RESUMO
BACKGROUND: The routine application of dental implants for replacing missing teeth has revolutionized restorative and prosthetic dentistry. However, cone beam computed tomography (CBCT) evaluations of structures adjacent to the implants are limited by metal artifacts. There are several methods for reducing metal artifacts, but this remains a challenging task. This study aimed to examine the effectiveness of metal artifact reduction (MAR) algorithms in identifying injuries of implants to the inferior alveolar canal in CBCT images. METHOD: In this in vitro study, mono-cortical bone windows were created and the inferior alveolar canal was revealed. Using 36 implants, pilot drill and penetration damage of the implant tip into the canal was simulated and compared to the control implants with distance from the canal. CBCT images were evaluated by four experienced observers with and without the MAR algorithm and compared to direct vision as the gold standard. The values of accuracy, sensitivity, and specificity were obtained and compared by receiver operating characteristic (ROC) curve (α = 0.05). RESULT: The area under the ROC curve values for detection of pilot drill injuries varied between 0.840-0.917 and 0.639-0.854 in the active and inactive MAR conditions, respectively. The increase in ROC area was only significant for one of the observers (P = 0.010). For diagnosing penetrative injuries, the area under the ROC curve values was between 0.990-1.000 and 0.722-1.000 in the active and inactive MAR conditions, respectively. The improvement of ROC curve values in active MAR mode was only significant for one of the observers (P = 0.006). CONCLUSION: Activation of MAR improved the diagnostic values of CBCT images in detecting both types of implant-related injuries to the inferior alveolar canal. However, for most observers, this increase was not statistically significant.
Assuntos
Implantes Dentários , Tomografia Computadorizada de Feixe Cônico Espiral , Humanos , Canal Mandibular , Artefatos , Tomografia Computadorizada de Feixe Cônico , AlgoritmosRESUMO
PURPOSE: To assess the impact of endoscope-assisted fractured roots or fragments extraction within the mandibular canal, along with quantitative sensory testing (QST) alterations in the inferior alveolar nerve (IAN). METHODS: Six patients with lower lip numbness following mandibular third molar extraction were selected. All patients had broken roots or fragments within the mandibular canal that were extracted under real-time endoscopic assistance. Follow-up assessments were conducted on postoperative days 1, 7, and 35, including a standardized QST of the lower lip skin. RESULTS: The average surgical duration was 32.5 min, with the IAN exposed in all cases. Two of the patient exhibited complete recovery of lower lip numbness, three experienced symptom improvement, and one patient remained unaffected 35 days after the surgery. Preoperative QST results showed that the mechanical detection and pain thresholds on the affected side were significantly higher than those on the healthy side, but improved significantly by postoperative day 7 in five patients, and returned to baseline in two patients on day 35. There were no significant differences in the remaining QST parameters. CONCLUSIONS: All endoscopic surgical procedures were successfully completed without any additional postoperative complications. There were no cases of deterioration of IAN injury, and lower lip numbness recovered in the majority of cases. Endoscopy allowed direct visualization and examination of the affected nerve, facilitating a comprehensive analysis of the IAN.
Assuntos
Dente Impactado , Traumatismos do Nervo Trigêmeo , Humanos , Estudos Retrospectivos , Hipestesia/complicações , Hipestesia/cirurgia , Canal Mandibular , Traumatismos do Nervo Trigêmeo/etiologia , Mandíbula/cirurgia , Nervo Mandibular , Extração Dentária/efeitos adversos , Extração Dentária/métodos , Dente Serotino/cirurgia , Dente Impactado/cirurgia , Radiografia Panorâmica/métodosRESUMO
OBJECTIVE: To evaluate the influence of metal artefact reduction (MAR) in the diagnosis of dental implant contact with the mandibular canal (MC) using cone beam computed tomography (CBCT). METHODS: Dental implants were installed with surgical guides in the posterior hemiarches of 10 dry human mandibles: 0.5 mm above to the MC cortex (G1/n = 8) and 0.5 mm inside the MC (G2/n = 10). The experimental set-up was scanned with two CBCT equipment using 85 kV and 90 kV, MAR ON or OFF, and different tube currents (4 mA, 8 mA and 10 mA). Two dentomaxillofacial radiologists (DMFRs) and two dentists (DDS) scored the relation between the dental implant and MC. Descriptive statistics were used to observe the absolute frequency of scores. Sensitivity, specificity and accuracy were calculated considering the known relation between the dental implant and the MC interior. McNemar's test (α = .05) was applied to compare the diagnostic efficacy of MAR ON versus MAR OFF. RESULTS: Overall specificity was higher than sensitivity for both DDS and DMFR (97% vs. 50% and 92.0% vs. 78.0% respectively). There was a significant effect of MAR (p = .031) for DMFR in the case of contact between the dental implant with the MC interior, in which sensitivity decreased with MAR activation from 90% to 40%. DMFR observers showed a better diagnostic performance compared with the DDS observers (accuracy of 84.0% and 71.0%, respectively). CONCLUSIONS: Due to the limited efficacy of MAR, it should not be used when conducting CBCT scans for the evaluation of contact between the implant and the mandibular canal.
Assuntos
Implantes Dentários , Processamento de Imagem Assistida por Computador , Humanos , Artefatos , Tomografia Computadorizada de Feixe Cônico/métodos , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Canal MandibularRESUMO
Objective: To analyze differences in the positional relationships between the mandibular third molar (MTM) and the mandibular canal in Korean and Han patients using cone-beam computed tomography (CBCT) and to provide a basis for preoperative risk assessments. Materials and Methods: The CBCT imaging data of 260 Korean and Han patients were collected. The patients' genders, ages, impaction types and depths, relative positions between the MTMs and the mandibular nerve canals, and the shortest distances and shapes at the root tips and cortical bones were all recorded and analyzed. All data were compared using the nonparametric test, ordered logistic regression analysis, a chi-square test, and Fisher's exact test. Results: The relationship between the mandibular canal and the relative position of the MTM differed between Korean and Han patients, mainly in the different types of impactions, and the difference was statistically significant (P < 0.05). The shortest distance between the mesioangular and horizontally impacted mandibular canals and the buccal side of the MTM in Korean patients was less than in Han patients, and the difference was statistically significant (P < 0.05). For horizontal impactions, the probability of cortical bone interruption was 1.980 times greater in Korean patients than in Han patients, and the difference was statistically significant (P < 0.05). The significance threshold was set at 0.05. Conclusion: There are some differences in the positional relationship between the mandibular canal in the MTM region and the rate of cortical bone disruption between Koreans from the Yanbian area and the Hans. This should gain clinical attention.
Assuntos
Canal Mandibular , Dente Serotino , Feminino , Humanos , Masculino , Tomografia Computadorizada de Feixe Cônico/métodos , População do Leste Asiático , Mandíbula/diagnóstico por imagem , Canal Mandibular/diagnóstico por imagem , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgiaRESUMO
OBJECTIVE: During embryogenesis of mandible, the initial ossification centre begins at the bifurcation of the inferior alveolar (IA) and the mental nerves. Additionally, in congenital anomalies like craniofacial microsomia (CFM), the IA canal is completely absent on the microsomic side. These observations led us to hypothesise that there may be a morphological integration between these structures - the IA nerve and the mandibular shapes. Therefore, the primary objective of this study was to test for morphological integration between these structures and the secondary objective was to determine if there were shape variations in these structures among skeletal Classes I, II and III subjects. SETTING AND SAMPLE POPULATION: The sample size of the study is 80 full-head cone-beam computed tomography (CBCT) scans (age 16-56 years). METHODS: We retrieved CBCT scans from our archived database using specific inclusion/exclusion criteria. In the de-identified CBCT scans, traditional coordinate landmarks and sliding semi-landmarks were placed on the mandible and the IA canal (proxy for IA nerve). Using geometric morphometric analyses, we tested integration between the IA canal and the mandibular shapes. We used Procrustes ANOVA to test for overall shape variations among the three skeletal classes (Classes I, II and III). RESULTS: The IA canal and posterior/inferior border of mandible showed strong integration (r-PLS = .845, P = .001). Similar strong integration was also observed between the IA canal and the overall shape of the mandible (r-PLS = .866, P = .001). Additionally, there was a statistically significant variation in overall shape between skeletal Class I and Class II (P = .008) and Class II and Class III (P = .001). CONCLUSIONS: The strong integration between two structures suggests that the IA nerve may play a role in establishing mandibular shape early in development. We posit this may be important in driving mandibular defects seen in CFM, which warrants further investigation.
Assuntos
Síndrome de Goldenhar , Canal Mandibular , Humanos , Adolescente , Adulto Jovem , Adulto , Pessoa de Meia-Idade , Mandíbula/anormalidades , Tomografia Computadorizada de Feixe Cônico , Nervo Mandibular/diagnóstico por imagem , Nervo Mandibular/anatomia & histologiaRESUMO
OBJECTIVES: This study aimed to train deep learning models for recognition of contiguity between the mandibular third molar (M3M) and inferior alveolar canal using panoramic radiographs and to investigate the best effective fold of data augmentation. MATERIALS AND METHODS: The total of 1800 M3M cropped images were classified evenly into contact and no-contact. The contact group was confirmed with CBCT images. The models were trained from three pretrained models: AlexNet, VGG-16, and GoogLeNet. Each pretrained model was trained with the original cropped panoramic radiographs. Then the training images were increased fivefold, tenfold, 15-fold, and 20-fold using data augmentation to train additional models. The area under the receiver operating characteristic curve (AUC) of the 15 models were evaluated. RESULTS: All models recognized contiguity with AUC from 0.951 to 0.996. Ten-fold augmentation showed the highest AUC in all pretrained models; however, no significant difference with other folds were found. VGG-16 showed the best performance among pretrained models trained at the same fold of augmentation. Data augmentation provided statistically significant improvement in performance of AlexNet and GoogLeNet models, while VGG-16 remained unchanged. CONCLUSIONS: Based on our images, all models performed efficiently with high AUC, particularly VGG-16. Ten-fold augmentation showed the highest AUC by all pretrained models. VGG-16 showed promising potential when training with only original images. CLINICAL RELEVANCE: Ten-fold augmentation may help improve deep learning models' performances. The variety of original data and the accuracy of labels are essential to train a high-performance model.
Assuntos
Canal Mandibular , Dente Serotino , Radiografia Panorâmica , Aprendizado Profundo , Canal Mandibular/diagnóstico por imagem , Dente Serotino/diagnóstico por imagem , Radiografia Panorâmica/métodos , Tomografia Computadorizada de Feixe Cônico , HumanosRESUMO
OBJECTIVES: Extraction of impacted mandibular third molars (IMTMs) is the most common surgery performed in the Department of Oral and Maxillofacial Surgery. Inferior alveolar nerve (IAN) injury is a rare but severe complication, and the risk is significantly higher in cases of IMTM near the inferior alveolar canal (IAC). The existing surgical method to extract such IMTMs is either not safe enough or is time-consuming. A better surgical design is needed. MATERIALS AND METHODS: From August 2019 to June 2022, 23 patients underwent IMTM extraction by Dr. Zhao at Nanjing Stomatological Hospital, Affiliated Hospital of Medical School, Nanjing University, and were found to have IMTMs in close proximity to the IAC. Due to high IAN injury risk, these patients underwent coronectomy-miniscrew traction to extract their IMTMs. RESULTS: The time between coronectomy-miniscrew insertion and complete removal of the IMTM was 32.65 ± 2.110 days, which was significantly shorter than that of traditional orthodontic traction. Two-point discrimination testing revealed no IAN injury, and no injury was reported by patients during follow-up. Other complications, such as severe swelling, severe bleeding, dry socket, and limited mouth opening, were not observed. Postoperative pain levels were not significantly higher in the coronectomy-miniscrew traction group than in the traditional IMTM extraction group. CLINICAL RELEVANCE: For IMTMs that are in close proximity to the IAC and must be extracted, coronectomy-miniscrew traction is a novel approach to minimize the risk of IAN injury in a less time-consuming way with a lower possibility of complications.
Assuntos
Dente Impactado , Traumatismos do Nervo Trigêmeo , Humanos , Canal Mandibular , Dente Serotino/cirurgia , Traumatismos do Nervo Trigêmeo/prevenção & controle , Traumatismos do Nervo Trigêmeo/etiologia , Extração Dentária/efeitos adversos , Tração/efeitos adversos , Mandíbula/cirurgia , Dente Impactado/cirurgia , Nervo MandibularRESUMO
This study aimed to evaluate the prevalence and type of mandibular canal branching in a sample of the Iranian population through cone-beam computed tomography (CBCT) images. This cross-sectional study was performed on CBCT records of 300 patients (112 males and 188 females; mean age 30.14 ± 10.96 y). The presence of mandibular canal branch (MCB) was evaluated by reconstructing multiple panoramic views and buccolingual cross-sections, according to Naitoh's classification. The prevalence of MCB, the type of MCB, and the demographic information of all patients were recorded. The maximum number of branching and the maximum type of branching were also registered for each patient. Mandibular canal branching was observed in 131(43.7%) of 300 CBCT images without side or sex differences ( P > 0.05). The most frequent type was dental, followed by the retromolar, forward, and buccolingual types, respectively. There was a statistically higher frequency of retromolar canal in females than in males (odds ratio: 1.14 ± 4.25; P = 0.013). About 46% of patients with MCB had more than one accessory canal and 29% displayed more than one type of MCB. The coincidence of dental and retromolar canals in a patient was the most prevalent combination. Considering the relatively high prevalence of MCB (43.7%), it is recommended to keep in mind the possibility of anatomical variations of the inferior alveolar nerve during dental procedures to avoid postsurgical complications. The high possibility of observing multiple numbers and types of branching in the patients should also be considered during preoperative assessments.
Assuntos
Mandíbula , Canal Mandibular , Humanos , Masculino , Feminino , Adulto Jovem , Adulto , Estudos Transversais , Irã (Geográfico) , Mandíbula/diagnóstico por imagem , Mandíbula/inervação , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
BACKGROUND: This study aimed to analyse the 3D patterns of the mandibular and mental canals (MDC and MC) referring to the surrounding prominent surgical landmarks such as teeth and mental foramen by cone beam computed tomography (CBCT). METHODS: CBCT scans of 354 patients aged 18-67 years with mandibular first premolar to second molar were included and reconstructed 3-dimensionally (3D) by mimics. The parameters of MDC and MC were measured referring to teeth and mental foramen. RESULTS: From the first premolars to the second molars, the mandibular canals showed a trend of gradually closer to the cementoenamel junction (CEJ) of the adjacent teeth and farther away from the buccal cortical plate. The distance of the MDC with the root apexes (RA) was relatively constant from the first premolar to the first molar, but became much closer to the second molar. About 10.8% of the second molars had MDC-RA distances of shorter than 2 mm, and 1.34% even had the MDC superior to the RA. Moreover, the Type III of MC presented in 66.0% of the subjects and had a relatively longer length. Besides, the existence of Type I MC may be related to the MDC featuring with close distances to the RA and CEJ of the adjacent teeth. CONCLUSION: Dentists and surgeons should know the patterns of mandibular and mental canals. A better understanding of the MDC and MC and their relationship to local anatomical landmarks may facilitate the planning of surgeries and alert potential nerve injuries in the operative procedures.
Assuntos
Forame Mentual , Humanos , Canal Mandibular , Mandíbula/diagnóstico por imagem , Dente Molar/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Raiz DentáriaRESUMO
PURPOSE: This study focused on the detailed structure of microvessels of the neurotransmitter-positive vasa nervorum of the inferior alveolar nerve, vein, and artery in the mandibular canal (MC) to obtain information for improved safety in dental treatments. We also observed the detailed structure of the MC from the mental foramen to the mandibular foramen using cone-beam computed tomography (CBCT). METHODS: In this study, mandibles from 45 sides of 23 human cadavers aged 76-104 years were examined by microscopy, immunohistochemistry, and CBCT analysis. These data were further evaluated by principal component analysis (PCA). RESULTS: The microvessels of the vasa nervorum with calcitonin gene-related peptide- and neuropeptide Y-positive reactions were classified into 5 types: large (4.19%, 28/667); irregular large (7.35%, 49/667), numerous intermediate (29.23%, 195/667), irregular intermediate (29.23%, 195/667), and scattered fine (30.0%, 200/667) microvessels. The MC showed various structures from the 3rd molar to the premolars and was also classified into three types, including complete (57.0%, 228/400), partial (33.8%, 135/400), and unclear (9.2%, 37/400), from the mandibular foramen to the mental foramen. PCA results revealed that developed capillaries were mainly localized in the molar region. CONCLUSIONS: Fine microvessels of the vasa nervorum expressing neurotransmitters are present from the molar to premolar region, which is key information for mandibular dental treatments. The different microvessel structures also indicate differences in specific characteristics between dentulous and edentulous cadavers regarding oral surgical and implant treatments.
Assuntos
Canal Mandibular , Tomografia Computadorizada de Feixe Cônico Espiral , Humanos , Mandíbula/diagnóstico por imagem , Mandíbula/anatomia & histologia , Tomografia Computadorizada de Feixe Cônico/métodos , Cadáver , Microvasos/diagnóstico por imagemRESUMO
Sufficient bone volume is necessary for placing a dental implant in an ideal position. To restore severely insufficient bone volume, autogenous block graft procedures with various intraoral donor sites are presented in the literature. The aims of this retrospective study are to present the dimensions and volume of the potential ramus block graft site, and to evaluate possible effect of mandibular canal diameter and its position in relation to mandibular ramus block graft volume. Two-hundred cone-beam computed tomography (CBCT) images were evaluated. The maximum length, width, height, and volume of the potential ramus block graft site, mandibular canal diameter, mandibular canal-mandibular basis distance, and mandibular canal-crest distance were measured. Mandibular canal diameter, mandibular canal-crest distance, and mandibular canal-mandibular basis distance were 3.139 ± 0.446 mm, 15.376 ± 2.562, and 7.834 ± 1.285 mm, respectively. In addition, the dimensions of the potential ramus block graft sites were measured 11.156 ± 2.297 mm × 10.390 ± 3.420 mm × 8.816 ± 1.720 mm (height × length × width). Moreover, the potential ramus bone block volume was calculated as 1.076 ± 0.398 cm3. While a positive correlation was detected between mandibular canal-crest distance and the potential ramus block graft volume (r = .160, P = .025), a negative correlation was found between mandibular canal-mandibular basis distance and the potential ramus block graft volume (r = -.020, P = .001). Mandibular ramus is one of the predictable intraoral donor sites for bone augmentation procedures. However, ramus has some volumetric limitations related to its neighboring anatomic structures. It seems to be important to evaluate lower jaw in a 3-dimensional manner to prevent surgical complications.
Assuntos
Mandíbula , Canal Mandibular , Estudos Retrospectivos , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Implantação Dentária Endóssea/métodosRESUMO
Placement of dental implants has many inherent risks, of which all clinicians must be aware. One of the most important concepts in dental implantology is avoidance of the vital structures present in the human jaws, which can have both immediate as well as long-standing implications. The inferior alveolar nerve (IAN) is one of these vital structures located in the posterior body of the mandible. Invasion of this sensory nerve with a dental implant can result in transient or permanent paresthesia, anesthesia, or dysesthesia. Radiographic imaging is done routinely order to assess the bone volume prior to implant surgery and plan for a safety zone above the IAN. The IAN is contained within the mandibular canal, and this structure is usually visualized during cone-beam computerized tomography (CBCT) scans. The mandibular canal, as it is viewed on CBCT, appears to have a cortical layer of bone protecting the IAN, and clinicians often discuss a bony layer of protection that can be felt by the clinician during osteotomy preparation. The purpose of this research project was to ascertain whether the mandibular canal has continuous or partial remnants of cortical bone lining the roof of the canal or whether the IAN simply travels through spongy, cancellous bone with no cortical bony protection.
Assuntos
Mandíbula , Canal Mandibular , Humanos , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Osso Cortical/diagnóstico por imagem , Nervo Mandibular/diagnóstico por imagemRESUMO
BACKGROUND: This study aims at evaluating the visibility levels of the inferior alveolar canal (IAC) at different mandibular sites using panoramic (conventional & CBCT reformatted) and CBCT coronal views in a sample of a Palestinian population. METHODS: The panoramic (conventional [CP] & CBCT reformatted [CRP]) and CBCT coronal views (CCV) of 103 patients (206 records, right and left sides) were analyzed. The visibility of IAC at five sites extending from the first premolar to the third mandibular molar region was evaluated visually (and compared among the radiographic views) as clearly visible, probably visible, invisible/poorly visible, or not present at the examined site. On CCV, the maximum dimension of the IAC (MD), the vertical distance (VD) between the mandibular cortex and IAC, and the horizontal position (HP) of the IAC were noted. Statistical significance in the differences and relationships of the variables was tested using several statistical tests. RESULTS: There was a statistically significant relationship between the radiography modality (CP, CRP, CCV) and the visibility level of IAC (assessed in scores) at the five mandibular sites. When assessed on CP, CRP, and CCV, the IAC was clearly visible at all sites in 40.4%, 30.9%, and 39.6%, respectively, while being invisible/poorly visible in 27.5%, 38.9%, and 7.2% for the same views, respectively. The mean values of MD and VD were 3.61 mm and 8.48 mm, respectively. CONCLUSION: Different radiographic modalities would characterize the IAC's structure in different qualities. Superior visibility levels were obtained interchangeably using CBCT cross-sectional views and conventional panorama at different sites compared to CBCT reformatted panorama. The IACs visibility was noted to improve at their distal aspects irrespective of the radiographic modality used. Gender -but not age- was a significant factor in the visibility level of IAC at only two mandibular sites.
Assuntos
Canal Mandibular , Dente Impactado , Humanos , Radiografia Panorâmica/métodos , Estudos Retrospectivos , Estudos Transversais , Mandíbula/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Dente SerotinoRESUMO
OBJECTIVES: The objective of this study is to develop a deep learning (DL) model for fast and accurate mandibular canal (MC) segmentation on cone beam computed tomography (CBCT). METHODS: A total of 220 CBCT scans from dentate subjects needing oral surgery were used in this study. The segmentation ground truth is annotated and reviewed by two senior dentists. All patients were randomly splitted into a training dataset (n = 132), a validation dataset (n = 44) and a test dataset (n = 44). We proposed a two-stage 3D-UNet based segmentation framework for automated MC segmentation on CBCT. The Dice Similarity Coefficient (DSC) and 95% Hausdorff Distance (95% HD) were used as the evaluation metrics for the segmentation model. RESULTS: The two-stage 3D-UNet model successfully segmented the MC on CBCT images. In the test dataset, the mean DSC was 0.875 ± 0.045 and the mean 95% HD was 0.442 ± 0.379. CONCLUSIONS: This automatic DL method might aid in the detection of MC and assist dental practitioners to set up treatment plans for oral surgery evolved MC.
Assuntos
Processamento de Imagem Assistida por Computador , Tomografia Computadorizada de Feixe Cônico Espiral , Humanos , Processamento de Imagem Assistida por Computador/métodos , Canal Mandibular , Odontólogos , Papel Profissional , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
The purpose of this study was to automatically classify the three-dimensional (3D) positional relationship between an impacted mandibular third molar (M3) and the inferior alveolar canal (MC) using a distance-aware network in cone-beam CT (CBCT) images. We developed a network consisting of cascaded stages of segmentation and classification for the buccal-lingual relationship between the M3 and the MC. The M3 and the MC were simultaneously segmented using Dense121 U-Net in the segmentation stage, and their buccal-lingual relationship was automatically classified using a 3D distance-aware network with the multichannel inputs of the original CBCT image and the signed distance map (SDM) generated from the segmentation in the classification stage. The Dense121 U-Net achieved the highest average precision of 0.87, 0.96, and 0.94 in the segmentation of the M3, the MC, and both together, respectively. The 3D distance-aware classification network of the Dense121 U-Net with the input of both the CBCT image and the SDM showed the highest performance of accuracy, sensitivity, specificity, and area under the receiver operating characteristic curve, each of which had a value of 1.00. The SDM generated from the segmentation mask significantly contributed to increasing the accuracy of the classification network. The proposed distance-aware network demonstrated high accuracy in the automatic classification of the 3D positional relationship between the M3 and the MC by learning anatomical and geometrical information from the CBCT images.
Assuntos
Canal Mandibular , Dente Serotino , Humanos , Dente Serotino/diagnóstico por imagem , Mandíbula/diagnóstico por imagem , Dente Molar , Língua , Tomografia Computadorizada de Feixe Cônico/métodosRESUMO
OBJECTIVE: To observe the three-dimensional positional relationship between impacted mandibular third molars (IMTMs) and mandibular canal close contacts using cone beam computed tomography (CBCT). METHODS: A total of 101 patients with IMTMs were selected who met the diagnostic criteria for 142 teeth (no bone wall imaging area between IMTMs and the mandibular canal, a high-density bone cortical imaging area only, or a â¦1 mm bone imaging area). The parameters of the rotating CBCT anode were set as follows: 110 kV, 40-50 mA; the focal point and exposure field were set as 0.3 mmh and a high-resolution zoom, respectively; the exposure time and image layer thickness were set as 5.4 s and 0.25 mm. Three-dimensional reconstruction was performed, and the position of the mandibular canal through the IMTM area was observed continuously from the coronal, horizontal and sagittal planes. RESULTS: We found that the mandibular canal was interrupted below the third molar (TM) in 85 cases, accounting for 59.86% of all cases. The mandibular canal was located below the buccal and lingual curvatures in 33 and 19 cases, respectively, accounting for 23.23% and 19%. In addition, a small number of mandibular canals were also located on the buccal side of the mandibular molars (2.82%). We also found one case of direct insertion of the mandibular third molar (MTM) into the mandibular canal. In addition, the mandibular canal passed through the IMTM region with 125 close contacts at the roots (88.03%); 14 mandibular canals were in contact with all teeth and 3 were in contact with the crown. CONCLUSION: The use of CBCT can provide a dynamic and comprehensive understanding of the three-dimensional positional relationship of the mandibular alveolar nerve canal passing through the IMTM area, providing a high clinical reference value when extracting IMTMs and reducing the risk of injury to the inferior alveolar nerve.
Assuntos
Dente Serotino , Dente Impactado , Humanos , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgia , Canal Mandibular , Dente Molar , Mandíbula/diagnóstico por imagem , Dente Impactado/diagnóstico por imagem , Dente Impactado/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Nervo Mandibular/diagnóstico por imagemRESUMO
The clinical issues related to the anatomical variation of the mandibular canal have been extensively analyzed since the 19th century. Evolving dentistry techniques and advancements in the prosthetics forced to collect detailed information about anatomical variations of the mandibular canal due to its neurovascular content. Therefore, its radiographic imaging became an essential part of the oral surgery, in order to avoid complications resulted from an accidental damage of the mandibular canal.
Assuntos
Mandíbula , Canal Mandibular , Humanos , Mandíbula/diagnóstico por imagem , Mandíbula/irrigação sanguínea , Relevância Clínica , Variação AnatômicaRESUMO
Classification of lower Impacted third molars position and their interrelationship with mandibular canal have a great scientific, theoretical and practical importance. An attempt to systematize and classify all anatomical impacted third molars position has been made by many authors. Based on our scientific literature search, we found: 8 impacted third molars classifications, 7 third molars and mandibular canal interposition classifications, as well as 5 classifications of mandibular canal anatomical branching variants. Most classifications are proposed by the author to predict third molar eruption perspective, determine level of operation complexity and prevent mandibular canal damage. New clinical classification development of impacted third molars interrelationship with mandibular canal, which combined the radiological PR, CBCT criteria, neurovascular bundle trauma prognosis, and operative technic choice can be actual.
Assuntos
Dente Serotino , Dente Impactado , Humanos , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgia , Canal Mandibular , Mandíbula/diagnóstico por imagem , Radiografia Panorâmica , Dente Impactado/diagnóstico por imagem , Dente Impactado/cirurgia , Extração Dentária , Nervo MandibularRESUMO
THE PURPOSE: Of the study is to reduce the risk of postoperative neuropathy of the inferior alveolar nerve by improving diagnostic methods, assessment of individual topographic and anatomical features and extraction technique of impacted teeth adjacent to the mandibular canal. MATERIALS AND METHODS: According to the CBCT examination, orthopantomography and macroscopic examination of removed third molars roots (n=140) the relative position of the mandibular canal and the roots of the third molars were studied. RESULTS: Three variants of close mandibular canal and third molars position have been identified. In the lateral and apical nerve position, the root surface depressions were detected. With inter-radicular position fit, the mandibular canal and the nerve bundle form a «bed¼ in between impacted tooth roots. CONCLUSION: The injury of neurovascular bundle prognosis during extraction with an interadicular mandibular position depends on roots anatomy and their convergence degree. If the interradicular distance is less than the diameter of the mandibular canal, nerve injury during tooth extraction is inevitable, in such cases coronectomy is indicated.
Assuntos
Dente Impactado , Traumatismos do Nervo Trigêmeo , Humanos , Canal Mandibular , Dente Serotino/diagnóstico por imagem , Dente Serotino/cirurgia , Traumatismos do Nervo Trigêmeo/diagnóstico por imagem , Traumatismos do Nervo Trigêmeo/etiologia , Traumatismos do Nervo Trigêmeo/prevenção & controle , Dente Impactado/cirurgia , Mandíbula/diagnóstico por imagem , Extração Dentária/efeitos adversos , Nervo Mandibular/diagnóstico por imagemRESUMO
Traditional surgical approaches to the inferior alveolar nerve (IAN) pose a technical challenge and risk iatrogenic damage to healthy, uninvolved nerve tissue. The use of computer-assisted virtual surgical planning and fabrication of surgical guides has shown efficacy in various craniomaxillofacial surgical procedures, and may provide greater precision in accessing the inferior alveolar canal and allow for a more conservative approach. The addition of a depth control feature to a tooth-borne and bone-borne surgical guide, with the use of a standard contra-angle handpiece, provides safe and efficient access for IAN repair. This report describes this novel technique involving a guided transoral approach to the IAN for excision of a neurofibroma of the inferior alveolar nerve, with immediate peripheral nerve allograft IAN reconstruction.