Mechanisms of gut epithelial barrier impairment caused by food emulsifiers polysorbate 20 and polysorbate 80.

BACKGROUND: The rising prevalence of many chronic diseases related to gut barrier dysfunction coincides with the increased global usage of dietary emulsifiers in recent decades. We therefore investigated the effect of the frequently used food emulsifiers on cytotoxicity, barrier function, transcriptome alterations, and protein expression in gastrointestinal epithelial cells. METHODS: Human intestinal organoids originating from induced pluripotent stem cells, colon organoid organ-on-a-chip, and liquid-liquid interface cells were cultured in the presence of two common emulsifiers: polysorbate 20 (P20) and polysorbate 80 (P80). The cytotoxicity, transepithelial electrical resistance (TEER), and paracellular-flux were measured. Immunofluorescence staining of epithelial tight-junctions (TJ), RNA-seq transcriptome, and targeted proteomics were performed. RESULTS: Cells showed lysis in response to P20 and P80 exposure starting at a 0.1% (v/v) concentration across all models. Epithelial barrier disruption correlated with decreased TEER, increased paracellular-flux and irregular TJ immunostaining. RNA-seq and targeted proteomics analyses demonstrated upregulation of cell development, signaling, proliferation, apoptosis, inflammatory response, and response to stress at 0.05%, a concentration lower than direct cell toxicity. A proinflammatory response was characterized by the secretion of several cytokines and chemokines, interaction with their receptors, and PI3K-Akt and MAPK signaling pathways. CXCL5, CXCL10, and VEGFA were upregulated in response to P20 and CXCL1, CXCL8 (IL-8), CXCL10, LIF in response to P80. CONCLUSIONS: The present study provides direct evidence on the detrimental effects of food emulsifiers P20 and P80 on intestinal epithelial integrity. The underlying mechanism of epithelial barrier disruption was cell death at concentrations between 1% and 0.1%. Even at concentrations lower than 0.1%, these polysorbates induced a proinflammatory response suggesting a detrimental effect on gastrointestinal health.

Determination of mono- and diacylglycerols from E 471 food emulsifiers in aerosol whipping cream by high-performance thin-layer chromatography-fluorescence detection.

Mono- and diacylglycerol (MAG and DAG) emulsifiers (E 471) are widely applied to regulate techno-functional properties in different food categories, for example, in dairy products. A method for the determination of MAG and DAG in aerosol whipping cream by high-performance thin-layer chromatography with fluorescence detection (HPTLC-FLD) after derivatization with primuline was developed. For sample preparation, aerosol whipping cream was mixed with ethanol, followed by the addition of water and liquid-liquid extraction with tert-butyl methyl ether. The sample extracts were analyzed by HPTLC-FLD on silica gel LiChrospher plates with n-pentane/n-hexane/diethyl ether (22.5:22.5:55, v/v/v) as mobile phase, when interfering matrix like cholesterol and triacylglycerols were successfully separated from the E 471 food additives. For quantitation, an emulsifier with known composition was used as calibration standard and the fluorescent MAG and DAG were scanned at 366/> 400 nm. Limits of detection and quantitation of 4 and 11 mg/100 g aerosol whipping cream were obtained for both monostearin and 1,2-distearin, respectively, and allowed the reliable quantitation of MAG and DAG from E 471 far below commonly applied emulsifier amounts. Recoveries from model aerosol whipping cream with 400 mg E 471/100 g were determined in a calibration range of 200-600 mg E 471/100 g sample and ranged between 86 and 105% with relative standard deviations below 7%. In aerosol whipping creams from the German market, E 471 amounts ranged between 384 and 610 mg/100 g.

Changes in Intestinal Permeability Ex Vivo and Immune Cell Activation by Three Commonly Used Emulsifiers.

Food additives such as emulsifiers are used in increasing quantities in the food industry. The aim of this study was to compare three different emulsifiers (polysorbate 80 (P80), carboxymethyl cellulose (CMC), and ß-lactoglobulin (ß-lac) with regards to their effect on the stimulation of immune cells and intestinal permeability. The immune stimulatory effects were studied in the myeloid cell line MUTZ-3-cells, while the change in intestinal permeability was studied in the Caco-2 cell line and ex vivo in the Ussing chamber system using small intestinal fragments from rats. The tested concentrations of the emulsifiers ranged from 0.02% up to 1%, which are concentrations commonly used in the food industry. The results showed that P80 affected both the myeloid cells and the intestinal permeability more than CMC (p < 0.05) and ß-lac (p < 0.05) at the highest concentration. CMC was found to neither affect the permeability in the intestine nor the MUTZ-3 cells, while ß-lac changed the permeability in the total part of the small intestine in rats. These findings indicate that P80 might be more cytotoxic compared to the other two emulsifiers.

Influence of food emulsifiers on cellular function and inflammation, a preliminary study.

Emulsifiers are extensively used as food additives and their consumption is increasing in Western countries. However, so far only few studies examined their potential effects on intestinal cellular functions and gut inflammation. The aim of this preliminary analysis was to study the emulsifiers and their concentrations capable of causing cellular damage compared to extra virgin olive oil (EVOO). We tested two commonly used emulsifiers (EMI, EMII) and EVOO on Caco-2 cells, derived from a colon carcinoma and widely used as a model of the intestinal inflammation. The diphenyltetrazolium bromide test MTT and clonogenic assay were used to study the effect of emulsifiers on cell viability. Cell migration was determined by the wound-healing assay. The inflammation was studied by measuring the levels of interleukin 6 (IL-6) and monocyte chemoattractant protein-1/C-C motif chemokine ligand 2 (CCL2), multifunctional cytokines with a major role in the acute-phase response. Furthermore, we analyzed the effect of conditioned media of Caco-2 cells treated with EMs on macrophages activation. In conclusion, our preliminary data provide evidence that EMs increase the proliferation and migration rate of Caco-2 cells. Moreover, Caco-2 cells treated with EMs enhance the IL-6 and CCL2 release and activated macrophages, supporting their role as proinflammatory molecules.

Characterization of E 472 food emulsifiers - determination of bound and free fruit acids, free glycerol and ash content.

Emulsifiers of the type E 472 are esters of fruit acids and mono- and diacylglycerols (MAG and DAG), which are used to adjust techno-functional properties in various food products. The most dominant representatives of E 472 emulsifiers are acetic acid esters (E 472a), lactic acid esters (E 472b), citric acid esters (E 472c), and mono- and diacetyl tartaric acid esters (E 472e). For the determination of fruit acids, a high-performance liquid chromatography method with ultraviolet light (HPLC-UV) detection was developed. Free and total fruit acids were determined by reversed phase HPLC-UV analysis of untreated and saponified emulsifier extracts with 20 mM potassium hydrogen phosphate buffer (pH 2.6) as isocratic eluent. Limits of quantitation of 0.08-0.27 g free fruit acid/kg emulsifier and 4-14 g total fruit acid/kg granted a reliable method with recoveries for free and total fruit acids between 80 and 100% with relative standard deviations (%RSD) below 4%. For the quantitation of free glycerol by spectrophotometry, an enzymatic assay was optimized for the analysis of E 472 providing reliable results with %RSD values below 9%. In addition, the ash content of E 472 emulsifiers was determined.

Characterization of E 472 food emulsifiers by high-performance thin-layer chromatography with fluorescence detection and mass spectrometry.

Esters of fruit acids including acetic acid and mono- and diacylglycerols (MAG and DAG), also known as E 472 emulsifiers, are used in the food industry as food additives to adjust techno-functional properties like viscosity, emulsion stability and foaming stability in various products, mainly dairy products. Based on the respective acids, E 472 emulsifiers are classified in several categories with acetic acid esters (ACETEM, E 472a), lactic acid esters (LACTEM, E 472b), citric acid esters (CITREM, E 472c), and mono- and diacetyl tartaric acid esters (DATEM, E 472e) as the most prominent representatives. Besides fruit acid esters, E 472 emulsifiers mainly comprise MAG, DAG, triacylglycerols, free fatty acids, free fruit acids and free glycerol in different amounts. Here we present an innovative and sensitive method for the characterization of the composition of E 472 emulsifiers by high-performance thin-layer chromatography with fluorescence detection (HPTLC-FLD). For HPTLC-FLD, technical emulsifiers were simply dissolved and analyzed on HPTLC silica gel plates after a two-fold development and derivatization with primuline, enabling the easy characterization and direct visual comparison of the emulsifier pattern (fingerprint) through the fluorescent lipid components under UV 366 nm. Thus, the HPTLC-FLD fingerprint approach represents a simple tool for the comparison of different samples, batches and categories of E 472. Coupling of HPTLC to mass spectrometry moreover enabled the identification of constituents of interest.

Fatty acid ester surfactants derived from raffinose: Synthesis, characterization and structure-property profiles.

HYPOTHESIS: The development of functional and nutritional surfactants for the food industry remains a subject of great interest. Herein, therefore, we report on the design and synthesis of novel trisaccharide (raffinose) monoester-based surfactants in the expectation that they would display functional properties superior to certain disaccharide-based, commercially-deployed emulsifiers and thus have potential for industrial applications. EXPERIMENTS: The title esters were prepared by enzymatic methods and their properties as surfactants evaluated through determination of their HLB values, water solubilities, CMCs, foamabilities and foaming stabilities as well as through investigation of their impacts on the stability of oil-in-water emulsions over a range of storage times and under certain other conditions. FINDINGS: The emulsifying properties of 6-O-acylraffinose esters are dictated, in large part, by the length of the associated alkyl chains. The results of storage and environmental stress experiments revealed that the increasing length of alkyl chains enhances the stability of the derived emulsions. All the raffinose ester-stabilized oil-in-water emulsions displayed stratification effects under strongly acidic conditions (pH ≤ 4) or at high ionic strength (≥300 mM) while possessing reasonable resistance to variations in temperature. As such, a number of the raffinose monoesters showed greater stability to environmental stress than their commercially-deployed and sucrose-based counterparts. The structure-property profiles established through the present study provide a definitive guide for the development of raffinose esters as novel emulsifiers, particularly in the food industry.

Combined high-power ultrasound and high-pressure homogenization nanoemulsification: The effect of energy density, oil content and emulsifier type and content.

Combinations of ultrasound (US) and high-pressure homogenization (HPH) at low-medium energy densities were studied as alternative processes to individual US and HPH to produce Tween 80 and whey protein stabilized nanoemulsions, while reducing the energy input. To this aim, preliminary trials were performed to compare emulsification efficacy of single and combined HPH and US treatments delivering low-medium energy densities. Results highlighted the efficacy of US-HPH combined process in reducing the energy required to produce nanoemulsions stabilized with both Tween 80 and whey protein isolate. Subsequently, the effect of emulsifier content (1-3% w/w), oil amount (10-20% w/w) and energy density (47-175 MJ/m3) on emulsion mean particle diameter was evaluated by means of a central composite design. Particles of 140-190 nm were obtained by delivering 175 MJ/m3 energy density at emulsions containing 3% (w/w) Tween 80 and 10% (w/w) oil. In the case of whey protein isolate stabilized emulsions, a reduced emulsifier amount (1% w/w) and intermediate energy density (120 MJ/m3) allowed a minimum droplet size around 220-250 nm to be achieved. Results showed that, in both cases, at least 50% of the energy density should be delivered by HPH to obtain the minimum particle diameter.

Characterization of E 471 food emulsifiers by high-performance thin-layer chromatography-fluorescence detection.

Mono- and diacylglycerol (MAG and DAG) emulsifiers, also known as food additive E 471, are widely used to adjust techno-functional properties in various foods. Besides MAGs and DAGs, E 471 emulsifiers additionally comprise different amounts of triacylglycerols (TAGs) and free fatty acids (FFAs). MAGs, DAGs, TAGs and FFAs are generally determined by high-performance liquid chromatography (HPLC) or gas chromatography (GC) coupled to mass selective detection, analyzing the individual representatives of the lipid classes. In this work we present a rapid and sensitive method for the determination of MAGs, DAGs, TAGs and FFAs in E 471 emulsifiers by high-performance thin-layer chromatography with fluorescence detection (HPTLC-FLD), including a response factor system for quantitation. Samples were simply dissolved and diluted with t-butyl methyl ether before a two-fold development was performed on primuline pre-impregnated LiChrospher silica gel plates with diethyl ether and n-pentane/n-hexane/diethyl ether (52:20:28, v/v/v) as the mobile phases to 18 and 75 mm, respectively. For quantitation, the plate was scanned in the fluorescence mode at UV 366/>400 nm, when the cumulative signal for each lipid class was used. Calibration was done with 1,2-distearin and amounts of lipid classes were calculated with response factors and expressed as monostearin, distearin, tristearin and stearic acid. Limits of detection and quantitation were 1 and 4 ng/zone, respectively, for 1,2-distearin. Thus, the HPTLC-FLD approach represents a simple, rapid and convenient screening alternative to HPLC and GC analysis of the individual compounds. Visual detection additionally enables an easy characterization and the direct comparison of emulsifiers through the lipid class pattern, when utilized as a fingerprint.