Oxygenation of Earth's atmosphere induced metabolic and ecologic transformations recorded in the Lomagundi-Jatuli carbon isotopic excursion.

The oxygenation of Earth's atmosphere represents the quintessential transformation of a planetary surface by microbial processes. In turn, atmospheric oxygenation transformed metabolic evolution; molecular clock models indicate the diversification and ecological expansion of respiratory metabolisms in the several hundred million years following atmospheric oxygenation. Across this same interval, the geological record preserves 13C enrichment in some carbonate rocks, called the Lomagundi-Jatuli excursion (LJE). By combining data from geologic and genomic records, a self-consistent metabolic evolution model emerges for the LJE. First, fermentation and methanogenesis were major processes remineralizing organic carbon before atmospheric oxygenation. Once an ozone layer formed, shallow water and exposed environments were shielded from UVB/C radiation, allowing the expansion of cyanobacterial primary productivity. High primary productivity and methanogenesis led to preferential removal of 12C into organic carbon and CH4. Extreme and variable 13C enrichments in carbonates were caused by 13C-depleted CH4 loss to the atmosphere. Through time, aerobic respiration diversified and became ecologically widespread, as did other new metabolisms. Respiration displaced fermentation and methanogenesis as the dominant organic matter remineralization processes. As CH4 loss slowed, dissolved inorganic carbon in shallow environments was no longer highly 13C enriched. Thus, the loss of extreme 13C enrichments in carbonates marks the establishment of a new microbial mat ecosystem structure, one dominated by respiratory processes distributed along steep redox gradients. These gradients allowed the exchange of metabolic by-products among metabolically diverse organisms, providing novel metabolic opportunities. Thus, the microbially induced oxygenation of Earth's atmosphere led to the transformation of microbial ecosystems, an archetypal example of planetary microbiology.IMPORTANCEThe oxygenation of Earth's atmosphere represents the most extensive known chemical transformation of a planetary surface by microbial processes. In turn, atmospheric oxygenation transformed metabolic evolution by providing oxidants independent of the sites of photosynthesis. Thus, the evolutionary changes during this interval and their effects on planetary-scale biogeochemical cycles are fundamental to our understanding of the interdependencies among genomes, organisms, ecosystems, elemental cycles, and Earth's surface chemistry through time.

Characterization of a Novel TiF4 Inclusion Complex and in vitro Evaluation of Its Effect on Inhibiting Enamel Demineralization.

INTRODUCTION: Titanium tetrafluoride (TiF4) is an anticariogenic agent with high remineralizing potential. However, the acidic pH of TiF4 solution can limit its clinical application. The present study aimed to prepare and characterize a new TiF4-dendrimer inclusion complex and evaluate its ability to inhibit enamel demineralization under pH cycling conditions. METHODS: PEG-citrate dendrimer and TiF4-dendrimer inclusion complex were synthesized and their molecular structures were evaluated using Fourier-transform Infrared Spectroscopy (FTIR), Hydrogen Nuclear Magnetic Resonance (HNMR), and Liquid Chromatography-Mass Spectrometry (LC-MS) tests. Forty-eight enamel samples were prepared and randomly divided into four groups: distilled water (negative control), TiF4 solution (T), dendrimer solution (D), and TiF4-dendrimer solution (TD). The microhardness of the samples was measured initially. Next, the samples underwent pH cycling, were exposed to the solutions, the microhardness was measured again, and microhardness loss was calculated. EDX analysis was performed on the surface and cross-sectional segments of the samples. RESULTS: The microhardness loss was significantly higher in control (-65.1 ± 6.0) compared to other groups. No significant difference was observed between T (-47.9 ± 5.6) and D (-41.7 ± 12.0) and also D and TD (-40.5 ± 9.4) in this regard. Microhardness loss was significantly higher in T compared to TD group. The TD samples showed similar fluoride and titanium content in both surface and subsurface regions, while the T group had higher concentrations in the surface region. Moreover, the TD solution had a higher pH of 3.4 compared to the T solution's pH of 1.1. CONCLUSION: No significant difference was observed between the efficacy of TiF4-dendrimer and TiF4 solution in inhibiting demineralization while TiF4-dendrimer solution had the added advantage of having a higher pH.

High-Resolution Characterization of Enamel Remineralization Using Time-of-Flight Secondary Ion Mass Spectrometry and Electron Microscopy.

INTRODUCTION: The aim of this in vitro study was to assess the suitability of high-resolution time-of-flight secondary ion mass spectrometry (ToF-SIMS) for visualizing cross-sectional changes in human enamel microstructure and chemical composition during treatment and remineralization cycling of artificially generated caries lesions underneath an artificial plaque. METHODS: Treatments consisted of exposure to twice daily toothpaste/water slurries prepared from 0, 1,100, and 5,000 µg/g fluoride (F) NaF/silica toothpastes. In addition, treatments with slurries prepared from 1,100 µg/g F SnF2/silica toothpastes were done using 44Ca in the remineralization solution to allow for differentiation of newly formed mineral and exploration of incorporated metal dopants using ToF-SIMS. Complementary microhardness, scanning electron microscopy, and high-resolution transmission electron microscopy (HR-TEM) investigations were performed on enamel cross sections. RESULTS: HR-TEM was used for the first time to determine the change in crystallinity during remineralization revealing distinct microstructural zones within one lesion. Chemical mapping using ToF-SIMS demonstrated that the distribution of F, while observed primarily in the new mineral phase, was widespread throughout the lesion with 44Ca substantially limited to the remineralizing mineral. Both penetrated the inter-rod spaces of the sound enamel illustrating how acid damage propagates into the native mineral as the caries lesion deepens. HR-TEM examination revealed different regions within the lesion characterized by distinct micro- and ultrastructures. Importantly, HR-TEM revealed a return of crystallinity following remineralization. F dose-response observations verified the ability of these high-resolution techniques to differentiate remineralization efficacy. CONCLUSION: The collective results provided new insights such as the visualization of F or calcium penetration pathways, as well as new tools to study the caries process.

Clinical and ex-vivo effect of LASERs on prevention of early-enamel caries: systematic review & meta-analyses.

To investigate the in vivo and in situ effect of different types of lasers in prevention of enamel demineralization in high caries risk cases (around orthodontic brackets, around restoration and in caries susceptible pits and fissures). PubMed was searched using the following keyword sequence; (Laser therapy OR laser irradiation OR laser application) AND (enamel caries prevention OR enamel demineralization OR enamel remineralization OR early enamel caries OR early-enamel caries OR enamel resistance OR enamel decalcification OR white spot lesions WSLs OR incipient lesion OR enamel decay OR enamel Dissolution OR enamel microhardness) AND (clinical trial OR Randomized clinical trial OR In situ study). The latest literature search was ended by "30 January 2023". PubMed was used as a primary data base for study selection. Scopus, EBSCO, and Google scholar are checked in our study after results of systematic search on PubMed. Only duplicates were found. Two meta-analyses were carried out. The first, clinical meta-analysis on incidence of white spot lesions (WSLs) following CO2 laser irradiation of enamel. The second meta-analysis on ex-vivo/in situ effect of CO2 laser on microhardness of enamel. In each meta-analysis three studies were included. Risk of bias was assessed. The search identified eight studies (four ex-vivo and four clinical trials). Regarding the clinical meta-analysis, the overall standardized mean difference was 0.21 [ 95% confidence interval (CI): 0.15-0.30, p < 0.00001]. This indicates that the incidence of new WSLs in patients who received low power CO2 laser treatment was highly significantly lower than placebo groups. The heterogeneity was considerable (I2 = 71%). In the second meta-analysis, the overall standardized mean difference was 49.55 [ 95% confidence interval (CI): 37.74, 61.37, p < 0.00001]. This indicates that microhardness of enamel receiving low power (0.4-5 W) CO2 laser irradiation is highly significantly lower than control untreated enamel. The heterogeneity was substantial (I2 = 48%). Within the limitations of this study, Low level laser therapy concept with CO2 laser seems to be effective in preventing enamel caries.Prospero registration number: CRD42023437379.

Assessing the impact of different Urushiol primer solvents on dentin remineralization and bond strength.

OBJECTIVES: To investigate urushiol's potential as a dentin cross-linking agent, promoting remineralization of etched dentin and preventing activation of endogenous proteases causing collagen degradation within the hybrid layer. The goal is to improve bond strength and durability at the resin-dentin interface. METHODS: Urushiol primers with varying concentrations were prepared using ethanol and dimethyl sulfoxide (DMSO) as solvents. Dentin from healthy molars underwent grinding and acid etching for 15 s, followed by a 1min application of urushiol primer. After 14 and 28 days of remineralization incubation and remineralization were used to assess by Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR-FTIR), Micro-Raman spectroscopy, X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), Vickers Hardness, Scanning Electron Microscopy (SEM), and Energy X-ray dispersive spectroscopy (EDS). The overall performance of urushiol primers as dentin adhesives was observed by microtensile bond strength (µTBS) testing and nanoleakage assessment. Investigated the inhibitory properties of the urushiol primers on endogenous metalloproteinases (MMPs) utilizing in situ zymography, and the cytotoxicity of the primers was tested. RESULTS: Based on ATR-FTIR, Raman, XRD, EM-EDS and Vickers hardness analyses, the 0.7%-Ethanol group significantly enhanced dentin mineral content and improved mechanical properties the most. Pretreatment notably increased the µTBS of restorations, promoted the stability of the mixed layer, and reduced nanoleakage and MMPs activity after 28 days. SIGNIFICANCE: The urushiol primer facilitates remineralization in demineralized dentin, enhancing remineralization in etched dentin, effectively improving the bonding interface stability, with optimal performance observed at a 0.7 wt% concentration of the urushiol primer.

Effect of a calcium silicate cement and experimental glass ionomer cements containing calcium orthophosphate particles on demineralized dentin.

OBJECTIVE: The study aims to evaluate the effect of a glass ionomer cement (GIC; Fuji 9 Gold Label, GC) with added calcium orthophosphate particles and a calcium silicate cement (CSC; Biodentine, Septodont) regarding ion release, degradation in water, mineral content, and mechanical properties of demineralized dentin samples. METHODS: GIC, GIC + 5% DCPD (dicalcium phosphate dihydrate), GIC + 15% DCPD, GIC + 5% ß-TCP (tricalcium phosphate), GIC + 15% ß-TCP (by mass), and CSC were evaluated for Ca2+/Sr2+/F- release in water for 56 days. Cement mass loss was evaluated after 7-day immersion in water. Partially demineralized dentin disks were kept in contact with materials while immersed in simulated body fluid (SBF) at 37 °C for 56 days. The "mineral-to-matrix ratio" (MMR) was determined by ATR-FTIR spectroscopy. Dentin hardness and elastic modulus were obtained by nanoindentation. Samples were observed under scanning and transmission electron microscopy. Data were analyzed by ANOVA/Tukey test (α = 0.05). RESULTS: Ca2+ release from CSC and GIC (µg/cm2) were 4737.0 ± 735.9 and 13.6 ± 1.6, respectively. In relation to the unmodified GIC, the addition of DCPD or ß-TCP increased ion release (p < 0.001). Only the dentin disks in contact with CSC presented higher MMR (p < 0.05) and mechanical properties than those restored with a resin composite used as control (p < 0.05). Mass loss was similar for GIC and CSC; however, the addition of DCPD or ß-TCP increased GIC degradation (p < 0.05). CONCLUSION: Despite the increase in ion release, the additional Ca2+ sources did not impart remineralizing capability to GIC. Both unmodified GIC and CSC showed similar degradation in water. CLINICAL RELEVANCE: CSC was able to promote dentin remineralization.

Effect of the use of bromelain associated with bioactive glass-ceramic on dentin/adhesive interface.

OBJECTIVES: To evaluate the effect of bromelain associated with Biosilicate on the bond strength (BS) of a universal adhesive system to sound (SD) and caries-affected dentin (CAD), and on the proteolytic activity. MATERIALS AND METHODS: Cavities were prepared in 360 molars, half submitted to cariogenic challenge. Teeth were separated into groups (n=20): Control-No treatment; CHX-0.12% chlorhexidine; NaOCl-5% sodium hypochlorite; Br5%-5% bromelain; Br10%-10% bromelain; Bio-10% Biosilicate; NaOClBio-NaOCl+Bio; Br5%Bio-Br5%+Bio; Br10%Bio-Br10%+Bio. Following treatments, the adhesive system was applied, and cavities were restored. Samples were sectioned into sticks and stored at 37 °C for 24 h, 6 months, and 1 year. Microtensile BS (2-way ANOVA, Bonferroni's test, α=0.05), fracture patterns (SEM), and adhesive interfaces (TEM) were evaluated. Bacterial collagenase assay and in situ zymography were performed. RESULTS: In CAD, Br10% presented higher BS (p=0.0208) than Br5%Bio. Br5% presented higher BS (p=0.0033) after 6 months than after 24 h; and association of treatments, higher BS (p<0.05) after aging than after 24 h. Mixed fractures were the most prevalent. Association of treatments promoted a more uniform hybrid layer with embedded Bio particles. Experimental groups presented lower (p<0.0001) relative fluorescence units than Control. Bromelain, associated or not with Bio, showed collagenolytic degradation. CONCLUSIONS: Bromelain associated with Biosilicate did not affect the BS to SD. In CAD, Br5%Bio decreased immediate BS but had no long-term influence. This association decreased the proteolytic activity. CLINICAL RELEVANCE: Bromelain and Biosilicate may enhance the longevity of adhesive restorations by inhibiting endogenous proteases.

Remineralization of post-orthodontic white spot lesions with a fluoride varnish and a self-assembling P 11 - 4 peptides: a prospective in-vivo-study.

OBJECTIVE: The objective was to evaluate the remineralization effects of fluoride varnish (Clinpro White varnish), self-assembling peptide (Curodont™ Repair) and their combined use on WSL after orthodontic treatment. MATERIALS AND METHODS: Thirty-two subjects, aged of 10-18 (mean age 13.91 ± 2.92) with 107 post-orthodontic WSL were included in the study. Subjects were divided into four groups as control, tricalcium phosphate (TCP) containing fluoride varnish (Clinpro White varnish) group, self-assembling P11-4 peptides (Curodont™ Repair) group and combined application of the two products. At the beginning, each subjects' caries risk profile was assessed by evaluating diet cariogenicity, plaque index, gingival bleeding index and stimulated salivary flow rate. Before the application of the remineralization agents, WSL baseline demineralization values were determined with QLF Inspektor™ Pro, laser fluorescence using DIAGNOdent and color values were measured by Vita EasyShade. Remineralization data were obtained by measuring ΔF, ΔQ, and lesion area with QLF. The aesthetic improvement after the remineralization process was evaluated with a spectrophotometer at six weeks, three and six months. RESULTS: No statistically significant differences were found between the groups in terms of criteria determining patients' caries risk profiles, DIAGNOdent data, and plaque index scores (p > 0.05). Intra-group evaluation following remineralization revealed statistically significant increases in ΔF and ΔQ with a decrease in lesion area for the fluoride varnish group at six months, for the peptide group at three months, and for the combined application group at three and six months (p < 0.05). In inter-group comparisons, ΔF and ΔQ values were found to be statistically significant only in the fluoride group at six months compared to the other groups (p < 0.05). While the L* value decreased significantly in all groups at six months, a statistically significant difference in ΔE* values was observed only in the control group between three and six months. CONCLUSION: Fluoride varnish with TCP showed highest remineralization at 6 months, and the remineralization was positively affected in the short term (three months) after the use of self-assembling P11-4 peptides and their combined application. CLINICAL RELEVANCE: Remineralization obtained after single application of agents tested in six months in-vivo showed parallel results. In an attempt to trigger subsurface remineralization, the combined use of fluoride with self-assembling peptides as biomimetic remineralization agent needs further evaluation.

Evaluation of the remineralization potential of self-assembling peptide P11-4 with fluoride compared to fluoride varnish in the management of incipient carious lesions: a randomized controlled clinical trial.

OBJECTIVES: The present trial's aim was to compare the remineralization potential of self-assembling peptide P11-4 combined with fluoride to that of fluoride varnish. MATERIALS AND METHODS: Twenty-eight participants with 58 incipient carious lesions were enrolled in the present trial. Participants were randomly divided into two groups with 14 participants and 29 incipient lesions in each group. Patients were assigned either to self-assembling peptide combined with fluoride (Curodont Repair Fluoride Plus™) or sodium fluoride varnish (NaF, Bifluorid 10) groups. Both agents were applied according to the manufacturer's instructions on non-cavitated incipient carious lesions. Lesions were assessed by two calibrated and blinded assessors at baseline, and after one-, three- and six-months using a laser fluorescence device (DIAGNOdent). RESULTS: Although laser fluorescence scores significantly improved in both groups over time (p < 0.05), no notable differences were evident between both groups at one-month (p > 0.05). Yet, at three- and six-months statistically lower laser fluorescence readings were evident in the self-assembling peptide combined with fluoride group in comparison to the fluoride alone group (p < 0.05). There was 60% less risk for caries progression for Curodont Repair Fluoride Plus™ when compared to NaF varnish after six months. Self-assembling peptide combined with fluoride was able to change 65.5% of non-cavitated carious lesions from DIAGNOdent score 3 (11-20) to score 1 (0-4). Fluoride varnish was able to change 13.8% of the lesions from score 3 to score 1 after six months. CONCLUSIONS: The self-assembling peptide combined with fluoride varnish showed higher remineralization potential than fluoride varnish alone for incipient carious lesions over a six-months follow up. CLINICAL RELEVANCE: The combination of self-assembling peptide P11-4 and fluoride could offer a new tool in managing incipient carious lesions.

Mechanical properties of simulated dentin caries treated with metal cations and L-ascorbic acid 2-phosphate.

This pH cycling study aimed to investigate the effects of L-Ascorbic acid 2-phosphate (AA2P) salts of Mg, Zn, Mn, Sr, and Ba on the surface microhardness, compressive strength, diametral tensile strength (DTS), and solubility of root canal dentin. 186 cylindrical dentin specimens from 93 teeth were fortified with optimal concentrations of AA2P salts of Mg (0.18 mM), Zn (5.3 µM), Mn (2.2 × 10-8 M), Sr (1.8 µM), and Ba (1.9 µM). Saline was used as the control group. These dentin specimens underwent a 3-day cycling process simulating dentin caries formation through repeated sequences of demineralization and remineralization. Surface microhardness at 100 and 500 µm depths (n = 10/subgroup), scanning electron microscopy (n = 3/group), compressive strength (n = 10/group), DTS (n = 6/group), and solubility (n = 5/group) tests were performed to analyze the dentin specimens. Data were analyzed using Kolmogorov-Smirnov, one-way ANOVA, and Post Hoc Tukey tests (p < 0.05). The control group had significantly lower microhardness at both depths (p < 0.001), reduced DTS (p = 0.001), decreased compressive strength (p < 0.001), and higher weight loss (p < 0.001) than all other groups. The Sr group had the highest compressive strength and microhardness among all the groups. The microhardness was significantly higher for the 500 µm depth than the 100 µm depth (p < 0.001), but the difference in microhardness between depths across groups was not significant (p = 0.211). All fortifying solutions provided some protection against artificial caries lesions. Therefore, these elements might have penetrated and reinforced the demineralized dentin against acid dissolution.

Biomineralization and remineralizing potential of toothpastes containing nanosized ß-calcium glycerophosphate: an in vitro study.

To evaluate the effect of 1100 ppm F toothpastes supplemented with micrometric or nanosized ß-CaGP (ß-CaGPm/ß-CaGPn) on artificial enamel remineralization, using a pH cycling model. Enamel blocks with artificial caries were randomly allocated into ten groups (n = 10), according to the toothpastes: without fluoride/ß-CaGPm/ß-CaGPn (negative control); 1100 ppm F (1100F); 1100F plus 0.125%, 0.25%, 0.5%, and 1.0% of ß-CaGPm or ß-CaGPn. The blocks were treated 2×/day with slurries of toothpastes. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); integrated mineral loss (ΔIMR); fluoride (F), calcium (Ca), and phosphorus (P) concentrations in the enamel; polydispersity index (PdI); and zeta potential (Zp) were determined. The data were analyzed by ANOVA (p < 0.001). For Zp/PdI, no significance was observed when comparing the means (p > 0.001). The treatment with 1100F-0.25%ß-CaGPn led to %SHR ∼57 higher when compared to the 1100F group (p < 0.001). The lowest ΔKHN was observed for the 1100F-0.25%ß-CaGPn group (p < 0.001). The ΔIMR was lower (∼201%) for the 1100F-0.25%ß-CaGPn when compared to 1100F (p < 0.001). The association of ß-CaGPm and ß-CaGPn to 1100F did not influence its F concentration (p > 0.001). The highest increase in Ca and P was observed for 1100F-0.25%ß-CaGPn (p < 0.001). The addition of 0.25%ß-CaGPn to 1100F toothpaste was able to promote an additional remineralizing effect of artificial caries lesions.

Examining enamel-surface demineralization upon exposure to acidic solutions and the remineralization potential of milk and artificial saliva.

The enamel surface may undergo demineralization due to exposure to acidic substances and the remineralization of the etched enamel is crucial to regain or maintain integrity. This study aimed to investigate the erosive effect of 10 acidic solutions on tooth enamel and the remineralization capacity of milk and artificial saliva by measuring surface roughness (Ra), enamel depth, and microhardness. A total of 80 bovine incisor enamel specimens were immersed in 10 different acidic solutions, including four different acidic drinks, three different citric acid solutions, and three different citric acid buffer solutions, for 1 h. After demineralization, the specimens were immersed in milk and artificial saliva for 3 h. Surface roughness, enamel abraded depth, and microhardness were measured before demineralization, in-between time intervals and after remineralization. Data were analyzed using Friedman and Kruskal-Wallis tests (p < 0.05). The results indicate a significant difference in surface roughness between the measurements taken at different time intervals, particularly between the baseline and after 1 h demineralization. Also, the specimens immersed in CAB1 exhibited greatest increase in Ra among other acidic solutions (Δ: 0.18 ± 0.07). Moreover, only the microhardness increased after remineralization (p < 0.05). Enamel demineralization using various acidic solutions revealed increased Ra and enamel abraded depth, and decreased microhardness. The use of remineralization agents, milk and artificial saliva, demonstrated an increase in microhardness. This study provides insights into the effects of different acidic solutions and potential remineralization agents on tooth enamel.

Ultrastructural investigation of the effect of toothpastes containing different remineralizing agents on demineralized enamel.

OBJECTIVE: The present study aimed to evaluate the effect of remineralizing agents on demineralized enamel intended for use as fluoride substitutes or supplements for oral hygiene applications. METHODOLOGY: Enamel samples were obtained from 30 bovine teeth. The enamel blocks were stored in 20 mL of demineralization solution for 72 h. They were then brushed with the following toothpaste for the remineralization protocol: NaF, NaF/SnF2 combination, NovaMin, or nano-hydroxyapatite. SEM/EDX examinations and microhardness measurements of the samples were performed to investigate the remineralization efficacy of the studied toothpaste. One-way analysis of variance (ANOVA) with post hoc Tukey's HSD test was used to analyze the change in microhardness values in different remineralization protocols (p < 0.05). RESULTS: Differences in the mean remineralization (%RP) and hardness recovery (%HR) were determined between the groups (p < 0.05). Groups 1 and 4 showed significant differences in %RP (p < 0.05). In the SEM/EDX examinations, the samples treated with n-HAp showed an accumulation of crystal deposits on the enamel surface, although at a lower density than those treated with NaF and NaF/SnF2 combination. CONCLUSION: The remineralization strategy in toothpaste plays an important role in enamel remineralization. NovaMin-containing toothpaste showed positive effects on the enamel surface with better Ca/P ratio. Toothpastes containing n-HAp triggered less change in the increase of microhardness values compared to other toothpastes. The use of SnF2 in toothpaste in combination with NaF significantly increased the binding of fluoride to demineralized enamel compared to toothpaste containing NaF alone.

Remineralization efficiency of three different agents on artificially produced enamel lesions: A micro-CT study.

OBJECTIVE: This study aimed to assess the remineralization efficacy of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), silver diamine fluoride/potassium iodide (SDF/KI), and sodium fluoride with functionalized tricalcium phosphate (NaF/fTCP) on artificial early enamel lesion using laser fluorescence and micro-CT analysis. METHODOLOGY: On extracted impacted third molars, artificial enamel lesions were prepared. Twenty-eight specimens were randomly assigned to four groups (n = 7 per group): a control group (artificial saliva), CPP-ACP (GC Tooth Mousse), SDF/KI (Riva Star), and NaF/fTCP (Clinpro White varnish). Following the manufacturer's instructions, the remineralization agents were applied to demineralized surfaces. Laser fluorescence and micro-CT were used to evaluate the remineralization efficacy of the agents and analyzes were performed during four stages: before demineralization, after demineralization, 1st day of remineralization and 30th day of remineralization. Shapiro-Wilk test, repeated measures two-way ANOVA, and Spearman correlation tests were used for statistical analysis. A significant level of p < 0.05 was established. RESULTS: SDF/KI significantly reduced the lesion area and lesion volume on the demineralized enamel surface after 30 days of remineralization. In the T3 period, SDF/KI increased the mineral density statistically significantly compared to the T1 period. The laser fluorescence values for all three remineralizing agents exhibited a linear decrease. A significant correlation between the fluorescence values and the mineral density was found (p = 0.01). CONCLUSION: All three investigated agents were showed positive remineralization efficacy on artificial enamel lesion. However, SDF/KI, containing silver diamine fluoride and potassium iodide exhibited superior than other agents in promoting remineralization. CLINICAL SIGNIFICANCE: Although all three remineralization agents showed positive remineralization efficacy on artificial enamel lesions, SDF had higher remineralization performance over the other two agents. SDF has potential to prevent progression of demineralization in treating children with high caries risk in the long-term.

In vitro caries-preventive effect of a mineralization-promoting peptide combined with fluoride gel on sound primary teeth.

BACKGROUND: Mineralization-promoting peptide-3 (MPP3) is a new biomimetic remineralization agent. AIM: To assess the remineralization efficiency of MPP3, either alone or in combination with fluoride gel. DESIGN: The samples were divided into four groups: control, 1.23% fluoride gel, 10% MPP3 gel, and 1.23% fluoride gel + 10% MPP3. Following the application of remineralization agents (4 min), the samples remained in a pH-cycling model (37°C, 4 weeks). Microhardness, microcomputed tomography (micro-CT), polarized light microscopy (PLM), and field emission scanning electron microscopy (FE-SEM) analysis were conducted. RM-ANOVA, one-way ANOVA, and intraclass correlation coefficient (ICC) were used for statistical analysis, and a significance level of p < .05 was employed. RESULTS: Mineralization-promoting peptide 3 and fluoride gel + MPP3 increased the microhardness of the enamel compared with initial values in each group (p < .05). Mineralization-promoting peptide 3 successfully maintained the mineral density of enamel, although the cariogenic pH-cycling and PLM results indicated that the lesion depth (µm) was significantly lower in the fluoride gel + MPP3 group (27.0336 ± 12.53650) than in the control group (37.3907 ± 12.76002, p < .05). CONCLUSION: The combined use of MPP3 with fluoride gel enhanced the caries-protective and mineralization-promoting effects of fluoride. Mineralization-promoting peptide 3 may be a potential agent that can be employed to improve the physical properties of enamel.

Remineralizing effect of NSF on artificial enamel caries.

INTRODUCTION: Nanotechnology offers new approaches and endless opportunities for remineralizing tooth decay without being toxic or causing allergies. This study aimed to determine the effect of nanosilver fluoride (NSF) on the remineralization potential of enamel caries-like lesions compared to 5% sodium fluoride varnish in permanent teeth. METHODS: Fifteen teeth (molars and premolars) were gathered, cleaned, and polished using a scaler. After sectioning the teeth mesiodistally and removing the roots, the thirty specimens were subjected to a demineralized solution to induce early enamel lesions and then assigned randomly into two equal groups. The test materials were applied, and then all the specimens were subjected to a pH cycling model for 30 days. DIAGNOdent and surface roughness were investigated, and an evaluation of the enamel Ca and P weight% for Ca/P ratio calculation was done using SEM-EDX to analyze the specimens at the end of the study. The data were analyzed using an independent t-test. RESULTS: The mean values for the DIAGNOdent measurements for NSF and NaF at baseline and after demineralization were not significantly different (p > 0.05). After treatment, NaF varnish showed a significantly higher mean DIAGNOdent measurement (11.8 ± 5.80) than NSF (4.7 ± 1.6). The mean surface roughness of the NaF group (1.64 ± 0.39) was much higher than NSF's mean surface roughness (1.07 ± 0.21). Specimens treated with NSF had statistically significant smoother surfaces (p < 0.001). The NSF group had a higher mean Ca/P ratio (2.9 ± 0.35) than NaF (2.2 ± 0.11). This difference was statistically significant (p = 0.012). CONCLUSION: The study reveals that nano silver fluoride is a more effective treatment than sodium fluoride varnish in enhancing teeth's clinical characteristics, particularly in terms of mineral content and surface roughness, suggesting it could be an improved strategy to prevent dental caries and maintain enamel integrity.

Effect of Biomin F toothpaste and Diode laser on remineralization of white spot lesions (in vitro study).

BACKGROUND: White-spot lesions are considered an initial carious stage characterized by an outer enamel layer with significantly reduced mineralization. This study was conducted to assess the combined effect of Biomin F toothpaste and Diode laser on remineralization of white spot lesions. MATERIALS AND METHODS: An invitro study conducted on a total of 30 premolars divided into three groups; Group A (Biomin F Tooth paste), Group B (Biomin F with laser application for 30 sec), Group C (Negative control). The three groups were submitted to three stages; stage 1:Baseline,stage 2:After demineralization ,and stage 3:After remineralization. In each stage, elemental analysis(calcium, phosphorus, and fluoride)was measured quantitatively using Energy Dispersive X-ray (EDX) analysis and qualitatively by micrographs using scanning electron microscope. The data were tested to find significant difference between mineral changes during stages by using (ANOVA) test and Bonferroni test. RESULTS: Calcium, phosphorus and fluoride ions decreased in all groups after demineralization. In stage 3, after application of remineralizing agents, Calcium ions increased significantly in groups A and B where p<.05. As regards to the phosphorus ions, a significant increase was observed in all groups with group A showed the highest gain as phosphorus level percentage change (%mass) was 56.52±18.02 . Fluoride ions increased significantly in groups A and B (p<0.05) but decreased significantly in group C. There was no statistical significant difference between group A and B (p ≥.05) in calcium, phosphorus, and fluoride level after remineralization. CONCLUSION: Within the limitation of the present study, we concluded that Biomin F toothpaste is promising in the repairing of white spot lesions on the surface of the demineralized enamel. Diode laser did not affect the remineralizing ability of Biomin F toothpaste.

Enamel changes of bleached teeth following application of an experimental combination of chitosan-bioactive glass.

BACKGROUND: Considering the extensive use of bleaching agents and the occurrence of side effects such as enamel demineralization, this study aimed to assess the enamel changes of bleached teeth following the experimental application of chitosan-bioactive glass (CH-BG). METHODS: In this in vitro study, CH-BG (containing 66% BG) was synthesized and characterized by Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Thirty sound human premolars were bleached with 40% hydrogen peroxide, and the weight% of calcium and phosphorus elements of the buccal enamel surface was quantified before and after bleaching by scanning electron microscopy/ energy-dispersive X-ray spectroscopy (SEM, EDX). Depending on the surface treatment of the enamel surface, the specimens were divided into three groups (n = 10): control (no treatment), MI Paste (MI), and CH-BG. Then the specimens were stored in artificial saliva for 14 days. The SEM/EDX analyses were performed again on the enamel surface. Data were analyzed by one-way ANOVA and Tukey's test and a p-value of < 0.05 was considered statistically significant. RESULTS: In all groups, the weight% of calcium and phosphorus elements of enamel decreased after bleaching; this reduction was significant for phosphorus (p < 0.05) and insignificant for calcium (p > 0.05). After 14 days of remineralization, the weight% of both calcium and phosphorus elements was significantly higher compared to their bleached counterparts in both MI and CH-BG groups (p < 0.05). Following the remineralization process, the difference between MI and CH-BG groups was not significant (p > 0.05) but both had a significant difference with the control group in this regard (p < 0.05). CONCLUSIONS: The synthesized CH-BG compound showed an efficacy comparable to that of MI Paste for enamel remineralization of bleached teeth.

Effect of the use of remineralization agents before resin infiltration on the treatment of initial enamel lesions: an in-vitro study.

AIM: This study aimed to evaluate the effect of the use of remineralization agents before the application of resin infiltration on the treatment of initial enamel lesions. MATERIALS AND METHODS: Eighty buccal enamel samples were prepared from human molars, and artificial initial lesions were formed after 96 h of incubation with a demineralizing solution. The samples were randomly divided into 8 groups (n = 10) including a remineralizing agent (Tooth Mousse, Medical Mineral Gel, Remin Pro), resin infiltration (ICON), and a combined treatment of both. Remineralizing agents were applied in pH cycle for 7 days. Baseline, demineralization, and after-treatment fluorescence (FluoreCam and DIAGNOdent Pen), surface microhardness (HMV-2T), surface roughness (M300C), OCT (Maestro-2) and ultrasonic system (Novascope 4500) data were obtained for all groups. The sample surfaces were examined under SEM/EDX (SU3500) at x1000. Data were statistically analyzed using the Two-Way Robust ANOVA and Bonferroni tests (p < 0.05). RESULTS: There was no statistically significant difference between the groups for microhardness, roughness, OCT, DIAGNOdent Pen, ultrasound, and FluoreCam size/intensity values (p = 0.582; p = 0.963; p = 0.884; p = 0.923; p = 0.051; p = 0.268; p = 0.793 respectively). The effect of the treatment procedure showed a significant difference (p < 0.001), except for the roughness values (p = 0.984). The lowest Calcium (Ca) ratio (%atomic) was observed in the RI group in the EDX analysis. CONCLUSION: Remineralizing agents and resin infiltration methods may be used in combination or alone in the treatment of initial enamel lesions. Combining remineralizing agents with resin infiltration does not alter the efficacy of the treatment.

Investigation of mechanical properties, remineralization, antibacterial effect, and cellular toxicity of composite orthodontic adhesive combined with silver-containing nanostructured bioactive glass.

BACKGROUND: The formation of white spots, which represent early carious lesions, is a major issue with fixed orthodontics. The addition of remineralizing agents to orthodontic adhesives may prevent the formation of white spots. The aim of this study was to produce a composite orthodontic adhesive combined with nano-bioactive glass-silver (nBG@Ag) for bracket bonding to enamel and to investigate its cytotoxicity, antimicrobial activity, remineralization capability, and bond strength. METHODS: nBG@Ag was synthesized using the sol-gel method, and characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy with an attenuated total reflectance attachment (ATR-FTIR). The cytotoxicity test (MTT) and antimicrobial activity of adhesives containing 1%, 3%, and 5% (wt/wt) nBG@Ag were evaluated, and the shear bond strength of the adhesives was measured using a universal testing machine. Remineralization was assessed through microhardness testing with a Vickers microhardness tester and scanning electron microscopy (SEM). Statistical analyses were conducted using the Shapiro-Wilk test, Levene test, one-way ANOVA, Robust-Welch test, Tukey HSD method, and two-way ANOVA. RESULTS: The biocompatibility of the adhesives was found to be high, as confirmed by the lack of significant differences in the cytotoxicity between the sample and control groups. Discs made from composites containing nBG@Ag exhibited a significant reduction in the growth of Streptococcus mutans (p < 0.05), and the antibacterial activity increased with higher percentages of nBG@Ag. The shear bond strength of the adhesives decreased significantly (p < 0.001) after the addition of nanoparticles, but it remained above the recommended value. The addition of nBG@Ag showed improvement in the microhardness of the teeth, although the differences in microhardness between the study groups were not statistically significant. The formation of hydroxyapatite deposits on the tooth surface was confirmed through SEM and energy-dispersive X-ray spectroscopy (EDX). CONCLUSION: Adding nBG@Ag to orthodontic adhesives can be an effective approach to enhance antimicrobial activity and reduce enamel demineralization around the orthodontic brackets, without compromising biocompatibility and bond strength.