Suppressing metal corrosion through identification of optimal crystallographic plane for Zn batteries.

Direct use of metals as battery anodes could significantly boost the energy density, but suffers from limited cycling. To make the batteries more sustainable, one strategy is mitigating the propensity for metals to form random morphology during plating through orientation regulation, e.g., hexagonal Zn platelets locked horizontally by epitaxial electrodeposition or vertically aligned through Zn/electrolyte interface modulation. Current strategies center around obtaining (002) faceted deposition due to its minimum surface energy. Here, benefiting from the capability of preparing a library of faceted monocrystalline Zn anodes and controlling the orientation of Zn platelet deposits, we challenge this conventional belief. We show that while monocrystalline (002) faceted Zn electrode with horizontal epitaxy indeed promises the highest critical current density, the (100) faceted electrode with vertically aligned deposits is the most important one in suppressing Zn metal corrosion and promising the best reversibility. Such uniqueness results from the lowest electrochemical surface area of (100) faceted electrode, which intrinsically builds upon the surface atom diffusion barrier and the orientation of the pallets. These new findings based on monocrystalline anodes advance the fundamental understanding of electrodeposition process for sustainable metal batteries and provide a paradigm to explore the processing-structure-property relationships of metal electrodes.

Graphene oxide-polyamine preprogrammable nanoreactors with sensing capability for corrosion protection of materials.

Corrosion is one of the major issues for sustainable manufacturing globally. The annual global cost of corrosion is US$2.5 trillion (approximately 3.4% of the world's GDP). The traditional ways of corrosion protection (such as barriers or inhibiting) are either not very effective (in the case of barrier protection) or excessively expensive (inhibiting). Here, we demonstrate a concept of nanoreactors, which are able to controllably release or adsorb protons or hydroxides directly on corrosion sites, hence, selectively regulating the corrosion reactions. A single nanoreactor comprises a nanocompartment wrapped around by a pH-sensing membrane represented, respectively, by a halloysite nanotube and a graphene oxide/polyamine envelope. A nanoreactor response is determined by the change of a signaling pH on a given corrosion site. The nanoreactors are self-assembled and suitable for mass-line production. The concept creates sustainable technology for developing smart anticorrosion coatings, which are nontoxic, selective, and inexpensive.

Photonic crystals built by time in ancient Roman glass.

Ancient glass objects typically show distinctive effects of deterioration as a result of environmentally induced physicochemical transformations of their surface over time. Iridescence is one of the distinctive signatures of aging that is most commonly found on excavated glass. In this work, we present an ancient glass fragment that exhibits structural color through surface weathering resulting in iridescent patinas caused by silica reprecipitation in nanoscale lamellae. This archaeological artifact reveals an unusual hierarchically assembled photonic crystal with extremely ordered nanoscale domains, high spectral selectivity, and reflectivity (~90%), that collectively behaves like a gold mirror. Optical characterization paired with nanoscale elemental analysis further underscores the high quality of this structure providing a window into this sophisticated natural photonic crystal assembled by time.

Unveiling Corrosion Pathways of Sn Nanocrystals through High-Resolution Liquid Cell Electron Microscopy.

Unveiling materials' corrosion pathways is significant for understanding the corrosion mechanisms and designing corrosion-resistant materials. Here, we investigate the corrosion behavior of Sn@Ni3Sn4 and Sn nanocrystals in an aqueous solution in real time by using high-resolution liquid cell transmission electron microscopy. Our direct observation reveals an unprecedented level of detail on the corrosion of Sn metal with/without a coating of Ni3Sn4 at the nanometric and atomic levels. The Sn@Ni3Sn4 nanocrystals exhibit "pitting corrosion", which is initiated at the defect sites in the Ni3Sn4 protective layer. The early stage isotropic etching transforms into facet-dependent etching, resulting in a cavity terminated with low-index facets. The Sn nanocrystals under fast etching kinetics show uniform corrosion, and smooth surfaces are obtained. Sn nanocrystals show "creeping-like" etching behavior and rough surfaces. This study provides critical insights into the impacts of coating, defects, and ion diffusion on corrosion kinetics and the resulting morphologies.

Damage-Tolerant Wood Layers for Corrosion Protection of Metal Structures.

Mechanically strong and damage-tolerant corrosion protection layers are of great technological importance. However, corrosion protection layers with high modulus (>1.5 GPa) and tensile strength (>100 MPa) are rare. Here, we report that a 130 µm thick densified wood veneer with a Young's modulus of 34.49 GPa and tensile strength of 693 MPa exhibits both low diffusivity for metal ions and the ability of self-recovery from mechanical damage. Densified wood veneer is employed as an intermediate layer to render a mechanically strong corrosion protection structure, referred to as "wood corrosion protection structure", or WCPS. The corrosion rate of low-carbon steel protected by WCPS is reduced by 2 orders of magnitude than state-of-the-art corrosion protection layers during a salt spray test. The introduction of engineered wood veneer as a thin and mechanically strong material points to new directions of sustainable corrosion protection design.

Graphene Enables Aluminum Current Collectors of 5 V Class Battery.

The five volt-class battery is one promising candidate of high energy density lithium-ion batteries. However, it suffers from limited electrochemical performance due to many problems, one of which is Al current collector corrosion. The corrosion greatly affects the electrochemical performance of batteries, so uncovering the Al corrosion mechanism and developing its protection strategy in the 5 V-class battery becomes important. Here, we experimentally realize a corrosion-resistant Al current collector via graphene protection. The experimental and theoretical calculation indicate that graphene can work as a physical barrier to inhibit direct contact between LiPF6-based electrolyte and an Al current collector, reducing the side reactions between Al current collector and HF originated from electrolyte. What is more, graphene increases the Al corrosion reaction potential, raising the difficulty of electrochemical corrosion. These effects improve the electrochemical performance of the 5 V-class battery, especially the rate performance and cycling stability. The work is beneficial for the development of a 5 V-class battery.

Direct Visualization of Chemical Transport in Solid-State Chemical Reactions by Time-of-Flight Secondary Ion Mass Spectrometry.

Systematic control and design of solid-state chemical reactions are required for modifying materials properties and in novel synthesis. Understanding chemical dynamics at the nanoscale is therefore essential to revealing the key reactive pathways. Herein, we combine focused ion beam-scanning electron microscopy (FIB-SEM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) to track the migration of sodium from a borate coating to the oxide scale during in situ hot corrosion testing. We map the changing distribution of chemical elements and compounds from 50 to 850 °C to reveal how sodium diffusion induces corrosion. The results are validated by in situ X-ray diffraction and post-mortem TOF-SIMS. We additionally retrieve the through-solid sodium diffusion rate by fitting measurements to a Fickian diffusion model. This study presents a step change in analyzing microscopic diffusion mechanics with high chemical sensitivity and selectivity, a widespread analytical challenge that underpins the defining rates and mechanisms of solid-state reactions.

Corrosion Dynamics of Carbon-Supported Platinum Electrocatalysts with Metal-Carbon Interactions Revealed by In Situ Liquid Transmission Electron Microscopy.

Carbon support is essential for electrocatalysis, but limitations remain, as carbon corrosion can lead to electrocatalyst degradation and affect the long-term durability of electrocatalysts. Here, we studied the corrosion dynamics of carbon nanotubes (CNTs) and Vulcan carbon (VC) together with platinum (Pt) nanoparticles in real time by liquid cell (LC) transmission electron microscopy (TEM). The results showed that CNTs with a high degree of graphitization exhibited higher corrosion resistance compared to VC. Furthermore, we observed that the main degradation path of Pt nanoparticles in Pt/CNTs was ripening, while in Pt/VC, it was aggregation and coalescence, which was dominated by the interactions between Pt nanoparticles and different hybridization of carbon supports. Finally, we performed an ex situ CV stability test to confirm the conclusions obtained from in situ experiments. This work provides deep insights into the corrosion mechanism of carbon-supported electrocatalysts to optimize the design of electrocatalysts with a higher durability.

Multiscale Regulation of Ordered PtCu Intermetallic Electrocatalyst for Highly Durable Oxygen Reduction Reaction.

Transforming the Pt-M alloy into an ordered intermetallic is an effective strategy to improve the electrocatalytic activity and stability toward the oxygen reduction reaction (ORR). However, the synthesis of nanosized intermetallics remains challenging. Herein, we report an efficient ORR electrocatalyst, consisting of a monodisperse nanosized PtCu intermetallic on hollow mesoporous carbon spheres (HMCS). As predicted by theoretical calculations, PtCu intermetallics exhibit beneficial electronic structure, with a low theoretical overpotential of 0.33 V and enhanced Cu stability. Resulting from the multiscale modulation of catalyst structure, the O-PtCu/HMCS catalyst delivers a high mass activity of 2.73 A cm-2Pt at 0.9 V and remarkable stability. Identical location transmission electron microscopy (IL-TEM) investigations demonstrate that the rate of carbon corrosion is alleviated on HMCS, which contributes to the long-term durability. This work provides a promising design strategy for an ORR electrocatalyst, and the IL-TEM investigations offer new perspectives for the performance enhancement mechanism.

A Multifunctional Coating with Active Corrosion Protection Through a Synergistic pH- and Thermal-Responsive Mechanism.

This article aims to develop CeO2 nanocontainer-constructed coating with a synergistic self-healing and protective nature through a simple mechanical blending technique to manage metal corrosion. The proposed coating exhibits excellent corrosion resistance, which is primarily attributed to the combination of thermal-driven healing and active corrosion inhibition. Paraffin wax and 2-polybenzothiazole-loaded CeO2 nanotubes (CeO2-MBT) are directly doped into epoxy coating to perform such a multifunctional role. CeO2 nanocontainers and encapsulated corrosion inhibitor MBT can be released by pH triggers to achieve instant corrosion inhibition upon the surface of metal substrate. In addition, any physical defects in the coating are responsively repaired by heating incorporated paraffin wax to regain structural integrity and consequent barrier function. Corrosion protection efficiency remains sufficient even after ten cycles of damage and healing. Such a multiple-functional coating strategy provides an alternative pathway toward efficient and sustainable performance to tackle corrosion-related challenges of metal components in both short-term and long-term services.

Copper-Graphene Composite (CGC) Conductors: Synthesis, Microstructure, and Electrical Performance.

Improving the electrical performance of copper, the most widely used electrical conductor in the world is of vital importance to the progress of key technologies, including electric vehicles, portable devices, renewable energy, and power grids. Copper-graphene composite (CGC) stands out as the most promising candidate for high-performance electrical conductor applications. This can be attributed to the superior properties of graphene fillers embedded in CGC, including excellent electrical and thermal conductivity, corrosion resistance, and high mechanical strength. This review highlights the recent progress of CGC conductors, including their fabrication processes, electrical performances, mechanisms of copper-graphene interplay, and potential applications.

Remotely Controlled Electrochemical Degradation of Metallic Implants.

Biodegradable medical implants promise to benefit patients by eliminating risks and discomfort associated with permanent implantation or surgical removal. The time until full resorption is largely determined by the implant's material composition, geometric design, and surface properties. Implants with a fixed residence time, however, cannot account for the needs of individual patients, thereby imposing limits on personalization. Here, an active Fe-based implant system is reported whose biodegradation is controlled remotely and in situ. This is achieved by incorporating a galvanic cell within the implant. An external and wireless signal is used to activate the on-board electronic circuit that controls the corrosion current between the implant body and an integrated counter electrode. This configuration leads to the accelerated degradation of the implant and allows to harvest electrochemical energy that is naturally released by corrosion. In this study, the electrochemical properties of the Fe-30Mn-1C/Pt galvanic cell model system is first investigated and high-resolution X-ray microcomputed tomography is used to evaluate the galvanic degradation of stent structures. Subsequently, a centimeter-sized active implant prototype is assembled with conventional electronic components and the remotely controlled corrosion is tested in vitro. Furthermore, strategies toward the miniaturization and full biodegradability of this system are presented.

Zn Anode Surviving Extremely Corrosive Polybromide Environment with Alginate-Graphene Oxide Hydrogel Coating.

Zinc-bromine (Zn-Br) redox provides a high energy density and low-cost option for next-generation energy storage systems, and polybromide diffusion remains a major issue leading to Zn anode corrosion, dendrite growth, battery self-discharge and limited electrochemical performance. A dual-functional Alginate-Graphene Oxide (AGO) hydrogel coating is proposed to prevent polybromide corrosion and suppress dendrite growth in Zn-Br batteries through negatively charged carboxyl groups and enhanced mechanical properties. The battery with anode of plain zinc coated with AGO (Zn]AGO) survives a severely corrosive environment with higher polybromide concentration than usual without a membrane, and achieves 80 cycles with 100% Coulombic and 80.65% energy efficiencies, four times compared to plain Zn anode. The promising performance is comparable to typical Zn-Br batteries using physical membranes, and the AGO coating concept can be well adapted to various Zn-Br systems to promote their applications.

Dual-Functional Ru/Ni-B-P Electrocatalyst Toward Accelerated Water Electrolysis and High-Stability.

Development of advanced electrocatalysts for the green hydrogen production by water electrolysis is an important task to reduce the climate and environmental issues as well as to meet the future energy demands. Herein, Ru/Ni-B-P sphere electrocatalyst is demonstrated by a combination of hydrothermal and soaking approaches, meeting the industrial requirement of low cell voltage with stable high-current operation. The Ru/Ni-B-P sphere catalyst demonstrates low overpotentials of 191 and 350 mV at 300 mA cm-2 with stable high current operation, ranking it as one of the best oxygen evolution reaction (OER) electrocatalysts. The bifunctional 2-E system demonstrates a low cell voltage of 2.49 V at 2000 mA cm-2 in 6 m KOH at 60 °C of harsh industrial operation condition. It also demonstrates outstanding stability with continuous 120 h (5 days) CA operation at 1000 mA cm-2. Further, the hybrid configuration of Ru/Ni-B-P || Pt/C being paired with the conventional benchmark electrode demonstrates a record low 2-E cell voltage of 2.40 V at 2000 mA cm-2 in 6 m KOH and excellent stability at high current of 1500 mA cm-2 under industrial operational condition.

Unveiling Local Aging Patterns Following Accelerated Stress Testing of High-Performance Polymer Electrolyte Fuel Cells.

This study presents an in-depth analysis of heterogeneous aging patterns in membrane electrode assemblies (MEAs) subjected to diverse accelerated stress test (AST) conditions, simulating carbon corrosion (CC AST) and Pt particle size growth in fully humidified (Pt AST-Wet) and underhumidified (Pt AST-Dry) H2/N2 atmospheres. Multimodal characterization techniques are used to focus on heterogeneous aging patterns, primarily examining the variations in current distributions and Pt particle size maps. The findings reveal distinct characteristics of current distributions for all the AST cases, with substantial changes and strong current gradients in the CC AST case, indicative of severe performance degradation. Notably, despite significant differences in Pt particle size growth at the end-of-life (EOL), the Pt AST-Wet and Pt AST-Dry cases show minor changes in spatial current distributions. Moreover, a preferential growth of Pt particles under serpentine flow field bends in the Pt AST-Wet case is observed for the first time. This study provides crucial insights into the role of mass transport properties in shaping fuel cell performance, and highlights the need to consider factors beyond electrochemically-active surface area (ECSA) when assessing fuel cell durability.

Nanodiamond Coating in Energy and Engineering Fields: Synthesis Methods, Characteristics, and Applications.

Nanodiamonds are metastable allotropes of carbon. Based on their high hardness, chemical inertness, high thermal conductivity, and wide bandgap, nanodiamonds are widely used in energy and engineering applications in the form of coatings, such as mechanical processing, nuclear engineering, semiconductors, etc., particularly focusing on the reinforcement in mechanical performance, corrosion resistance, heat transfer, and electrical behavior. In mechanical performance, nanodiamond coatings can elevate hardness and wear resistance, improve the efficiency of mechanical components, and concomitantly reduce friction, diminish maintenance costs, particularly under high-load conditions. Concerning chemical inertness and corrosion resistance, nanodiamond coatings are gradually becoming the preferred manufacturing material or surface modification material for equipment in harsh environments. As for heat transfer, the extremely high coefficient of thermal conductivity of nanodiamond coatings makes them one of the main surface modification materials for heat exchange equipment. The increase of nucleation sites results in excellent performance of nanodiamond coatings during the boiling heat transfer stage. Additionally, concerning electrical properties, nanodiamond coatings elevate the efficiency of solar cells and fuel cells, and great performance in electrochemical and electrocatalytic is found. This article will briefly describe the application and mechanism analysis of nanodiamonds in the above-mentioned fields.

Vanadium-Doped Heterogeneous Bimetallic Phosphides Derived from Layered Double Hydroxides for Saline Water Splitting.

The development of energy- and time-saving synthetic methods to prepare bifunctional and high stability catalysts are vital for overall water splitting. Here, V-doped nickel-iron hydroxide precursor by etching NiFe foam (NFF) at room temperature with dual chloride solution ("NaCl-VCl3"), is obtained then phosphating to obtain V-Ni2P-FeP/NFF as efficient bifunctional (oxygen/hydrogen exchange reaction, OER/HER) electrocatalysts, denoted as NFF(V, Na)-P. The NFF(V, Na)-P requires only 185 and 117 mV overpotentials to reach 10 mA cm-2 for OER and HER. When used as a catalyst for water splitting in a full cell, it can be stably sustained for more than 1000 h in alkaline brine electrolysis at both current densities of 100 and 500 mA cm-2. In situ Raman analyses and density functional theory (DFT) show that the V-doping-induced surface remodeling generates hydroxyl oxides as the true catalytic active centers, which not only enhances the reaction kinetics, but also reduces the free energy change in the rate-determining step. This work provides a cost-effective substrate self-derivation method to convert commercial NFF into a powerful catalyst for electrolytic brine, offering a unique route to the development of efficient electrocatalysts for saline water splitting.

Building Cobalt-Nickel Diatomic Sites as Oxygenophilic ORR Catalyst with Strong Cl--Corrosion Resistance for Seawater Batteries.

The seawater battery (SWB) holds great potential as the next-generation energy supply system for marine electrical equipment. However, its efficiency and durability are hindered by low oxygen concentration and harmful Cl- adsorption and corrosion in seawater. Herein, a host-guest strategy is developed to fabricate diatomic catalysts with adjacent Co and Ni sites on nitrogen-doped carbon (CoNi-DAC), where Co and Ni atoms are each coordinated to three nitrogen atoms. Theoretical calculations and in situ characterization reveal that the synchronized reduction of Co and Ni valence states enhances ORR kinetics by optimizing the O2 adsorption energy barrier, facilitating direct O─O bond cleavage and preventing *OOH intermediate formation. This electronic modulation enhances oxygenophilicity and Cl- corrosion resistance. The Co/Ni diatomic sites synergistically improve ORR catalytic activity, achieving a half-wave potential (E1/2) of 0.79 V and exceptional long-term durability of nearly 700 h in natural seawater. The assembled SWB with CoNi-DAC coated carbon brush electrode attains a peak power density of 3.3 W L-1. This work offers valuable insights into the design and development of advanced ORR electrocatalysts for natural seawater environments.

Improved Interfacial Interactions by Core-Shell CoFe2O4@SiO2 Composites to Enhance the Ability of Corrosion Resistance and Electromagnetic Wave Absorption.

With the rapid development of science and technology, stealth and anti-corrosion activities in oceans have attracted widespread attention. This study successfully prepares CoFe2O4@SiO2 with a core-shell structure. This core-shell structure endows the CoFe2O4@SiO2 with good impedance matching and interfacial polarization. Thus, the CoFe2O4@SiO2 exhibits an excellent electromagnetic wave absorption performance with a minimum reflection loss of -45.16 dB. Moreover, the CoFe2O4@SiO2 exhibits an excellent dispersion ability in epoxy. The corrosion resistance of the CoFe2O4@SiO2/epoxy is enhanced. After 60 days of immersion, the low-frequency impedance modulus of the CoFe2O4@SiO2/epoxy is still >109 Ω cm2. The CoFe2O4@SiO2 realize the dual functions of stealth and anti-corrosion, which provide ideas for developing marine stealth applications.

Transforming Undesired Corrosion Products into a Nanoflake-Array Functional Layer: A Gelatin-Assistant Modification Strategy for High Performance Zn Battery Anodes.

As corrosion products of Zn anodes in ZnSO4 electrolytes, Zn4SO4 (OH)6·xH2O with loose structure cannot suppress persistent side reactions but can increase the electrode polarization and induce dendrite growth, hindering the practical applications of Zn metal batteries. In this work, a functional layer is built on the Zn anode by a gelatin-assistant corrosion and low-temperature pyrolysis method. With the assistant of gelatin, undesired corrosion products are converted into a uniform nanoflake array comprising ZnO coated by gelatin-derived carbon on Zn foil (denoted Zn@ZnO@GC). It is revealed that the gelatin-derived carbons not only enhance the electron conductivity, facilitate Zn2+ desolvation, and boost transport/deposition kinetics, but also inhibit the occurrence of hydrogen evolution and corrosion reactions on the zincophilic Zn@ZnO@GC anode. Moreover, the 3D nanoflake array effectively homogenizes the current density and Zn2+ concentration, thus inhibiting the formation of dendrites. The symmetric cells using the Zn@ZnO@GC anodes exhibit superior cycling performance (over 7000 h at 1 mA cm-2/1 mAh cm-2) and without short-circuiting even up to 25 mAh cm-2. The Zn@ZnO@GC||NaV3O8 full cell works stably for 5000 cycles even with a limited N/P ratio of ≈5.5, showing good application prospects.