Selective permeation up a chemical potential gradient to enable an unusual solvent purification modality.

The need for energy-efficient recovery of organic solutes from aqueous streams is becoming more urgent as chemical manufacturing transitions toward nonconventional and bio-based feedstocks and processes. In addition to this, many aqueous waste streams contain recalcitrant organic contaminants, such as pharmaceuticals, industrial solvents, and personal care products, that must be removed prior to reuse. We observe that rigid carbon membrane materials can remove and concentrate organic contaminants via an unusual liquid-phase membrane permeation modality. Surprisingly, detailed thermodynamic calculations on the chemical potential of the organic contaminant reveal that the organic species has a higher chemical potential on the permeate side of the membrane than on the feed side of the membrane. This unusual observation challenges conventional membrane transport theory that posits that all permeating species move from high chemical potential states to lower chemical potential states. Based on experimental measurements, we hypothesize that the organic is concentrated in the membrane relative to water via favorable binding interactions between the organic and the carbon membrane. The concentrated organic is then swept through the membrane via the bulk flow of water in a modality known as "sorp-vection." We highlight via simplified nonequilibrium thermodynamic models that this "uphill" chemical potential permeation of the organic does not result in second-law violations and can be deduced via measurements of the organic and water sorption and diffusion rates into the carbon membrane. Moreover, this work identifies the need to consider such nonidealities when incorporating unique, rigid materials for the separations of aqueous waste streams.

Mammalian Cell Genotoxicity of Potable Reuse and Conventional Drinking Waters.

Potable reuse water is increasingly part of the water supply portfolio for municipalities facing water shortages, and toxicity assays can be useful for evaluating potable reuse water quality. We examined the Chinese hamster ovary cell acute direct genotoxicity of potable reuse waters contributed by disinfection byproducts (DBPs) and anthropogenic contaminants and used the local conventional drinking waters as benchmarks for evaluating potable reuse water quality. Our results showed that treatment trains based on reverse osmosis (RO) were more effective than RO-free treatment trains for reducing the genotoxicity of influent wastewaters. RO-treated reuse waters were less genotoxic than the local tap water derived from surface water, whereas reuse waters not treated by RO were similarly genotoxic as the local drinking waters when frequent replacement of granular activated carbon limited contaminant breakthrough. The genotoxicity contributed by nonvolatile, uncharacterized DBPs and anthropogenic contaminants accounted for ≥73% of the total genotoxicity. The (semi)volatile DBPs of current research interest contributed 2-27% toward the total genotoxicity, with unregulated DBPs being more important genotoxicity drivers than regulated DBPs. Our results underscore the need to look beyond known, (semi)volatile DBPs and the importance of determining whole water toxicity when assessing the quality of disinfected waters.

Multiple Roles of Anions on the Degradation Efficiency and Mineralization Pathway of Recalcitrant Acetaldehyde by Vacuum Ultraviolet (185 nm) Oxidation.

Vacuum-UV (185 nm, VUV) is widely applied to polish reverse osmosis permeate (ROP), such as the production of electronics-grade ultrapure water. In this study, the VUV oxidation of acetaldehyde, a common carbonyl in ROP, was found to be influenced by anions even at low concentrations. Interestingly, the influencing extent and mechanism varied depending on the anions. Bicarbonate minimally affected the VUV-photon absorption and •OH consumption, but at 5000 µg-C·L-1, it decreased the degradation of acetaldehyde by 58.7% possibly by scavenging organic radicals or other radical chain reactions. Nitrate strongly competed for VUV-photon absorption and •OH scavenging through the formation of nitrite, and at 500 µg-N·L-1, it decreased the removal rate of acetaldehyde degradation by 71.2% and the mineralization rate of dissolved organic carbon by 53.4%. Chloride competed for VUV-photon absorption and also generated reactive chlorine species, which did not affect acetaldehyde degradation but influenced the formation of organic byproducts. The radical chain reactions or activation of anions under VUV irradiation could compensate for the decrease in oxidation performance and need further investigation. In real ROPs, the VUV oxidation of acetaldehyde remained efficient, but mineralization was hindered due to nitrate and chloride anions. This study deepens the understanding of the photochemistry and feasibility of VUV in water with low concentrations of anions.

Energetic Comparison of Flow-Electrode Capacitive Deionization and Membrane Technology: Assessment on Applicability in Desalination Fields.

Flow-electrode capacitive deionization (FCDI) is a promising technology for sustainable water treatment. However, studies on the process have thus far been limited to lab-scale conditions and select fields of application. Such limitation is induced by several shortcomings, one of which is the absence of a comprehensive process model that accurately predicts the operational performance and the energy consumption of FCDI. In this study, a simulation model is newly proposed with initial validation based on experimental data and is then utilized to elucidate the performance and the specific energy consumption (SEC) of FCDI under multiple source water conditions ranging from near-groundwater to high salinity brine. Further, simulated pilot-scale FCDI system was compared with actual brackish water reverse osmosis (BWRO) and seawater reverse osmosis (SWRO) plant data with regard to SEC to determine the feasibility of FCDI as an alternative to the conventional membrane processes. Analysis showed that FCDI is competent for operation against brackish water solutions under all possible operational conditions with respect to the BWRO. Moreover, its distinction can be extended to the SWRO for seawater conditions through optimization of its total effective membrane area via scale-up. Accordingly, future directions for the advancement of FCDI was suggested to ultimately prompt the commercialization of the FCDI process.

Exploring Perfluoroalkyl and Polyfluoroalkyl Substance Presence and Potential Leaching from Reverse Osmosis Membranes: Implications for Drinking Water Treatment.

Reverse osmosis (RO) is increasingly used in drinking water production to effectively remove micropollutants, such as perfluoroalkyl and polyfluoroalkyl substances (PFAS). However, RO membranes themselves may contain PFAS, which can potentially leach into treated drinking water. Leaching experiments and direct total oxidizable precursor assays revealed the presence and leaching potential of PFOS (branched and linear), PFBA, PFHxA, PFNA, and PFOA in five selected commercial RO membranes. This resulted in the release of tens of milligrams of ΣPFAS per membrane element used in drinking water production. Depending on assumptions made regarding leaching kinetics and volume of produced water per membrane element, predicted concentrations of ΣPFAS in the produced water ranged from less than one up to hundreds of pg/L. These concentrations are two to four orders of magnitude lower than those currently observed in Dutch drinking waters. The origin of PFAS in the membranes remains unclear. Further research is needed to bridge the gap between the laboratory conditions as used in this study and the real-world conditions and for a full understanding of potential leaching scenarios. Such an understanding is critical for water producers using RO technologies to proactively manage and mitigate potential PFAS contamination.

The Future of Municipal Wastewater Reuse Concentrate Management: Drivers, Challenges, and Opportunities.

Water reuse is rapidly becoming an integral feature of resilient water systems, where municipal wastewater undergoes advanced treatment, typically involving a sequence of ultrafiltration (UF), reverse osmosis (RO), and an advanced oxidation process (AOP). When RO is used, a concentrated waste stream is produced that is elevated in not only total dissolved solids but also metals, nutrients, and micropollutants that have passed through conventional wastewater treatment. Management of this RO concentrate─dubbed municipal wastewater reuse concentrate (MWRC)─will be critical to address, especially as water reuse practices become more widespread. Building on existing brine management practices, this review explores MWRC management options by identifying infrastructural needs and opportunities for multi-beneficial disposal. To safeguard environmental systems from the potential hazards of MWRC, disposal, monitoring, and regulatory techniques are discussed to promote the safety and affordability of implementing MWRC management. Furthermore, opportunities for resource recovery and valorization are differentiated, while economic techniques to revamp cost-benefit analysis for MWRC management are examined. The goal of this critical review is to create a common foundation for researchers, practitioners, and regulators by providing an interdisciplinary set of tools and frameworks to address the impending challenges and emerging opportunities of MWRC management.

Mitigation of reverse osmosis membrane fouling by coagulation pretreatment to remove silica and transparent exopolymer particles.

The dissolution of silica and transparent exopolymer particles (TEP) can deposit on the membrane surface and cause serious membrane fouling in reverse osmosis (RO) technology. Coagulation, as a common pretreatment process for RO, can effectively intercept pollutants and alleviate membrane fouling. In this study, FeCl3 and AlCl3 coagulants and polyacrylamide (PAM) flocculants were used to explore the optimal coagulation conditions to reduce the concentration of silica and TEP in the RO process. The results showed that the two coagulants had the best removal effect on pollutants when the pH was 7 and the dosage was 50 mg/L. Considering the proportion of reversible fouling after coagulation, the removal rate of pollutants, and the residual amount of coagulation metal ions, the best PAM dosage was 5 mg/L for FeCl3 and 1 mg/L for AlCl3. After coagulation pretreatment, the Zeta potential decreased, and the particle size distribution increased, making pollutants tend to aggregate, thus effectively removing foulants. The removal mechanisms of pollutants by coagulation pretreatment were determined to be adsorption, electric neutralization and co-precipitation. This study determined the best removal conditions of silica and TEP by coagulation and explored the removal mechanism.

Commercial reverse osmosis point-of-use systems in Egypt failed to purify tap water.

This study addresses the heightened global reliance on point-of-use (PoU) systems driven by water quality concerns, ageing infrastructure, and urbanization. While widely used in Egypt, there is a lack of comprehensive evaluation of these systems. We assessed 10 reverse osmosis point-of-use systems, examining physicochemical, bacteriological, and protozoological aspects of tap water (inlets) and filtered water (outlets), adhering to standard methods for the examination of water and wastewater. Results showed significant reductions in total dissolved solids across most systems, with a decrease from 210 ± 23.6 mg/L in tap water to 21 ± 2.8 mg/L in filtered water for PoU-10. Ammonia nitrogen levels in tap water decreased from 0.05 ± 0.04 to 2.28 ± 1.47 mg/L to 0.02 ± 0.04 to 0.69 ± 0.64 mg/L in filtered water. Despite this, bacterial indicators showed no significant changes, with some systems even increasing coliform levels. Protozoological analysis identified prevalent Acanthamoeba (42.5%), less frequent Naegleria (2.5%), Vermamoeba vermiformis (5%), and potentially pathogenic Acanthamoeba genotypes. Elevated bacterial indicators in filtered water of point-of-use systems, combined with essential mineral removal, indicate non-compliance with water quality standards, posing a public health concern. Further research on the long-term health implications of these filtration systems is essential.

High-impact innovations for high-salinity membrane desalination.

Reducing the cost of high-salinity (>75 g/L total dissolved solids) brine concentration technology would unlock the potential for vast inland water supplies and promote the safe management of concentrated aqueous waste streams. Impactful innovation will target component performance improvements and cost reductions that yield the highest impact on system costs, but the desalination community lacks methods for quantitatively evaluating the value of innovation or the robustness of technology platforms relative to competing technologies. This work proposes a suite of methods built on process-based cost optimization models that explicitly address the complexities of membrane-separation processes, namely that these processes comprise dozens of nonlinearly interacting components and that innovation can occur in more than one component at a time. We begin by demonstrating the merit of performing simple parametric sensitivity analysis on component performance and cost to guide the selection of materials and manufacturing methods that reduce system costs. A more rigorous implementation of this approach relates improvements in component performance to increases in component costs, helping to further discern high-impact innovation trajectories. The most advanced implementation includes a stochastic simulation of the value of innovation that accounts for both the expected impact of a component innovation on reducing system costs and the potential for improvements in other components. Finally, we apply these methods to identify innovations with the highest probability of substantially reducing the levelized cost of water from emerging membrane processes for high-salinity brine treatment.

Integrated Membrane Process in Organic Media: Combining Organic Solvent Ultrafiltration, Nanofiltration, and Reverse Osmosis to Purify and Concentrate the Phenolic Compounds from Wet Olive Pomace.

Phenolic compounds from a hydroalcoholic extract of wet olive pomace were purified and concentrated by an integrated membrane process in organic media. First, UF010104 (Solsep BV) and UP005 (Microdyn Nadir) membranes were tested to be implemented in the ultrafiltration stage, with the aim of purifying the extract and obtaining a permeate enriched in phenolic compounds. Despite the high flux observed with the UF010104 membrane (20.4 ± 0.7 L·h-1·m-2, at 2 bar), the UP005 membrane was selected because of a more suitable selectivity. Even though some secoiridoids were rejected, the permeate stream obtained with this membrane contained high concentrations of valuable simple phenols and phenolic acids, whereas sugars and macromolecules were retained. Then, the ultrafiltration permeate was subjected to a nanofiltration step employing an NF270 membrane (DuPont) for a further purification and fractionation of the phenolic compounds. The permeate flux was 50.2 ± 0.2 L·h-1·m-2, working at 15 bar. Hydroxytyrosol and some phenolic acids (such as vanillic acid, caffeic acid, and ferulic acid) were recovered in the permeate, which was later concentrated by reverse osmosis employing an NF90 membrane. The permeate flux obtained with this membrane was 15.3 ± 0.3 L·h-1·m-2. The concentrated phenolic mixture that was obtained may have important applications as a powerful antioxidant and for the prevention of diabetes and neurodegenerative diseases.

Microalgae treatment of food processing wastewater for simultaneous biomass resource recycling and water reuse.

Food processing wastewater presents a considerable challenge for treatment owing to its elevated nitrogen and phosphorus levels. Nonetheless, it possesses inherent value attributed to its abundant nutrients and organic content. This study presents an innovative approach for treating food processing wastewater and reusing biomass. Initially, the secondary-treated wastewater undergoes flocculation and sedimentation, followed by reverse osmosis to ensure that the effluent meets reuse standards. Subsequently, reverse osmosis concentrates, generated at varying water recovery rates, are utilized for microalgae cultivation to recover nitrogen and phosphorus. Furthermore, this study highlights the potential of reverse osmosis concentrates in reducing the water demand for microalgae cultivation and in producing commercial-grade nutrients. The findings reveal that reverse osmosis achieves removal rates exceeding 90 % for both nitrogen and phosphorus and effluent meets reuse standards. Following seven days of cultivation, microalgae cultured in reverse osmosis concentrated water with an 80 % water recovery rate demonstrate denitrification and phosphorus removal rates of 73.88 % and 80.92 % respectively, with a biomass concentration of 563 mg/L and a protein yield of 128 mg/L. Moreover, a total volumetric energy yield of 10.08 kJ/L is obtained, facilitating energy valorization. In conclusion, this study offers practical solutions for wastewater treatment and resource recovery, enabling the attainment of zero discharge of pollutants while generating valuable resources through microalgae cultivation.

Effect of Mn2+ on RO membrane organic fouling: Insights into the complexation and interfacial interaction.

RO process is commonly used to treat and reuse manganese-containing industrial wastewater. Nevertheless, even after undergoing multi-stage treatment, the secondary biochemical effluent still exhibits a high concentration of Mn2+ coupled with organics entering the RO system, leading to membrane fouling. In this work, we systematically analyze the RO membrane organic fouling processes and mechanisms, considering the coexistence of Mn2+ with humic acid (HA), sodium alginate (SA), bovine serum albumin (BSA) and their mixtures (HBS). The impact of Mn2+ on membrane fouling was HBS > SA > HA > BSA, controlling polysaccharide pollutant concentrations should be a priority for mitigating membrane fouling. In the presence of Mn2+ with HA, SA, or HBS, membrane fouling is primarily attributed to the complexation of organics and Mn2+ and the facilitation of interfacial interaction energy. RO membrane BSA fouling was not directly affected by Mn2+, the addition of Mn2+ induced a salting-out effect, leading to the deposition of BSA in a single molecular on the membrane. Simultaneously, adhesion energy hinders the deposition of BSA on the membrane, resulting in milder membrane fouling. This study provided the theoretical basis and suggestions for RO membrane organic fouling control in the presence of Mn2+.

Application of membrane separation technology in the purification of pharmaceutical components.

Traditional Chinese medicine (TCM) is often composed of a variety of natural medicines. Its composition is complex, and many of its components can not be analyzed and identified. The first step in the rational application of TCM is to successfully separate the effective components which is also a great inspiration for the development of new drugs. Among the many separation technologies of TCM, the traditional heating concentration separation technology has high energy consumption and low efficiency. As a new separation technology, membrane separation technology has the characteristics of simple operation, high efficiency, environment-friendly and so on. The separation effect of high molecular weight difference solution is better. The applications of several main membrane separation technologies such as microfiltration, nanofiltration, ultrafiltration and reverse osmosis are reviewed, the methods of restoring membrane flux after membrane fouling are discussed, and their large-scale industrial applications in the future are prospected and summarized.

Comparative assessment of treatment technologies for minimizing reverse osmosis concentrate volume for industrial applications: A review.

Desalination of seawater, brackish water, and reclaimed water is becoming increasingly prevalent worldwide to supplement and diversify fresh water supplies. However, particularly for industrial wastewater, the need for environment-friendly and economically viable alternatives for concentrate management is the major impediment to deploying large-scale desalination. This review covers various strategies and technologies for managing reverse osmosis concentrate (ROC) and also includes their disposal, treatment, and potential applications. Developing energy-efficient, economical, and ecologically sound ROC management systems is essential if desalination and wastewater treatment are being implemented for a sustainable water future, particularly for industrial wastewater. The limitations and benefits of various concentrate management strategies are examined in this review. Moreover, it explores the potential of innovative technologies in reducing concentrate volume, enhancing water recovery, eliminating organic pollutants, and extracting valuable resources. This review critically discusses concentrate management approaches and technologies, including disposal, treatment, and reuse, including new technologies for reducing concentrate volume, boosting water recovery, eliminating organic contaminants, recovering valuable commodities, and minimizing energy consumption.

Full-length 16S rRNA gene sequencing reveals the operating mode and chlorination-aggravated SWRO biofouling at a nuclear power plant.

Reverse osmosis (RO) membrane fouling and biological contamination problems faced by seawater desalination systems are microbiologically related. We used full-length 16S rRNA gene sequencing to assess the bacterial community structure and chlorine-resistant bacteria (CRB) associated with biofilm growth in different treatment processes under the winter mode of a chlorinated seawater desalination system in China. At the outset of the winter mode, certain CRB, such as Acinetobacter, Pseudomonas, and Bacillus held sway over the bacterial community structure, playing a pivotal role in biofouling. At the mode's end, Deinococcus and Paracoccus predominated, with Pseudomonas and Roseovarius following suit, while certain CRB genera still maintained their dominance. RO and chlorination are pivotal factors in shaping the bacterial community structure and diversity, and increases in total heterotrophic bacterial counts and community diversity in safety filters may adversely affect the effectiveness of subsequent RO systems. Besides, the bacterial diversity and culturable biomass in the water produced by the RO system remain high, and some conditionally pathogenic CRBs pose a certain microbial risk as a source of drinking water. Targeted removal of these CRBs will be an important area of research for advancing control over membrane clogging and ensuring water quality safety in the future.

Hydroxytyrosol recovery from olive pomace: a simple process using olive mill industrial equipment and membrane technology.

In this work, pilot-scale nanofiltration was used to obtain aqueous solutions rich in hydroxytyrosol and tyrosol from olive oil by-products. A large-scale simple process involving olive mill standard machinery (blender and decanter) was used for the olive pomace pre-treatment with water. The aqueous extract was then directly fed to a nanofiltration unit and concentrated by reverse osmosis. Final concentration factors ranged between 7 and 9 for hydroxytyrosol and between 4 and 7 for tyrosol. The final aqueous solution, obtained as retentate stream of reverse osmosis, was highly concentrated in hydroxytyrosol and tyrosol and their concentrations remained stable over at least 14 months.

PFAS-CTAB Complexation and Its Role on the Removal of PFAS from a Lab-Prepared Water and a Reverse Osmosis Reject Water Using a Plasma Reactor.

Electrical discharge plasma reactors with argon bubbling can effectively treat long-chain perfluoroalkyl acids (PFAAs) in contaminated water, and the addition of a cationic surfactant cetrimonium bromide (CTAB) is known to enhance the removal of short-chain PFAAs. However, the roles of PFAA chain length, functional group, and water matrix properties on PFAA-CTAB complexation are largely unknown. This work investigated the bulk liquid removal of different PFAAs by CTAB in the absence of plasma. Stepwise addition of CTAB was subsequently used to efficiently treat PFAAs in a lab-prepared water and a reverse osmosis (RO) reject water using an enhanced contact plasma reactor. The results show that CTAB inhibited the bulk liquid removal of long-chain PFAAs in the absence of plasma likely due to the formation of hydrophilic CTAB-PFAA mixed micelles and competition for interfacial access between long-chain PFAAs and CTAB. On the contrary, CTAB enhanced the removal of short- and ultrashort-chain PFAAs by forming hydrophobic complexes. After 6 h of treatment in the plasma reactor with CTAB, PFAAs were 86 to >99% removed from the lab-prepared water and 29 to >99% removed from the RO reject water. This study provides important insights for overcoming mass transfer limitations for PFAA treatment technologies.

Desalination, Water Re-use, and Halophyte Cultivation in Salinized Regions: A Highly Productive Groundwater Treatment System.

Groundwater salinization is a problem affecting access to water in many world regions. Though desalination by conventional reverse osmosis (RO) can upgrade groundwater quality for drinking, its disadvantages include unmanaged brine discharge and accelerated groundwater depletion. Here, we propose a new approach combining RO, forward osmosis (FO), and halophyte cultivation, in which FO optimally adjusts the concentration of the RO reject brine for irrigation of Salicornia or Sarcocornia. The FO also re-uses wastewater, thus, reducing groundwater extraction and the wastewater effluent volume. To suit different groundwater salinities in the range 1-8 g/L, three practical designs are proposed and analyzed. Results include specific groundwater consumption (SGC), specific energy consumption (SEC), wastewater volume reduction, peak RO pressure, permeate water quality, efficiency of water resource utilization, and halophyte yield. Compared to conventional brackish water RO, the results show superior performance in almost all aspects. For example, SGC is reduced from 1.25 to 0.9 m3 per m3 of drinking water output and SEC is reduced from 0.79 to 0.70 kW h/m3 by a FO-RO-FO system treating groundwater of salinity 8 g/L. This system can produce 1.1 m3 of high-quality drinking water and up to 4.9 kg of edible halophyte per m3 of groundwater withdrawn.

Exploring the Knowledge Attained by Machine Learning on Ion Transport across Polyamide Membranes Using Explainable Artificial Intelligence.

Recent studies have increasingly applied machine learning (ML) to aid in performance and material design associated with membrane separation. However, whether the knowledge attained by ML with a limited number of available data is enough to capture and validate the fundamental principles of membrane science remains elusive. Herein, we applied explainable artificial intelligence (XAI) to thoroughly investigate the knowledge learned by ML on the mechanisms of ion transport across polyamide reverse osmosis (RO) and nanofiltration (NF) membranes by leveraging 1,585 data from 26 membrane types. The Shapley additive explanation method based on cooperative game theory was used to unveil the influences of various ion and membrane properties on the model predictions. XAI shows that the ML can capture the important roles of size exclusion and electrostatic interaction in regulating membrane separation properly. XAI also identifies that the mechanisms governing ion transport possess different relative importance to cation and anion rejections during RO and NF filtration. Overall, we provide a framework to evaluate the knowledge underlying the ML model prediction and demonstrate that ML is able to learn fundamental mechanisms of ion transport across polyamide membranes, highlighting the importance of elucidating model interpretability for more reliable and explainable ML applications to membrane selection and design.

Demystifying the Role of Surfactant in Tailoring Polyamide Morphology for Enhanced Reverse Osmosis Performance: Mechanistic Insights and Environmental Implications.

Surfactant-assisted interfacial polymerization (IP) has shown strong potential to improve the separation performance of thin film composite polyamide membranes. A common belief is that the enhanced performance is attributed to accelerated amine diffusion induced by the surfactant, which can promote the IP reaction. However, we show enhanced membrane performance for Tween 80 (a common surfactant), even though it decreased the amine diffusion. Indeed, the membrane performance is closely related to its polyamide roughness features with numerous nanovoids. Inspired by the nanofoaming theory that relates the roughness features to nanobubbles degassed during the IP reaction, we hypothesize that the surfactant can stabilize the generated nanobubbles to tailor the formation of nanovoids. Accordingly, we obtained enlarged nanovoids when the surfactant was added below its critical micelle concentration (CMC). In addition, both the membrane permeance and selectivity were enhanced, thanks to the enlarged nanovoids and reduced defects in the polyamide layer. Increasing the concentration above CMC resulted in shrunken nanovoids and deteriorated performance, which can be ascribed to the decreased stabilization effect caused by micelle formation. Interestingly, better antifouling performance was also observed for the surfactant-assisted membranes. Our current study provides mechanistic insights into the critical role of surfactant during the IP reaction, which may have important implications for more efficient membrane-based desalination and water reuse.