Creating New Antifoulants Using the Tools and Tactics of Medicinal Chemistry.

The unwanted accumulation of marine micro- and macroorganisms such as algae and barnacles on submerged man-made structures and vessel hulls is a major challenge for any marine operation. Known as biofouling, this problem leads to reduced hydrodynamic efficiency, significantly increased fuel usage, microbially induced corrosion, and, if not managed appropriately, eventual loss of both performance and structural integrity. Ship hull biofouling in the international maritime transport network conservatively accounts for 0.6% of global carbon emissions, highlighting the global scale and the importance of this problem. Improved antifouling strategies to limit surface colonization are paramount for essential activities such as shipping, aquaculture, desalination, and the marine renewable energy sector, representing both a multibillion dollar cost and a substantial practical challenge. From an ecological perspective, biofouling is a primary contributor to the global spread of invasive marine species, which has extensive implications for the marine environment.Historically, heavy metal-based toxic biocides have been used to control biofouling. However, their unwanted collateral ecological damage on nontarget species and bioaccumulation has led to recent global bans. With expanding human activities within aquaculture and offshore energy, it is both urgent and apparent that environmentally friendly surface protection remains key for maintaining the function of both moving and stationary marine structures. Biofouling communities are typically a highly complex network of both micro- and macroorganisms, representing a broad section of life from bacteria to macrophytes and animals. Given this diversity, it is unrealistic to expect that a single antifouling "silver bullet" will prevent colonization with the exception of generally toxic biocides. For that reason, modern and future antifouling solutions are anticipated to rely on novel coating technologies and "combination therapies" where mixtures of narrow-spectrum bioactive components are used to provide coverage across fouling species. In contrast to the existing cohort of outdated, toxic antifouling strategies, such as copper- and tributyltin-releasing paints, modern drug discovery techniques are increasingly being employed for the rational design of effective yet safe alternatives. The challenge for a medicinal chemistry approach is to effectively account for the large taxonomic diversity among fouling organisms combined with a lack of well-defined conserved molecular targets within most taxa.The current Account summarizes our work employing the tools of modern medicinal chemistry to discover, modify, and develop optimized and scalable antifouling solutions based on naturally occurring antifouling and repelling compounds from both marine and terrestrial sources. Inspiration for rational design comes from targeted studies on allelopathic natural products, natural repelling peptides, and secondary metabolites from sessile marine organisms with clean exteriors, which has yielded several efficient and promising antifouling leads.

Chlorine Inactivation of Elizabethkingia spp. in Water.

We performed chlorine inactivation experiments for Elizabethkingia anophelis and E. meningoseptica bacterial strains from clinical and environmental sources. Free chlorine concentration × contact time values <0.04 mg·min/L achieved 99.9% inactivation of Elizabethkingia species, indicating chlorine susceptibility. Measures to control biofilm producing pathogens in plumbing are needed to prevent Elizabethkingia bacterial infections.

Outbreak of Invasive Serratia marcescens among Persons Incarcerated in a State Prison, California, USA, March 2020-December 2022.

Serratia marcescens is an environmental gram-negative bacterium that causes invasive disease in rare cases. During 2020-2022, an outbreak of 21 invasive Serratia infections occurred in a prison in California, USA. Most (95%) patients had a history of recent injection drug use (IDU). We performed whole-genome sequencing and found isolates from 8 patients and 2 pieces of IDU equipment were closely related. We also identified social interactions among patients. We recovered S. marcescens from multiple environmental samples throughout the prison, including personal containers storing Cell Block 64 (CB64), a quaternary ammonium disinfectant solution. CB64 preparation and storage conditions were suboptimal for S. marcescens disinfection. The outbreak was likely caused by contaminated CB64 and propagated by shared IDU equipment and social connections. Ensuring appropriate preparation, storage, and availability of disinfectants and enacting interventions to counteract disease spread through IDU can reduce risks for invasive Serratia infections in California prisons.

Better Together: Tandem Mass Spectrometry Achieves up to 50 Times Lower Quantification of 62 Disinfection Byproducts in Drinking Water.

Disinfection byproducts (DBPs) are ubiquitous contaminants present in nearly all drinking water and are associated with adverse health effects in human epidemiologic studies. The most toxic DBPs are unregulated and often occur at concentrations well below regulated DBPs; thus, quantification at low parts-per-trillion (ng/L) levels is critical in assessing exposure. We developed a new liquid-liquid extraction-gas chromatography-tandem mass spectrometry (LLE-GC-MS/MS) method with the first analysis by tandem gas chromatography-mass spectrometry of 23 priority unregulated DBPs including 13 haloacetamides, 3 haloacetic acids, 2 haloacetonitriles, 1 haloacetaldehyde, 2 haloketones, and 2 halonitromethanes. When combined with our previous GC-MS/MS method for haloacetic acids and previously reported MS/MS transitions that we optimized for this method, the analysis of 62 regulated and priority unregulated DBPs at lower quantification limits is achieved. Limits of quantification for most DBPs were between 5 and 30 ng/L with r2 > 0.99 and an average of 9 times lower limits of quantification (LOQs) compared to LLE-GC-MS using selected ion monitoring (SIM). Relative standard deviations ranged from 0.7 to 30% for 61 DBPs in spiked samples. This new method was validated using tap waters from four US cities, where individual DBP concentrations ranged from 5 to 126,882 ng/L. This project provides the most comprehensive GC-MS/MS method for DBP analysis to date and is capable of analyzing volatile and semivolatile DBPs across nine different compound classes, including a class not previously analyzed by GC-MS/MS.

Reproductive & developmental toxicity of quaternary ammonium compounds†.

Quaternary ammonium compounds are a class of chemicals commonly used as disinfectants in household and healthcare settings. Their usage has significantly increased in recent years due to the COVID-19 pandemic. In addition, quaternary ammonium compounds have replaced the recently banned disinfectants triclosan and triclocarban in consumer products. Quaternary ammonium compounds are found in daily antimicrobial and personal care products such as household disinfectants, mouthwash, and hair care products. Due to the pervasiveness of quaternary ammonium compounds in daily use products, humans are constantly exposed. However, little is known about the health effects of everyday quaternary ammonium compound exposure, particularly effects on human reproduction and development. Studies that investigate the harmful effects of quaternary ammonium compounds on reproduction are largely limited to high-dose studies, which may not be predictive of low-dose, daily exposure, especially as quaternary ammonium compounds may be endocrine-disrupting chemicals. This review analyzes recent studies on quaternary ammonium compound effects on reproductive health, identifies knowledge gaps, and recommends future directions in quaternary ammonium compound-related research. Summary Sentence  Quaternary ammonium compounds, a class of disinfecting compounds that have skyrocketed in usage during the COVID-19 pandemic, are emerging as reproductive and developmental toxicants.

Persistence and free chlorine disinfection of human coronaviruses and their surrogates in water.

The coronavirus disease 2019 pandemic illustrates the importance of understanding the behavior and control of human pathogenic viruses in the environment. Exposure via water (drinking, bathing, and recreation) is a known route of transmission of viruses to humans, but the literature is relatively void of studies on the persistence of many viruses, especially coronaviruses, in water and their susceptibility to chlorine disinfection. To fill that knowledge gap, we evaluated the persistence and free chlorine disinfection of human coronavirus OC43 (HCoV-OC43) and its surrogates, murine hepatitis virus (MHV) and porcine transmissible gastroenteritis virus (TGEV), in drinking water and laboratory buffer using cell culture methods. The decay rate constants of human coronavirus and its surrogates in water varied, depending on virus and water matrix. In drinking water without disinfectant addition, MHV showed the largest decay rate constant (estimate ± standard error, 2.25 ± 0.09 day-1) followed by HCoV-OC43 (0.99 ± 0.12 day-1) and TGEV (0.65 ± 0.06 day-1), while in phosphate buffer without disinfectant addition, HCoV-OC43 (0.51 ± 0.10 day-1) had a larger decay rate constant than MHV (0.28 ± 0.03 day-1) and TGEV (0.24 ± 0.02 day-1). Upon free chlorine disinfection, the inactivation rates of coronaviruses were independent of free chlorine concentration and were not affected by water matrix, though they still varied between viruses. TGEV showed the highest susceptibility to free chlorine disinfection with the inactivation rate constant of 113.50 ± 7.50 mg-1 min-1 L, followed by MHV (81.33 ± 4.90 mg-1 min-1 L) and HCoV-OC43 (59.42 ± 4.41 mg-1 min-1 L). IMPORTANCE: This study addresses an important knowledge gap on enveloped virus persistence and disinfection in water. Results have immediate practical applications for shaping evidence-based water policies, particularly in the development of disinfection strategies for pathogenic virus control.

Investigations of microbial adaptation to singular, binary, and fully formulated quaternary ammonium compounds.

The study was conducted to inform risk assessments concerning microbial exposure to quaternary ammonium biocides (QUATs) by investigating their effects on 10 microbial strains of hygiene relevance. Biocides were divided into three categories: simple aqueous solutions, biocide mixtures, and formulated biocides. Organisms were grown in the presence of biocides for 10 generations and then subsequently for another 10 generations in biocide-free media. Control organisms were passaged 20 times in biocide-free media. Strains were then assessed for biocide and antibiotic susceptibility, changes in growth dynamics, and single nucleotide polymorphisms (SNPs). Biocide mixtures demonstrated greater antimicrobial potency than singular and formulated biocides. Susceptibility changes of under twofold were observed for all biocides tested. Susceptibility decreased significantly for organisms passaged with singular biocides (1.29- to 4.35-fold) and biocide mixtures (1.4- to 1.5-fold), but not for formulated biocides (1.3- to 1.84-fold) compared to controls. Antibiotic susceptibility both increased and decreased in passaged organisms, with heightened susceptibility occurring more frequently in the singular biocide group. Changes in susceptibility and growth dynamics were similar in the passaged and unexposed controls for fitness measures of adapted bacteria; there were no significant differences between biocide groups, but significantly lower generation and doubling times in organisms exposed to singular biocides. Similar frequencies in SNPs occurred for the three biocide groups and unexposed controls. While some adaptations occurred, particularly with singular biocides, the impact on antibiotic resistance and genomic mutations was limited. These findings suggest that the use of formulated QUATs may pose a comparatively lower risk for antimicrobial resistance.IMPORTANCEBiocides are used globally to control microbial growth and effective assessment of the risks and benefits of their use is therefore a high priority. Much of the data used to assess risk has been based on sub-lethal exposure of bacteria to singular biocides in simple aqueous solutions. This work builds on limited prior realism-based studies to demonstrate enhanced potency in biocidal mixtures; the mitigation of resistance selection by formulations and inconsistent cross-resistance effects with both increases and decreases in susceptibility for a wide range of antibiotics. These data can be used to better inform risk assessments of biocide deployment.

Sanitization of hydroponic farming facilities in Singapore: what, why, and how.

This study performed microbial analysis of nutrient film technique (NFT) hydroponic systems on three indoor farms in Singapore (the "what"). To justify the necessity of sanitizing hydroponic systems, strong biofilm-forming bacteria were isolated from the facility and investigated for their influence on Salmonella colonization on polyvinyl chloride (PVC) coupons in hydroponic nutrient solutions (the "why"). Finally, sanitization solutions were evaluated with both laboratory-scale and field-scale tests (the "how"). As a result, the microbiome composition in NFT systems was found to be highly farm specific. The strong biofilm formers Corynebacterium tuberculostearicum C2 and Pseudoxanthomonas mexicana C3 were found to facilitate the attachment and colonization of Salmonella on PVC coupons. When forming dual-species biofilms, the presence of C2 and C3 also significantly promoted the growth of Salmonella (P < 0.05). Compared with hydrogen peroxide (H2O2) and sodium percarbonate (SPC), sodium hypochlorite (NaOCl) exhibited superior efficacy in biofilm removal. At 50 ppm, NaOCl reduced the Salmonella Typhimurium, C2, and C3 counts to <1 log CFU/cm2 within 12 h, whereas neither 3% H2O2 nor 1% SPC achieved this effect. In operational hydroponic systems, the concentration of NaOCl needed to achieve biofilm elimination increased to 500 ppm, likely due to the presence of organic matter accumulated during crop cultivation and the greater persistence of naturally formed multispecies biofilms. Sanitization using 500 ppm NaOCl for 12 h did not impede subsequent plant growth, but chlorination byproduct chlorate was detected at high levels in the hydroponic solution and in plants in the sanitized systems without rinsing. IMPORTANCE: This study's significance lies first in its elucidation of the necessity of sanitizing hydroponic farming systems. The microbiome in hydroponic systems, although mostly nonpathogenic, might serve as a hotbed for pathogen colonization and thus pose a risk for food safety. We thus explored sanitization solutions with both laboratory-scale and field-scale tests. Of the three tested sanitizers, NaOCl was the most effective and economical option, whereas one must note the vital importance of rinsing the hydroponic systems after sanitization with NaOCl.

Source-to-tap investigation of the occurrence of nontuberculous mycobacteria in a full-scale chloraminated drinking water system.

Nontuberculous mycobacteria (NTM) in drinking water are a significant public health concern. However, an incomplete understanding of the factors that influence the occurrence of NTM in drinking water limits our ability to characterize risk and prevent infection. This study sought to evaluate the influence of season and water treatment, distribution, and stagnation on NTM in drinking water. Samples were collected source-to-tap in a full-scale, chloraminated drinking water system approximately monthly from December 2019 to November 2020. NTM were characterized using culture-dependent (plate culture with matrix-assisted laser desorption ionization-time-of-flight mass spectrometry [MALDI-TOF MS] isolate analysis) and culture-independent methods (quantitative PCR and genome-resolved metagenomics). Sampling locations included source waters, three locations within the treatment plant, and five buildings receiving water from the distribution system. Building plumbing samples consisted of first draw, 5-min flush, and full flush cold-water samples. As the study took place during the COVID-19 pandemic, the influence of reduced water usage in three of the five buildings was also investigated. The highest NTM densities source-to-tap were found in the summer first draw building water samples (107 gene copies/L), which also had the lowest monochloramine concentrations. Flushing was found to be effective for reducing NTM and restoring disinfectant residuals, though flush times necessary to improve water quality varied by building. Clinically relevant NTM species, including Mycobacterium avium, were recovered via plate culture, with increased occurrence observed in buildings with higher water age. Four of five NTM metagenome-assembled genomes were identified to the species level and matched identified isolates.IMPORTANCENTM infections are increasing in prevalence, difficult to treat, and associated with high morbidity and mortality rates. Our lack of understanding of the factors that influence NTM occurrence in drinking water limits our ability to prevent infections, accurately characterize risk, and focus remediation efforts. In this study, we comprehensively evaluated NTM in a full-scale drinking water system, showing that various steps in treatment and distribution influence NTM presence. Stagnant building water contained the highest NTM densities source-to-tap and was associated with low disinfectant residuals. We illustrated the differences in NTM detection and characterization obtained from culture-based and culture-independent methods, highlighting the complementarity between these approaches. We demonstrated that focusing NTM mitigation efforts in building plumbing systems, which have the highest NTM densities source-to-tap, has potential for immediate positive effects. We also identified steps during treatment that increase NTM levels, which provides beneficial information for utilities seeking to reduce NTM in finished water.

Efficacy of three EPA-registered antimicrobials and steam against two human norovirus surrogates on nylon carpets with two backing types.

Carpet cleaning guidelines currently do not include the use of an antimicrobial, except after a bodily fluid event. To address this gap, we compared the efficacy of three antimicrobials-two hydrogen peroxide-based (H2O2) products (A and B) and one chlorine-based product (C)-and a steam treatment against two norovirus surrogates, specifically feline calicivirus (FCV) and Tulane virus (TuV). These tests were performed on nylon carpets with either water-permeable or waterproof backing types. The effect of repeated antimicrobial use on carpet properties was also evaluated. For a carpet with water-permeable backing, products A, B, and C achieved a 0.8, 3.1, and 0.9 log10 PFU/coupon reduction of FCV and 0.3, 2.5, and 0.4 log10 TCID50/coupon reduction of TuV, respectively, following a 30 min contact time. For carpet with waterproof backing, only product B achieved a 5.0 log10 PFU/coupon reduction of FCV and >3.0 log10 TCID50/coupon reduction of TuV, whereas products A and C achieved a 2.4 and 1.6 log10 PFU/coupon reduction of FCV and a 1.2 and 1.2 log10 TCID50/coupon reduction of TuV, respectively. Steam treatment achieved a ≥ 5.2 log10 PFU/coupon reduction of FCV and a > 3.2 log10 TCID50/coupon reduction of TuV in 15 seconds on the carpet with both backing types. The repeated use of products A and B decreased the tensile strength of the carpet backing, while use of product B resulted in cracks on carpet fibers. Overall, steam treatment for 15 seconds was efficacious on both carpet types, but only product B achieved efficacy after a 30-minute exposure on the carpet with waterproof backing.IMPORTANCECarpets are common in long-term care facilities, despite its potential as a vehicle for transmission of agents associated with healthcare-associated infections, including human norovirus (NoV). Presently, our understanding of carpet disinfection is limited; hence, there are no commercial antimicrobials against norovirus available for use on carpets. Our findings showed that steam treatment, which minimally affected the properties of carpet fibers and backing, was more efficacious against human norovirus surrogates on carpets compared to the three chemical antimicrobials tested. Additionally, the two surrogates were more sensitive to chemical antimicrobials on the carpet with waterproof backing compared to carpets with water-permeable backing. These findings can inform development of antimicrobials for use on carpets contaminated with human norovirus.

Phenotypic and genotypic determination of resistance to common disinfectants among strains of Acinetobacter baumannii producing and non-producing biofilm isolated from Iran.

BACKGROUND: Nosocomial infections are a global problem in hospitals all around the world. It is considered a major health problem, especially in developing countries. The increase in the patient's stay in hospitals has increased the mortality rate, and consequently, the costs drastically increase. The main purpose of using disinfectants in the hospital environment is to reduce the risk of nosocomial infections. Ethylene diamine tetra acetic acid (EDTA) causes lysis and increases susceptibility to antimicrobial agents in the planktonic form of bacteria. This substance affects the permeability of the outer membrane of bacteria. It also prevents the formation of biofilms by bacteria. MATERIALS AND METHODS: In the current study, 120 isolates of Acinetobacter baumannii (A. baumannii) were confirmed by phenotypic and genotypic methods. Antibiogram was performed and then the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of isolates against 5% sodium hypochlorite, ethanol %70, sayasept-HP 2%, chlorhexidine 2%, dettol 4/8% were evaluated. In addition, the disinfectant effect was re-evaluated with the mixture of EDTA solution. All isolates were examined for biofilm presence by crystal violet staining method in triplicates and repeated three times for each strain. Also for all isolates detection of efflux pump genes (Qac-E, qacE-Δ1, SUG-E) by PCR technique was done. RESULTS: Antibiogram results of A. baumannii showed that 6.7% were Multi-drug-resistant (MDR), and 89.2% were Extensively drug-resistant (XDR) isolates. The highest effect of disinfectants was related to 5% sodium hypochlorite, and the least effect was 70% ethanol. EDTA increases the efficacy of selected disinfectants significantly. The highest prevalence of the efflux pump genes was related to SUG-E (95%) and Qac-E (91.7%), and, the qacE-Δ1 gene with 12.5%. The biofilm production rate was 91.3% among all isolates. CONCLUSION: The best and safest way to disinfect hospital floors and surfaces is to choose the right disinfectants, and learn how to use them properly. In this study, a mixture of disinfectants and EDTA had a significant effect on bactericidal activity. it was found that improper use of disinfectants, especially the use of sub-inhibitory dilutions, increases the resistance of bacteria to disinfectants.

Chemical inactivation of two non-enveloped viruses results in distinct thermal unfolding patterns and morphological alterations.

BACKGROUND: Non-enveloped viruses, which lack a lipid envelope, display higher resistance to disinfectants, soaps and sanitizers compared to enveloped viruses. The capsids of these viruses are highly stable and symmetric protein shells that resist inactivation by commonly employed virucidal agents. This group of viruses include highly transmissible human pathogens such as Rotavirus, Poliovirus, Foot and Mouth Disease Virus, Norovirus and Adenovirus; thus, devising appropriate strategies for chemical disinfection is essential. RESULTS: In this study, we tested a mild, hypoallergenic combination of a denaturant, alcohol, and organic acid (3.2% citric acid, 1% urea and 70% ethanol, pH4) on two representative non-enveloped viruses - Human Adenovirus 5 (HAdV5) and Feline Calicivirus (FCV)- and evaluated the pathways of capsid neutralization using biophysical methods. The conformational shifts in the capsid upon chemical treatment were studied using Differential Scanning Calorimetry (DSC), while the morphological alterations were visualized concurrently using Transmission Electron Microscopy (TEM). We found that while treatment of purified HAdV5 particles with a formulation resulted in thermal instability and, large scale aggregation; similar treatment of FCV particles resulted in complete collapse of the capsids. Further, while individual components of the formulation caused significant damage to the capsids, a synergistic action of the whole formulation was evident against both non-enveloped viruses tested. CONCLUSIONS: The distinct effects of the chemical treatment on the morphology of HAdV5 and FCV suggests that non-enveloped viruses with icosahedral geometry can follow different morphological pathways to inactivation. Synergistic effect of whole formulation is more effective compared to individual components. Molecular level understanding of inactivation pathways may result in the design and development of effective mass-market formulations for rapid neutralization of non-enveloped viruses.

Screening of the global health priority BoxⓇ reveals potential new disinfectants against the emerging multidrug-resistant pathogen Candida auris.

BACKGROUND: Candida auris has been identified by the World Health Organization as a critical pathogen due to its invasive nature, resistance to multiple drugs, and high mortality rates in hospital outbreaks. This fungus can persist on surfaces and human skin for extended periods, complicating infection control efforts. The need for effective disinfection strategies is urgent, as current disinfectants are often ineffective against C. auris biofilms. OBJECTIVE: The study aimed to identify potential disinfectants from a collection of 240 compounds in the Global Health Priority Box® that are effective against C. auris, particularly strains resistant to existing options. METHODS: The research employed a screening protocol using a fluconazole-resistant strain of C. auris (149/23). Antifungal activity was assessed using the microdilution method to determine Minimum Inhibitory Concentrations (MICs) and Minimum Fungicidal Concentrations (MFCs). Additional assays were conducted to evaluate biofilm inhibition, biofilm eradication, cell membrane integrity, nucleotide leakage, sorbitol protection assay, efflux pump inhibition, and hemolysis assay. RESULTS: Two compounds, Hydramethylnon (MMV1577471) and Flufenerim (MMV1794206), demonstrated significant inhibitory effects against C. auris. Hydramethylnon exhibited potent antifungal activity, inhibiting up to 93 % of fungal growth with an MFC of 16 µg/mL. Flufenerim inhibited up to 58 % of fungal growth, showing fungistatic action with an MFC greater than 4 µg/mL. Biofilm inhibition tests showed that both compounds significantly inhibited biofilm formation, with increased efficacy at higher concentrations. Both compounds showed eradication rates in both stages. Furthermore, Hydramethylnon and Flufenerim did not affect cell membrane integrity or nucleotide leakage, suggesting a mode of action not reliant on disrupting these cellular components. The sorbitol protection assay revealed that neither compound caused cell wall damage. In the efflux pump inhibition assay, Hydramethylnon did not activate efflux pumps, while Flufenerim activated efflux pumps, reducing its effectiveness. Hemocompatibility assay showed safety. CONCLUSION: The study highlights Hydramethylnon and Flufenerim as promising candidates for further development as disinfectants, offering potential solutions to the urgent need for effective disinfection agents against C. auris. The findings underscore the value of screening compound collections to identify novel antifungal agents and understand their mechanisms of action, thereby contributing to the advancement of new disinfection strategies in healthcare settings.

The effects of pen ink and surface disinfectants on red blood cells stored in plasticized polyvinylchloride transfusion bags.

BACKGROUND: Each unit of red blood cells (RBCs) produced represents a significant cost to the healthcare system. Unnecessary blood wastage should be minimized. In clinical settings, alterations to blood component bags after issue from the protected setting of the blood bank include pen markings, and those that are exposed to an infectious environment require surface disinfecting. These units may be discarded due to unclear effects on RBC quality. In this study, we investigate whether pen markings or surface disinfection negatively affects the quality of packed RBCs and whether pen ink diffuses through the blood bag. STUDY DESIGN AND METHODS: RBC bags were marked with pens (water, oil, or alcohol-based) or subjected to surface disinfection (ethanol, hydrogen peroxide [Preempt wipes], or benzalkonium chloride-based wipes [CaviWipes]) and sampled 24 h after applying the treatment and at day 42 post collection (n = 3 for each condition). The samples were analyzed for RBC in vitro quality markers. The presence of any ink in the RBC bags was investigated using mass spectrometry (n = 2). RESULTS: Data from 24 h and day 42 time points indicated no differences in RBC count, mean corpuscular volume, morphology, deformability, potassium content, or hemolysis for either pen markings or disinfectants when compared with their untreated controls (p > .05). No trace of ink was detected inside the bag. CONCLUSION: RBC units marked with ballpoint, gel, or Sharpie pens do not suffer a loss of in vitro quality, nor do RBC units which have been surface disinfected with 70% ethanol, Preempt wipes or CaviWipes.

Persistence of two coronaviruses and efficacy of steam vapor disinfection on two types of carpet.

BACKGROUND: Coronaviruses, a group of highly transmissible and potentially pathogenic viruses, can be transmitted indirectly to humans via fomites. To date, no study has investigated their persistence on carpet fibers. Establishing persistence is essential before testing the efficacy of a disinfectant. METHODS: The persistence of BCoV and HCoV OC43 on polyethylene terephthalate (PET) and nylon carpet was first determined using infectivity and RT-qPCR assays. Then, the disinfectant efficacy of steam vapor was evaluated against both coronaviruses on nylon carpet. RESULTS: Immediately after inoculation of carpet coupons, 32.50% of BCoV and 3.87% of HCoV OC43 were recovered from PET carpet, compared to 34.86% of BCoV and 24.37% of HCoV OC43 recovered from nylon carpet. After incubation at room temperature for 1 h, BCoV and HCoV OC43 showed a 3.6 and > 2.8 log10 TCID50 reduction on PET carpet, and a 0.6 and 1.8 log10 TCID50 reduction on nylon carpet. Based on first-order decay kinetics, the whole gRNA of BCoV and HCoV OC43 were stable with k values of 1.19 and 0.67 h- 1 on PET carpet and 0.86 and 0.27 h- 1 on nylon carpet, respectively. A 15-s steam vapor treatment achieved a > 3.0 log10 TCID50 reduction of BCoV and > 3.2 log10 TCID50 reduction of HCoV OC43 on nylon carpet. CONCLUSION: BCoV was more resistant to desiccation on both carpet types than HCoV OC43. Both viruses lost infectivity quicker on PET carpet than on nylon carpet. Steam vapor inactivated both coronaviruses on nylon carpet within 15 s.

A systematic overview of metal nanoparticles as alternative disinfectants for emerging SARS-CoV-2 variants.

Coronaviruses are a diverse family of viruses, and new strains can emerge. While the majority of coronavirus strains cause mild respiratory illnesses, a few are responsible for severe diseases such as Severe Acute Respiratory Syndrome (SARS) and Middle East Respiratory Syndrome (MERS). SARS-CoV-2, the virus responsible for COVID-19, is an example of a coronavirus that has led to a pandemic. Coronaviruses can mutate over time, potentially leading to the emergence of new variants. Some of these variants may have increased transmissibility or resistance to existing vaccines and treatments. The emergence of the COVID-19 pandemic in the recent past has sparked innovation in curbing virus spread, with sanitizers and disinfectants taking center stage. These essential tools hinder pathogen dissemination, especially for unvaccinated or rapidly mutating viruses. The World Health Organization supports the use of alcohol-based sanitizers and disinfectants globally against pandemics. However, there are ongoing concerns about their widespread usage and their potential impact on human health, animal well-being, and ecological equilibrium. In this ever-changing scenario, metal nanoparticles hold promise in combating a range of pathogens, including SARS-CoV-2, as well as other viruses such as norovirus, influenza, and HIV-1. This review explores their potential as non-alcoholic champions against SARS-CoV-2 and other pandemics of tomorrow. This extends beyond metal nanoparticles and advocates a balanced examination of pandemic control tools, exploring their strengths and weaknesses. The manuscript thus involves the evaluation of metal nanoparticle-based alternative approaches as hand sanitizers and disinfectants, providing a comprehensive perspective on this critical issue.

Application of chlorine dioxide and its disinfection mechanism.

Chlorine dioxide (ClO2) is a strong oxidizing agent and an efficient disinfectant. Due to its broad-spectrum bactericidal properties, good inactivation effect on the vast majority of bacteria and pathogenic microorganisms, low resistance to drugs, and low generation of halogenated by-products, chlorine dioxide is widely used in fields such as water purification, food safety, medical and public health, and living environment. This review introduced the properties and application status of chlorine dioxide, compared the action mode, advantages and disadvantages of various disinfectants. The mechanism of chlorine dioxide inactivating bacteria, fungi and viruses were reviewed. The lethal target of chlorine dioxide to bacteria and fungi is to destroy the structure of cell membrane, change the permeability of cell membrane, and make intracellular substances flow out, leading to their death. The lethal targets for viruses are the destruction of viral protein capsids and the degradation of RNA fragments. The purpose of this review is to provide more scientific guidance for the application of chlorine dioxide disinfectants.

Effect of household pipe materials on formation and chlorine resistance of the early-stage biofilm: various interspecific interactions exhibited by the same microbial biofilm in different pipe materials.

Microbial community biofilm exists in the household drinking water system and would pose threat to water quality. This paper explored biofilm formation and chlorination resistance of ten dual-species biofilms in three typical household pipes (stainless steel (SS), polypropylene random (PPR), and copper), and investigated the role of interspecific interaction. Biofilm biomass was lowest in copper pipes and highest in PPR pipes. A synergistic or neutralistic relationship between bacteria was evident in most biofilms formed in SS pipes, whereas four groups displayed a competitive relationship in biofilms formed in copper pipe. Chlorine resistance of biofilms was better in SS pipes and worse in copper pipes. It may be helped by interspecific relationships, but was more dependent on bacteria and resistance mechanisms such as more stable extracellular polymeric substance. The corrosion sites may also protect bacteria from chlorination. The findings provide useful insights for microbial control strategies in household drinking water systems.

Active-bromide and surfactant synergy for enhanced microfouling control.

Biofilms are structured microbial communities encased in a matrix of self-produced extracellular polymeric substance (EPS) and pose significant challenges in various industrial cooling systems. A nuclear power plant uses a biocide active-bromide for control of biological growth in its condenser cooling system. This study is aimed at evaluating the anti-bacterial and anti-biofilm efficacy of active-bromide against planktonic and biofilm-forming bacteria that are commonly encountered in seawater cooling systems. The results demonstrated that active-bromide at the concentration used at the power plant (1 ppm) exhibited minimal killing activity against Pseudomonas aeruginosa planktonic cells. The bacterial cell surface hydrophobicity assay using Staphylococcus aureus and P. aeruginosa indicated that Triton-X 100 significantly decreased the hydrophobicity of planktonic cells, enhancing the susceptibility of the cells to active-bromide. Biofilm inhibition assays revealed limited efficacy of active-bromide at 1 ppm concentration, but significant inhibition at 5 ppm and 10 ppm. However, the addition of a surfactant, Triton-X 100, in combination with 1 ppm active-bromide displayed a synergistic effect, leading to significant biofilm dispersal of pre-formed P. aeruginosa biofilms. This observation was substantiated by epifluorescence microscopy using a live/dead bacterial assay that showed the combination treatment resulted in extensive cell death within the biofilm, as indicated by a marked increase in red fluorescence, compared to treatments with either agent alone. These findings suggest that active bromide alone may be insufficient for microfouling control in the seawater-based condenser cooling system of the power plant. Including a biocompatible surfactant that disrupts established biofilms (microfouling) can significantly improve the efficacy of active bromide treatment.

Cleaning protocols in forensic genetic laboratories.

It is pivotal to avoid cross-sample contamination in forensic genetic laboratories and optimal cleaning protocols for the removal of DNA are essential. A survey was performed, and ten forensic genetic laboratories shared their cleaning protocols in pre-PCR and post-PCR laboratories. The cleaning frequencies on different surface areas were somewhat similar, whereas none of the laboratories used the same cleaning reagents. Therefore, the efficiencies of the cleaning protocol utilised were tested and compared. The results showed that freshly made household bleach and Virkon® removed all amplifiable DNA from the surfaces, whereas DNA AWAY™ and the disinfection reagents ethanol, isopropanol, and ChemGene HLD4L did not.