Peroxiredoxin 1 modulates oxidative stress resistance and cell apoptosis through stemness in liver cancer under non-thermal plasma treatment.

The role of peroxiredoxin 1 (PRDX1), a crucial enzyme that reduces reactive oxygen and nitrogen species levels in HepG2 human hepatocellular carcinoma (HCC) cells, in the regulation of HCC cell stemness under oxidative stress and the underlying mechanisms remain largely unexplored. Here, we investigated the therapeutic potential of non-thermal plasma in targeting cancer stem cells (CSCs) in HCC, focusing on the mechanisms of resistance to oxidative stress and the role of PRDX1. By simulating oxidative stress conditions using the plasma-activated medium, we found that a reduction in PRDX1 levels resulted in a considerable increase in HepG2 cell apoptosis, suggesting that PRDX1 plays a key role in oxidative stress defense mechanisms in CSCs. Furthermore, we found that HepG2 cells had higher spheroid formation capability and increased levels of stem cell markers (CD133, c-Myc, and OCT-4), indicating strong stemness. Interestingly, PRDX1 expression was notably higher in HepG2 cells than in other HCC cell types such as Hep3B and Huh7 cells, whereas the expression levels of other PRDX family proteins (PRDX 2-6) were relatively consistent. The inhibition of PRDX1 expression and peroxidase activity by conoidin A resulted in markedly reduced stemness traits and increased cell death rate. Furthermore, in a xenograft mouse model, PRDX1 downregulation considerably inhibited the formation of solid tumors after plasma-activated medium (PAM) treatment. These findings underscore the critical role of PRDX 1 in regulating stemness and apoptosis in HCC cells under oxidative stress, highlighting PRDX1 as a promising therapeutic target for NTP-based treatment in HCC.

Non-thermal plasma (NTP) treatment of Trigonella foenum-graecum L. seeds stimulates the sprout growth and the production of nutraceutical compounds.

The possibility to stimulate the production of some nutraceutical properties of fenugreek (Trigonella foenum-graecum L.) sprouts by non-thermal plasma (NTP) processing of the seeds in different conditions was studied. The non-thermal plasma used in this work was a surface dielectric barrier discharge. Two types of processing were performed: direct NTP treatment and NTP with a cover treatment, to simulate the processing of packaged seeds. For all treatments, the effect of pre-soaking of the seeds was studied as well. The analyses of the seeds after processing indicated an increase of the hydrophilicity of their surface for NTP direct treatment as resulted from the water contact angle measurements, which could be due to the strong etching evidenced by scanning electron microscopy imaging. A significant (p < 0.05) increase of the seedling growth, by up to 50%, was found especially for the pre-soaked seeds. These results were correlated with the increase of chlorophyll pigments concentrations, with higher concentrations in the case of NTP direct treatment than for the NTP with cover treatments. Direct NTP treatment for 30 s of dry seeds led to the highest increase of the flavonoid concentration of about three times compared to that obtained for untreated seeds. For the polyphenols and antioxidant activity, NTP with cover treatments proved to be better, with a significant increase, especially for 90 s treatment of the pre-soaked seeds. All the results indicate the possibility of tuning the nutraceutical properties of fenugreek sprouts by NTP treatment.

Effect of Non-Thermal Sulfur Hexafluoride Cold Plasma Modification on Surface Properties of Polyoxymethylene.

X-ray photoelectron spectroscopy was employed to reveal the differences in the chemical structure of the topmost layer after plasma modification. It was found out that changes in the surface properties of the polymer could be observed even after 20 seconds of treatment. The surface becomes hydrophobic or superhydrophobic, with the water contact angles up to 160 degrees. Morphological changes and increased roughness can be observed only in the nanoscale, whereas the structure seems to be unaffected in the microscale. As a result of plasma modification a permanent hydrophobic effect was obtained on the polyoxymethylene surface.

Synergism of non-thermal plasma and low concentration RSL3 triggers ferroptosis via promoting xCT lysosomal degradation through ROS/AMPK/mTOR axis in lung cancer cells.

BACKGROUND: Though (1S, 3R)-RSL3 has been used widely in basic research as a small molecular inducer of ferroptosis, the toxicity on normal cells and poor pharmacokinetic properties of RSL3 limited its clinical application. Here, we investigated the synergism of non-thermal plasma (NTP) and low-concentration RSL3 and attempted to rise the sensitivity of NSCLC cells on RSL3. METHODS: CCK-8 assay was employed to detect the change of cell viability. Microscopy and flowcytometry were applied to identify lipid peroxidation, cell death and reactive oxygen species (ROS) level respectively. The molecular mechanism was inspected with western blot and RT-qPCR. A xenograft mice model was adopted to investigate the effect of NTP and RSL3. RESULTS: We found the synergism of NTP and low-concentration RSL3 triggered severe mitochondria damage, more cell death and rapid ferroptosis occurrence in vitro and in vivo. NTP and RSL3 synergistically induced xCT lysosomal degradation through ROS/AMPK/mTOR signaling. Furthermore, we revealed mitochondrial ROS was the main executor for ferroptosis induced by the combined treatment. CONCLUSION: Our research shows NTP treatment promoted the toxic effect of RSL3 by inducing more ferroptosis rapidly and provided possibility of RSL3 clinical application.

Skin treatment with non-thermal plasma modulates the immune system through miR-223-3p and its target genes.

Non-thermal plasma, a partially ionized gas, holds significant potential for clinical applications, including wound-healing support, oral therapies, and anti-tumour treatments. While its applications showed promising outcomes, the underlying molecular mechanisms remain incompletely understood. We thus apply non-thermal plasma to mouse auricular skin and conducted non-coding RNA sequencing, as well as single-cell blood sequencing. In a time-series analysis (five timepoints spanning 2 hours), we compare the expression of microRNAs in the plasma-treated left ears to the unexposed right ears of the same mice as well as to the ears of unexposed control mice. Our findings indicate specific effects in the treated ears for a set of five miRNAs: mmu-miR-144-5p, mmu-miR-144-3p, mmu-miR-142a-5p, mmu-miR-223-3p, and mmu-miR-451a. Interestingly, mmu-miR-223-3p also exhibits an increase over time in the right non-treated ear of the exposed mice, suggesting systemic effects. Notably, this miRNA, along with mmu-miR-142a-5p and mmu-miR-144-3p, regulates genes and pathways associated with wound healing and tissue regeneration (namely ErbB, FoxO, Hippo, and PI3K-Akt signalling). This co-regulation is particularly remarkable considering the significant seed dissimilarities among the miRNAs. Finally, single-cell sequencing of PBMCs reveals the downregulation of 12 from 15 target genes in B-cells, Cd4+ and Cd8+ T-cells. Collectively, our data provide evidence for a systemic effect of non-thermal plasma.

Acquired non-thermal plasma resistance mediates a shift towards aerobic glycolysis and ferroptotic cell death in melanoma.

AIMS: To gain insights into the underlying mechanisms of NTP therapy sensitivity and resistance, using the first-ever NTP-resistant cell line derived from sensitive melanoma cells (A375). METHODS: Melanoma cells were exposed to NTP and re-cultured for 12 consecutive weeks before evaluation against the parental control cells. Whole transcriptome sequencing analysis was performed to identify differentially expressed genes and enriched molecular pathways. Glucose uptake, extracellular lactate, media acidification, and mitochondrial respiration was analyzed to determine metabolic changes. Cell death inhibitors were used to assess the NTP-induced cell death mechanisms, and apoptosis and ferroptosis was further validated via Annexin V, Caspase 3/7, and lipid peroxidation analysis. RESULTS: Cells continuously exposed to NTP became 10 times more resistant to NTP compared to the parental cell line of the same passage, based on their half-maximal inhibitory concentration (IC50). Sequencing and metabolic analysis indicated that NTP-resistant cells had a preference towards aerobic glycolysis, while cell death analysis revealed that NTP-resistant cells exhibited less apoptosis but were more vulnerable to lipid peroxidation and ferroptosis. CONCLUSIONS: A preference towards aerobic glycolysis and ferroptotic cell death are key physiological changes in NTP-resistance cells, which opens new avenues for further, in-depth research into other cancer types.

Study of plasma activated water effect on heavy metal bioaccumulation by Cannabis sativa Using Laser-Induced Breakdown Spectroscopy.

Contamination of the environment with toxic metals such as cadmium or lead is a worldwide issue. The accumulator of metals Cannabis sativa L. has potential to be utilized in phytoremediation, which is an environmentally friendly way of soil decontamination. Novel non-thermal plasma-based technologies may be a helpful tool in this process. Plasma activated water (PAW), prepared by contact of gaseous plasma with water, contains reactive oxygen and nitrogen species, which enhance the growth of plants. In this study, C. sativa was grown in a short-term toxicity test in a medium which consisted of plasma activated water prepared by dielectric barrier discharge with liquid electrode and different concentrations of cadmium or lead. Application of PAW on heavy metal contaminated C. sativa resulted in increased growth under Pb contamination as was determined by ecotoxicology tests. Furthermore, the PAW influence on the bioaccumulation of these metals as well as the influence on the nutrient composition of plants was studied primarily by applying Laser-induced breakdown spectroscopy (LIBS). The LIBS elemental maps show that C. sativa accumulates heavy metals mainly in the roots. The results present a new proof-of-concept in which PAW could be used to improve the growth of plants in heavy metal contaminated environment, while LIBS can be implemented to study the phytoremediation efficiency.

Non-Thermal Plasma Reduces HSV-1 Infection of and Replication in HaCaT Keratinocytes In Vitro.

Herpes simplex virus type 1 (HSV-1) is a lifelong pathogen characterized by asymptomatic latent infection in the trigeminal ganglia (TG), with periodic outbreaks of cold sores caused by virus reactivation in the TG and subsequent replication in the oral mucosa. While antiviral therapies can provide relief from cold sores, they are unable to eliminate HSV-1. We provide experimental results that highlight non-thermal plasma (NTP) as a new alternative therapy for HSV-1 infection that would resolve cold sores faster and reduce the establishment of latent infection in the TG. Additionally, this study is the first to explore the use of NTP as a therapy that can both treat and prevent human viral infections. The antiviral effect of NTP was investigated using an in vitro model of HSV-1 epithelial infection that involved the application of NTP from two separate devices to cell-free HSV-1, HSV-1-infected cells, and uninfected cells. It was found that NTP reduced the infectivity of cell-free HSV-1, reduced viral replication in HSV-1-infected cells, and diminished the susceptibility of uninfected cells to HSV-1 infection. This triad of antiviral mechanisms of action suggests the potential of NTP as a therapeutic agent effective against HSV-1 infection.

Design of double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst via starch-templated microwave-combustion hybrid precipitation method and modified with corona-plasma: Remediation of dye contaminants.

Herein, the novel double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst with nanosphere-on-nanosheet-like morphology was synthesized via the corona-plasma-assisted starch-templated microwave-combustion-precipitation method to remove the dye pollutants. The CuO-CuFe2O4 meso/macroporous nanophotocatalyst was synthesized using a one-pot-stage combustion-microwave process with/without starch as a hard-template. Subsequently, surface modification was carried out by DC corona-plasma discharge technology at various voltages, namely 500, 1000 and 1500 V. Then, the Ag3O4 photocatalyst was deposited on the CuO-CuFe2O4 fabricated with starch-hard-template and treated with 1000 V corona-plasma (denoted as: Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P). The properties of the synthesized nanophotocatalysts were analyzed using various techniques, including X-ray diffraction (XRD), Diffuse reflectance spectroscopy (DRS), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller and Barrett-Joyner-Halenda (BET-BJH), Vibrating Sample Manetometer (VSM), and Photoluminescence (PL). The XRD analysis corroborated the presence of CuO, CuFe2O4 and Ag3O4 in the structure of all samples. The BET-BJH analysis indicates that the specific surface area of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst as the best sample is 2 m2/g, higher than other samples. Additionally, the DRS analysis revealed that the band gap of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst is about 1.68 eV with the surface plasmon resonance. The performance of the ternary heterostructured Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst was 96.2% and 89.1% in the degradation of the crystal violet (10 mg/L) and acid orange 7 (10 mg/L), respectively, proving its outstanding degradation capacity.

Atmospheric pressure dielectric barrier discharge plasma for in-situ water treatment using a bubbling reactor.

Non-thermal plasma has been an emerging technology for water treatment for decades. In this study, we have designed and fabricated a bubbling plasma batch reactor using an atmospheric pressure dielectric barrier discharge with a hydrophobic porous membrane. The reactor performance is assessed for purifying synthetic contaminated water samples containing chemical contaminant sulfamethoxazole (SMX), a widely used antibiotic, and biological contaminant E. coli K12. The SMX decontamination tests indicate that the degradation process is not first-order and the reaction rate dwindle with increasing initial concentration. The yield at 50% removal achieves its highest value of 8.12 g/kWh for 50 mg/L SMX sample. For inactivation of E. coli K12 tests, the inactivation process is also not first-order, and the pathogen is completely inactivated for 102 CFU/mL and 104 CFU/mL cases after 10 min and 45 min of plasma treatment, respectively. For the 108 CFU/mL sample, a 5-log reduction is achieved after 60 min of treatment. The developed plasma reactor can achieve fast deployment in point of use, low cost for manufacturing, and simple for maintenance. Moreover, it can be used for in-situ water purification in future long duration crewed space missions as well as tackling with water pollution issues on our planet.

Comparative life cycle assessment of non-thermal plasma for the removal of pharmaceuticals from wastewater.

Wastewater effluents are a continuous source of pharmaceuticals in water bodies, which pose a serious environmental threat to aquatic ecosystems. This work provides a comprehensive technical, environmental and cost assessments of different advanced quaternary treatments for wastewater effluents, with special focus on novel Non-Thermal Plasma technology. For this porpouse Non-Thermal Plasma, Sand Filtration + Ozonation, Ultrafiltration, Ultrafiltration + Nanofiltration and Ultrafiltration + Reverse Osmosis technologies were compared with UV disinfection-based technology. This work applies the Life Cycle Analysis tool for the impact environmental assessment using both ReciPE 2016(H) method and, for a more detailed analysis of the contribution of pharmaceuticals to freshwater ecotoxicity category of impact, the USETOX method, which was integrated with 7 new characterisation factors. The results obtained showed overall removal efficiency of pharmaceuticals always higher than 80%, with performances in descending order of Ultrafiltration + Reverse Osmosis > Sand Filtration + Ozonation > Ultrafiltration + Nanofiltration > Non-Thermal Plasma, being Sand Filtration + Ultraviolet disinfection and standalone Ultrafiltration comparatively not suitable for pharmaceuticals removal. Regarding the target pharmaceuticals proposed on the EU Directive 271/91 revision, the Non-Thermal Plasma perform better towards venlafaxine than Sand Filtration + Ozonation, and towards diclofenac and carbamazepine than Ultrafiltration + Nanofiltration. Ultrafiltration + Nanofiltration and Non-Thermal Plasma showed better environmental performance than Sand Filtration + Ozonation and Ultrafiltration + Reverse Osmosis in 7 out of 18 categories of impact (ReciPe method), with Ultrafiltration + Nanofiltration being more advantageous than Non-Thermal Plasma in human and ecotoxicity-related categories of impact, and Non-Thermal Plasma more advantageous in Global Warming, Fossil Resource Scarcity, and Fine Particulate Matter Formation. Regrading Freshwater Ecotoxicity (USEtox method), the quaternary treatment configuration and its energy demand affect the Freshwater final value of impact more than the presence of pharmaceuticals. Under the conditions tested, the Non-Thermal Plasma provided the lower OPEX (0.24 € m-3) than other tested technologies, showing an interesting compromise between pharmaceuticals removal efficiency, environmental impacts, and economic operational cost.

The Potential of Cold Atmospheric Pressure Plasmas for the Direct Degradation of Organic Pollutants Derived from the Food Production Industry.

Specialized chemicals are used for intensifying food production, including boosting meat and crop yields. Among the applied formulations, antibiotics and pesticides pose a severe threat to the natural balance of the ecosystem, as they either contribute to the development of multidrug resistance among pathogens or exhibit ecotoxic and mutagenic actions of a persistent character. Recently, cold atmospheric pressure plasmas (CAPPs) have emerged as promising technologies for degradation of these organic pollutants. CAPP-based technologies show eco-friendliness and potency for the removal of organic pollutants of diverse chemical formulas and different modes of action. For this reason, various types of CAPP-based systems are presented in this review and assessed in terms of their constructions, types of discharges, operating parameters, and efficiencies in the degradation of antibiotics and persistent organic pollutants. Additionally, the key role of reactive oxygen and nitrogen species (RONS) is highlighted. Moreover, optimization of the CAPP operating parameters seems crucial to effectively remove contaminants. Finally, the CAPP-related paths and technologies are further considered in terms of biological and environmental effects associated with the treatments, including changes in antibacterial properties and toxicity of the exposed solutions, as well as the potential of the CAPP-based strategies for limiting the spread of multidrug resistance.

Degradation of o-dichlorobenzene by DBD-NTP co-modified titanium gel catalyst.

In order to study the degradation process of dioxins in industrial flue gas, the decomposition of o-dichlorobenzene (o-DCB) in a DBD plasma catalytic reactor was investigated. The results showed that an NTP-catalyzed system, especially using the CuMnTiOx catalyst, had better o-DCB degradation performance compared to plasma alone. The combination of the CuMnTiOx catalyst with NTP can achieve a degradation efficiency of up to 97.2% for o-DCB; the selectivity of CO and CO2 and the carbon balance were 40%, 45%, and 85%, respectively. The dielectric constant and electrical property results indicated that the surface discharge capacity of the catalysts played a major role in the degradation of o-DCB, and a higher dielectric constant could suppress the plasma expansion and enhance the duration of the plasma discharge per discharge cycle. According to the O1s XPS and O2-TPD results, the conversion of CO to CO2 follows the M-v-K mechanism; thus, the active species on the catalyst surface play an important role. Moreover, the CuMnTiOx and NTP mixed system exhibited excellent stability, which is probably because Cu doping improved the lifetime of the catalyst. This work can provide an experimental and theoretical basis for research in the degradation of o-DCB by plasma catalyst systems.

Cold Plasma for Green Advanced Reduction/Oxidation Processes (AROPs) of Organic Pollutants in Water.

Cold plasma is gaining increasing attention as a novel tool to activate energy demanding chemical processes, including advanced reduction/oxidation processes (AROPs) of organic pollutants in water. The very complex milieu generated by discharges at the water/plasma interface comprises photons, strong oxidants and strong reductants which can be exploited for achieving the degradation of most any kind of pollutants. Despite the complexity of these systems, the powerful arsenal of mechanistic tools and chemical probes of physical organic chemists can be usefully applied to understand and develop plasma chemistry. Specifically, the added value of air plasma generated by in situ discharge with respect to ozonation (ex situ discharge) is demonstrated using phenol and various phenol derivatives and mechanistic evidence for the prevailing role of hydroxyl radicals in the initial attack is presented. On the reduction front, the impressive performance of cold plasma in inducing the degradation of recalcitrant perfluoroalkyl substances, which do not react with OH radicals but are attacked by electrons, is reported and discussed. The widely different reactivities of perfluorooctanoic acid (PFOA) and of perfluorobutanoic acid (PFBA) underline the crucial role played in these processes by the interface between plasma and solution and the surfactant properties of the treated pollutants.

Non-thermal emerging technologies as alternatives to chemical additives to improve the quality of wheat flour for breadmaking: a review.

Wheat flour is the main ingredient used in the preparation of bread. Factors such as low gluten content and the addition of nontraditional ingredients in baking affect the quality of wheat flour and may limit its use in baking. With the increasing trend of "clean label" products, it may be interesting to develop and use physical processes to improve the quality of wheat flour and avoid the use of chemical additives. High hydrostatic pressure, non-thermal plasma, ultrasound, ozonation, ultraviolet light, and pulsed light treatments are non-thermal emerging technologies (NTETs) that have been studied for this purpose. They were originally developed to inactivate microorganisms and enzymes in foods. Additionally, these technologies can be used at low temperatures to modify the most important component of wheat flour, i.e., gluten and its fractions, which are responsible for the rheological properties of wheat flour dough. Thus, this review focuses on the effects of these NTETs by considering the following factors: (1) the technological properties of gluten, (2) gluten-starch interactions, (3) possible effects of NTETs on minor components of flours, and (4) the quality of wheat flour and the resulting final products.

Catalytically enhanced direct degradation of nitro-based antibacterial agents using dielectric barrier discharge cold atmospheric pressure plasma and rhenium nanoparticles.

The common utilization of antimicrobial agents in medicine and veterinary creates serious problems with multidrug resistance spreading among pathogens. Bearing this in mind, wastewaters have to be completely purified from antimicrobial agents. In this context, a dielectric barrier discharge cold atmospheric pressure plasma (DBD-CAPP) system was used in the present study as a multifunctional tool for the deactivation of nitro-based pharmacuticals such as furazolidone (FRz) and chloramphenicol (ChRP) in solutions. A direct approach was applied to this by treating solutions of the studied drugs by DBD-CAPP in the presence of the ReO4- ions. It was found that Reactive Oxygen Species (ROS) and Reactive Nitrogen Species (RNS), generated in the DBD-CAPP-treated liquid, played a dual role in the process. On the one hand, ROS and RNS led to the direct degradation of FRz and ChRP, and on the other hand, they enabled the production of Re nanoparticles (ReNPs). The produced in this manner ReNPs consisted of catalytically active Re+4, Re+6, and Re+7 species which allowed the reduction of -NO2 groups contained in the FRz and ChRP. Unlike the DBD-CAPP, the catalytically enhanced DBD-CAPP led to almost FRz and ChRP removals from studied solutions. The catalytic boost was particularly highlighted when catalyst/DBD-CAPP was operated in the synthetic waste matrix. Re-active sites in this scenario led to the facilitated deactivation of antibiotics, achieving significantly higher FRz and ChRP removals than DBD-CAPP on its own.

Split-face comparison of hydroquinone 4% plus nitrogen plasma vs. hydroquinone 4% alone in the treatment of melasma.

Treatment of skin diseases is important yet challenging. One of the most common skin diseases in women is melasma, which features acquired facial hyperpigmentation. We studied the effect of cold atmospheric nitrogen plasma on this disease. To characterize the nitrogen plasma, we obtained the relative intensity of the species and the plasma temperature and skin temperature during processing at different input powers and gas flows. Patients complaining of melasma were treated with hydroquinone on both sides of the face, and one side was randomly selected for additional nitrogen plasma therapy. Eight treatment sessions of plasma processing were provided 1 week apart, and one follow-up session was scheduled 1 month after the end of treatment. The rate of improvement was scored by a dermatologist in the eighth session and 1 month following the last session using the modified Melasma Area Severity Index (mMASI). Skin biomechanical characteristics such as melanin, cutaneous resonance running time (CRRT), transepidermal water loss (TEWL), and hydration were measured at baseline and during the fourth, eighth, and follow-up sessions. On both sides, we observed a significant decrease in both CRRT and melanin (P < 0.05). TEWL did not change on both sides, while hydration decreased significantly only on the side to which hydroquinone was applied in isolation (P < 0.05). According to clinical scores, on both sides, we had significant improvement. On the side that plasma was not applied, the percentage reduction of pigmentation (mMASI) in the eighth and follow-up sessions in comparison with the baseline was 5.49 ± 8.50% and 33.04 ± 9.17%, respectively, while on the other side, these figures were 20.57 ± 6.64% and 48.11 ± 11%. For melanin, these figures were 13.84 ± 4.84% and 18.23 ± 7.10% on the hydroquinone side and 21.56 ± 3.13% and 23.93 ± 3.02% on the other side. According to these results, nitrogen plasma can safely complement topical hydroquinone to improve clinical outcomes when treating melasma without causing stratum corneum damage or skin discomfort, though confirmatory studies are needed.

Persistence of Coronavirus on Surface Materials and Its Control Measures Using Nonthermal Plasma and Other Agents.

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has been responsible for the initiation of the global pandemic since 2020. The virus spreads through contaminated air particles, fomite, and surface-contaminated porous (i.e., paper, wood, and masks) and non-porous (i.e., plastic, stainless steel, and glass) materials. The persistence of viruses on materials depends on porosity, adsorption, evaporation, isoelectric point, and environmental conditions, such as temperature, pH, and relative humidity. Disinfection techniques are crucial for preventing viral contamination on animated and inanimate surfaces. Currently, there are few effective methodologies for preventing SARS-CoV-2 and other coronaviruses without any side effects. Before infection can occur, measures must be taken to prevent the persistence of the coronavirus on the surfaces of both porous and non-porous inanimate materials. This review focuses on coronavirus persistence in surface materials (inanimate) and control measures. Viruses are inactivated through chemical and physical methods; the chemical methods particularly include alcohol, chlorine, and peroxide, whereas temperature, pH, humidity, ultraviolet irradiation (UV), gamma radiation, X-rays, ozone, and non-thermal, plasma-generated reactive oxygen and nitrogen species (RONS) are physical methods.

Non-Thermal Plasma Application in Medicine-Focus on Reactive Species Involvement.

Non-thermal plasma (NTP) application in medicine is a dynamically developing interdisciplinary field. Despite the fact that basics of the plasma phenomenon have been known since the 19th century, growing scientific attention has been paid in recent years to the use of plasma in medicine. Three most important plasma-based effects are pivotal for medical applications: (i) inactivation of a broad spectrum of microorganisms, (ii) stimulation of cell proliferation and angiogenesis with lower plasma treatment intensity, and (iii) inactivation of cells by initialization of cell death with higher plasma intensity. In this review, we explain the underlying chemical processes and reactive species involvement during NTP in human (or animal) tissues, as well as in bacteria inactivation, which leads to sterilization and indirectly supports wound healing. In addition, plasma-mediated modifications of medical surfaces, such as surgical instruments or implants, are described. This review focuses on the existing knowledge on NTP-based in vitro and in vivo studies and highlights potential opportunities for the development of novel therapeutic methods. A full understanding of the NTP mechanisms of action is urgently needed for the further development of modern plasma-based medicine.

Green Hydrogen Production through Ammonia Decomposition Using Non-Thermal Plasma.

Liquid hydrogen carriers will soon play a significant role in transporting energy. The key factors that are considered when assessing the applicability of ammonia cracking in large-scale projects are as follows: high energy density, easy storage and distribution, the simplicity of the overall process, and a low or zero-carbon footprint. Thermal systems used for recovering H2 from ammonia require a reaction unit and catalyst that operates at a high temperature (550-800 °C) for the complete conversion of ammonia, which has a negative effect on the economics of the process. A non-thermal plasma (NTP) solution is the answer to this problem. Ammonia becomes a reliable hydrogen carrier and, in combination with NTP, offers the high conversion of the dehydrogenation process at a relatively low temperature so that zero-carbon pure hydrogen can be transported over long distances. This paper provides a critical overview of ammonia decomposition systems that focus on non-thermal methods, especially under plasma conditions. The review shows that the process has various positive aspects and is an innovative process that has only been reported to a limited extent.