Tuning Electrocatalytic Activities of Dealloyed Nanoporous Catalysts by Macroscopic Strain Engineering.

It is technically challenging to quantitatively apply strains to tune catalysis because most heterogeneous catalysts are nanoparticles, and lattice strains can only be applied indirectly via core-shell structures or crystal defects. Herein, we report quantitative relations between macroscopic strains and hydrogen evolution reaction (HER) activities of dealloyed nanoporous gold (NPG) by directly applying macroscopic strains upon bulk NPG. It was found that macroscopic compressive strains lead to a decrease, while macroscopic tensile strains improve the HER activity of NPG, which is in line with the d-band center model. The overpotential and onset potential of HER display approximately a linear relation with applied macroscopic strains, revealing an ∼2.9 meV decrease of the binding energy per 0.1% lattice strains from compressive to tensile. The methodology with the high strain sensitivity of electrocatalysis, developed in this study, paves a new way to investigate the insights of strain-dependent electrocatalysis with high precision.

Nanostructure Tuning of Gold Nanoparticles Films via Click Sintering.

Colloidal metal nanoparticles dispersions are commonly used to create functional printed electronic devices and they typically require time-, energy- and equipment-consuming post-treatments to improve their electrical and mechanical properties. Traditional methods, e.g. thermal, UV/IR, and microwave treatments, limit the substrate options and may require expensive equipment, not available in all the laboratories. Moreover, these processes also cause the collapse of the film (nano)pores and interstices, limiting or impeding its nanostructuration. Finding a simple approach to obtain complex nanostructured materials with minimal post-treatments remains a challenge. In this study, a new sintering method for gold nanoparticle inks that called as "click sintering" has been reported. The method uses a catalytic reaction to enhance and tune the nanostructuration of the film while sintering the metallic nanoparticles, without requiring any cumbersome post-treatment. This results in a conductive and electroactive nanoporous thin film, whose properties can be tuned by the conditions of the reaction, i.e., concentration of the reagent and time. Therefore, this study presents a novel and innovative one-step approach to simultaneously sinter gold nanoparticles films and create functional nanostructures, directly and easily, introducing a new concept of real-time treatment with possible applications in the fields of flexible electronics, biosensing, energy, and catalysis.

High-Temperature Melt Stamping of Polymers Using Polymer/Nanoporous Gold Composite Stamps.

Parallel lithographic deposition of polymers onto counterpart substrates is a widely applied surface manufacturing operation. However, polymers may only be soluble in organic solvents or are insoluble at all. Solvent evaporation during stamping may trigger hardly controllable capillarity-driven flow processes or phase separation, and polymer solutions may spread on the counterpart substrates. Solvent-free stamping of melts prevents these drawbacks. Here, a stamp design for the deposition of melts is devised, which intrinsically circumvents ink depletion. The stamps' topographically patterned contact surfaces with protruding contact elements contacting the counterpart substrates consist of a nanoporous gold layer with a thickness of a few micrometers. The nanoporous gold layer is attached to a molten polymer layer, which is support for the nanoporous gold layer and ink reservoir at the same time. The nanoporous gold layer in turn stabilizes the topography of the stamps' contact surfaces. As examples, arrays of submicron microdots of polystyrene and poly(vinylidenefluoride-trifluoroethylene) (PVDF-TrFE) are manufactured. The P(VDF-TrFE) microdots are partially crystalline, ferroelectric, and can be locally poled. It is envisioned that the methodology reported here can be automatized and may be extended to functional low-molecular-mass compounds, such as active pharmaceutical ingredients.

Unusual dark-field hyperspectral and confocal Raman microscopy features of a nanoporous gold electrode coated with porphyrazine complex.

Nanoporous gold electrodes are of great interest in electroanalytical chemistry, because of their unusual activity and large surface area. The electrochemical activity can be further improved by coating with molecular catalysts such as the tetraruthenated cobalt-tetrapyridylporphyrazines investigated in this work. The plasmonic enhancement of the scattered light at the nanoholes and borders modifies the electrode's optical characteristics, improving the transmission through the surface-enhanced Raman scattering (SERS) effect. When monitored by hyperspectral dark-field and confocal Raman microscopy, this effect allows probing of the porphyrazine species at the plasmonic nanholes, improving the understanding of the chemically modified gold electrodes.

Giant enhancement of fluorescence resonance energy transfer based on nanoporous gold with small amount of residual silver.

Fluorescence resonance energy transfer (FRET) was found strongly enhanced by plasmon resonance. In this work, Nanoporous Gold with small amount of residual silver was used to form nanoporous gold/organic molecular layer compound with PSS and PAH. The ratio of its specific gold and silver content is achieved by controlling the time of its dealloying. Layered films of polyelectrolyte multilayers were assembled between the donor-acceptor pairs and NPG films to control distance. The maximum of FRET enhancement of 80-fold on the fluorescence intensity between the donor-acceptor pairs (CFP-YFP) is observed at a distance of ∼10.5 nm from the NPG film. This Nanoporous Gold with small amount of residual silver not only enhanced FRET 4-fold more than nanoporous gold of only gold content almost, but also effectively realized the regulation of FRET enhancement. The ability to precisely measure and regulate the enhancement of FRET enables the rational selection of plasmonic nanotransducer dimensions for the particular biosensing application.

Nanoporous gold with microporous structure prepared by sodium dodecyl sulfate-mediated electrochemical dealloying.

Nanoporous gold (NPG) is a promising catalytic material for the oxidation of CO and methanol applications. However, NPGs are prone to extensive macroscopic cracking that often decrease mechanic properties of NPGs and depresses their catalytic action. To produce crack-free NPG with an ultra-finer porosity in room temperature, the anionic surfactant sodium dodecyl sulfate (SDS) was added in electrochemical dealloying process. SDS has the effect of reducing the surface diffusion of gold which hinder the initial coarsening of ligaments and prevents interior silver atoms from being exposed and dissolved. As a result, the pore and ligment size are finer, but higher residual silver of NPG samples. NPG with pore size down to 2 nm and the ligament 4.0 nm was successfully fabricated with 13.32 mM SDS in perchloric acid solution. The surface diffusion coefficient of Au atoms was 1.6 × 10-24m2·s-1, nearly 3 orders of magnitude smaller than that of Au atoms in the absence of SDS (2.8 × 10-21m2·s-1). Nanoindentation results demonstrated that high residual silver content made NPG samples harder and stiffer，the specific surface areas of NPG with 6.66 mM SDS was 190 m2g-1by BET. This work provided very important clues on how to control the crack free ultrafine nanoporous structure of other materials.

A hybrid effective medium description for nanoporous gold films and thickness-mediated control of optical absorption.

With the increasing demand for sensing platforms operating across UV, visible, and near-infrared wavelengths, nanoporous gold has emerged as an ideal substrate for rapid, quantitative detection of analytes with excellent specificity and high sensitivity. This study investigates thickness-mediated compositional changes and their impact on scattering characteristics of thin nanoporous gold films fabricated using selective chemical etching. Specifically, we observe thickness-induced morphological and structural changes across different fabricated samples from 25 to 100 nm in thickness. Upon their optical characterization across UV-VIS-NIR spectral regime, we notice that the constitutional differences among samples manifest distinctively & deterministically in their total optical scattering response. In order to gain insights into these observed scattering responses and to fathom the subtle connections between structural properties of NPG films and their optical response, a hybrid theoretical model comprising Maxwell-Garnett & Bruggeman effective medium approximations has been adopted. Our approach not only allows to appropriately account for the inhomogeneous nature of these films, but also corroborates well with the atomic force microscopy characterizations of the fabricated samples. Furthermore, tracing such a theoretical model is important as it helps in systematically ascertaining additional loss terms emerging in the complex dielectric function of films due to their nanoscale porosity & roughness, permitting a good reproduction of measured optical spectra. We believe, our approach will not only facilitate accurate regulation of losses in NPG thin films but will also aid in deriving customized optical performance from them, thereby advancing their potential applications in sensing and beyond.

Self-catalytic growth of one-dimensional materials within dislocations in gold.

Dislocations in metals affect their properties on the macro- and the microscales. For example, they increase a metal's hardness and strength. Dislocation outcrops exist on the surfaces of such metals, and atoms in the proximity of these outcrops are more loosely bonded, facilitating local chemical corrosion and reactivity. In this study, we present a unique autocatalytic mechanism by which a system of inorganic semiconducting gold(I) cyanide nanowires forms within preexisting dislocation lines in a plastically deformed Au-Ag alloy. The formation occurs during the classical selective dealloying process that forms nanoporous Au. Nucleation of the nanowire originates at the surfaces of the catalytic dislocation outcrops. The nanowires are single crystals that spontaneously undergo layer-by-layer one-dimensional growth. The continuous growth of nanowires is achieved when the dislocation density exceeds a critical value evaluated on the basis of a kinetic model that we developed.

Nanoporous Gold Thin Films as Substrates to Analyze Liquids by Cryo-atom Probe Tomography.

Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface is still an issue. Here, we propose the use of 1-2-µm-thick binary alloy film of gold-silver sputtered onto flat silicon, with sufficient adhesion without an additional layer. Through chemical dealloying, we successfully fabricate a nanoporous substrate, with an open-pore structure, which is mounted on a microarray of Si posts by lift-out in the focused-ion beam system, allowing for cryogenic fixation of liquids. We present cryo-APT results obtained after cryogenic sharpening, vacuum cryo-transfer, and analysis of pure water on the top and inside the nanoporous film. We demonstrate that this new substrate has the requisite characteristics for facilitating cryo-APT of frozen liquids, with a relatively lower volume of precious metals. This complete workflow represents an improved approach for frozen liquid analysis, from preparation of the films to the successful fixation of the liquid in the porous network, to cryo-APT.

Nanoporous Gold-Modified Screen-Printed Electrodes for the Simultaneous Determination of Pb2+ and Cu2+ in Water.

In this study, nanoporous gold (NPG) was deposited on a screen-printed carbon electrode (SPCE) by the dynamic hydrogen bubble template (DHBT) method to prepare an electrochemical sensor for the simultaneous determination of Pb2+ and Cu2+ by square wave anodic stripping voltammetry (SWASV). The electrodeposition potential and electrodeposition time for NPG/SPCE preparation were investigated thoroughly. Scanning electron microscopy (SEM) and energy-dispersive X-ray diffraction (EDX) analysis confirmed successful fabrication of the NPG-modified electrode. Electrochemical characterization exhibits its superior electron transfer ability compared with bare and nanogold-modified electrodes. After a comprehensive optimization, Pb2+ and Cu2+ were simultaneously determined with linear range of 1-100 µg/L for Pb2+ and 10-100 µg/L for Cu2+, respectively. The limits of detection were determined to be 0.4 µg/L and 5.4 µg/L for Pb2+ and Cu2+, respectively. This method offers a broad linear detection range, a low detection limit, and good reliability for heavy metal determination in drinking water. These results suggest that NPG/SPCE holds great promise in environmental and food applications.

Nanoporous Au Behavior in Methyl Orange Solutions.

Nanoporous (NP) gold, the most extensively studied and efficient NP metal, possesses exceptional properties that make it highly attractive for advanced technological applications. Notably, its remarkable catalytic properties in various significant reactions hold enormous potential. However, the exploration of its catalytic activity in the degradation of water pollutants remains limited. Nevertheless, previous research has reported the catalytic activity of NP Au in the degradation of methyl orange (MO), a toxic azo dye commonly found in water. This study aims to investigate the behavior of nanoporous gold in MO solutions using UV-Vis absorption spectroscopy and high-performance liquid chromatography. The NP Au was prepared by chemical removal of silver atoms of an AuAg precursor alloy prepared by ball milling. Immersion tests were conducted on both pellets and powders of NP Au, followed by examination of the residual solutions. Additionally, X-ray photoelectron spectroscopy and electrochemical impedance measurements were employed to analyze NP Au after the tests. The findings reveal that the predominant and faster process involves the partially reversible adsorption of MO onto NP Au, while the catalytic degradation of the dye plays a secondary and slower role in this system.

Rapid Detection of the Anti-Tumor Drug Etoposide in Biological Samples by Using a Nanoporous-Gold-Based Electrochemical Sensor.

Monitoring etoposide is important due to its wide usage in anti-tumor therapy; however, the commonly used HPLC method is expensive and often requires complicated extraction and detection procedures. Electrochemical analysis has great application prospects because of its rapid response and high specificity, sensitivity, and efficiency with low cost and high convenience. In this study, we constructed a nanoporous gold (NPG)-modified GCE for the detection of etoposide. The electrochemical oxidation of etoposide by NPG caused a sensitive current peak at +0.27 V with good reproductivity in 50 mM of phosphate buffer (pH 7.4). The relationship between etoposide concentration and peak current was linear in the range between 0.1 and 20 µM and between 20 and 150 µM, with a detection sensitivity of 681.8 µA mM-1 cm-2 and 197.2 µA mM-1 cm-2, respectively, and a limit of detection (LOD) reaching 20 nM. The electrode had a good anti-interference ability to several common anions and cations. Spiked recovery tests in serum, urine, and fermentation broth verified the excellent performance of the sensor in terms of sensitivity, reproducibility, and specificity. This may provide a promising tool for the detection of etoposide in biological samples.

Facet-Dependent Formation and Adhesion of Au Oxide and Nanoporous Au on Poly-Oriented Au Single Crystals.

Nanoporous Au (NPG) has different properties compared to bulk Au, making it an interesting material for numerous applications. To modify the structure of NPG films for specific applications, e. g., the porosity, thickness, and homogeneity of the films, a fundamental understanding of the structure formation is essential. Here, we focus on NPG prepared via electrochemical reduction from Au oxide formed during high voltage (HV) electrolysis on poly-oriented Au single crystal (Au POSC) electrodes. These POSCs consist of a metal bead, with faces with different crystallographic orientations and allow screening of the influence of crystallographic orientation on the structure formation for different facets in one experiment. The HV electrolysis is performed between 100 ms and 30 s at 300 V and 540 V. The amount of Au oxide formed is determined by electrochemical measurements and the structural properties are investigated by scanning electron and optical microscopy. We show that the formation of Au oxide is mostly independent of the crystallographic orientation, except for thick layers, while the macroscopic structure of the NPG films depends on experimental parameters such as the Au oxide precursor thickness and the crystallographic orientation of the substrate. Possible reasons for the frequently observed exfoliation of the NPG films are discussed.

Nanoporous Au Formation on Au Substrates via High Voltage Electrolysis.

Nanoporous Au (NPG) films have promising properties, making them suitable for various applications in (electro)catalysis or (bio)sensing. Tuning the structural properties, such as the pore size or the surface-to-volume ratio, often requires complex starting materials such as alloys, multiple synthesis steps, lengthy preparation procedures or a combination of these factors. Here we present an approach that circumvents these difficulties, enabling for a rapid and controlled preparation of NPG films starting from a bare Au electrode. In a first approach a Au oxide film is prepared by high voltage (HV) electrolysis in a KOH solution, which is then reduced either electrochemically or in the presence of H2 O2 . The resulting NPG structures and their electrochemically active surface areas strongly depend on the reduction procedure, the concentration and temperature of the H2 O2 -containing KOH solution, as well as the applied voltage and temperature during HV electrolysis. Secondly, the NPG film can be prepared directly by applying voltages that result in anodic contact glow discharge electrolysis (aCGDE). By carefully adjusting the corresponding parameters, the surface area of the final NPG film can be specifically controlled. The structural properties of the electrodes are investigated by means of XPS, SEM and electrochemical methods.

A nanoporous gold film sensor modified with polypyrrole/CuO nanocomposite for electrochemical determination of piroxicam and tramadole.

In this paper, an electrochemical sensor was developed to determine piroxicam (PX) and tramadole (Tr) based on their enhanced electrochemical responses at the surface of the polypyrrole/CuO nanocomposite-modified nanoporous gold film (NPGF) electrode. The experimental results showed that PX provide an oxidation peak at 0.65 V in pH = 8.0. The DPV results were linearly affiliated on PX concentration within the two closed windows (C1PX = 0.05-30.0 µM, correlation coefficient of 0.9905, and C2PX = 50.0-300.0 µM, correlation coefficient of 0.9927). From voltammetric curves, the detection limit (LOD = 3Sb/m) for PX at a surface of PPY-CuO-NPGF electrode was appeared to be 0.01 µM. Furthermore, the ability of PPY-CuO-NPGF electrode for simultaneous measurement of PX and Tr was investigated. The suggested sensor shows a long-time stability, good repeatability, and rapid response in the mixture media of PX and Tr.

Unusual effects of a nanoporous gold substrate on cell adhesion and differentiation because of independent multi-branch signaling of focal adhesions.

A variety of cell behaviors, such as cell adhesion, motility, and fate, can be controlled by substrate characteristics such as surface topology and chemistry. In particular, the surface topology of substrates strongly affects cell behaviors, and the topological spacing is a critical factor in inducing cell responses. Various works have demonstrated that cell adhesion was enhanced with decreasing topological spacing although differentiation progressed slowly. However, there are exceptions, and thus, correlations between topological spacing and cell responses are still debated. We show that a nanoporous gold substrate affected cell adhesion while it neither affected osteogenic nor adipogenic differentiation. In addition, the cell adhesion was reduced with decreasing pore size. These do not agree with previous findings. A focal adhesion (FA) is an aggregate of modules comprising specific proteins such as FA kinase, talin, and vinculin. Therefore, it is suggested that because various extracellular signals can be independently branched off from the FA modules, the unusual effects of nanoporous gold substrates are related to the multi-branching of FAs.

Nanoporous Gold Ring-Integrated Photothermal Intraocular Lens for Active Prevention of Posterior Capsular Opacification.

Posterior capsular opacification (PCO) is the leading complication after cataract surgery, and is mainly induced by the proliferation and migration of residual lens epithelial cells (LECs). Although numerous attempts have been made to reduce the incidence of PCO, this complication remains a critical challenge in postoperative visual recovery. This study aims to report a functionalized intraocular lens (R-IOL) with a region-confined photothermal effect for the active prevention of PCO after implantation. The outer rim of R-IOL (non-optical area) is decorated with a nanoporous gold (NPG) ring, which can effectively eliminate the LECs around R-IOL, ultimately inhibiting the migration of LECs from the periphery to the visual axis center in the initial stage, and preventing the subsequent PCO. Furthermore, the mechanism of LECs elimination can be attributed to apoptosis induced by mild photothermal therapy. After in vivo implantation for 30 days, PCO is rarely observed in the R-IOL group, whereas the considerably higher incidence of PCO (75%) is found in the pristine IOL (P-IOL) group. The region-confined photothermal effect based on NPG not only provides an active strategy to effectively prevent PCO, but also introduces new opportunities for the treatment of undesirable hyperplasia.

Microneedle-based nanoporous gold electrochemical sensor for real-time catecholamine detection.

Dopamine (DA), epinephrine (EP), and norepinephrine (NEP) are the main catecholamine of clinical interest, as they play crucial roles in the regulation of nervous and cardiovascular systems and are involved in some brain behaviors, such as stress, panic, anxiety, and depression. Therefore, there is an urgent need for a reliable sensing device able to provide their continuous monitoring in a minimally invasive manner. In this work, the first highly nanoporous gold (h-nPG) microneedle-based sensor is presented for continuous monitoring of catecholamine in interstitial fluid (ISF). The h-nPG microneedle-based gold electrode was prepared by a simple electrochemical self-templating method that involves two steps, gold electrodeposition and hydrogen bubbling at the electrode surface, realized by sweeping the potential between + 0.8 V and 0 V vs Ag/AgCl for 25 scans in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, and successively applying a fixed potential of - 2 V vs Ag/AgCl for 60 s. The resulting microneedle-based h-nPG sensor displays an interference-free total catecholamine detection expressed as NEP concentration, with a very low LOD of 100 nM, excellent sensitivity and stability, and fast response time (< 4 s). The performance of the h-nPG microneedle array sensor was successively assessed in artificial ISF and in a hydrogel skin model at typical physiological concentrations.

Nanoporous Gold for Energy Applications.

Research activities using nanoporous gold (NPG) were reviewed in the field of energy applications in three categories: fuel cells, supercapacitors, and batteries. First, applications to fuel cells are reviewed with the subsections of proof-of-concept studies, studies on fuel oxidations at anode, and studies on oxygen reduction reactions at cathode. Second, applications to supercapacitors are reviewed from research activities on active materials/NPG composites to demonstrations of all-solid-state flexible supercapacitors using NPG electrodes. Third, research activities using NPG for battery applications are reviewed, mainly about fundamental studies on Li-air and Na-air batteries and some model studies on improving Li ion battery anodes. Although NPG based studies are the main subject of this review, some of meaningful studies using nanoporous metals are also discussed where relevant. Finally, summary and future outlook are given based on the survey on the research activities.

A versatile heterogeneous photocatalyst: nanoporous gold powder modified with a zinc(II) phthalocyanine derivative for singlet oxygen [4 + 2] cycloadditions.

Nanoporous gold was functionalized with a photosensitizer, a zinc(II) phthalocyanine derivative. Such systems are active for the generation of reactive singlet oxygen which can be used for photocatalytic oxidation reactions. This study aims to demonstrate the versatility of such an approach, in terms of substrates and the employed solvent, only possible for a truly heterogeneous catalytic system. The activity of the hybrid system was studied for [4 + 2] cycloadditions of three different types of dienes and a total of eight substrates in two organic solvents and once in water. The highest activity was measured for 1,3-diphenylisobenzofuran, which is also highest in terms of sensitivity for the reaction with 1O2. Trends in conversion could be anticipated based on reported values for the rate constant for the reaction of 1O2. In almost all cases, an amplification of the conversion by immobilization of the sensitizer onto nanoporous gold was observed. The limiting case was ergosterol, which was the largest of all substrates with a van-der-Waals radius of about 2.1 nm. Additional factors such as the limited lifetime of 1O2 in different solvents as well as the hampered diffusion of the substrates were identified.