Functionalization of hybrid surface microparticles for in vitro cellular antigen classification.

Hybrid material surfaces on microparticles are emerging as vehicles for many biomedical multiplexing applications. Functionalization of these hybrid surface microparticles to biomolecules presents unique challenges related to optimization of surface chemistries including uniformity, repeatability, and sample sparring. Hybrid interfaces between microlevel surfaces and individual biomolecules will provide different microenvironments impacting the surface functionalization optimization and efficiency. Here, we propose and validate the first demonstration of streptavidin adsorption-based antibody functionalization on unmodified, hybrid surface microparticles for in vitro analysis. We test this analytical technique and fabricate hybrid surface microparticles with a polystyrene core and aluminum oxide semi-coating. Additionally, we optimize the streptavidin-biotin functionalization chemistry in both assay implementation and sample sparring via analytical mass balances for these microparticles and subsequently conjugate anti-human CD11b antibodies. Result confirmation and characterization occurs from ultraviolet protein absorbance and ImageJ processing of fluorescence microscopy images. Additionally, we design and implement the multi-sectional imaging (MSI) approach to support functionalization uniformity on the hybrid surface microparticles. Finally, as a proof-of-concept performance, we validate anti-CD11b antibodies functionalization by visualizing hybrid surface microparticles conjugate to human neutrophils isolated from blood samples collected from potentially septic patients. Our study introduces and defines a category of functionalization for hybrid surface microparticles with the intent of minuscule sample volumes, low cost, and low environmental impact to be used for many cellular or proteomic in vitro multiplexing applications in the future. Graphical abstract.

Multiphysical analysis of nanoparticles and their effects on plants.

Nanoparticles are the magic bullets and at the leading edge in the field of nanotechnology, and their unique properties make these materials indispensable and superior in many areas, including the electronic field. Extensive applications of nanomaterials are incontrovertibly entering our living system. The increasing use of nanomaterials into the ecosystem is one of the crucial environmental factors that human being is facing. Nanomaterials raise noticeable toxicological concerns; particularly their accumulation in plants and the resultant toxicity may affect the food chain. Here, we analyzed the characterization of nanomaterials, such as graphene, Al2 O3 , TiO2 , and semi-insulating or conducting nanoparticles. Quantitative evaluation of the nanomaterials was conducted and their commercialization aspects were discussed. Various characterization techniques, scanning electron microscopy, X-ray diffraction, and ultraviolet rays were utilized to identify the morphology, phase, absorbance, and crystallinity. In addition, we analyzed the effects of nanomaterials on plants. The toxicity of nanoparticles has severe effects on loss of morphology of the plants. Potential mechanisms including physical and physiological effects were analyzed. In future studies, it is indispensable to assess widely accepted toxicity evaluation for safe production and use of nanomaterials.

Particle transfer and adherence to human skin compared with cotton glove and pre-moistened polyvinyl alcohol exposure sampling substrates.

Measurement of skin exposure to particles using interception (e.g., cotton gloves) and removal (e.g., wiping) sampling techniques could be inaccurate because these substrates do not have the same topography and adhesion characteristics as skin. The objective of this study was to compare particle transfer and adherence to cotton gloves, cotton gloves with artificial sebum, and a pre-moistened polyvinyl alcohol (PVA) material with bare human skin (fingertip, palm). Experiments were performed with aluminum oxide powder under standardized conditions for three types of surfaces touched, applied loads, contact times, and powder mass levels. In the final mixed model, the fixed effects of substrate, surface type, applied load, and powder mass and their significant two-way interaction terms explained 71% (transfer) and 74% (adherence) of the observed total variance in measurements. For particle mass transfer, compared with bare skin, bias was -77% (cotton glove with sebum) to +197% (PVA material) and for adherence bias ranged from -40% (cotton glove) to +428% (PVA material), which indicated under- and over-sampling by these substrates, respectively. Dermal exposure assessment would benefit from sampling substrates that better reflect human skin characteristics and more accurately estimate exposures. Mischaracterization of dermal exposure has important implications for exposure and risk assessment.

Intrinsic soil property effects on Cd phytotoxicity to Ligustrum japonicum 'Howardii' expressed as different fractions of Cd in forest soils.

A better comprehensive understanding of the influence of soil/solution properties on cadmium (Cd) phytotoxicity is essential for soil Cd ecological risk assessment. The toxicity of soil spiked Cd to Ligustrum japonicum 'Howardii' seedling growth was conducted by the greenhouse pot experiments using 13 typical forest soils selected from mainland of China. The results showed that the ranges of Cd toxicity thresholds of 10% seedling growth inhibition (EC10) and 50% inhibition (EC50) followed the order: soil pore water Cd (EC10 on average 0.88 mg L-1 with the variation of 54.9 folds and EC50 on average 2.28 mg L-1 with variation of 41.8 folds), DTPA extractable Cd (EC10 on average 5.4 mg kg-1 with 20.9 folds variation and EC50 on average 17.86 mg kg-1 with 6.6 folds variation), total added Cd (EC10 on average 6.55 mg kg-1 with 16.7 folds variation and EC50 on average 22.11 mg kg-1 with 5.1 folds variation), which suggested that whatever the available Cd expressed, its toxicity is largely affected by soil properties. The empirical multiple equations were well developed between different fractions of Cd toxicity thresholds ECx (x = 10 or 50) and soil/solution. The results also showed that the pH inversely correlated with EC10 (r2 = 0.54, P < 0.01) and EC50 (r2 = 0.63, P < 0.001) based on soil pore water, indicating the ECx decreased with more toxicity as pH increased. No single significant soil solution properties were found for ECx in DTPA extractable Cd. For the ECx of DTPA extractable and total Cd, the content of aluminum oxides in soil and soil pH were the two significant factors inversely related with ECx, which explained 68%-79% of the inter-soil variation, respectively. Overall, soil or solution pH was the most important factor controlling Cd toxicity thresholds. Meanwhile, significant negative correlations existed between the soil solution pH and the slopes of parameter (b) of the dose-response curves for different fractions of Cd, implying that the growth of toxic effect enhanced as unit Cd dosage increased in low pH soils. These results will be helpful to evaluate the metal ecological risk in forest soils.

Effects of increasing concentrations of unamended and gypsum modified bauxite residues on soil microbial community functions and structure - A mesocosm study.

Bauxite residues (BR), commonly named red muds, are the saline-sodic waste produced during the extraction of alumina from bauxite. In this study, four kinds of BR were mixed at increasing concentrations with two soils in a mesososm experiment. Unamended BR from Provence (PRO) and Guinea (GUI) bauxite were selected, and Modified Bauxite Residues from PRO and GUI (MBR-PRO and MBR-GUI) were obtained by gypsum application and repeated leaching, in order to reduce their pH, electrical conductivity (EC) and exchangeable sodium percentage (ESP). Several indicators of microbial community functions and structure (growth of culturable bacteria; enzymatic activities; C-sourced substrates degradation (Biolog®); bacteria and fungi PCR-RFLP fingerprints) were measured after 35 days of incubation. Results showed that PRO residue had stronger negative effects than GUI on all the tested indicators. Residues modified by gypsum addition (MBR-PRO, MBR-GUI) were equally or sometimes less harmful compared to unamended residues. Microbial activities (bacterial growth and enzyme activities) were more inhibited than the diversity of microbial functions (Biolog®), and the structure of bacterial and fungal communities was not affected by increasing concentrations of bauxite residues. EC and ESP were the main factors explaining the inhibition of microbial activities, although the origin of bauxite residue is of great importance too.

The Vitamin A and D Exposure of Cells Affects the Intracellular Uptake of Aluminum Nanomaterials and its Agglomeration Behavior: A Chemo-Analytic Investigation.

Aluminum (Al) is extensively used for the production of different consumer products, agents, as well as pharmaceuticals. Studies that demonstrate neurotoxicity and a possible link to Alzheimer's disease trigger concern about potential health risks due to high Al intake. Al in cosmetic products raises the question whether a possible interaction between Al and retinol (vitamin A) and cholecalciferol (vitamin D3) metabolism might exist. Understanding the uptake mechanisms of ionic or elemental Al and Al nanomaterials (Al NMs) in combination with bioactive substances are important for the assessment of possible health risk associated. Therefore, we studied the uptake and distribution of Al oxide (Al2O3) and metallic Al0 NMs in the human keratinocyte cell line HaCaT. Possible alterations of the metabolic pattern upon application of the two Al species together with vitamin A or D3 were investigated. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging and inductively coupled plasma mass spectrometry (ICP-MS) were applied to quantify the cellular uptake of Al NMs.

Effects of Bauxite and Alumina Exposure on Incidence of Cancer - Meta-analysis.

Bauxite is an ore from which Aluminium is produced. Malaysia, once the leading producer of bauxite has reduced production as mining activity has caused community outrage. Due to concerns about health concerns, rising pollution and environmental hazards, the government has revoked the licenses of bauxite miners. We therefore did a meta-analysis to assess the relationship between exposure to Bauxite and Alumina with incidence of various types of cancers. Bauxite mines and alumina refineries. Individuals of all ages exposed to Bauxite and Alumina. Exposure to bauxite and alumina. Incidence due to overall cancers and specific types of cancers. Exposure to bauxite and alumina did not cause variations in incidence of overall cancer and specific types of cancer such as cancer of lip, cancer of the oral cavity and pharynx, cancer of digestive organs and others. We conclude that there is no evidence that bauxite or alumina exposure cause increase incidence of cancer but due to the small number of studies included in this review, we recommend more cohort studies to be done in future.

Ecotoxicological assessment of bauxite residue (red mud) overflow treated by dissolved air flotation (DAF).

In this study, the effluent from the Bayer process of transforming bauxite into alumina, followed by dissolved air flotation (DAF) treatment, was evaluated to identify the best experimental conditions that generate less toxic or nontoxic effluent for discharge. Two freshwater organisms, the Chlorophyceae microalga Raphidocelis subcapitata (96-h algal growth inhibition test), and the microcrustacean Daphnia similis (48-h acute immobility test), were used to analyze the efficiency of effluent treatment by detecting and comparing the toxicity of the treated effluent. Experimental factorial planning used different concentrations of the coagulant ferric chloride and the flocculant Nalco® N-99-005B, and different recycle ratios. The highest recycle ratio (30%) and highest flocculant concentration (150 mg/L) had the best solids removal efficiency, above 90%. Probably the higher concentration of flocculant led to the formation of a more stable froth, promoting an increase in the hydrophobic characteristics of the flocs. Two operating conditions were satisfactory according to acute and chronic bioassays, with removal efficiencies of total suspended solids and turbidity higher than 98%, for both variables. Producers, R. subcapitata microalga, were more sensitive than the primary consumers, D. similis microcrustaceans, indicating the importance of performing tests with different bioindicators.

Influence of Al2O3 Nanoparticles on the Soil Elements.

The behavior of nanoparticles released to the soil has been extensively studied in recent years; however, the effects of nanoparticles on the distribution of soil elements and on sowing are still unknown. To this end, to examine the distribution of selected elements in soil, soil samples were treated weekly with 1.0 mg and 20.0 mg of Al2O3 nanoparticles for 3 weeks. Additionally, different types of plants (including taproot, fibrous root and ornamental bulbous plants) were sowed in the soil samples. After each treatment, surface soil samples were collected and digested with acid digestion. The concentrations of selected elements (Ca, Mg, Fe, Al, Cu, Co, Ni) were determined using a microwave plasma atomic emission spectrometer. Al2O3 treatment for 3 weeks, both low and high doses, had no effect on the Al content in soil samples when compared to the controls. Additionally, Al2O3 showed desorption properties on the analyte elements.

Laboratory evaluation of a low-cost, real-time, aerosol multi-sensor.

Exposure to occupational aerosols are a known hazard in many industry sectors and can be a risk factor for several respiratory diseases. In this study, a laboratory evaluation of low-cost aerosol sensors, the Dylos DC1700 and a modified Dylos known as the Utah Modified Dylos Sensor (UMDS), was performed to assess the sensors' efficiency in sampling respirable and inhalable dust at high concentrations, which are most common in occupational settings. Dust concentrations were measured in a low-speed wind tunnel with 3 UMDSs, collocated with an aerosol spectrometer (Grimm 1.109) and gravimetric respirable and inhalable samplers. A total of 10 tests consisting of 5 different concentrations and 2 test aerosols, Arizona road dust and aluminum oxide, were conducted. For the Arizona road dust, total particle count was strongly related between the spectrometer and the UMDS with a coefficient of determination (R2) between 0.86-0.92. Particle count concentrations measured with the UMDS were converted to mass and also were related with gravimetrically collected inhalable and respirable dust. The UMDS small bin (i.e., all particles) compared to the inhalable sampler yielded an R2 of 0.86-0.92, and the large bin subtracted from the small bin (i.e., only the smallest particles) compared to the respirable sampler yielded an R2 of 0.93-0.997. Tests with the aluminum oxide demonstrated a substantially lower relationship across all comparisons. Furthermore, assessment of intra-instrument variability was consistent for all instruments, but inter-instrument variability indicated that each instrument requires its own calibration equation to yield accurate exposure estimates. Overall, it appears that the UMDS can be used as a low-cost tool to estimate respirable and inhalable concentrations found in many workplaces. Future studies will focus on deployment of a UMDS network in an occupational setting.

Metal leaching from refinery waste hydroprocessing catalyst.

The present study aims to develop an eco-friendly methodology for the recovery of nickel (Ni), molybdenum (Mo), and vanadium (V) from the refinery waste spent hydroprocessing catalyst. The proposed process has two stages: the first stage is to separate alumina, while the second stage involves the separation of metal compounds. The effectiveness of leaching agents, such as NH4OH, (NH4)2CO3, and (NH4)2S2O8, for the extraction of Mo, V, Ni, and Al from the refinery spent catalyst has been reported as a function of reagent concentration (0.5 to 2.0 molar), leaching time (1 to 6 h), and temperature (35 to 60°C). The optimal leaching conditions were achieved to obtain the maximum recovery of Mo, Ni, and V metals. The effect of the mixture of multi-ammonium salts on the metal extraction was also studied, which showed an adverse effect for Ni and V, while marginal improvement was observed for Mo leaching. The ammonium salts can form soluble metal complexes, in which stability or solubility depends on the nature of ammonium salt and the reaction conditions. The extracted metals and support can be reused to synthesize a fresh hydroprocessing catalyst. The process will reduce the refinery waste and recover the expensive metals. Therefore, the process is not only important from an environmental point of view but also vital from an economic perspective.

FIA-coupled spectrophotometric method for determination of Cr (VI) traces in natural waters: application of in-line dissolution of 1,5-diphenylcarbazide after heat treatment and activated alumina as adsorbent for preconcentration.

This work proposes the quantification of Cr (VI) ions in natural waters in trace level, using activated alumina (Al2O3) as preconcentration support, controlled in-line dissolution of the solidified chromophore diphenylcarbazide after heat treatment and spectrophotometric detection. The manifold ensures high sensitivity of analytical response, good repeatability, and stability. In this work, optimization of experimental conditions of a flow injection system was chosen as the parameters for greater sensitivity and better selectivity. The selected optimized conditions were 0.30 mol L-1 for H2SO4 concentration, system flow rate as 0.40 mL min-1, sample injection volume of 192.50 µL, 2 min for preconcentration time, and 0.10 mol L-1 for eluent concentration. The analytical curves obtained for real sample analysis show linear range from 0.192 to 0.961 µM, linear correlation coefficient R = 0.9997 and LOD = 0.024 µM. The preconcentration factor of about four times was obtained through the passage of 800 µL of a standard solution containing 0.961 µM of Cr (VI) through mini-column of preconcentration followed by elution at 192.5 µL of NH4OH 0.1 mol L-1 solution. The solid chromogenic reagent presented high durability (weeks in daily use with mass of 0.0993 g) and good reproducibility in analytical signal. The reactivation of the mini-column of alumina should be executed after ten injections of eluent, using 800 µL of HCl 0.02 mol L-1 solution in flow through the same. Each cycle of injection and elution of the sample takes about 5 min on the proposed terms. Despite the length of each cycle still be high, low concentrations can be detected using a technique of relatively low cost. This is due in part, the association dissolution of the chromogenic reagent directly in the line and the preconcentration step. Another important factor is the economy of reagent chromogenic, low generation of reject contributing to better quality of the environment, and the high potential for applications to work in field.

Assessment of airborne nanoparticles present in industry of aluminum surface treatments.

Conventional industrial processes are emission sources of unintended nanoparticles which are potentially harmful for the environment and human health. The aim of this study is to assess airborne nanoparticle release from aluminum surface treatment processes in various workplaces. Two direct reading instruments, a scanning mobility particle sizer to measure size distribution and a nanoparticle surface area monitoring to measure the surface area of particles deposited in the human lung, were employed to perform area monitoring. The lacquering paint was the process which released the highest concentration of particles from 10-487 nm (7.06 × 106 particles/cm3). The lacquering baths process emitted particles of the largest average size (76.9 nm) and the largest surface area deposited in the human lung (167.4 µm2/cm3). Conversely, the anodizing bath process generated particles of the smallest average size (44.3 nm) and the lowest human lung-deposited surface area (1.2 µm2/cm3). The total number of particles and the surface area can only be fairly correlated for environments in which the surface area presented higher values. The transmission electron microscopy analysis confirmed the presence of aluminum oxide particles of different dimensions near the LB and AB areas and polymeric-based particles near the LP areas. The findings of this study indicated that lacquering and anodizing surface treatments are indeed responsible for the emission of airborne nanoparticles. It also highlights the importance of control strategies as a means of protecting workers' health and environment.

Automatic Detection of Pearlite Spheroidization Grade of Steel Using Optical Metallography.

To eliminate the effect of subjective factors during manually determining the pearlite spheroidization grade of steel by analysis of optical metallography images, a novel method combining image mining and artificial neural networks (ANN) is proposed. The four co-occurrence matrices of angular second moment, contrast, correlation, and entropy are adopted to objectively characterize the images. ANN is employed to establish a mathematical model between the four co-occurrence matrices and the corresponding spheroidization grade. Three materials used in coal-fired power plants (ASTM A315-B steel, ASTM A335-P12 steel, and ASTM A355-P11 steel) were selected as the samples to test the validity of our proposed method. The results indicate that the accuracies of the calculated spheroidization grades reach 99.05, 95.46, and 93.63%, respectively. Hence, our newly proposed method is adequate for automatically detecting the pearlite spheroidization grade of steel using optical metallography.

Safety Assessment of Alumina and Aluminum Hydroxide as Used in Cosmetics.

This is a safety assessment of alumina and aluminum hydroxide as used in cosmetics. Alumina functions as an abrasive, absorbent, anticaking agent, bulking agent, and opacifying agent. Aluminum hydroxide functions as a buffering agent, corrosion inhibitor, and pH adjuster. The Food and Drug Administration (FDA) evaluated the safe use of alumina in several medical devices and aluminum hydroxide in over-the-counter drugs, which included a review of human and animal safety data. The Cosmetic Ingredient Review (CIR) Expert Panel considered the FDA evaluations as part of the basis for determining the safety of these ingredients as used in cosmetics. Alumina used in cosmetics is essentially the same as that used in medical devices. This safety assessment does not include metallic or elemental aluminum as a cosmetic ingredient. The CIR Expert Panel concluded that alumina and aluminum hydroxide are safe in the present practices of use and concentration described in this safety assessment.

Adsorption of Oxyanions from Industrial Wastewater using Perlite-Supported Magnetite.

Most studies on oxyanion adsorption focus on their removal from synthetic solutions. It is often claimed that the considered adsorbents can be used to treat real (industrial) wastewaters, but this is seldom tested. Perlite-supported magnetite was characterized first by determining its specific surface area, magnetite content and by examining the coating. Tests on a synthetic solution showed that at the ideal pH values (pH 3 to 5), the order of adsorption is Mo(VI) > As(V) > Sb(V) > Cr(VI) > Se(VI). Most oxyanions can be removed for more than 75% with an adsorbent dosage of 1 g/l. Furthermore, perlite-supported magnetite has a higher removal efficiency for oxyanions than commercially available adsorbents and comparable adsorbents described in literature. Perlite-supported magnetite is suitable for treating real wastewaters: it can remove several oxyanions simultaneously from the considered industrial wastewater, but the adsorption order changes due to the presence of interfering anions.

Longitudinal analysis of respiratory outcomes among bauxite exposed workers in Western Australia.

INTRODUCTION: Occupational exposure to bauxite is common in the aluminium industry but little is known about the associated health effects. This study investigates respiratory health in relation to respirable bauxite dust exposure longitudinally over a 13 year period. METHODS: An inception cohort study recruited 91 male bauxite miners and 363 male alumina refinery workers. Annual measurements of respiratory symptoms and lung function were made. Cumulative exposure to bauxite was derived from job histories and air monitoring data. Mixed-effects modeling was used. RESULTS: No associations were found between cumulative bauxite exposure and respiratory symptoms or lung function. However, when analysis was restricted to the first three rounds, FEV1 was significantly lower in all exposure groups than in those unexposed but with no significant trend. CONCLUSION: Increasing exposure to bauxite dust in the aluminum industry was not associated with respiratory symptoms or consistent decrements in lung function.

A comparison of the closed-face cassette at different orientations while measuring total particles.

The current method for sampling aerosols using the 37-mm closed-face cassette (CFC) sampler is based on the orientation of the cassette at ∼45° from horizontal. There is some concern as to whether this method is appropriate and may be underestimating exposures. An alternative orientation at ∼0° (horizontal) has been discussed. This research compared the CFC's orientation at 45° from horizontal to the proposed orientation at horizontal, 0° in a controlled laboratory setting. The particles used in this study were fused alumina oxide in four sizes, approximately 9.5 µm, 12.8 µm, 18 µm, and 44.3 µm in aerodynamic diameter. For each test, one aerosol was dispersed in a wind tunnel operating at 0.2 m/s with samplers mounted in the breathing zone of a rotating mannequin. A sampling event consisted of four pairs of samplers, placed side by side (one pair at 45° and another at 0° cassette orientation), and exposed for a period of 45 minutes. A total of 12 sampling events, 3 sample events per particle size, were conducted with a total of 94 samples collected. Mass concentration measurements were compared to assess the relationship between the sampler orientations of the cassettes. In addition, the relationship between the mass collected on the cassette filter and on the interior walls of the cassette was also assessed. The results indicated that there was no significant difference between the measured concentrations based on the orientation of the CFCs. The amount of mass collected on the interior walls of the cassettes was relatively low (<5%) compared to expected (up to 100%) wall losses for both orientations.

Analysis of the leaching behavior of elements from coal combustion residues for better management.

In this study, fly ash, pond ash, bottom ash, slurry ash, raw water, pond water, and slurry samples were collected from Bokaro Thermal Power Plant, Bokaro, Jharkhand, India, and studied for the leachability of different elements by acid digestion and shake test at different liquid to solid (L/S) ratios. The raw water, pond water, slurry water, and leachates of acid digestion and shake tests were analyzed for the elements sodium (Na), potassium (K), calcium (Ca), iron (Fe), copper (Cu), cobalt (Co), manganese (Mn), cadmium (Cd), zinc (Zn), lead (Pb), nickel (Ni), and chromium (Cr). Shake test results confirmed that the water got saturated when the L/S ratio was equal to or above 10, indicating no further increase in concentration of elements at the L/S ratio of 10. Leaching behavior of Na from pond ash was not understood in the present study. In the study, the chemical composition showed that all the four types of ashes contain a small fraction of CaO (about 0.37 to 0.90 % by weight) and very high contents of SiO2 (about 55.14 to 58.34 % by weight) and Al2O3 (about 29.44 to 32.81 % by weight) that are the major composition of Portland cement. The study will help to understand the leachability potential of harmful elements present in fly ash, pond ash, bottom ash, and slurry ash under natural conditions and to take regulatory measures to protect the surface water, groundwater, and soil environment.

Bacterial diversity of extremely alkaline bauxite residue site of alumina industrial plant using culturable bacteria and residue 16S rRNA gene clones.

Bauxite residue (red mud), generated during the extraction of alumina from bauxite ore is characterized by high pH, high concentrations of soluble ions with low or virtually no organic matter. These extreme conditions along with numerous nutrient deficiencies, limit the microbial growth and vegetation establishment. In the present study, diversity of both cultivable and non-cultivable bacteria present in the red mud was investigated by 16S rDNA sequence analyses. The cultivable bacteria were identified as Agromyces indicus, Bacillus litoralis, B. anthracis, Chungangia koreensis, Kokuria flava, K. polaris, Microbacterium hominis, Planococcus plakortidis, Pseudomonas alcaliphila and Salinococcus roseus based on their 16S rDNA sequence analysis. These isolates were alkali tolerant, positive for one or more of the enzyme activities tested, able to produce organic acids and oxidize wide range of carbon substrates. For non-cultivable diversity of bacteria, DNA was extracted from the bauxite residue samples and 16S rDNA clone library was constructed. The 16S rDNA clones of this study showed affiliation to three major phyla predominant being betaproteobacteria (41.1%) followed by gammaproteobacteria (37.5%) and bacteroidetes (21.4%). We are reporting for the first time about the bacterial diversity of this unique and extreme environment.