Solution and gaseous phase sensing of formaldehyde with economical triphenylmethane based sensors: a tool to estimate formaldehyde content in stored fish samples.

The use of formalin to preserve raw food items such as fish, meat, vegetables etc. is very commonly practiced in the present day. Also, formaldehyde (FA), which is the main constituent of formalin solution, is known to cause serious health issues on exposure. Considering the ill effects of formaldehyde, herein we report synthesis of highly sensitive triphenylmethane based formaldehyde (FA) sensors from a single step reaction of inexpensive reagents namely 4-hydroxy benzaldehyde and 2,6-dimethyl phenol. The synthetic method also provides highly pure product in bulk quantity. The analytical activity of the triphenylmethane sensor 1 with a limit of detection (LOD) value of 2.31 × 10-6 M for FA was significantly enhanced through induced deprotonation and thereafter a LOD value of 1.82 × 10-8 M could be achieved. To the best of our knowledge, the LOD value of the deprotonated form (sensor 2) for FA was superior to those of all the FA optical sensors reported so far. The mechanism of sensing was demonstrated by 1H-NMR titration and recording mass spectra before and after addition of FA to a solution of sensor 2. Both sensor 1 and sensor 2 exhibit quenching in emission upon addition of FA. A fluorescence study also demonstrates enhancement in analytical activity of the sensor upon induced deprotonation. Then the sensor was effectively immobilized into a hydrophilic and biocompatible starch-PVA polymer matrix which enabled detection of FA in a 100% aqueous system reversibly. Again, quick and effective sensing of FA in real food samples (stored fish) with the help of a computational application was demonstrated. The sensors have significant practical applicability as they effectively detect FA in real food samples qualitatively and quantitatively.

Fluorescent probes for formaldehyde based on formaldehyde-promoted C-N cleavage of azanyl carbamates.

Formaldehyde (FA) is an endogenous one-carbon metabolite and an environmental pollutant and carcinogen. Elevated FA levels are associated with many diseases. Methods for the convenient and in situ detection of FA levels are of great significance for understanding FA's biofunctions and signalling pathways. Herein, the NAP-FAP2 series of fluorescent probes for FA detection were developed based on FA-promoted C-N cleavage of 3-nitrophenylazanyl N-arylcarbamate via FA-induced intramolecularity, where the aryl group is the fluorophore 1,8-naphthalimide-4-yl. The 3-nitrophenylazanyl containing reactive group also functions as a fluorescence quenching group via a photo-induced electron transfer mechanism to generate turn-on fluorescence response upon reaction with FA. The probes were applied to explore FA level changes in erastin-induced ferroptosis, and it was found that the FA level increases intracellularly, but not in the endoplasmic reticulum, suggesting that the FA level increases in ferroptosis are not derived from lipid peroxidation.

Formaldehyde Exposure Racial Disparities in Southeast Texas.

Formaldehyde (HCHO) exposures during a full year were calculated for different race/ethnicity groups living in Southeast Texas using a chemical transport model tagged to track nine emission categories. Petroleum and industrial emissions were the largest anthropogenic sources of HCHO exposure in Southeast Texas, accounting for 44% of the total HCHO population exposure. Approximately 50% of the HCHO exposures associated with petroleum and industrial sources were directly emitted (primary), while the other 50% formed in the atmosphere (secondary) from precursor emissions of reactive compounds such as ethylene and propylene. Biogenic emissions also formed secondary HCHO that accounted for 11% of the total population-weighted exposure across the study domain. Off-road equipment contributed 3.7% to total population-weighted exposure in Houston, while natural gas combustion contributed 5% in Beaumont. Mobile sources accounted for 3.7% of the total HCHO population exposure, with less than 10% secondary contribution. Exposure disparity patterns changed with the location. Hispanic and Latino residents were exposed to HCHO concentrations +1.75% above average in Houston due to petroleum and industrial sources and natural gas sources. Black and African American residents in Beaumont were exposed to HCHO concentrations +7% above average due to petroleum and industrial sources, off-road equipment, and food cooking. Asian residents in Beaumont were exposed to HCHO concentrations that were +2.5% above average due to HCHO associated with petroleum and industrial sources, off-road vehicles, and food cooking. White residents were exposed to below average HCHO concentrations in all domains because their homes were located further from primary HCHO emission sources. Given the unique features of the exposure disparities in each region, tailored solutions should be developed by local stakeholders. Potential options to consider in the development of those solutions include modifying processes to reduce emissions, installing control equipment to capture emissions, or increasing the distance between industrial sources and residential neighborhoods.

Quantification of Byproduct Formation from Portable Air Cleaners Using a Proposed Standard Test Method.

In response to the COVID-19 pandemic, air cleaning technologies were promoted as useful tools for disinfecting public spaces and combating airborne pathogen transmission. However, no standard method exists to assess the potentially harmful byproduct formation from air cleaners. Through a consensus standard development process, a draft standard test method to assess portable air cleaner performance was developed, and a suite of air cleaners employing seven different technologies was tested. The test method quantifies not only the removal efficiency of a challenge chemical suite and ultrafine particulate matter but also byproduct formation. Clean air delivery rates (CADRs) are used to quantify the chemical and particle removal efficiencies, and an emission rate framework is used to quantify the formation of formaldehyde, ozone, and other volatile organic compounds. We find that the tested photocatalytic oxidation and germicidal ultraviolet light (GUV) technologies produced the highest levels of aldehyde byproducts having emission rates of 202 and 243 µg h-1, respectively. Additionally, GUV using two different wavelengths, 222 and 254 nm, both produced ultrafine particulate matter.

Exposure and health risk assessment of volatile organic compounds among drivers and passengers in long-distance buses.

Exposure to volatile organic compounds (VOCs) such as benzene, toluene, ethylbenzene, xylene, and formaldehyde from long-distance buses has been reported to adversely affect human health. This study investigates the concentrations of these five VOCs and evaluates their health risks to drivers and passengers on board. Ten trips from Taipei to Taichung were performed during the warm and cold seasons of 2021-2022. Two locations inside the bus were established to collect air samples by a 6-liter canister for drivers and passengers. Exposure concentrations of benzene, toluene, ethylbenzene, and xylene were analyzed via gas chromatography with a flame ionization detector and the formaldehyde concentration was monitored using a formaldehyde meter. Subsequently, a Monte Carlo simulation was conducted to evaluate the carcinogenic and non-carcinogenic risks of the five VOCs. Formaldehyde emerged as the highest detected compound (9.06 ± 3.77 µg/m3), followed by toluene (median: 6.11 µg/m3; range: 3.86-14.69 µg/m3). In particular, formaldehyde was identified to have the significantly higher concentration during non-rush hours (10.67 ± 3.21 µg/m3) than that during rush hours (7.45 ± 3.41 µg/m3) and during the warm season (10.71 ± 2.97 µg/m3) compared with that during the cold season (7.41 ± 4.26 µg/m3). Regarding non-carcinogenic risks to drivers and passengers, the chronic hazard indices for these five VOCs were under 1 to indicate an acceptable risk. In terms of carcinogenic risk, the median risks of benzene and formaldehyde for drivers were 2.88 × 10-6 (95% confidence interval [CI]: 2.11 × 10-6 - 5.13 × 10-6) and 1.91 × 10-6 (95% CI: 4.54 × 10-7 - 3.44 × 10-6), respectively. In contrast, the median carcinogenic risks of benzene and formaldehyde for passengers were less than 1 × 10-6 to present an acceptable risk. This study suggests that benzene and formaldehyde may present carcinogenic risks for drivers. Moreover, the non-carcinogenic risk for drivers and passengers is deemed acceptable. We recommended that the ventilation frequency be increased to mitigate exposure to VOCs in long-distance buses.

Residential exposure to air pollution and incidence of leukaemia in the industrial area of Viadana, Northern Italy.

BACKGROUND: Exposure to air pollution has been proposed as one of the potential risk factors for leukaemia. Work-related formaldehyde exposure is suspected to cause leukaemia. METHODS: We conducted a nested register-based case-control study on leukaemia incidence in the Viadana district, an industrial area for particleboard production in Northern Italy. We recruited 115 cases and 496 controls, frequency-matched by age, between 1999 and 2014. We assigned estimated exposures to particulate matter (PM10, PM2.5), nitrogen dioxide (NO2), and formaldehyde at residential addresses, averaged over the susceptibility window 3rd to 10th year prior to the index date. We considered potential confounding by sex, age, nationality, socio-economic status, occupational exposures to benzene and formaldehyde, and prior cancer diagnoses. RESULTS: There was no association of exposures to PM10, PM2.5, and NO2 with leukaemia incidence. However, an indication of increased risk emerged for formaldehyde, despite wide statistical uncertainty (OR 1.46, 95%CI 0.65-3.25 per IQR-difference of 1.2 µg/m3). Estimated associations for formaldehyde were higher for acute (OR 2.07, 95%CI 0.70-6.12) and myeloid subtypes (OR 1.79, 95%CI 0.64-5.01), and in the 4-km buffer around the industrial facilities (OR 2.78, 95%CI 0.48-16.13), although they remained uncertain. CONCLUSIONS: This was the first study investigating the link between ambient formaldehyde exposure and leukaemia incidence in the general population. The evidence presented suggests an association, although it remains inconclusive, and a potential significance of emissions related to industrial activities in the district. Further research is warranted in larger populations incorporating data on other potential risk factors.

The fate of an inhaled cigarette puff in the human respiratory tract.

OBJECTIVE: Cigarette smoking can lead to a host of adverse health effects such as lung and heart disease. Increased lung cancer risk is associated with inhalation of carcinogens present in a puff of smoke. These carcinogenic compounds deposit in the lung at different sites and trigger a cascade of events leading to adverse outcomes. Understanding the site-specific deposition of various smoke constituents will inform the study of respiratory diseases from cigarette smoking. We previously developed a deposition model for inhalation of aerosol from electronic nicotine delivery systems. In this study, the model was modified to simulate inhalation of cigarette smoke consisting of soluble and insoluble tar, nicotine, and cigarette-specific constituents that are known or possible human carcinogens. MATERIALS AND METHODS: The deposition model was further modified to account for nicotine protonation and other cigarette-specific physics-based mechanisms that affect smoke deposition. Model predictions showed a total respiratory tract uptake in the lung for formaldehyde (99%), nicotine (80%), and benzo[a]pyrene (60%). RESULTS: The site of deposition and uptake depended primarily on the constituent's saturation vapor pressure. High vapor pressure constituents such as formaldehyde were preferentially absorbed in the oral cavity and proximal lung regions, while low vapor pressure constituents such as benzo[a]pyrene were deposited in the deep lung regions. Model predictions of exhaled droplet size, droplet retention, nicotine retention, and uptake of aldehydes compared favorably with experimental data. CONCLUSION: The deposition model can be integrated into exposure assessments and other studies that evaluate potential adverse health effects from cigarette smoking.

Hidden formaldehyde in cosmetic products.

BACKGROUND: Formaldehyde is a common cause of contact allergy. Hidden formaldehyde, that is, formaldehyde in products without formaldehyde releasers, has previously been detected in cosmetic products. OBJECTIVES: The objective of this study was to investigate the content and causes of hidden formaldehyde in leave-on cosmetic products. METHODS: The formaldehyde release from 142 cosmetic products, primarily creams, was analysed using the chromotropic acid (CA) method. The study included 130 products with no formaldehyde releasers on the ingredient list and 12 products with formaldehyde releasers. Products without formaldehyde releasers positive to CA, that is, with formaldehyde ≥2.5 ppm, were additionally analysed using high-performance liquid chromatography (HPLC). Formaldehyde release from selected raw materials and packaging were also investigated. RESULTS: Hidden formaldehyde was found in 23 of the 130 products (18%) without formaldehyde releasers on the ingredient list. The average formaldehyde content was 105 ppm (range: 0.5-507 ppm) in products with hidden formaldehyde and 355 ppm (range: 75-637 ppm) in eight products with formaldehyde releasers, selected for HPLC analysis. Impurities of formaldehyde in dihydroxyacetone may be a cause of hidden formaldehyde in self-tanners. No clear pattern was found for the other products with hidden formaldehyde. CONCLUSIONS: Changes in regulation are needed to prevent allergic contact dermatitis from hidden formaldehyde in cosmetic products.

Revealing the dual impact of VOCs on recycled rubber workers: Health risk and odor perception.

Volatile organic compounds (VOCs) pose potential hazards to human health and contribute significantly to odor pollution. This study examined VOC emissions from a representative recycled rubber industry, evaluating the occupational health risks for frontline workers in various workshops. Variables such as gender and workshop-specific concentration variations were considered using Monte Carlo simulation methods. Employees in the five production workshops and office areas face noncarcinogenic health risks with hazard indices (HIs) greater than 1, with the rubber compounding phase presenting the highest risk. Acetaldehyde is identified as the primary noncarcinogenic health risk substance, with hazard quotient (HQ) values exceeding 1 in all workshops. Carcinogenic health risks vary by area, with the highest risks found in compounding and refining workshops. Formaldehyde poses the greatest risk in rubber grinding workshops and offices, with cumulative weights exceeding unacceptable levels of M80.58 % and W77.56 % in grinding and M94.98 % and W92.24 % in the office. Male workers face 4-7 % greater noncarcinogenic VOC health risks than females and 5-14 % greater carcinogenic risks from individual VOCs, increasing their susceptibility to health risks caused by VOCs. Additionally, our analysis of odor identification and intensity classification revealed that 53 VOCs are capable of causing odor pollution, with several substances reaching odor levels of 2 or higher. The predominant perceived odors, as reflected in the odor wheel, include categories such as "solvent/aromatic" and "sweet/fruit," with aldehydes being the primary odor-causing substances. In summary, emissions of VOCs from rubber industrial processes not only pose substantial health risks to workers but also contribute significantly to odor pollution. Consequently, enterprises must prioritize optimizing workplace conditions to ensure the occupational health and well-being of their employees.

The association between long-term exposure to ambient formaldehyde and respiratory mortality risk: A national study in China.

INTRODUCTION: While ambient formaldehyde (HCHO) concentrations are increasing worldwide, there was limited research on its health effects. OBJECTIVES: To assess the association of long-term exposure to ambient HCHO with the risk of respiratory (RESP) mortality and the associated mortality burden in China. METHODS: Annual and seasonal RESP death and tropospheric HCHO vertical columns data were collected in 466 counties/districts across China during 2013-2016. A difference-in-differences approach combined with a generalized linear mixed-effects regression model was employed to assess the exposure-response association between long-term ambient HCHO exposure and RESP mortality risk. Additionally, we computed the attributable fraction (AF) to gauge the proportion of RESP mortality attributable to HCHO exposure. RESULTS: This analysis encompassed 560,929 RESP deaths. The annual mean ambient HCHO concentration across selected counties/districts was 8.02×1015 ± 2.22×1015 molec.cm-2 during 2013-2016. Each 1.00×1015 molec.cm-2 increase in ambient HCHO was associated with a 1.61 % increase [excess risk (ER), 95 % confidence interval (CI): 1.20 %, 2.03 %] in the RESP mortality risk. The AF of RESP mortality attributable to HCHO was 12.16 % (95 %CI:9.33 %, 14.88 %), resulting in an annual average of 125,422 (95 %CI:96,404, 153,410) attributable deaths in China. Stratified analyses suggested stronger associations in individuals aged ≥65 years old (ER=1.87 %, 95 %CI:1.43 %, 2.32 %), in cold seasons (ER=1.00 %, 95 %CI:0.56 %, 1.44 %), in urban areas (ER=1.65 %, 95 %CI:1.15 %, 2.16 %), and in chronic obstructive pulmonary disease patients (ER=1.95 %, 95 %CI:1.42 %, 2.48 %). CONCLUSIONS: This study suggested that long-term HCHO exposure may significantly increase the risk of RESP mortality, leading to a substantial mortality burden. Targeted measures should be implemented to control ambient HCHO pollution promptly.

Investigation of formaldehyde sources and its relative emission intensity in shipping channel environment.

Formaldehyde (HCHO) is considered one of the most abundant gas-phase carbonyl compounds in the atmosphere, which can be directly emitted through transportation sources. Long-Path Differential Optical Absorption Spectroscopy (LP-DOAS) was used to observe HCHO in the river channel of Wusong Wharf in Shanghai, China for the whole year of 2019. Due to the impact of ship activity, the annual average HCHO level in the channel is about 2.5 times higher than that in the nearby campus environment. To explain the sources of HCHO under different meteorological conditions, the tracer-pair of CO and Ox (NO2+O3) was used on the clustered air masses. The results of the source appointment show that primary, secondary and background account for 24.14% (3.34 ± 1.19 ppbv), 44.78% (6.20 ± 2.04 ppbv) and 31.09% (4.31 ± 2.33 ppbv) of the HCHO in the channel when the air masses were from the mixed direction of the city and channel, respectively. By performing background station subtraction at times of high primary HCHO values and resolving the plume peaks, directly emitted HCHO/NO2 in the channel environment and plume were determined to be mainly distributed between 0.2 and 0.3. General cargo ships with higher sailing speeds or main engine powers tend to have higher HCHO/NO2 levels. With the knowledge of NO2 (or NOx) emission levels from ships, this study may provide data support for the establishment of HCHO emission factors.

Modelling the equilibrium partitioning of low concentrations of airborne volatile organic compounds in human IVF laboratories.

RESEARCH QUESTION: Can volatile organic compounds (VOC) be modelled in an IVF clinical setting? DESIGN: The study performed equilibrium modelling of low concentrations of airborne VOC partitioning from the air phase into the oil cover layer into the water-based culture media and into/onto the embryo (air-oil-water-embryo). The air-phase VOC were modelled based on reported VOC concentrations found in modern assisted reproductive technology (ART) suites, older IVF clinics, and hospitals, as well as at 10 parts per billion (ppb) and 100 ppb for all compounds. The modelling was performed with 23 documented healthcare-specific VOC. RESULTS: Based on the partitioning model, seven compounds (acrolein, formaldehyde, phenol, toluene, acetaldehyde, ethanol and isopropanol) should be of great concern to the embryologist and clinician. Acrolein, formaldehyde, phenol, toluene and acetaldehyde are the VOC with the most potent cytotoxic factor and the highest toxic VOC concentration in media. In addition, ethanol and isopropanol are routinely found in the greatest air-phase concentrations and modelled to have the highest water-based culture concentrations. CONCLUSIONS: The results of the equilibrium partitioning modelling of VOC provides a fundamental understanding of how airborne VOC partition from the air phase and negatively influence human IVF outcomes. The results presented here are based on the theoretical model and the values presented have not yet been measured in a laboratory or clinical setting. High air-phase concentrations and toxic concentrations of VOC in culture media are likely indicators of poor clinical outcomes. Based on this model, improved air quality in IVF laboratories reduces the chemical burden imparted on embryos, which supports findings of improved IVF outcomes with reduced air-phase VOC concentrations.

Determination of Urban Formaldehyde Emission Ratios in the Shanghai Megacity.

We analyzed two data sets of atmospheric formaldehyde (FA) at an urban site in the Shanghai megacity during the summer of 2017 and the winter of 2017/18, with the primary objective of determining the emission ratio of formaldehyde versus carbon monoxide (CO). Through the photochemical age method and the minimum R squared (MRS) method, we derived the summer urban formaldehyde release ratios of 3.37 ppbv (ppmv of CO)-1 and 4.04 ppbv (ppmv of CO)-1, respectively. The error of both estimations is within ±20%, indicating the consistency of the results. We recognized the hourly minimum emission ratios determined from the MRS method to be indicative of actual formaldehyde emission ratios. Similarly, the emission ratio in winter is determined to be 2.10 ppbv (ppmv of CO)-1 utilizing the MRS method. The findings provide significant insights into the potential impact of motor vehicle exhaust on formaldehyde emissions in urban areas. This work demonstrates that the formaldehyde emission ratio determined by the MRS method can be used to represent the emissions of the freshest air mass. Formaldehyde photolysis contributed an average of 9% to the free radical primary reaction rate (P(ROx)) as a single chemical species during the daytime in summer, which was lower than the 11% recorded in winter. Formaldehyde emission reduction positively impacts local ozone production, so models describing ozone formation in Shanghai during summer need to reflect these emissions accurately. Evidence of the crucial catalytic role of formaldehyde in particulate matter formation has been confirmed by recent research. A potentially effective way to decrease the incidence of haze days in autumn and winter in the future is therefore to focus on reducing formaldehyde emissions.

Comprehensive interventions to reduce occupational hazards among medical staff in the pathology department of five primary hospitals.

OBJECTIVE: To explore comprehensive interventions to reduce occupational hazards among medical staff in the pathology department of five primary hospitals. METHODS: The indoor air quality in the pathology department of five primary hospitals and the health status of staff were investigated and analyzed. Formaldehyde and benzene concentrations in the technical and diagnostic rooms of the pathology departments were analyzed before and after comprehensive interventions. The Environmental Protection Agency risk assessment paradigm was used to assess the health risks from occupational exposure to benzene and formaldehyde. Consequently, considering the local environment, targeted comprehensive intervention measures were developed, including optimizing management, raising awareness, updating equipment, and replacing reagents. RESULTS: Eye discomfort was higher among technicians in the pathology department than among clinical medical staff (P < 0.05). Before comprehensive interventions, formaldehyde concentrations were higher in the technical room than in the diagnostic room at the five primary hospitals (P < 0.05). However, compared to before interventions, formaldehyde and benzene concentrations in both rooms were significantly lower after comprehensive interventions. Furthermore, although medium risks of occupational exposure to benzene and formaldehyde remained in both rooms before and after comprehensive interventions, the risk values before interventions were higher than after comprehensive interventions. The staff of the technical rooms showed higher risk values that those of the diagnostic rooms before and after comprehensive interventions. Similarly, although hazard quotient (HQ) values for occupational exposure to benzene and formaldehyde were < 1 in both the technical and diagnostic rooms before and after comprehensive interventions, with lower noncarcinogenic risks, the values were higher before than after comprehensive interventions. Moreover, staff in the technical room had higher HQ values before and after comprehensive interventions than those in the diagnostic room. The use of environmentally friendly reagents for the preparation of frozen sections was effective. CONCLUSION: Comprehensive interventions significantly reduced occupational hazards among staff at the pathology department of five primary hospitals, which is of great practical significance to protect the health of staff.

HPLC and GC Characterization of Dicliptera bupleuroides Aerial Parts and Evaluation of Its Anti-Inflammatory Potential in Vitro, in silico and in Vivo Using Carrageenan and Formalin Induced Inflammation in Rat Models.

The current study aimed to evaluate the anti-inflammatory activity of Dicliptera bupleuroides Nees aerial parts methanol extract and its different fractions namely hexane, chloroform, ethyl acetate and butanol in vitro using cyclooxygenase inhibitory assay (COX-2). In vivo anti-inflammatory evaluation was performed using carrageenan and formalin induced inflammation in rat models followed by molecular docking. High performance liquid chromatography (HPLC) and gas chromatography coupled with mass chromatography (GC/MS) analyses were used for chemical analyses of the tested samples. The tested samples showed significant inhibition in COX-2 inhibitory assay where methanol extract (DBM) showed the highest inhibitory potential at 100 µg/mL estimated by 67.86 %. At a dose of 400 mg/kg, all of the examined samples showed pronounced results in carrageenan induced acute inflammation in rat model at 4th h interval with DBM showed the highest efficiency displaying 65.32 % inhibition as compared to the untreated rats. Formalin model was employed for seven days and DBM exhibited 65.33 % and 69.39 % inhibition at 200 and 400 mg/kg, respectively approaching that of the standard on the 7th day. HPLC revealed the presence of caffeic acid, gallic acid and sinapic acid, quercetin and myricetin in DBM. GC/MS analysis of its hexane fraction revealed the presence of 16 compounds belonging mainly to fatty acids and sterols that account for 85.26 % of the total detected compounds. Molecular docking showed that hexadecanoic acid followed by decanedioic acid and isopropyl myristate showed the best fitting within cyclooxygenase-II (COX-II) while nonacosane followed by hexatriacontane and isopropyl myristate revealed the most pronounced fitting within the 5-lipoxygenase (5-LOX) active sites. Absorption, metabolism, distribution and excretion and toxicity prediction (ADMET/ TOPKAT) concluded that most of the detected compounds showed reasonable pharmacokinetic, pharmacodynamic and toxicity properties that could be further modified to be more suitable for incorporation in pharmaceutical dosage forms combating inflammation and its undesirable consequences.

Phytoremediation of indoor formaldehyde by plants and plant material.

Formaldehyde evolves from various household items and is of environmental and public health concern. Removal of this contaminant from the indoor air is of utmost importance and currently, various practices are in the field. Among these practices, indoor plants are of particular importance because they help in controlling indoor temperature, moisture, and oxygen concentration. Plants and plant materials studied for the purpose have been reviewed hereunder. The main topics of the review are, mechanism of phytoremediation, plants and their benefits, plant material in formaldehyde remediation, and airtight environmental and health issues. Future research in the field is also highlighted which will help new researches to plan for the remediation of formaldehyde in indoor air. The remediation capacity of several plants has been tabulated and compared, which gives easy access to assess various plants for remediation of the target pollutant. Challenges and issues in the phytoremediation of formaldehyde are also discussed.Novelty statement: Phytoremediation is a well-known technique to mitigate various organic and inorganic pollutants. The technique has been used by various researchers for maintaining indoor air quality but its efficiency under real-world conditions and human activities is still a question and is vastly affected relative to laboratory conditions. Several modifications in the field are in progress, here in this review article we have summarized and highlighted new directions in the field which could be a better solution to the problem in the future.

Feed intake and milk yield and composition of lactating dairy goats in response to partial substitution of soybean meal for formaldehyde-treated sesame meal in the diet.

This study was conducted to evaluate the effect of substitution of soybean meal (SBM) for formaldehyde-treated sesame meal (FTSM) on nutrient intake and digestibility, ruminal and blood parameters and milk production and composition in lactating Murciano-Granadina goats. Forty lactating goats were randomly assigned to one of the following four treatments: (1) diet with 16.5% CP, containing SBM (CON); (2) diet with 16.5% CP, containing untreated SM (USM); (3) diet with 16.5% CP, containing FTSM (FT); and (4) diet with 14.5% CP containing FTSM (LPFT). The results showed that nutrient intake was highest in the FT group (p < 0.001), while it was similar between the CON and LPFT groups, except for the intake of CP, which was higher in the CON group. The FT and LPFT had lower ruminal pH compared to CON and USM groups (p < 0.001), with goats in group FT having the highest volatile fatty acids (VFA) production (p < 0.001). The highest propionate concentration was observed in the LPFT treatment (p < 0.001), followed by the FT, CON, and USM treatments. Goats offered USM and LPFT treatments presented the highest and lowest acetate: propionate values, respectively, among the experimental groups (p < 0.001). The results also showed that LPFT goats had the lowest blood urea nitrogen (BUN) level (p = 0.004), while FT goats presented a lower non-esterified FA (NEFA) level compared with CON and LPFT goats (p = 0.01). Goats offered the FT diet had the highest milk yield (p = 0.002) and energy-corrected milk yield (p < 0.001) among all dietary groups. The highest milk fat (p < 0.001), protein (p = 0.001), lactose (p = 0.007), total solids (p = 0.003), and solids-not-fat (SNF) (p = 0.003) contents were observed in FT goats, which didn't differ from USM goats. The inclusion of formaldehyde-treated SM increased the percentage of C18:3 (p < 0.001) and C20:1 (p = 0.04) FAs compared with USM and CON treatments. Milk from USM, FT, and LPFT goats had lower levels of saturated (p < 0.001) and medium-chain FAs (p = 0.014) compared with CON goats, whereas milk from CON goats had lower levels of unsaturated, monounsaturated, and long-chain FAs compared to other groups (p < 0.001). The lowest and the highest concentrations of polyunsaturated FAs were observed in CON and LPFT goats, respectively (p = 0.001). It can be concluded that SBM can be advantageously replaced by formaldehyde-treated SM in the diet as a feasible alternative to improve feed intake and production performance of dairy goats.

[Study on formulation and revision of standard limit for formaldehyde in the "Standards for indoor air quality（GB/T 18883-2022）" in China].

Formaldehyde, as an important pollutant in indoor air, has always been of great concern. In the newly issued "Standards for indoor air quality (GB/T 18883-2022)", the standard limit of formaldehyde has been restricted to 0.08 mg/m3. In order to better promote the implementation and application of this new standard, this study reviewed and interpreted the relevant technical content for determining the standard limit, including the indoor concentration and human exposure levels of formaldehyde, the health effects of formaldehyde, and the derivation of safety reference values. It also proposed prospect for the future development and revision of quality standards for formaldehyde in indoor air.

Real-world emission characteristics of carbonyl compounds from agricultural machines based on a portable emission measurement system.

Emissions of carbonyl compounds from agricultural machines cannot be ignored. Carbonyl compounds can cause the formation of ozone (O3) and secondary organic aerosols, which can cause photochemical smog to form. In this study, 20 agricultural machines were tested using portable emission measurement system (PEMS) under real-world tillage processes. The exhaust gases were sampled using 2,4-dinitrophenylhydrazine cartridges, and 15 carbonyl compounds were analyzed by high-performance liquid chromatography. Carbonyl compound emission factors for agricultural machines were 51.14-3315.62 mg/(kg-fuel), and were 2.58 ± 2.05, 0.86 ± 1.07 and 0.29 ± 0.20 g/(kg-fuel) for China 0, China II and China III emission standards, respectively. Carbonyl compound emission factor for sowing seeds of China 0 agricultural machines was 3.32 ± 1.73 g/(kg-fuel). Formaldehyde, acetaldehyde and acrolein were the dominant carbonyl compounds emitted. Differences in emission standards and tillage processes impact ozone formation potential (OFP). The mean OFP was 20.15 ± 16.15 g O3/(kg-fuel) for the China 0 emission standard. The OFP values decreased by 66.9% from China 0 to China II, and 67.4% from China II to China III. The mean OFP for sowing seeds of China 0 agricultural machines was 25.92 ± 13.84 g O3/(kg-fuel). Between 1.75 and 24.22 times more ozone was found to be formed during sowing seeds than during other processes for China 0 and China II agricultural machines. Total carbonyl compound emissions from agricultural machines in China was 19.23 Gg in 2019. The results improve our understanding of carbonyl compound emissions from agricultural machines in China.

A Novel Strategy Based on Permanent Protein Modifications Induced by Formaldehyde for Food Safety Analysis.

The illegal additions of chemicals in food products are serious incidents threatening current public safety. To date, ideal methods to determine permanent traces of prohibited chemicals in foods are still lacking. For example, formaldehyde (FA) can be added illegally as a food preservative. However, most current methods that are dependent on the direct detection of FA are not able to determine if FA has ever been added once food products are rinsed completely. Herein, we present a novel approach relying upon protein modifications induced by FA (PMIF) to examine FA in foods. We reveal the entire catalog of PMIFs in food products by combining mass spectrometry analysis with unrestrictive identification of protein modifications. Consequently, four obvious PMIFs were identified and confirmed as markers to discriminate the addition of FA in foods. Our study demonstrates that the approach based on PMIFs enables detecting the imprinted trace of FA even if the food products have been washed thoroughly. Our work presents a novel strategy for analysis of chemical additives, offering broad potential applications in protein analysis and food safety.