Narrowband Internet of Things via Low Earth Orbit Satellite Networks: An Efficient Coverage Enhancement Mechanism Based on Stochastic Geometry Approach.

With the development of IoT technology and 5G massive machine-type communication, the 3GPP standardization body considered as viable the integration of Narrowband Internet of Things (NB-IoT) in low Earth orbit (LEO) satellite-based architectures. However, the presence of the LEO satellite channel comes up with new challenges for the NB-IoT random access procedures and coverage enhancement mechanism. In this paper, an Adaptive Coverage Enhancement (ACE) method is proposed to meet the requirement of random access parameter configurations for diverse applications. Based on stochastic geometry theory, an expression of random access channel (RACH) success probability is derived for LEO satellite-based NB-IoT networks. On the basis of a power consumption model of the NB-IoT terminal, a multi-objective optimization problem is formulated to trade-off RACH success probability and power consumption. To solve this multi-objective optimization problem, we employ the Non-dominated Sorting Genetic Algorithms-II (NSGA-II) method to obtain the Pareto-front solution set. According to different application requirements, we also design a random access parameter configuration method to minimize the power consumption under the constraints of RACH success probability requirements. Simulation results show that the maximum number of repetitions and back-off window size have a great influence on the system performance and their value ranges should be set within [4, 18] and [0, 2048]. The power consumption of coverage enhancement with ACE is about 58% lower than that of the 3GPP proposed model. All this research together provides good reference for the scale deployment of NB-IoT in LEO satellite networks.

Power Efficient Random Access for Massive NB-IoT Connectivity.

Sensors enabled Internet of things (IoT) has become an integral part of the modern, digital and connected ecosystem. Narrowband IoT (NB-IoT) technology is one of its economical versions preferable when low power and resource limited sensors based applications are considered. One of the major characteristics of NB-IoT technology is its offer of reliable coverage enhancement (CE) which is achieved by repeating the transmission of signals. This repeated transmission of the same signal challenges power saving in low complexity NB-IoT devices. Additionally, the NB-IoT devices are expected to suffer from congestion due to simultaneous random access procedures (RAPs) from an enormous number of devices. Multiple RAP reattempts would further reduce the power saving in NB-IoT devices. We propose a novel power efficient RAP (PE-RAP) for reducing power consumption of NB-IoT devices in a highly congested environment. The existing RAP do not differentiate the failures due to poor channel conditions or due to collision. After the RAP failure either due to collision or poor channel, the devices can apply power ramping or can transit to a higher CE level with higher repetition configuration. In the proposed PE-RAP, the NB-IoT devices can re-ascertain the channel conditions after an RAP attempt failure such that the impediments due to poor channel are reduced. The power increments and repetition enhancements are applied only when necessary. We probabilistically obtain the chances of RAP reattempts. Subsequently, we evaluate the average power consumption by devices in different CE levels for different repetition configurations. We validate our analysis by simulation studies.

Design and implementation of multi-band reflectarray metasurface for 5G millimeter wave coverage enhancement.

A compact low-profile multi-band millimeter-wave (mm-wave) reflectarray metasurface design is presented for coverage enhancement in 5G and beyond cellular communication. The proposed single-layer metasurface exhibits a stable reflection response under oblique incidence angles of up to 60 ∘ at 24 and 38 GHz, and transmission response at 30 GHz, effectively covering the desired 5G mm-wave frequency bands. The proposed reflectarray metasurface is polarization insensitive and performs equally well under TE and TM polarized incident waves due to the symmetric pattern. In addition, the low profile of the proposed metasurface makes it appropriate for conformal applications. In comparison to the state-of-the-art, the proposed reflectarray metasurface unit cell design is not only compact (3.3  ×  3.3 mm 2 ) but also offers two reflections and one transmission band based on a single-layer structure. It is easy to reconfigure the proposed metasurface unit cell for any other frequency band by adjusting a few design parameters. To validate the concept of coverage enhancement, a 32  ×  x32 unit-cell prototype of the proposed reflectarray metasurface is fabricated and measured under different scenarios. The experimental results demonstrate that a promising signal enhancement of 20-25 dB is obtained over the entire 5G mm-wave n258, n259, and n260 frequency bands. The proposed reflectarray metasurface has a high potential for application in mm-wave 5G networks to improve coverage in dead zones or to overcome obstacles that prevent direct communication linkages.

Effects of Address Coverage Enhancement on Estimates from Address-Based Sampling Studies.

For over a decade, address-based sampling (ABS) frames have often been used to draw samples for multistage area sample surveys in lieu of traditionally listed (or enumerated) address frames. However, it is well known that the use of ABS frames for face-to-face surveys suffer from undercoverage due to, for example, households that receive mail via a PO Box rather than being delivered to the household's street address. Undercoverage of ABS frames has typically been more prominent in rural areas but can also occur in urban areas where recent construction of households has taken place. Procedures have been developed to supplement ABS frames to address this undercoverage. In this article, we investigate a procedure called Address Coverage Enhancement (ACE) that supplements the ABS frame with addresses not found on the frame, and the resulting effects the addresses added to the sample through ACE have on estimates. Weighted estimates from two studies, the Population Assessment of Tobacco and Health Study and the 2017 US Program for the International Assessment of Adult Competencies, are calculated with and without supplemental addresses. Estimates are then calculated to assess if poststratifying analysis weights to control for urbanicity at the person level brings estimates closer to estimates from the supplemented frame. Our findings show that the noncoverage bias was likely minimal across both studies for a range of estimates. The main reason is because the Computerized Delivery Sequence file coverage rate is high, and when the coverage rate is high, only very large differences between the covered and not covered will result in meaningful bias.