RESUMO
The transition from mafic to felsic upper continental crust (UCC) is crucial to habitability of Earth, and may be related to the onset of plate tectonics. Thus, defining when this crustal transition occurred has great significance for the evolution of Earth and its inhabitants. We demonstrate that V isotope ratios (reported as δ51V) provide insights into this transition because they correlate positively with SiO2 and negatively with MgO contents during igneous differentiation in both subduction zones and intraplate settings. Because δ51V is not affected by chemical weathering and fluid-rock interactions, δ51V of the fine-grained matrix of Archean to Paleozoic (3 to 0.3 Ga) glacial diamictite composites, which sample the UCC at the time of glaciation, reflect the chemical composition of the UCC through time. The δ51V values of glacial diamictites systematically increase with time, indicating a dominantly mafic UCC at ~3 Ga; the UCC was dominated by felsic rocks only after 3 Ga, coinciding with widespread continental emergence and many independent estimates for the onset of plate tectonics.
RESUMO
Intercalation-type layered oxides have been widely explored as cathode materials for aqueous zinc-ion batteries (ZIBs). Although high-rate capability has been achieved based on the pillar effect of various intercalants for widening interlayer space, an in-depth understanding of atomic orbital variations induced by intercalants is still unknown. Herein, we design an NH4+-intercalated vanadium oxide (NH4+-V2O5) for high-rate ZIBs, together with deeply investigating the role of the intercalant in terms of atomic orbital. Besides extended layer spacing, our X-ray spectroscopies reveal that the insertion of NH4+ could promote electron transition to 3dxy state of V t2g orbital in V2O5, which significantly accelerates the electron transfer and Zn-ion migration, further verified by DFT calculations. As results, the NH4+-V2O5 electrode delivers a high capacity of 430.0 mA h g-1 at 0.1 A g-1, especially excellent rate capability (101.0 mA h g-1 at 200 C), enabling fast charging within 18 s. Moreover, the reversible V t2g orbital and lattice space variation during cycling are found via ex-situ soft X-ray absorption spectrum and in-situ synchrotron radiation X-ray diffraction, respectively. This work provides an insight at orbital level in advanced cathode materials.
RESUMO
The enzyme molybdenum nitrogenase converts atmospheric nitrogen gas to ammonia and is of critical importance for the cycling of nitrogen in the biosphere and for the sustainability of life. Alternative vanadium and iron-only nitrogenases that are homologous to molybdenum nitrogenases are also found in archaea and bacteria, but they have a different transition metal, either vanadium or iron, at their active sites. So far alternative nitrogenases have only been found in microbes that also have molybdenum nitrogenase. They are less widespread than molybdenum nitrogenase in bacteria and archaea, and they are less efficient. The presumption has been that alternative nitrogenases are fail-safe enzymes that are used in situations where molybdenum is limiting. Recent work indicates that vanadium nitrogenase may play a role in the global biological nitrogen cycle and iron-only nitrogenase may contribute products that shape microbial community interactions in nature.
Assuntos
Bactérias/metabolismo , Ferro/metabolismo , Nitrogênio/metabolismo , Nitrogenase/metabolismo , Archaea/enzimologia , Archaea/metabolismo , Bactérias/enzimologia , Molibdênio/metabolismo , Fixação de NitrogênioRESUMO
The elegance and accuracy of biological ion channels inspire the fabrication of artificial devices with similar properties. Here, we report the fabrication of iontronic devices capable of delivering ions at the nanomolar (nmol) level of accuracy. The triangular nanofluidic device prepared with reconstructed vanadium pentoxide (VO) membranes of thickness 45 ± 5.5 µm can continuously deliver K+, Na+, and Ca2+ ions at the rate of 0.44 ± 0.24, 0.35 ± 0.06, and 0.03 nmol/min, respectively. The ionic flow rate can be further tuned by modulating the membrane thickness and salt concentration at the source reservoir. The triangular VO device can also deliver ions in minuscule doses (â¼132 ± 9.7 nmol) by electrothermally heating (33 °C) with a nichrome wire (NW) or applying light of specific intensities. The simplicity of the fabrication process of reconstructed layered material-based nanofluidic devices allows the design of complicated iontronic devices such as the three-terminal-Ni-VO (3T-Ni-VO) devices.
RESUMO
In order to simultaneously accelerate ion and electron transfer in sodium-ion battery (SIB) cathodes, a topotactic superlattice was utilized, in which the atomically intrinsic lattice-matching effect from inner to external surface can boost the charge transfer due to the disappearance of the heterojunction interface. Herein, a topotactic syntopogenous Na3VF6/NaVF3 superlattice formulated as Na2.9V1.1F6 (NVF) was synthesized by a facile one-step low-temperature hydrothermal reaction. NVF nanoparticles show an excellent Na+ storage capacity (â¼205 mAh g-1) in a high voltage window up to 4.2 V with ultralong cycling stability. That is associated with the mixed occupancy of V and Na in NVF. The multivalent V centers serve as electron reservoirs to inhibit phase transformation, and the Na-enriched Na3VF6 with better electron conductivity acts as a Na+ reservoir for effective electron transfer. Highly reversible (de)intercalation of Na+ is achieved in the channel of perovskite-type NaVF3 with structural integrity.
RESUMO
Understanding how Nature accomplishes the reduction of inert nitrogen gas to form metabolically tractable ammonia at ambient temperature and pressure has challenged scientists for more than a century. Such an understanding is a key aspect toward accomplishing the transfer of the genetic determinants of biological nitrogen fixation to crop plants as well as for the development of improved synthetic catalysts based on the biological mechanism. Over the past 30 years, the free-living nitrogen-fixing bacterium Azotobacter vinelandii emerged as a preferred model organism for mechanistic, structural, genetic, and physiological studies aimed at understanding biological nitrogen fixation. This review provides a contemporary overview of these studies and places them within the context of their historical development.
Assuntos
Azotobacter vinelandii , Fixação de Nitrogênio , Azotobacter vinelandii/genética , Azotobacter vinelandii/metabolismo , Nitrogenase/química , Nitrogenase/genética , Nitrogenase/metabolismo , Amônia , NitrogênioRESUMO
In this study, a simple green synthesis of vanadium pentoxide nanoparticles (VNPs) was prepared by the extract of Kaffir lime fruit (Citrus hystrix) as a green reducing and stabilizing agent, along with the investigation of calcination temperature was carried out at 450 and 550 °C. It was affirmed that, at higher temperature (550 °C), the VNPs possessed a high degree crystalline following the construction of (001) lattice diffraction within an increase in crystalline size from 47.12 to 53.51 nm, although the band gap of the materials at 450 °C was lower than that of the VNPs-550 (2.53 versus 2.66 eV, respectively). Besides, the materials were assessed for the potential bioactivities toward antibacterial, antifungal, DNA cleavage, anti-inflammatory, and hemolytic performances. As a result, the antibacterial activity, with minimal inhalation concentration (MIC) < 6.25 µg/mL for both strains, and fungicidal one of the materials depicted the dose-dependent effects. Once, both VNPs exhibited the noticeable efficacy of the DNA microbial damage, meanwhile, the outstanding anti-inflammatory agent was involved with the IC50 of 123.636 and 227.706 µg/mL, accounting for VNPs-450 and VNPs-550, respectively. Furthermore, this study also demonstrated the hemolytic potential of the VNPs materials. These consequences declare the prospects of the VNPs as the smart and alternative material from the green procedure in biomedicine.
Assuntos
Antibacterianos , Citrus , Frutas , Extratos Vegetais , Compostos de Vanádio , Citrus/química , Extratos Vegetais/química , Extratos Vegetais/farmacologia , Compostos de Vanádio/química , Compostos de Vanádio/farmacologia , Frutas/química , Antibacterianos/farmacologia , Antibacterianos/química , Antibacterianos/síntese química , Nanopartículas/química , Testes de Sensibilidade Microbiana , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/química , Antifúngicos/farmacologia , Antifúngicos/química , Antifúngicos/síntese química , Temperatura , Hemólise/efeitos dos fármacos , Química Verde , HumanosRESUMO
Introducing N atoms in vanadium oxides (VOx) of aqueous Zn-ion batteries (ZIBs) can reduce their bandgap energy and enhance their electronic conductivity, thereby promoting the diffusion of Zn2+. The close-packed vanadium oxynitride (VON) generated often necessitates the intercalation of water molecules for restructuring, rendering it more conducive for zinc ion intercalation. However, its dense structure often causes structural strain and the formation of by-products during this process, resulting in decreased electrochemical performance. Herein, carbon-coated porous V2O3/VN nanosheets (p-VON@C) are constructed by annealing vanadium metal-organic framework in an ammonia-contained environment. The designed p-VON@C nanosheets are efficiently converted to low-crystalline hydrated N-doped VOx during subsequent activation while maintaining structural stability. This is because the V2O3/VN heterojunction and abundant oxygen vacancies in p-VON@C alleviate the structural strain during water molecule intercalation, and accelerate the intercalation rate. Carbon coating is beneficial to prevent p-VON@C from sliding or falling off during the activation and cycling process. Profiting from these advantages, the activated p-VON@C cathode delivers a high specific capacity of 518 mAh g-1 at 0.2 A g-1 and maintains a capacity retention rate of 80.9% after 2000 cycles at 10 A g-1. This work provides a pathway to designing high-quality aqueous ZIB cathodes.
RESUMO
Cation-intercalated vanadates, which have considerable promise as the cathode for high-performance potassium metal batteries (PMBs), suffer from structural collapse upon K+ insertion and desertion. Exotic cations in the vanadate cathode may ease the collapse, yet their effect on the intrinsic cation remains speculative. Herein, a stable and dendrite-free PMB, composed of a Na+ and K+ co-intercalated vanadate (NKVO) cathode and a liquid NaK alloy anode, is presented. A series of NKVO with tuneable Na/K ratios are facilely prepared using MXene precursors, in which Na+ is testified to be immobilized upon cycling, functioning as a structural pillar. Due to stronger ionic bonding and lower Fermi level of Na+ compared to K+ , moderate Na+ intercalation could reduce K+ binding to the solvation sheath and favor K+ diffusion kinetics. As a result, the MXene-derived Na+ -pillared NKVO exhibits markedly improved specific capacities, rate performance, and cycle stability than the Na+ -free counterpart. Moreover, thermally-treated carbon paper, which imitates the microscopic structure of Chinese Xuan paper, allows high surface tension liquid NaK alloy to adhere readily, enabling dendrite-free metal anodes. By clarifying the role of foreign intercalating cations, this study may lead to a more rational design of stable and high-performance electrode materials.
RESUMO
Vanadium-based oxides have attracted much attention because of their rich valences and adjustable structures. The high theoretical specific capacity contributed by the two-electron-transfer process (V5+ /V3+ ) makes it an ideal cathode material for aqueous zinc-ion batteries. However, slow diffusion kinetics and poor structural stability limit the application of vanadium-based oxides. Herein, a strategy for intercalating organic matter between vanadium-based oxide layers is proposed to attain high rate performance and long cycling life. The V3 O7 ·H2 O is synthesized in situ on the carbon cloth to form an open porous structure, which provides sufficient contact areas with electrolyte and facilitates zinc ion transport. On the molecular level, the added organic matter p-aminophenol (pAP) not only plays a supporting role in the V3 O7 ·H2 O layer, but also shows a regulatory effect on the V5+ /V4+ redox process due to the reducing functional group on pAP. The novel composite electrode with porous structure exhibits outstanding reversible specific capacity (386.7 mAh g-1 , 0.1 A g-1 ) at a high load of 6.5 mg cm-2 , and superior capacity retention of 80% at 3 A g-1 for 2100 cycles.
RESUMO
The systematic structure modification of metal oxides is becoming more attractive, and effective strategies for structural tunning are highly desirable for improving their practical color-modulating energy storage performances. Here, the ability of a stoichiometrically tuned oxide-hydroxide complex of porous vanadium oxide, namely [V2O2+ξ(OH)3-ξ]ξ = 0:3 for multifunctional electrochromic supercapacitor application is demonstrated. Theoretically, the pre-optimized oxide complex is synthesized using a simple wet chemical etching technique in its optimized stoichiometry [V2O2+ξ(OH)3-ξ] with ξ = 0, providing more electroactive surface sites. The multifunctional electrode shows a high charge storage property of 610 Fg-1 at 1A g-1, as well as good electrochromic properties with high color contrast of 70% and 50% at 428 and 640 nm wavelengths, faster switching, and high coloration efficiency. When assembled in a solid-state symmetric electrochromic supercapacitor device, it exhibits an ultrahigh power density of 1066 mWcm-2, high energy density of 246 mWhcm-2, and high specific capacitance of 290 mFcm-2 at 0.2 mAcm-2. A prepared prototype device displays red when fully charged, green when half charged, and blue when fully discharged. A clear evidence of optimizing the multifunctional performance of electrochromic supercapacitor by stoichiometrical tuning is presented along with demonstrating a device prototype of a 25 cm2 large device for real-life applications.
RESUMO
Although the research on aqueous batteries employing metal as the anode is still mainly focused on the aqueous zinc-ion battery, aqueous iron-ion batteries are considered as promising aqueous batteries owing to the lower cost, higher specific capacity, and better stability. However, the sluggish Fe2+ (de)intercalation leads to unsatisfactory specific capacity and poor electrochemical stability, which makes it difficult to find cathode materials with excellent electrochemical properties. Herein, phenylamine (PA)-intercalated VOPO4 materials with expanded interlayer spacing are synthesized and applied successfully in aqueous iron-ion batteries. Owing to enough diffusion space from the expanded interlayer, which can boost fast Fe2+ diffusion, the aqueous iron-ion battery shows a high specific capacity of 170 mAh g-1 at 0.2 A g-1 , excellent rate performance, and cycle stability (96.2% capacity retention after 2200 cycles). This work provides a new direction for cathode material design in the development of aqueous iron-ion batteries.
RESUMO
Solar power represents an abundant and readily available source of renewable energy. However, its intermittent nature necessitates external energy storage solutions, which can often be expensive, bulky, and associated with energy conversion losses. This study introduces the concept of a photo-accelerated battery that seamlessly integrates energy harvesting and storage functions within a single device. In this research, a novel approach for crafting photocathodes is presented using hydrogenated vanadium pentoxide (H:V2O5) nanofibers. This method enhances optical activity, electronic conductivity, and ion diffusion rates within photo-accelerated Li-ion batteries. This study findings reveal that H:V2O5 exhibits notable improvements in specific capacity under both dark and illuminated conditions. Furthermore, it demonstrates enhanced diffusion kinetics and charge storage performance when exposed to light, as compared to pristine counterparts. This strategy of defect engineering holds great promise for the development of high-performance photocathodes in future energy storage applications.
RESUMO
The practical application of Li-S batteries is still severely restricted by poor cyclic performance caused by the intrinsic polysulfides shuttle effect, which is even more severe under the high-temperature condition owing to the inevitable increase of polysulfides' solubility and diffusion rate. Herein, tungsten-doped vanadium dioxide (W-VO2) micro-flowers are employed with first-order metal-insulator phase transition (MIT) property as a robust and multifunctional modification layer to hamper the shuttle effect and simultaneously improve the thermotolerance of the common separator. Tungsten doping significantly reduces the transition temperature from 68 to 35 °C of vanadium dioxide, which renders the W-VO2 easier to turn from the insulating monoclinic phase into the metallic rutile phase. The systematic experiments and theoretical analysis demonstrate that the temperature-induced in-suit MIT property endows the W-VO2 catalyst with strong chemisorption against polysulfides, low energy barrier for liquid-to-solid conversion, and outstanding diffusion kinetics of Li-ion under high temperatures. Benefiting from these advantages, the Li-S batteries with W-VO2 modified separator exhibit significantly improved rate and long-term cyclic performance under 50 °C. Remarkably, even at an elevated temperature (80 °C), they still exhibit superior electrochemical performance. This work opens a rewarding avenue to use phase-changing materials for high-temperature Li-S batteries.
RESUMO
Vanadium nitride (VN) is a promising electrode material for sodium-ion storage due to its multivalent states and high electrical conductivity. However, its electrochemical performance has not been fully explored and the storage mechanism remains to be clarified up to date. Here, the possibility of VN/carbon hybrid nanorods synthesized from a metal-organic framework for ultrafast and durable sodium-ion storage is demonstrated. The VN/carbon electrode delivers a high specific capacity (352 mA h g-1), fast-charging capability (within 47.5 s), and ultralong cycling stability (10 000 cycles) for sodium-ion storage. In situ XRD characterization and density functional theory (DFT) calculations reveal that surface-redox reactions at vanadium sites are the dominant sodium-ion storage mechanism. An energy-power balanced hybrid capacitor device is verified by assembling the VN/carbon anode and active carbon cathode, and it shows a maximum energy density of 103 Wh kg-1 at a power density of 113 W kg-1.
RESUMO
Magnesium ion batteries (MIBs) are expected to be the promising candidates in the post-lithium-ion era with high safety, low cost and almost dendrite-free nature. However, the sluggish diffusion kinetics and strong solvation capability of the strongly polarized Mg2+ are seriously limiting the specific capacity and lifespan of MIBs. In this work, catalytic desolvation is introduced into MIBs for the first time by modifying vanadium pentoxide (V2O5) with molybdenum disulfide quantum dots (MQDs), and it is demonstrated via density function theory (DFT) calculations that MQDs can effectively lower the desolvation energy barrier of Mg2+, and therefore catalyze the dissociation of Mg2+-1,2-Dimethoxyethane (Mg2+-DME) bonds and release free electrolyte cations, finally contributing to a fast diffusion kinetics within the cathode. Meanwhile, the local interlayer expansion can also increase the layer spacing of V2O5 and speed up the magnesiation/demagnesiation kinetics. Benefiting from the structural configuration, MIBs exhibit superb reversible capacity (≈300 mAh g-1 at 50 mA g-1) and unparalleled cycling stability (15 000 cycles at 2 A g-1 with a capacity of ≈70 mAh g-1). This approach based on catalytic reactions to regulate the desolvation behavior of the whole interface provides a new idea and reference for the development of high-performance MIBs.
RESUMO
Vanadium-based materials, due to their diverse valence states and open-framework lattice, are promising cathodes for aqueous zinc ion batteries (AZIBs), but encounters the major challenges of in situ electrochemical activation process, potent polarity of the aqueous electrolyte and periodic expansion/contraction for efficient Zn2+ storage. Herein, architecting vanadium nitride (VN) nanosheets over titanium-based hollow nanoarrays skeletal host (denoted VNTONC) can simultaneously modulate address those challenges by creating multiple interfaces and maintaining the (1 1 1) phase of VN, which optimizes the Zn2+ storage and the stability of VN. Benefiting from the modulated crystalline thermodynamics during the electrochemical activation of VN, two outcomes are achieved; I) the cathode transforms into a nanocrystalline structure with increased active sites and higher conductivity and; II) a significant portion of the (1 1 1) crystal facets is retained in the process leading to the additional Zn2+ storage capacity. As a result, the as-prepared VNTONC electrode demonstrates remarkable discharge capacities of 802.5 and 331.8 mAh g-1 @ 0.5 and 6.0 A g-1, respectively, due to the enhanced kinetics as validated by theoretical calculations. The assembled VNTONC||Zn flexible ZIB demonstrates excellent Zn storage properties up to 405.6 mAh g-1, and remarkable robustness against extreme operating conditions.
RESUMO
Vanadium-based compounds have attracted significant attention as cathodes for aqueous zinc metal batteries (AZMBs) because of their remarkable advantages in specific capacities. However, their low diffusion coefficient for zinc ions and structural collapse problems lead to poor rate capability and cycle stability. In this work, bilayered Sr0.25V2O5·0.8H2O (SVOH) nanowires are first reported as a highly stable cathode material for rechargeable AZMBs. The synergistic pillaring effect of strontium ions and water molecules improves the structural stability and ion transport dynamics of vanadium-based compounds. Consequently, the SVOH cathode exhibits a high capacity of 325.6 mAh g-1 at 50 mA g-1, with a capacity retention rate of 72.6% relative to the maximum specific capacity at 3.0 A g-1 after 3000 cycles. Significantly, a unique single-nanowire device is utilized to demonstrate the excellent conductivity of the SVOH cathode directly. Additionally, the energy storage mechanism of zinc insertion and extraction is investigated using a variety of advanced in situ and ex situ analysis techniques. This method of ion intercalation to improve electrochemical performance will further promote the development of AZMBs in large-scale applications.
RESUMO
The metal-insulator (MI) transition of vanadium dioxide (VO2) is effectively modulated by oxygen vacancies, which decrease the transition temperature and insulating resistance. Oxygen vacancies in thin films can be driven by oxygen transport using electrochemical potential. This study delves into the role of crystallographic channels in VO2 in facilitating oxygen transport and the subsequent tuning of electrical properties. A model system is designed with two types of VO2 thin films: (100)- and (001)-oriented, where channels align parallel and perpendicular to the surface, respectively. Growing an oxygen-deficient TiO2 layer on these VO2 films prompted oxygen transport from VO2 to TiO2. Notably, in (001)-VO2 film, where oxygen ions move along the open channels, the oxygen migration deepens the depleted region beyond that in (100)-VO2, leading to more pronounced changes in metal-insulator transition behaviors. The findings emphasize the importance of understanding the intrinsic crystal structure, such as channel pathways, in controlling ionic defects and customizing electrical properties for applications.
RESUMO
Sodium-ion hybrid capacitors (SIHCs) have attracted much attention due to integrating the high energy density of battery and high out power of supercapacitors. However, rapid Na+ diffusion kinetics in cathode is counterbalanced with sluggish anode, hindering the further advancement and commercialization of SIHCs. Here, aiming at conversion-type metal sulfide anode, taking typical VS2 as an example, a comprehensive regulation of nanostructure and electronic properties through NH4 + pre-intercalation and Mo-doping VS2 (Mo-NVS2) is reported. It is demonstrated that NH4 + pre-intercalation can enlarge the interplanar spacing and Mo-doping can induce interlayer defects and sulfur vacancies that are favorable to construct new ion transport channels, thus resulting in significantly enhanced Na+ diffusion kinetics and pseudocapacitance. Density functional theory calculations further reveal that the introduction of NH4 + and Mo-doping enhances the electronic conductivity, lowers the diffusion energy barrier of Na+, and produces stronger d-p hybridization to promote conversion kinetics of Na+ intercalation intermediates. Consequently, Mo-NVS2 delivers a record-high reversible capacity of 453 mAh g-1 at 3 A g-1 and an ultra-stable cycle life of over 20 000 cycles. The assembled SIHCs achieve impressive energy density/power density of 98 Wh kg-1/11.84 kW kg-1, ultralong cycling life of over 15000 cycles, and very low self-discharge rate (0.84 mV h-1).