidelines about the role of fullerenes on surface structure and reconstruction.
RESUMO
The insertion of carbonyl into C(sp2)-Pd(II) σ-bond (Grignard-type addition) was not established until the 1990s. While this elemental reaction has been well explored since then, its application in Pd(0) asymmetric catalysis remain elusive. Herein, we report the Pd(0)-catalyzed asymmetric intramolecular Grignard-type reaction of vinyl iodide-carbonyl in the presence of HCO2H additive, affording cyclic allylic alcohol with good to excellent enantioselectivity and diastereoselectivity. Mechanistic studies suggested that besides serving as an efficient reductant, HCO2H is also capable of facilitating protonation of the involved secondary alkoxyl-Pd(II), thus completely suppressing the ß-H elimination. Moreover, no KIE was found in the competing reaction between vinyl iodide-aldehyde and 1-deuterated one, demonstrating the facile step of aldehyde insertion.
RESUMO
The valence band electronic structure of isolated silver iodide nanoparticles (AgI NP) was investigated by vacuum-ultraviolet aerosol photoelectron spectroscopy using the velocity map imaging technique (VUV VMI-PES). The VUV VMI-PES results were obtained for polydisperse aerosol produced by aggregation of hydrocolloid of silver iodide particles 8-15â nm in size. The ionization energy of the AgI particles was found to be 6.0±0.1â eV with respect to the vacuum level. The DFT calculations showed that the main contribution to the density of AgI electronic states in the valence region originates from I 5p orbitals. The dependence of the asymmetry parameter on the electron energy showed that the value of the characteristic energy loss of excited photoelectrons was 2.7â eV, which coincided with the band gap of the nanomaterial.
RESUMO
A series of nanosilica/AgI composites was synthesized by inâ situ reactions between silver nitrate and ammonium iodide deposited on the nanosilica surface using the gas-phase solvate-stimulated mechanosorption modification (GSSMSM) under both dry and wet conditions. The characterization of the synthesized materials was performed by X-ray diffraction (XRD), SEM/EDX (Scanning Electron Microscopy-Energy Dispersive X-ray), thermogravimetric (TGA) and gas sorption methods. As a result of the mechanosorption modification of nanosilica, the bulk density of the samples synthesized in the dry and wet medium increases from 45â g/l for initial nanosilica to 249â g/l and 296â g/l for the modified samples, respectively. The specific surface area of the composites decreased in compared to the nanosilica precursor. The SEM data showed a denser aggregate structure of the nanocomposites compared to the initial nanosilica. The XRD, SEM/EDX and TEM/EDX data indicated the formation of AgI clusters. The AgI particle size was in the range of 6-45â nm. The ice-forming activity of the AgI-containing samples was examined as well. The sample with a smaller size of silver iodide on the surface exhibited superior ice-forming properties, and considering the quantity of utilized AgI, the prepared samples hold promise for application in this field.
RESUMO
Itraconazole (ITZ) is the most used drug to treat feline sporotrichosis; however, little is known about its pharmacokinetics in cats with this mycosis. The aim of this study was to determine plasma ITZ concentrations in cats with sporotrichosis treated with ITZ as monotherapy or in combination with potassium iodide (KI). Cats diagnosed with sporotrichosis received orally ITZ (100 mg/cat/day) or combination therapy with ITZ (100 mg/cat/day) and KI (2.5-5 mg/kg/day) in the case of worsening or stagnation of the clinical condition. At each monthly visit, blood samples were collected at an interval of 4 h for analysis of trough and peak plasma ITZ concentrations by HPLC. Clinical features and laboratory parameters were evaluated during follow-up. Sixteen cats were included in the study. The median plasma ITZ concentration of all cats was 0.75 µg/mL. The median plasma ITZ concentration was 0.5 µg/mL in cats that received ITZ monotherapy (n = 12) and 1.0 µg/mL in those treated with ITZ + KI (n = 4). The clinical cure rate was 56.3% (n = 9) and the median treatment duration was 8 weeks. Nine cats (56.3%) developed adverse clinical reactions, and hyporexia was the most frequent (n = 8; 88.9%). Serum alanine aminotransferase was elevated in four cats (25%). The median plasma ITZ concentration detected in cats was considered to be therapeutic (>0.5 µg/mL) and was reached after 4 weeks of treatment. Plasma ITZ concentrations were higher in cats that received ITZ + KI compared to those treated only with ITZ, suggesting pharmacokinetic synergism between these drugs.
Itraconazole is the most common therapy for feline sporotrichosis, and combination therapy with potassium iodide is used in nonresponsive cases. Our study showed that all cats achieved a therapeutic plasma concentration of itraconazole, with higher levels in cats treated with the combination therapy.
Assuntos
Antifúngicos , Doenças do Gato , Itraconazol , Iodeto de Potássio , Esporotricose , Animais , Gatos , Esporotricose/tratamento farmacológico , Esporotricose/veterinária , Esporotricose/sangue , Itraconazol/sangue , Itraconazol/farmacocinética , Itraconazol/administração & dosagem , Itraconazol/uso terapêutico , Doenças do Gato/tratamento farmacológico , Doenças do Gato/sangue , Doenças do Gato/microbiologia , Antifúngicos/farmacocinética , Antifúngicos/sangue , Antifúngicos/uso terapêutico , Antifúngicos/administração & dosagem , Masculino , Iodeto de Potássio/uso terapêutico , Iodeto de Potássio/administração & dosagem , Iodeto de Potássio/farmacocinética , Feminino , Resultado do Tratamento , Quimioterapia Combinada , Administração Oral , Plasma/químicaRESUMO
Iodine is a trace element required to produce the thyroid hormones, which are critical for development, growth and metabolism. To ensure appropriate population iodine nutrition, convenient and accurate methods of monitoring are necessary. Current methods for determining iodine status either involve a significant participant burden or are subject to considerable intra-individual variation. The continuous secretion of iodide in saliva potentially permits its use as a convenient, non-invasive assessment of status in populations. To assess its likely effectiveness, we reviewed studies analysing the association between salivary iodide concentration (SIC) and dietary iodine intake, urinary iodide concentration (UIC) and/or 24-h urinary iodide excretion (UIE). Eight studies conducted in different countries met the inclusion criteria, including data for 921 subjects: 702 healthy participants and 219 with health conditions. SIC correlated positively with UIC and/or UIE in four studies, with the strength of relationship ranging from r = 0·19 to r = 0·90 depending on sampling protocol, age, and if salivary values were corrected for protein concentration. Additionally, SIC positively correlated with dietary intake, being strongest when saliva was collected after dinner. SIC varied with external factors, including thyroid function, use of some medications, smoking and overall health status. Evidence provided here supports the use of SIC as a viable, low-burden method for determining iodine status in populations. However, small sample sizes and high variability indicates the need for more extensive analyses across age groups, ethnicities, disease states and dietary groups to clarify the relative accuracy and reliability in each case and standardise procedure.
Assuntos
Homeostase , Iodetos , Iodo , Estado Nutricional , Saliva , Humanos , Iodo/análise , Iodo/urina , Saliva/química , Saliva/metabolismo , Iodetos/análise , Iodetos/metabolismo , Feminino , Dieta , Masculino , Adulto , Pessoa de Meia-Idade , IdosoRESUMO
Ions containing iodine atoms at the vapor-aqueous solution interfaces critically affect aerosol growth and atmospheric chemistry due to their complex chemical nature and multivalency. While the surface propensity of iodide ions has been intensely discussed in the context of the Hofmeister series, the stability of various ions containing iodine atoms at the vapor-water interface has been debated. Here, we combine surface-specific sum-frequency generation (SFG) vibrational spectroscopy with ab initio molecular dynamics simulations to examine the extent to which iodide ions cover the aqueous surface. The SFG probe of the free O-D stretch mode of heavy water indicates that the free O-D group density decreases drastically at the interface when the bulk NaI concentration exceeds â¼2 M. The decrease in the free O-D group density is attributed to the spontaneous appearance of triiodide that covers the topmost interface rather than to the surface adsorption of iodide. This finding demonstrates that iodide is not surface-active, yet the highly surface-active triiodide is generated spontaneously at the water-air interface, even under dark and oxygen-free conditions. Our study provides an important first step toward clarifying iodine chemistry and pathways for aerosol formation.