RESUMO
We describe deep analysis of the human proteome in less than 1 h. We achieve this expedited proteome characterization by leveraging state-of-the-art sample preparation, chromatographic separations, and data analysis tools, and by using the new Orbitrap Astral mass spectrometer equipped with a quadrupole mass filter, a high-field Orbitrap mass analyzer, and an asymmetric track lossless (Astral) mass analyzer. The system offers high tandem mass spectrometry acquisition speed of 200 Hz and detects hundreds of peptide sequences per second within data-independent acquisition or data-dependent acquisition modes of operation. The fast-switching capabilities of the new quadrupole complement the sensitivity and fast ion scanning of the Astral analyzer to enable narrow-bin data-independent analysis methods. Over a 30-min active chromatographic method consuming a total analysis time of 56 min, the Q-Orbitrap-Astral hybrid MS collects an average of 4319 MS1 scans and 438,062 tandem mass spectrometry scans per run, producing 235,916 peptide sequences (1% false discovery rate). On average, each 30-min analysis achieved detection of 10,411 protein groups (1% false discovery rate). We conclude, with these results and alongside other recent reports, that the 1-h human proteome is within reach.
Assuntos
Proteoma , Proteômica , Espectrometria de Massas em Tandem , Humanos , Proteoma/análise , Proteômica/métodos , Fatores de TempoRESUMO
During beam time at a research facility, alignment and optimization of instrumentation, such as spectrometers, is a time-intensive task and often needs to be performed multiple times throughout the operation of an experiment. Despite the motorization of individual components, automated alignment solutions are not always available. In this study, a novel approach that combines optimisers with neural network surrogate models to significantly reduce the alignment overhead for a mobile soft X-ray spectrometer is proposed. Neural networks were trained exclusively using simulated ray-tracing data, and the disparity between experiment and simulation was obtained through parameter optimization. Real-time validation of this process was performed using experimental data collected at the beamline. The results demonstrate the ability to reduce alignment time from one hour to approximately five minutes. This method can also be generalized beyond spectrometers, for example, towards the alignment of optical elements at beamlines, making it applicable to a broad spectrum of research facilities.
RESUMO
Understanding and controlling the structure and function of liquid interfaces is a constant challenge in biology, nanoscience and nanotechnology, with applications ranging from molecular electronics to controlled drug release. X-ray reflectivity and grazing incidence diffraction provide invaluable probes for studying the atomic scale structure at liquid-air interfaces. The new time-resolved laser system at the LISA liquid diffractometer situated at beamline P08 at the PETRAâ III synchrotron radiation source in Hamburg provides a laser pump with X-ray probe. The femtosecond laser combined with the LISA diffractometer allows unique opportunities to investigate photo-induced structural changes at liquid interfaces on the pico- and nanosecond time scales with pump-probe techniques. A time resolution of 38â ps has been achieved and verified with Bi. First experiments include laser-induced effects on salt solutions and liquid mercury surfaces with static and varied time scales measurements showing the proof of concept for investigations at liquid surfaces.
RESUMO
Mass spectrometry (MS) has become a powerful technique for clinical applications with high sensitivity and specificity. Different from conventional MS diagnosis in laboratory, point-of-care (POC) analyses in clinics require mass spectrometers and analytical procedures to be friendly for novice users and applicable for on-site clinical diagnosis. The recent decades have seen the progress in the development of miniature mass spectrometers, providing a promising solution for clinical POC applications. In this review, we report recent advances of miniature mass spectrometers and their exploration in clinical applications, mainly including the rapid analysis of illegal drugs, on-site monitoring of therapeutic drugs, and detection of biomarkers. With improved analytical performance, miniature mass spectrometers are also expected to apply to more and more clinical applications. Some promising POC analyses that can be performed by miniature mass spectrometers in the future are discussed. Lastly, we also provide our perspectives on the challenges in technical development of miniature mass spectrometers for clinical POC analysis.
RESUMO
We report two uncommon cases of osteosynthetic cervical spine infection. Clinical patient features, microbiological strain characteristics, diagnostic methods, and treatment were analyzed. Both patients were male, and one had risk factors for surgical site infection. During surgery, perioperative samples were positive yielding an anaerobic microorganism identified as Cutibacterium namnetense by MALDI-TOF MS and confirmed by 16S rRNA/gyrB genes sequencing. All isolates were fully susceptible. C. namnetense osteosynthetic cervical spine infections are rare. Both cases were early surgical site infections. Bruker MALDI-TOF MS appears to be an excellent tool for rapid and accurate identification. Amoxicillin seems to be an option for the treatment.
Assuntos
Propionibacteriaceae , Humanos , Masculino , Feminino , RNA Ribossômico 16S/genética , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Vértebras CervicaisRESUMO
We present the design of a portable coronagraph, CATEcor (where CATE stands for Continental-America Telescope Eclipse), that incorporates a novel "shaded-truss" style of external occultation and serves as a proof-of-concept for that family of coronagraphs. The shaded-truss design style has the potential for broad application in various scientific settings. We conceived CATEcor itself as a simple instrument to observe the corona during the darker skies available during a partial solar eclipse, or for students or interested amateurs to detect the corona under ideal noneclipsed conditions. CATEcor is therefore optimized for simplicity and accessibility to the public. It is implemented using an existing dioptric telescope and an adapter rig that mounts in front of the objective lens, restricting the telescope aperture and providing external occultation. The adapter rig, including occulter, is fabricated using fusion deposition modeling (FDM; colloquially "3D printing"), greatly reducing cost. The structure is designed to be integrated with moderate care and may be replicated in a university or amateur setting. While CATEcor is a simple demonstration unit, the design concept, process, and trades are useful for other more sophisticated coronagraphs in the same general family, which might operate under normal daytime skies outside the annular-eclipse conditions used for CATEcor.
RESUMO
AIM: This study evaluated the efficacy of quadrantwise subgingival instrumentation (Q-SI) versus one-stage full-mouth subgingival instrumentation (FM-SI) on probing depth and periodontal pathogen reduction over a 6-month follow-up period, as well as whether baseline periodontal pathogens influenced the impact of periodontal treatment protocols on outcomes. METHODS: Patients with periodontitis were randomized to receive Q-SI (n = 43) or FM-SI (n = 45). Patients were instructed and motivated to maintain optimal oral hygiene during the treatment sessions. Clinical (probing pocket depth [PPD], clinical attachment loss [CAL], and bleeding on probing [BOP]) and periodontal pathogens were assessed at baseline and after 30, 90, and 180 days. Total bacterial load and periodontal pathogens were analysed via real-time PCR. RESULTS: At the 6-month follow-up, the median PPD decreased from 4.8 mm (interquartile range [IQR]: 4.3-5.2) to 2.6 mm (IQR: 2.3-2.9) in FM-SI patients and from 4.7 mm (IQR: 4.1-5.2) to 3.2 mm (IQR: 2.4-3.5) in Q-SI patients (p < .001). At 6 months, FM-SI was more effective at reducing the median proportions of Porphyromonas gingivalis (Pg), Aggregatibacter actinocomyctemcomitans, and Tannerella forsythia (Tf) (p < .001 for each value). Multilevel linear regression analysis demonstrated that high baseline PPD (p = .029), Pg (p = .014), and Tf (p < .001) levels and the FM-SI protocol (p < .001) were statistically significant predictors of PPD reduction at 6 months. Furthermore, PPD reduction was significantly greater in the FM-SI group when lower baseline Pg levels were detected. CONCLUSION: The FM-SI was more effective than the Q-SI in reducing the mean PPD and number of periodontal pathogens in periodontitis patients over a 6-month follow-up period. Higher baseline PPD and Pg levels had a negative impact on PPD reduction at 6 months after FM-SI.