RESUMO
This work aims at a broad overview of the results obtained with metal-sulfide materials in the field of chemoresistive gas sensing. Indeed, despite the well-known electrical, optical, structural and morphological features previously described in the literature, metal sulfides present lack of investigation for gas sensing applications, a field in which the metal oxides still maintain a leading role owing to their high sensitivity, low cost, small dimensions and simple integration, in spite of the wide assortment of sensing materials. However, despite their great advantages, metal oxides have shown significant drawbacks, which have led to the search for new materials for gas sensing devices. In this work, Cadmium Sulfide and Tin (IV) Sulfide were investigated as functional materials for thick-film chemoresistive gas-sensors fabrication and they were tested both in thermo- and in photo-activation modes. Furthermore, electrical characterization was carried out in order to verify their gas sensing properties and material stability, by comparing the results obtained with metal sulfides to those obtained by using their metal-oxides counterparts. The results highlighted the possibility to use metal sulfides as a novel class of sensing materials, owing to their selectivity to specific compounds, stability, and the possibility to operate at room temperature.
RESUMO
Sonochemical production of tin(II) and tin(IV) sulfides is investigated. Different conditions of syntheses are examined: used solvent (ethanol or ethylenediamine), source of tin (SnCl2 or SnCl4), the molar ratio of thioacetamide to the tin source, and time of sonication. The obtained powders are characterized by the X-ray diffraction method (PXRD), scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), energy-dispersive X-ray spectroscopy (EDX), and the Tauc method. Raman and FT-IR measurements were performed for the obtained samples, which additionally confirmed the crystallinity and phase composition of the samples. The influence of experimental conditions on composition (is it SnS or SnS2), morphology, and on the bandgap of obtained products is elucidated. It was found that longer sonication times favor more crystalline product. Each of bandgaps is direct and most of them show typical values - c.a. 1.3 eV for SnS and 2.4 eV for SnS2. However, there are some exceptions. Synthesized powders show a variety of forms such as needles, flower-like, rods, random agglomerates (SnS2) and balls (SnS). Using ethanol as a solvent led to powders of SnS2 independently of which tin chloride is used. Sonochemistry in ethylenediamine is more diverse: this solvent protects Sn2+ cations from oxidation so mostly SnS is obtained, while SnCl4 does not produce powder of SnS2 but Sn(SO4)2 instead or, at a higher ratio of thioacetamide to SnCl4, green clear mixture.
RESUMO
SnS and SnS2 powders were synthesized with the use of ultrasound. The indirect sonication was applied with ultrasound frequency 40 kHz and acoustic power 38 W/L. Products of syntheses were examined with PXRD, TEM, EDX, XPS, and UV-Vis (the Tauc method) investigations. The resulting microparticles were used for tip coating of copper cathodes. These electrodes were used in the degradation of model azo-dye Metanil Yellow by the electro-Fenton process. The efficiencies of degradation using copper, SnS-coated copper, and SnS2-coated copper cathodes are compared. Kinetics of degradation of Metanil Yellow in the electro-Fenton process with the application of three different cathodes is also investigated. It was found that the degradation follows pseudo-first-order and that SnS-coated copper cathode improves the efficiency of degradation, while SnS2-coated copper cathode decreases the efficiency of degradation.
RESUMO
Sodium-ion batteries are gradually regarded as a prospective alternative to lithium-ion batteries due to the cost consideration. Here, three kinds of tin (IV) sulfide nanosheets are controllably designed with progressively exposed active facets, leading to beneficial influences on the Na+ storage kinetics, resulting in gradient improvements of pseudocapacitive response and rate performance. Interestingly, different forms of kinetics results are generated accompanying with the morphology and structure evolution of the three nanosheets. Finally, detailed density functional theory simulations are also applied to analyze the above experimental achievements, proving that different exposed facets of crystalline anodes possess dissimilar Na+ storage kinetics. The investigation experiences and conclusions shown in this work are meaningful to explore many other proper structure design routes toward the high-rate and stable metal-ions storage.