Three-Dimensional Visualization of Breast Cancer Pathology Evolution in Clinical Patient Tissues with NIR-II Imaging.

Breast cancer (BC) is the most common tumor worldwide and requires crucial molecular typing for treatment and prognosis assessment. Currently, approaches like pathological staining, immunohistochemistry (IHC), and immunofluorescence (IF) face limitations due to the low signal-to-background ratio (SBR) and high tumor heterogeneity, resulting in a high misdiagnosis rate. Fluorescent assay in the second near-infrared region (NIR-II, 1000-1700 nm) exhibits ultrahigh SBR owing to diminished scattering and tissue autofluorescence. Here, we present a NIR-II strategy for accurate BC molecular typing and three-dimensional (3D) visualization based on the atomically precise fluorescent Au24Pr1 clusters. Single-atom Pr doping results in 3.9-fold fluorescence enhancement and long-term photostability. The Au24Pr1 clusters possess high fluorescence centered at ∼1100 nm and the SBR on pathological section diagnosis was 4 times higher than that of NIR-I imaging. This enables high spatial resolution 3D visualization of biopsy specimens, which can surmount tissue heterogeneity for clinical diagnosis of BC.

Comparing a virtual reality head-mounted display to on-screen three-dimensional visualization and two-dimensional computed tomography data for training in decision making in hepatic surgery: a randomized controlled study.

OBJECTIVE: Evaluation of the benefits of a virtual reality (VR) environment with a head-mounted display (HMD) for decision-making in liver surgery. BACKGROUND: Training in liver surgery involves appraising radiologic images and considering the patient's clinical information. Accurate assessment of 2D-tomography images is complex and requires considerable experience, and often the images are divorced from the clinical information. We present a comprehensive and interactive tool for visualizing operation planning data in a VR environment using a head-mounted-display and compare it to 3D visualization and 2D-tomography. METHODS: Ninety medical students were randomized into three groups (1:1:1 ratio). All participants analyzed three liver surgery patient cases with increasing difficulty. The cases were analyzed using 2D-tomography data (group "2D"), a 3D visualization on a 2D display (group "3D") or within a VR environment (group "VR"). The VR environment was displayed using the "Oculus Rift ™" HMD technology. Participants answered 11 questions on anatomy, tumor involvement and surgical decision-making and 18 evaluative questions (Likert scale). RESULTS: Sum of correct answers were significantly higher in the 3D (7.1 ± 1.4, p < 0.001) and VR (7.1 ± 1.4, p < 0.001) groups than the 2D group (5.4 ± 1.4) while there was no difference between 3D and VR (p = 0.987). Times to answer in the 3D (6:44 ± 02:22 min, p < 0.001) and VR (6:24 ± 02:43 min, p < 0.001) groups were significantly faster than the 2D group (09:13 ± 03:10 min) while there was no difference between 3D and VR (p = 0.419). The VR environment was evaluated as most useful for identification of anatomic anomalies, risk and target structures and for the transfer of anatomical and pathological information to the intraoperative situation in the questionnaire. CONCLUSIONS: A VR environment with 3D visualization using a HMD is useful as a surgical training tool to accurately and quickly determine liver anatomy and tumor involvement in surgery.

Efficacy of hepatectomy for hepatolithiasis using 3D visualization combined with ICG fluorescence imaging: A retrospective cohort study.

BACKGROUND: Hepatolithiasis is a complex condition that poses challenges and difficulties in surgical treatment. Three-dimensional visualization technology combined with fluorescence imaging (3DVT-FI) enables accurate preoperative assessment and real-time intraoperative navigation. However, the perioperative outcomes of 3DVT-FI in hepatolithiasis have not been reported. We aim to evaluate the efficacy of 3DVT-FI in the treatment of hepatolithiasis. METHODS: A retrospective analysis was performed on 128 patients who underwent hepatectomy for hepatolithiasis at the Department of Hepatobiliary Surgery, Zhujiang Hospital, between January 2017 and December 2022. Among them, 50 patients underwent hepatectomy using 3DVT-FI (3DVT-FI group), while 78 patients underwent conventional hepatectomy without 3DVT-FI (CH group). The operative data, postoperative liver function indices, complication rates and stone residue were compared between the two groups. RESULTS: There were no significant differences in preoperative baseline data between the two groups (p > 0.05). Compared with the CH group, the 3DVT-FI group exhibited lower intraoperative blood loss (140.00 ± 112.12 vs. 225.99 ± 186.50 mL, p = 0.001), and a lower intraoperative transfusion rate (8.0% vs. 23.1%, p = 0.027). The overall incidence of postoperative complications did not differ significantly (22.0% vs. 35.9%, p = 0.096). The 3DVT-FI group was associated with a lower immediate residual stone rate (16.0% vs. 34.6%, p = 0.021). There were no perioperative deaths in the 3DVT-FI group, while one perioperative death occurred in the CH group. CONCLUSIONS: The 3DVT-FI may offer significant benefits in terms of surgical safety, reduced intraoperative bleeding and decreased stone residue during hepatectomy for hepatolithiasis.

Application of three-dimensional visualization technology in early surgical repair of bile duct injury during laparoscopic cholecystectomy.

OBJECTIVE: This study aimed to explore the application value of three-dimensional (3D) visualization technology in the early surgical repair of bile duct injury during laparoscopic cholecystectomy (LC). METHODS: A retrospective analysis was conducted on the clinical data of 15 patients who underwent early surgical repair of bile duct injury during LC with the assistance of 3D visualization technology at the Hepatobiliary Surgery Department of Ningxia Hui Autonomous Region People's Hospital from January 2019 to December 2022. Postoperative efficacy and long-term follow-up outcomes were summarized. RESULTS: Before the repair surgery, 15 cases of bile duct injury during LC were evaluated using 3D visualization technology according to the Strasberg-Bismuth classification: 2 cases of type C, 4 of type E1, 3 of type E2, 3 of type E3, and 3 of type E4. Intraoperative findings were consistent with the 3D visualization reconstruction results, and all patients successfully underwent hepaticojejunostomy using Roux-en-Y anastomosis guided by the 3D visualization navigation. The time interval between LC and bile duct repair surgery ranged from 5 to 28 (14.2 ± 9.7) days. The surgical time was between 120 and 190 (156.40 ± 23.92) min, and estimated blood loss ranged from 80 to 250 (119.66 ± 47.60) mL. The length of hospital stay ranged from 12 to 25 days (median: 16 days). One patient experienced mild bile leakage after the operation, which healed with conservative treatment. All patients were followed up for 12-56 months (median: 34 months) without any loss to follow-up. During the follow-up period, no complications, such as anastomotic stricture or stone formation, were observed. CONCLUSION: The application of 3D visualization technology for preoperative evaluation and intraoperative navigation can accurately and effectively facilitate early surgical repair of bile duct injury during LC and has clinical value for promotion and application.

Three-Dimensional Computed Tomography Scanning Study of the Superior Labial Artery in Chinese Individuals for Assessing Filler Injection Safety.

BACKGROUND: Lip filler injection is one of the most common minimally invasive cosmetic procedures involving the face; however, vascular complications are not uncommon. The aim of this study was to investigate the anatomy of the superior labial artery (SLA) and provide precise topographic information for dermal filler injection into the lips. METHODS: Computed tomography (CT) scans of 52 cadaveric heads injected with lead oxide were obtained. We then used Mimics software to construct 3D images of the SLA described by a coordinate system based on the bilateral external auditory canal and the left orbit. This study aimed to classify the SLA in the Han Chinese population, measure its diameter at specific points, and determine the thickness of the lip at those points. Ultimately, we utilized a thermal imaging technique to illustrate the course and depth of the SLA within the lip. The objective of this study was to provide safe guidance for clinical injections. RESULTS: In this study, the SLA was successfully identified in all cadavers. The mean overall diameter of the superior labial arteries was 1.36 ± 0.28 mm. The superior labial artery showed a general course from deep to shallow with an average depth of 5.68 ± 1.68 mm from the oral commissure to the midline. CONCLUSIONS: There are anatomical differences in the superior labial arteries among Chinese people. Furthermore, 3D CT images can digitally elucidate the exact positions of the superior labial artery via a coordinate system, improving the safety of upper lip filler injections in clinical settings. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

3D liver model-based surgical education improves preoperative decision-making and patient satisfaction-a randomized pilot trial.

OBJECTIVE: Hepatobiliary surgery bares obstacles to informed consent for the patients due to its complexity and related risk of postoperative complications. 3D visualization of the liver has been proven to facilitate comprehension of the spatial relationship between anatomical structures and to assist in clinical decision-making. Our objective is to utilize individual 3D-printed liver models to enhance patient satisfaction with surgical education in hepatobiliary surgery. DESIGN, SETTING: We conducted a prospective, randomized pilot study comparing 3D liver model-enhanced (3D-LiMo) surgical education against regular patient education during preoperative consultation at the department of Visceral, Thoracic and Vascular Surgery, University Hospital Carl Gustav Carus, Dresden, Germany. PARTICIPANTS: Of 97 screened patients, undergoing hepatobiliary surgery, 40 patients were enrolled from July 2020 to January 2022. RESULTS: The study population (n = 40) was predominantly of male gender (62.5%) with a median age of 65.2 years and a high prevalence of preexisting diseases. Underlying disease, warranting hepatobiliary surgery, was malignancy in the majority of cases (97.5%). Patients in the 3D-LiMo group were more likely to feel very thoroughly educated and exhibited a higher level of satisfaction following surgical education than the control group (80 vs. 55%, n.s.; 90 vs. 65%, n.s.; respectively). Applying 3D models was also associated with enhanced understanding of the underlying disease with regard to amount (100% vs. 70%, p = 0.020) and location of liver masses (95 vs. 65%, p = 0.044). 3D-LiMo patients also demonstrated enhanced understanding of the surgical procedure (80 vs. 55%, n.s.), leading to better awareness for the occurrence of postoperative complications (88.9, vs. 68.4%, p = 0.052). Adverse event profiles were similar. CONCLUSION: In conclusion, individual 3D-printed liver models increase patient satisfaction with surgical education and facilitate patients' understanding of the surgical procedure as well as awareness of postoperative complications. Therefore, the study protocol is feasible to apply to an adequately powered, multicenter, randomized clinical trial with minor modifications.

Research on the Visualization of Railway Signal Operation and Maintenance Based on BIM + GIS.

To adapt to the "fine" and "extensive" management characteristics of railway signal equipment operation and maintenance, achieving real-time and interactive monitoring of signal equipment operation status, and developing an integrated approach to equipment operation and maintenance, this paper takes a comprehensive management perspective. To create a lightweight BIM model, the Garland folding algorithm is utilized to simplify the IFC file format. Building on this approach, the data are divided based on building component division standards to obtain separate files containing geometric information and semantic attributes. The geometric information files are converted to a 3D Tiles format, combining BIM semantic attributes with semantic attribute files through an intermediate format. Dynamic data management is achieved by setting the octree space index structure in combination with a view-frustum culling algorithm. Then, the 3D Tiles target file is imported into the Cesium platform, and Node.js is used to achieve three-dimensional visualization of railway signal operation and maintenance. The proposed method is verified using an inbound signal as an example to assess its feasibility. The results demonstrate the potential of the proposed method to achieve stable integration between BIM equipment full lifecycle maintenance and GIS geographical space display. Railway signal equipment is endowed with comprehensive one-click information query functions for equipment positioning and spatial analysis, improving the efficiency and scientific decision-making level of equipment operation and maintenance.

Distance versus face-to-face education of gross anatomy for dental hygiene students: Perceptions and academic achievements of learners.

The provision of distance education has increased rapidly over the past few years owing to the COVID-19 pandemic. The core of gross anatomy distance education is three-dimensional (3D) visualization of anatomical structures, and the use of simple 3D visualization tools has increased as distance education has become more popular. The purpose of this study was to establish a more effective operation plan in dental hygiene by investigating learners' opinions about distance education of gross anatomy and 3D visualization tools, and by comparing and analyzing their academic achievements. The study involved 250 students and comprised an analysis of 120 students who took a head and neck anatomy class at the Department of Dental Hygiene at D University via distance learning during 2020-2022, and 130 graduates who had completed the class via face-to-face learning during 2015-2017. An online survey of 120 of the enrolled students comprised 10 questions asking for opinions on the head and neck anatomy distance learning classes, five questions on the 3D visualization tool, and five on general characteristics. Overall, the learners had positive perceptions of distance education for head and neck anatomy and the 3D visualization tool. Among the education methods compared, they generally preferred blended learning (n = 47, 39.2%). There was a significant preference for the distance learning method of asynchronous classes (n = 86, 94.5%). Analysis of academic achievements according to whether or not distance education was conducted revealed a significantly higher score in the face-to-face class group (P < 0.05). A blended learning method can be effective in increasing learner satisfaction and improving academic achievement in gross anatomy classes on dental hygiene. It is suggested that theoretical material should be learned through asynchronous content and knowledge expanded through small-group activities during face-to-face learning. This will help establish a standard model for teaching of gross anatomy in dental hygiene in the postpandemic era.

Mitochondria to Bitter Melon: Understanding the 3D Ultrastructure of the Cell Via 2D Thin Section Reconstruction and the History of Mitochondrial Visualization.

The origin of histology-the study of microscopic anatomy-is intimately connected with the development of the light microscope and improvements in lens design and manufacture.However, knowledge of the ultrastructure of the cell was hampered by the very nature of light microscopy, which, due to the physical properties of the visible electromagnetic spectrum, could never provide the magnification and resolution for study of the granules seen in cells, which we now know as the organelles. When the electron microscope was developed in the 1930s, a beam of electrons replaced light as the source of illumination, and the inner details of the cell could be observed directly. With thin sections obtained by transmission electron microscopy, cell biologists could embark on the task of reconstructing 3D microstructure via the painstaking stacking of the individual slices.The three-dimensional visualization of the mitochondrion was particularly challenging, as its convoluted structure could be interpreted in several ways based on differences observed by George Palade at the Rockefeller Institute for Medical Research (NYC), and Fritiof Sjöstrand at the Karolinska Institutet (Stockholm). Palade's interpretation was eventually accepted as correct due to its alignment with the findings of biochemists investigating the cascade of molecular interactions known as the Krebs cycle, responsible for the production of cellular energy in the form of adenosine triphosphate (ATP). However, it can also be argued that Palade's visualization via a physical model of the mitochondrion, which he built with sheets of wax, photographed, and published in 1953, better enabled colleagues to comprehend its unique inner structures known as cristae.To teach undergraduate science students about this pivotal moment in cell biology and add to their understanding of the reconstruction process, a pedagogical exercise was created in which students are provided with outline drawings of various organic objects cut in random planes of section. Working individually at first, and then in groups, they are tasked with collaborating to devise an accurate description of the shape and texture of the object. After their observations are presented to the class, they are shown a photo of the object prior to its sectioning to determine if their observations were correct.

Evaluation of aortic calcification using a three-dimensional volume-rendering method in patients with end-stage kidney disease.

INTRODUCTION: Very few studies have been performed to evaluate both the severity and site of aortic calcification (AC) in both end-stage kidney disease (ESKD) and diabetes mellitus (DM). The purpose of our study was to examine the utility of a newly developed three-dimensional (3D) visualization and quantification method compared with other methods to evaluate vascular calcification in ESKD patients with and without DM. MATERIALS AND METHODS: Fifty patients with ESKD before initiating hemodialysis at our hospital were included in the present study. They were divided into the two groups, depending on the presence or absence of DM: Control group (n = 31) and DM group (n = 19). The volume and site of AC were evaluated via computed tomography (CT) scan using a 3D visualization and quantification method. RESULTS: Total calcification volume was significantly greater in the DM group than in the Control group. Calcification volume in the descending and abdominal aortas was greater in the DM group compared to the Control group. There were no significant differences in calcification volume in the aortic root, ascending aorta, and aortic arch. Calcification volume of the whole aorta, the descending aorta, and the abdominal aorta were each significantly correlated with age, diastolic blood pressure and pulse pressure. CONCLUSION: This study using a 3D visualization and quantification method demonstrated that AC was more severe and occurred more frequently in the abdominal aorta in ESKD patients with DM compared to those without DM. This method would enable us to precisely evaluate the volume and distribution of AC.

Laparoscopic anterior hepatic transection for resecting lesions originating in the paracaval portion of the caudate lobe (with videos).

BACKGROUND: The paracaval portion of the caudate lobe is located in the core of the liver. Lesions originating in the paracaval portion often cling to or even invade major hepatic vascular structures. The traditional open anterior hepatic transection approach has been adopted to treat paracaval-originating lesions. With the development of laparoscopic surgery, paracaval-originating lesions are no longer an absolute contraindication for laparoscopic liver resection. This study aimed to evaluate the safety and feasibility of laparoscopic anterior hepatic transection for resecting paracaval-originating lesions. METHODS: This study included 15 patients who underwent laparoscopic anterior hepatic transection for paracaval-originating lesion resection between August 2017 and April 2020. The perioperative indicators, follow-up results, operative techniques and surgical indications were retrospectively evaluated. RESULTS: All patients underwent laparoscopic anterior hepatic transection for paracaval-originating lesion resection. The median operation time was 305 min (220-740 min), the median intraoperative blood loss was 400 ml (250-3600 ml), and the median length of postoperative hospital stay was 9 days (5-20 days). No conversion to laparotomy or perioperative deaths occurred. Six patients had Clavien grade III-IV complications (III/IV, 5/1). Two patients developed tumor recurrence after 13 months and 8 months. CONCLUSION: Although technically challenging, laparoscopic anterior hepatic transection is still a safe and feasible procedure for resecting paracaval-originating lesions in select patients.

Three-dimensional high-definition exoscope (Kestrel View II) in anterior cervical discectomy and fusion: a valid alternative to operative microscope-assisted surgery.

BACKGROUND: Operative microscope (OM) has greatly advanced modern spine surgery, but remains limited by several drawbacks. Therefore, a three-dimensional (3D) high-definition (HD) exoscope (EX) (Kestrel View II, Mataka Kohli, Japan) system has been developed and used as an alternative to the OM. The aim of this study was to assess and compare the perioperative data and clinical outcomes of anterior cervical discectomy and fusion (ACDF) procedure with either an EX or OM. METHODS: Forty-eight patients with cervical spondylotic myelopathy (CSM) underwent ACDF assisted by the EX or OM between January 2019 and December 2019. We collected and compared data on operative time, intraoperative bleeding, postoperative hospitalization stay, complications, and clinical outcomes between the two groups. The clinical outcomes were evaluated by using visual analogue scale (VAS) scores, Japanese Orthopedic Association (JOA) scores, the recovery rate of JOA scores, and Odom criteria. RESULTS: The operative time in the EX group was significantly shorter than that in the OM group (P < 0.05). The VAS and JOA scores were significantly improved in both groups after surgery (P < 0.05). In addition, the VAS scores in the EX group were significantly lower than those in the OM group at 1 week postoperatively (P < 0.05). The good-to-excellent outcome rates were 90.48 and 88.89% in the EX group and OM group, respectively, whereas the complication occurrence rates of the EX group and OM group were 4.76 and 11.11%, respectively. CONCLUSIONS: EX-assisted and OM-assisted ACDF resulted in similar clinical outcomes for CSM, while EX-assisted surgery may be related to a short operative time and fewer complications.

Three-dimensional visualization of blood supply of the upper lip using micro-CT and implications for plastic surgery.

INTRODUCTION: The anatomy of the arterial branches in the upper lip and their relationships to soft tissue are not well described in the literature. The purpose of this study was to explore a method for visualizing the microvessels and soft tissue three-dimensionally to gain better understanding of the upper lip blood supply. MATERIALS AND METHODS: Seventeen stillborn fetuses were injected with lead oxide-gelatin and stained with iodine. Thirty-four half upper lip specimens were obtained and scanned by micro-computed tomography. The images were then examined and Inveon analysis software was used for three-dimensional reconstructions. RESULTS: The main supplies to the upper lip were from the superior labial and inferior alar arteries. In some cases, the infraorbital and lateral nasal arteries also branched off to the upper lip. The anatomical variations were classified into six types on the basis of the observed vascular composition patterns. The skin was supplied by the subcutaneous vascular network, formed by the superficial ascending branches of the superior labial and inferior alar arteries. The mucosa was supplied by the submucosal vascular network, formed by the deep ascending branches of the superior labial artery and the labial branches of the infraorbital artery. The muscles were supplied by small vertical branches from the subcutaneous and submucosal vascular networks. CONCLUSION: This study provides new anatomical insight into the upper lip by describing the microvessels and the relationship between the arteries and the soft tissue involved. This is important information for clinical applications in upper lip plastic surgery.

Unilateral absence of pulmonary artery associated with lung cancer: analysis of operation strategy based on digital preoperative planning and surgical simulation with three-dimensional visualization.

Unilateral absence of a pulmonary artery (UAPA) is a rare congenital anomaly. The occurrence of lung cancer in association with UAPA is even rarer, and clinical experience is very limited. This report aims to describe a case of unilateral absence of the right pulmonary artery that was associated with primary carcinoma of the contralateral lung. Both ipsilateral and contralateral lung cancer operations in patients with UAPA are extremely rare, with limited clinical experience. This article provides insights into the operative tolerability and outcomes after lung surgery in patients with UAPA, with an analysis of the operation strategy based on digital preoperative planning and surgical simulation with three-dimensional (3D) visualization, which may enable lung cancer surgery to be performed safely.

Comparing Heads-Up versus Binocular Microscope Visualization Systems in Anterior and Posterior Segment Surgeries: A Retrospective Study.

BACKGROUND: Three-dimensional (3D) visualization systems, also known as heads-up systems, are now available for eye surgery and as with every new device there is need for a specific evaluation. OBJECTIVES: The aim of this study was to compare the efficiency, surgical comfort, and safety of a 3D visualization system to a standard binocular microscope (BM) in routine ophthalmologic procedures. METHOD: After a 4-week training period, a 3D visualization system (Ngenuity, Alcon®) available in one of the Robert Debré Hospital Ophthalmology Departments' operating rooms was compared to a standard BM (OPMI LUMIRA 700, Zeiss®), in the process of a call for new device evaluation. From December 2017 to March 2018, 5 surgeons and their respective residents were asked to fill in a questionnaire for all procedures. Before the surgery, the surgeon recorded: (i) the type of surgery (cataract [PK], retinal detachment [RD], epiretinal membrane peeling [ERM], macular hole, vitreous haemorrhage [VH]), (ii) the type of visualization system chosen (3D or BM), and (iii) the estimated surgical risk (low, intermediate, or high grade). At the end of the procedure, the primary surgeon recorded the remaining parameters, including: (i) surgery duration, (ii) intraoperative complications, (iii) percentage of endoillumination for posterior segment surgeries, (iv) status of the operator (senior or resident) and operator switch if necessary (senior only, resident only, or resident with help of the senior), and rated: (i) the visual comfort (low, normal, excellent), (ii) the operative fluency (low, normal, excellent), (iii) backaches (none, low, moderate, important), and (iv) headaches (range from 0 to 10). Age and sex were collected retrospectively. The procedures performed with 3D and BM were subsequently compared using univariate (χ2, Fisher, Wilcoxon) and multivariate analysis (generalized linear model), allowing us to identify parameters independently associated with PK surgery duration. RESULTS: A total of 102 valid questionnaires, relative to 73 PK and 29 vitreoretinal procedures, respectively, were analysed. As regards PK (3D, n = 25 vs. BM, n = 48), the mean age, sex ratio, surgical risk, intraoperative complications (1/25 vs. 4/48), visual comfort, backaches, and headaches were similar between the two systems. The use of 3D allowed faster PK surgeries (16.44 ± 4.36 vs. 21.44 ± 7.50 min; p = 0.007) and slightly enhanced the operative fluency. In vitreoretinal surgeries (3D, n = 14 vs. BM, n = 15), no obvious differences between the two visualization systems were observed, although the use of the 3D system was found to slightly decrease the operative fluency. Parameters independently associated with PK surgery duration were 3D visualization (ß = -4.4 ± 1.4; p = 0.002), high preoperative surgical risk (ß = 6.2 ± 2.4; p = 0.012), intraoperative complications (ß = 8.7 ± 2.6; p = 0.001), and surgeon status (ß = -4.4 ± 1.3; p = 0.001) in univariate and multivariate analysis. CONCLUSIONS: 3D visualization can be safely used in routine practice. It slightly improves the operative fluency, allowing faster PK surgery.

Three-dimensional visualization and measurement of myopectineal orifice in non-inguinal hernia patients.

PURPOSE: The myopectineal orifice (MPO) is a weak area at lower part of the anterior abdominal wall that directly determines the mesh size required in inguinal hernia repair. However, MPO data have mainly been acquired from measurements of cadavers or anesthetized patients. Furthermore, there are very few reports on the measurement of the MPO in Chinese patients. The present study aimed to use three-dimensional visualization technology to measure the MPO in live non-anesthetized Chinese patients, and to use this information to indicate the appropriate mesh size required for inguinal hernia repair. METHODS: In this study, we used the parameters of the MPO and the pelvis that were measured in 40 patients with peripheral arterial disease of the lower limb arteries (80 inguinal regions) using Medraw software (Image Medraw Technology Co., Ltd., China). RESULTS: The result showed that the average width and height of the MPO were 5.71 ± 0.99 cm and 4.96 ± 0.69 cm, respectively (5.22 ± 0.77 cm and 5.13 ± 0.63 cm in males, and 6.20 ± 0.95 cm and 4.80 ± 0.71 cm in females). The average projected area of the MPO was 16.06 ± 4.37 cm2 on the left, and 15.61 ± 4.10 cm2 on the right (P > 0.05). CONCLUSION: Three-dimensional visualization was used to measure the area, width, and height of the MPO in living non-anesthetized Chinese patients. MPO area was correlated with age, but not with pelvic parameters.

The myodural bridge complex defined as a new functional structure.

PURPOSE: The connective tissue between suboccipital muscles and the cervical spinal dura mater (SDM) is known as the myodural bridge (MDB). However, the adjacent relationship of the different connective tissue fibers that form the MDB remains unclear. This information will be highly useful in exploring the function of the MDB. METHODS: The adjacent relationship of different connective tissue fibers of MDB was demonstrated based upon three-dimensional visualization model, P45 plastinated slices and histological sections of human MDB. RESULTS: We found that the MDB originating from the rectus capitis posterior minor muscle (RCPmi), rectus capitis posterior major muscle (RCPma) and obliquus capitis inferior muscle (OCI) in the suboccipital region coexists. Part of the MDB fibers originate from the ventral aspect of the RCPmi and, together with that from the cranial segment of the RCPma, pass through the posterior atlanto-occipital interspace (PAOiS) and enter into the posterior aspect of the upper cervical SDM. Also, part of the MDB fibers originate from the dorsal aspect of the RCPmi, the ventral aspect of the caudal segment of the RCPma, and the ventral aspect of the medial segment of the OCI, enter the central part of the posterior atlanto-axial interspace (PAAiS) and fuse with the vertebral dura ligament (VDL), which connects with the cervical SDM. CONCLUSIONS: Our findings prove that the MDB exists as a complex structure which we termed the 'myodural bridge complex' (MDBC). In the process of head movement, tensile forces could be transferred possibly and effectively by means of the MDBC. The concept of MDBC will be beneficial in the overall exploration of the function of the MDB.

[Efficacy of three-dimensional visualization technology in the precision diagnosis and treatment for primary liver cancer: a retrospective multicenter study of 1 665 cases in China].

Objective: To evaluate the efficacy of three-dimensional(3D) visualization technology in the precision diagnosis and treatment for primary liver cancer. Methods: A total of 1 665 patients with primary liver cancer who admitted to seven medical centers in China between January 2009 to January 2019, diagnosed and treated by 3D visualization protocol were analyzed, and their clinical data were retrospectively reviewed. There were 1 255 males(75.4%) and 410 females(24.6%), with age of (52.9±11.9) years (range: 18 to 86 years). The acquisition of high-quality CT images with submillimeter spatial resolution were conducted using a quality control system. By means of homogenization methods, 3D reconstruction and 3D visualization analysis were performed. Postoperative observation: pathology reports, microvascular invasion, perioperative complications and follow-up. SPSS 25.0 statistical software was used for statistical description and analysis of clinical data. Kaplan-Meier curve was used to calculate overall survival and disease-free survival rate. Results: (1)In the sample of 1 265 patients, 3D reconstructed models clearly displayed as follows. tumor size: ≤2 cm in 155 cases (9.31%), >2 cm to 5 cm in 551 cases (33.09%), >5 cm to 10 cm in 636 cases (38.20%), >10 cm in 323 cases (19.40%). (2) Classification of hepatic blood vessels. Hepatic artery: type Ⅰ(normal type) in 1 494 cases(89.73%),variant hepatic artery in 171 cases (10.27%), including type Ⅱ in 35 cases, type Ⅲ in 38 cases, and other types in 98 cases. Hepatic vein: type Ⅰ (normal) in 1 195 cases (71.77%),variant hepatic veins in 470 cases(28.23%), including type Ⅱ in 376 cases and type Ⅲ in 94 cases. Portal vein:normal type in 1 315 cases (78.98%), variant portal veins in 350 cases (21.02%), including type Ⅰ in 189 cases, type Ⅱin 103 cases, type Ⅲ in 50 cases, type Ⅳ in 8 cases. Hepatic artery variation coexisting with portal vein variation in 24 cases (1.44%). Hepatic vein variation coexisting with portal vein variation in 113 cases (6.79%). Three types of vascular variation in 4 cases (0.24%), including coexistence of type Ⅱ hepatic artery variation or type Ⅰ portal vein variation with type Ⅲ hepatic vein variation in 2 cases,coexistence of type Ⅲ hepatic artery variation or type Ⅲ portal vein variation with type Ⅱ hepatic vein variation in 2 cases. (3) Preoperative liver volume calculation:1 499.3 (514.4)ml (range:641.7 to 6 637.0 ml) of total liver volume, including 479.1 (460.1) ml (range:10.5 to 2 086.8 ml) for liver resection and 959.9 (460.4)ml (range:306.1 to 5 638.0 ml) for residual function. (4)Operative methods: anatomical hepatectomy in 1 458 cases (87.57%); non-anatomic hepatectomy in 207 cases (12.43%). (5)the median operation time was 285(165)minutes (range: 40 to720 minutes). (6)The median intraoperative blood loss was 200(250)ml (range:10 to 4 200 ml) and 346 cases (20.78%) had intraoperative transfusion. (7)Pathology reports: hepatocellular carcinoma in 1 371 cases (82.34%), cholangiocarcinoma in 260 cases (15.62%) and mixed hepatocellular carcinoma in 34 cases (2.04%). Microvascular invasion: M0 in 199 cases, M1 in 64 cases, and M2 in 27 cases. (8)Postoperative complications in 207 cases (12.43%), including Clavien-Dindo grade Ⅰ or Ⅱ in 57 cases, grade Ⅲ or Ⅳ in 147 cases and grade Ⅴ in 3 cases.There were 13 cases (0.78%) of liver failure and 3 cases (0.18%) of perioperative death. (9) The follow-up time was 3.0 to 96.0 months, with a median time of 21.0(17.8) years. The overall 3-year survival and disease-free survival rates were 80.0% and 56.5%, respectively. The overall 5-year survival and disease-free survival rates were 59.7% and 30.0%, respectively. Conclusion: 3D visualization technology plays an important role in realizing accurate diagnosis of anatomical location and morphology of primary liver cancer, improving the success rate of surgery and reducing the incidence of complications.

[From digital virtual human, three-dimensional visualization to digital intelligence in liver surgery].

Digital intelligent hepatobiliary surgery has evolved over decades.It has experienced an evolution course from digital virtual human technology to the establishment of a quality-controlled and homogeneous three-dimensional visualization system for precision diagnosis and treatment of diseases, from three-dimensional visualization to the clinical transformation of digital intelligent technology and changes in the diagnosis and treatment model, from empirical diagnosis of diseases to the application of deep learning for the intelligent diagnosis and treatment of diseases, from empirical surgery to real-time multi-modal image guidance during surgery, and from the morphological diagnosis of tumors to accurate diagnosis from molecular imaging.During the whole process, only through continuous innovation in research, theory and technology can the "life" of digital intelligent surgery be endowed with new vitality.In the future, the definition of tumor boundary from the molecular and cellular levels and the early diagnosis and treatment of liver tumor through the functional visualization of key molecules will have significant clinical value for changing the prognosis of liver cancer.In addition, in order to realize intelligent navigation for hepatectomy and break through the technical bottleneck, it is of great clinical significance to develop an intelligent robot real-time navigation hepatectomy system with automatic navigation technology, machine learning intelligent planning technology and multimodal image fusion technology.This provides unprecedented opportunities and challenges for the development of digital intelligent hepatobiliary surgery.

Phase-contrast computed tomography: A correlation study between portal pressure and three dimensional microvasculature of ex vivo liver samples from carbon tetrachloride-induced liver fibrosis in rats.

OBJECTIVE: Microvascular changes in liver fibrosis are considered as an important pathophysiological characteristic. Now, there is a lack of high-resolution three-dimensional (3D) imaging methods for observing the microvasculature throughout the entire livers. This study aims to investigate the 3D microvascular changes in the whole fibrotic livers via X-ray phase-contrast computed tomography (PCCT) and explore the correlations between portal pressures and microvascular changes in liver fibrosis progression. METHODS: Twenty-three fibrotic rats were imaged ex vivo using PCCT. Morphological changes of the microvasculature were characterized using tortuosity, texture features of the vascular inner wall, fractal dimension (FD) and Murray's deviation (MD), and quantitative changes were evaluated by microvascular density (MVD). The degree of liver fibrosis was assessed by histochemistry, and the portal pressure of each rat was measured before euthanasia. RESULTS: Using PCCT, subtle vascular structures in fibrotic livers were revealed in the 3D modality, and the qualitative description and quantitative evaluation of microvascular changes showed important differences during the progression of liver fibrosis. Moreover, microvascular changes, including tortuosity, texture features of the vascular inner wall, MD and MVD, exhibited good correlations with the fibrosis area (R ≥ 0.729, P < 0.001) and portal pressure (R ≥ 0.715, P < 0.001) in the development of fibrosis. CONCLUSIONS: PCCT technique demonstrates outstanding potential for 3D visualization of microvasculature in liver fibrosis. Microvascular changes in fibrotic livers may serve as a new surrogate histopathological marker in evaluating portal pressures or prognosing portal hypertension.