Assessment of gingival translucency at the mandibular incisors with two different probing systems. A cross sectional study.

OBJECTIVES: Increasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools. MATERIALS AND METHODS: A total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic. RESULTS: When the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods. CONCLUSIONS: An agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors.  CLINICAL RELEVANCE: In the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype.

Relationship between soft tissue dimensions and tomographic radial root position classification system for immediate implant installation.

The aim of this study was to evaluate the relationship between soft tissue dimensions and radial root position (RRP) classification for immediate implant placement on maxillary anterior teeth. Maxillary anterior teeth (n = 420) were analyzed in the radial plane of cone beam computed tomography (CBCT) scans. Each tooth was classified according to its RRP: class I, (IA, IB); class II (IIA, IIB) class III; class IV, and class V. Soft tissue thickness at different landmarks, supracrestal soft tissue height, and crestal bone thickness were measured in CBCT. Keratinized tissue width was clinically measured. Gingival phenotype (thick or thin) was evaluated by transparency of the periodontal probe and at the landmark 2 mm from the gingival margin in CBCT. Class I tooth position accounted for 31.7%, class II for 45%, class III for 13.3%, class IV for 0.5%, and class V for 9.5%. The gingival phenotype was associated with RRP (χ2 test, p < 0.05). Soft tissue dimensions were significantly different over RRP classes (ANOVA and Tukey tests, p < 0.05). Types IA and IIA presented both thick soft and hard tissues. When planning immediate implants in the anterior maxilla, soft tissue dimensions evaluation should be incorporated into RRP classification to increase the accuracy and predictability of treatment outcomes.

Clinical and histologic evaluation of heterotopic mucosa transpositioning at teeth and dental implants.

AIM: To investigate the healing after heterotopic mucosa transpositioning at dental implants and teeth. MATERIALS AND METHODS: One hemimandible per dog (n = 4) was allocated to receive 3 implants (test), whereby 3 premolars on the contralateral side served as controls. After osseointegration, a Z-plasty was performed on the buccal aspect of the test and control sites to heterotopically move the zone of keratinized tissue (KT) into a region with non-keratinized tissue (nKT) and vice versa. Clinical measurements were performed before (T0) and at 12 weeks following heterotopic transposition (T1). Thereafter, specimens were processed for histological analysis. RESULTS: Clinical measurements revealed that at T1, a band of KT was reestablished at teeth (mean: 2.944 ± 1.866 mm), whereas at implants, the transpositioned nKT resulted in a mucosa without any signs of keratinization (mean: 0 mm; p < .0001). At implant sites, the probing attachment level loss was more pronounced compared to tooth sites (-1.667 ± 1.195 mm and -1.028 ± 0.878 mm, respectively; p = .0076). Histologically, the transpositioned nKT, was accompanied by the formation of KT at the tooth but not at implant sites. The supracrestal soft tissues were statistically significantly higher at tooth compared to implant sites (2.978 ± 0.483 mm and 2.497 ± 0.455 mm, p = .0083). The transpositioned KT remained mostly unaltered in its morphological characteristics. CONCLUSIONS: The findings of this study indicate that: (a) transpositioned KT may retain its morphological characteristics; and (b) transpositioned nKM was accompanied by the formation of KT at the tooth but not at implant sites.

Thermographic examination of gingival phenotypes: correlation between morphological and thermal parameters.

OBJECTIVES: To evaluate the clinical and thermographic aspects of the gingival phenotype (GP) in healthy subjects. MATERIALS AND METHODS: The study sample examined 264 teeth, upper and lower incisors, comprising 132 central incisors (CI) and 132 lateral incisors (LI), in 33 healthy volunteers. Four periodontal parameters were recorded systematically: ratio of width to length of the dental crown (CW/CL), height of the gingival attachment (KGW), probing depth (PD), and gingival transparency (GT). The temperatures of the attached gingiva (KGW temp) and the free gingival margin (FGM Temp) were also recorded by way of infrared thermography (IRT). RESULTS: The average age of the sample was 30.70 ± 7.65 years. Of the 264 teeth evaluated, 76.1% had a thin GP. There was a significant association between CW/CL (p < 0.001), KGW (p < 0.001), PD (p < 0.007), and FGM Temp (p < 0.006) with the tooth groups. The results show a significant and inversely proportional correlation between clinical parameters and gingival temperature (p < 0.05). A significant association was found between CW/CL (p < 0.026); KGW (p < 0.001); and GP. CONCLUSION: CW/CL, KGW, PD, and FGM Temp vary according to tooth group. The majority of the sample presented with the thin GP, which was more prevalent in the lower LIs and CIs. No significant association could be observed between thermographic parameters and GP. CLINICAL RELEVANCE: Knowledge of the temperature of the gingival tissues can be useful in helping to diagnose and plan periodontal treatments. Moreover, our findings will help future studies evaluate the use of IR as an auxiliary diagnostic method in dentistry, eliminating GP as a confounding factor, since it does not seem to influence the temperature of the gingival tissues.

Clinical and computed tomographic evaluations of periodontal phenotypes in a Chinese population: a cross-sectional study.

OBJECTIVES: To investigate the diagnostic value of probe transparency related to gingival thickness (GT) and keratinized gingival width (KGW) at individual and site levels and explore the relationship of buccal bone plate thickness (BT) with GT and KGW. MATERIALS AND METHODS: A total of 1,606 teeth from 167 patients with periodontally healthy maxillary anterior region were included. GT was measured with probe transparency and transgingival probing. KGW was measured directly. BTs were assessed at the level 1 mm apical to the alveolar crest (BT1) and midpoint of the root (BT2) and evaluated at individual and tooth levels along with their mutual associations. RESULTS: The prevalence of thick gingiva was 53% with probe transparency measurement and 51% with transgingival probing. The cutoff gingival thickness was 0.8 mm, which correlated moderately with a Cohen's kappa of 0.386. The mean GT, KGW, and BTs (BT1 and BT2) in the maxillary anterior region were 0.97 ± 0.46, 5.51 ± 1.62, 0.85 ± 0.31, and 0.79 ± 0.32 mm, respectively. GT and KGW correlated mildly (r = 0.261), and GT and BTs correlated moderately (BT1: r = 0.298; BT2: r = 0.338). GT and BTs differed significantly between men and women and among different tooth sites. CONCLUSIONS: GT and BTs correlated positively in the maxillary anterior region and varied within and among individuals. Sex was a factor influencing the gingival phenotype and bone morphotype. CLINICAL RELEVANCE: GT measured with transgingival probing, with a cutoff of 0.8 mm, could serve as an objective measure to distinguish different gingival phenotypes.

The buccal corridor as a possible morphological risk indicator for sleep disordered breathing.

OBJECTIVE: To explore a possible morphological relationship between buccal corridor, gingival display, transpalatal molar width, palatal height, and a cephalometric measurement (PV-A Line) as a risk indicator for sleep-disordered breathing. MATERIALS AND METHODS: Thirty subjects were enrolled. Full face maximum smile images and CBCT scans were taken. A Pearson correlation coefficient was used to identify any relationships between the variables. RESULTS: No correlations were identified between any of the variables investigated in this study as they relate to risk factors for sleep-disordered breathing. CONCLUSIONS: The amount of buccal corridor space in relation to a patient's smile and the amount of gingival display does not appear to be a reliable metric in identifying certain morphological risk factors for sleep-disordered breathing. CLINICAL SIGNIFICANCE: Assessing the amount of buccal corridor space in relation to a smile does not appear to be a reliable predictor of morphological risk for certain risk factors of sleep-disordered breathing. In addition, utilizing the amount of gingival display in a patient's maximum smile does not appear to relate directly to risks in sleep-disordered breathing. Other tests and discovery may be necessary to identify these types of patients.

Morphological changes in alveolar bone thickness and height after orthodontic proclination or labial movement combined with autogenous soft tissue grafting: a CBCT evaluation.

BACKGROUND: Autogenous soft tissue grafting is indicated in thin gingival biotypes before orthodontic proclination or labial movements to increase the keratinized gingiva and prevent gingival recession. However, its effect on local alveolar bone remodeling is unclear. The aim of this study was to investigate the effects of autogenous soft tissue grafting on local alveolar bone after orthodontic proclination or labial movements. METHODS: Sixteen patients with a thin scalloped gingival biotype, narrow keratinized gingiva, or thin cortical bone requiring orthodontic proclination or labial movement of teeth were included. Cone-beam computed tomography (CBCT) images were obtained before grafting and at least 6 months after surgery. Sixty mandibular teeth were included, and the vertical bone level and horizontal labial bone thickness were measured. The results were compared using paired t-tests or Wilcoxon signed-rank test. RESULTS: The horizontal labial bone thickness increased, especially at 6 mm below the cementoenamel junction (CEJ) in the mandibular central and lateral incisors (P < 0.05). The total alveolar bone area of the canines, first premolars, and second premolars increased at 3, 6, and 9 mm below the CEJ, respectively, and the differences were statistically significant (P < 0.05). Additionally, vertical bone height increased minimally on the labial side, but the differences were not statistically significant (P > 0.05). CONCLUSIONS: New bone regeneration was observed on the labial (pressure) side after autogenous soft tissue grafting, which may represent a mechanism to effectively prevent gingival recession and maintain periodontal health. IRB APPROVAL: All the experimental procedures involving humans in this study were approved by the Medical Ethics Committee of Xiangya Stomatological Hospital, Central South University ( No. 20190048).

Is interdental papilla filling using hyaluronic acid a stable approach to treat black triangles? A systematic review.

PURPOSE: To evaluate the stability of interdental papilla filling using hyaluronic acid (HA) to treat black triangles in esthetic regions. METHODS: The protocol was registered in PROSPERO. Six databases (PubMed, Scopus, Embase, Lilacs, SciELO, and Web of Science) were used as primary search sources, and OpenGrey and OpenThesis were used to capture the "gray literature." Only before-after studies were included. The JBI Checklist assessed the risk of bias. Only four studies met the inclusion criteria and were considered for the analyses. The studies were published from 2010 to 2016. All studies presented a low risk of bias. Considering the studies do not have control groups, a weighted average by sample size was calculated to obtain a general estimate of the percentage of papillary filling after 6 months and the number of HA applications. RESULTS: The studies showed the percentage of papillary reconstruction after 6 months of application, the weighted average by sample size was 77.41% (SD = 20.68), with an average number of applications of 3.17 (SD = 0.31). CONCLUSION: The application of HA may be used to repair anesthetic defects in the papilla. CLINICAL SIGNIFICANCE: Interdental papilla reconstruction with injectable HA is an option of nonsurgical treatment for interdental papilla deficiencies. However, there is still concern about the quality of the evidence available, considering that studies with different experimental designs can produce contradictory results. Moreover, further understanding is required on the stability of tissue gain promoted by HA in black triangles.

Evaluation of intraoral digital impressions for obtaining gingival contour in the esthetic zone: accuracy outcomes.

OBJECTIVES: To assess the accuracy of intraoral digital impressions for gingival contour captured in the esthetic zone in vivo. MATERIAL AND METHODS: Five participants with full upper dentition were recruited. For each participant, three scans were taken using two intraoral scanning (IOS) systems (3Shape TRIOS Color, TRC; CEREC Omnicam, OC) respectively; three conventional impressions (CIs) were taken using vinyl polysiloxane materials. The CIs of all participants were casted and then digitized with a model scanner (IScan D103i, Imetric). Precision was evaluated by superimposing three repeated STL datasets per participant within each group and calculating the (90th-10th)percentile/2 values. The CIs were the reference for evaluating the level of system error of the two IOS systems from the true value. Digital models from CI and each IOS group were superimposed and (mean positive deviation-mean negative deviation)/2[mean negative deviation, mean positive deviation] were calculated to assess trueness level of the two IOS systems. RESULTS: For the soft tissue acquisition, precision results of each group were 45.10 ± 12.54 µm in TRC, 66.04 ± 13.46 µm in OC, and 63.66 ± 17.19 in CI (TRC vs OC, p < 0.001; TRC vs CI, p = 0.001; OC vs CI, p = 0.66). Trueness results were 80.12 ± 8.69[- 112.10 ± 9.88, 48.13 ± 13.79] µm in TRC and 82.70 ± 8.85[- 121.41 ± 15.40, 43.98 ± 11.86] µm (p > 0.05). CONCLUSIONS: In dentate situations, the two tested IOS systems achieved a clinically satisfying accuracy for capturing gingival contour in anterior maxilla, with a comparable or superior precision to the CI. TRC achieved a similar trueness and a higher precision level compared with OC. CLINICAL RELEVANCE: Intraoral digital impressions could be a recommended method for recording 3-dimensional gingival contour in the esthetic zone.

Branching Patterns of Mental Nerve in Newborns.

In classical textbooks of Anatomy, the mental nerve is considered to be the terminal or main branch of the inferior alveolar nerve, especially trifurcate with no designated names as soon as it emerges from the mental foramen. The textbooks define the innervation area of the mental nerve regionally without naming its terminal branches. Nomina Anatomica designates 3 terminal branches of mental nerve as "labial, gingival, and mental branch" but offers no description about their distribution on the mandible. In the present study, bilateral dissections were performed on the lower lip specimens of 20 newborns for 40 mental nerves to determine the branching types of mental nerve. Although anatomy textbooks indicate that mental nerve divides into 3 branches, the authors noted that mental nerve branched into 1, 2, or 3 branches at or right after its exit from the mental foramen. Branching patterns were typed in 13 different subclasses under 3 main groups (Form I-II-III). Moreover, the branching patterns that could not be included in one of these 3 main groups were defined as "Complex Form." The most common type of branching that the authors observed was Form II, which had 2 terminal branches with an incidence of 41.9% (16 specimens). The next frequently encountered type was Form III, having 3 terminal branches, and it was detected in 32.0% of patients (12 specimens). The least common form was Form I, which had 1 terminal branch with a frequency of 15.8% (6 specimens). The unclassified group, Complex Form, was found 10.5% (4 specimens).

Gingival phenotypes and their relation to age, gender and other risk factors.

BACKGROUND: Careful consideration and assessment of the type of phenotype has gained a fundamental importance in the treatment planning for any patient. We evaluated the prevalence of gingival phenotypes in a sample of Yemeni population and to explore its relationships to gender, age and other risk factors. METHODS: This cross-sectional study was performed among 456 patients. All maxillary anterior teeth were included for all parameters and 1st molars were included for gingival thickness measurements. All patients included in this study were systemically healthy and presented no dental crowding. Four clinical parameters were systematically recorded: Gingival thickness (GT), Width of keratinized gingiva (WKG), Crown width/ crown length (CW/CL) ratio and Papilla height (PH). Scores obtained from different parameters measurements were recorded and analyzed using non-parametric tests where P-value < 0.05 was considered significant. One examiner performed all measurements. RESULTS: The mean age was 29.9 ± 8.26 years. Of 456 recruited subjects, 83 (18.2%) subjects had thin, 69 (15.1%) had thick GT and 304 (66.7%) were placed in non-categorized (1.5-2 mm) GT. Square crown shape was found in 210 (44.1%) patients and 245 patients (55.9%) showed rectangular shape. Regarding WKG, 114 (25%) patients had width < 4 mm, 319 (70%) had width 4.1-8 mm and 23 (5%) patients had width >  8 mm. There was no significant difference between males and females for GT measurements. Regarding WKG, results showed that the prevalence of WKG 4.1-8 mm was more among females while males had more prevalence of ≤4 mm with significance difference. PH showed no significant differences between males and females. Regarding age, there was no significant differences between patients ≤25 years and >  25 years for all gingival parameters measurements. The relationship of smoking with different gingival parameters also showed no significant differences between smokers and non-smokers. Similarly, relationship of khat chewing with different gingival parameters showed no significant difference. Regarding inter-relationship between parameters, thin GT was associated with rectangular tooth form while square and quadrate forms are more associated with "1.5-2 mm" GT. WKG of ≤4 mm was associated with rectangular tooth form while WKG >  8 was more associated with square and quadrate forms with no significant difference. Results showed significant association between thin GT with 4.1-8 mm WKG. CONCLUSION: Yemeni population had more prevalence of "1.5-2 mm" GT, rectangular crown shape and WKG from 4.1-8 mm. Regarding interrelationship between gingival parameters, GT showed obvious relationship with WKG, CW/CL ratio and PH. WKG with CW/CL also showed significant relationship while no relationship was shown between other gingival phenotype parameters.

Correlation between clinical parameters of crown and gingival morphology of anterior teeth and periodontal biotypes.

BACKGROUND: In this study, we conducted a quantitative analysis of the clinical parameters of crown and gingival morphology (CGM) of the maxillary anterior teeth (MAT). We also analyzed the correlation of these parameters with periodontal biotype (PB), with a view to providing objective standards for PB diagnosis. METHODS: The three-dimensional (3D) maxillary digital models of 56 individuals were obtained using an intra-oral scanner. The following parameters were measured with the SpaceClaim software: gingival angle (GA), papilla width (PW), papilla height (PH), crown length (CL), crown width (CW), crown width/crown length ratio (CW/CL), bucco-lingual width of the crown (BLW), contact surface width (CSW), and contact surface height/crown length ratio (CS/CL). The PB were determined based on the transparency of the periodontal probe through the gingival sulcus. Independent factors influencing PB were analyzed by logistic regression, and the optimal cutoff values for the independent influencing factors were analyzed using receiver operating characteristic curves (ROC curves). RESULTS: There was no significant difference in the parameters of CGM of the MAT at the left and right sides. The thick biotype accounted for 69.6%, and the parameters of GA, PW, PH, CW, CW/CL and CS/CL were significantly correlated with PB (P ≤ 0.2). GA (odds ratio (OR) = 1.206) and PW (OR = 5.048) were identified as independent predictive factors of PB, with areas under the ROC curve (AUC) of 0.807 and 0.881, respectively, and optimal cutoff values of 95.95° and 10.01 mm, respectively. CONCLUSION: The CGMs of the MAT at the left and right side are symmetrical. The thin biotype accounts for a small proportion, and GA and PW are independent influencing factors of PB. GA of 95.95° and PW of 10.01 mm are the optimal cutoff values for categorization of individuals as thick biotype. This indicates that when the GA and PW of the right maxillary central incisor are G ≥ 95.95° and ≥ 10.01 mm, respectively, there is a higher probability that these individuals will be categorized as thick biotype.

Comparison of two color-difference formulas using the Bland-Altman approach based on gingiva color space.

The objectives of this study were to determine the relationship between the results provided by the classical CIELab (ΔEab*) and the CIEDE2000 (ΔE00) formulas and the gingival color space using the Bland and Altman limits of agreement, to use this relationship to establish the equivalences between the gingival color thresholds of perceptibility of both formulas, and to evaluate whether the relationship between ΔEab* and ΔE00 is modified depending on the axis in which the changes occur. The means of the L*, a*, and b* coordinates of the 21 gingiva porcelain samples (Heraceram, Heraeus Kulzer Mitsui Chemical Groups) were used and the differences in color were calculated in 210 pairs of samples using the CIELab (ΔE*ab) and CIEDE2000 (ΔE00) color-difference formulas. The results obtained with these formulas were compared and the limits of agreement after a logarithmic transformation of the data were obtained. The relationship between both formulas was ln ΔE00 = - 0.22 + ln ΔEab*. The results obtained with the CIELab formula were between 1.01 (95% confidence interval 0.98-1.03) and 1.54 (95% confidence interval 1.52-1.59) times higher than those obtained with the CIEDE200 formula. In the gingiva color space, the scale factor between the CIEDE2000 and CIELab values changes from 0.63 to 1.02, such that providing an accurate scale factor between both values proves difficult. The pairs with the highest ratio were those where the difference in color was mainly due to changes in lightness, whereas the pairs with the smallest ratio were those where the difference in color was mainly due to changes in the blue-yellow or green-red axes.

Clinical study on natural gingival color.

The aims of the study were: to describe the gingival color surrounding the upper incisors in three sites in the keratinized gingiva, analyzing the effect of possible factors which modulate (socio-demographic and behavioral) intersubject variability; to study whether the gingiva color is the same in all three locations and to describe intrasubject color differences in the keratinized gingiva band. Using the CIELAB color system, three reference areas (free gingival margin, keratinized gingival body, and birth or upper part of the keratinized gingiva) were studied in 259 individuals, as well as the related socio-demographic factors, oral habits and the chronic intake of medication. Shadepilot™ spectrophotometer was used. Descriptive and inferential statistical analysis was performed. There are statistically significant differences between males and females for coordinates L* and a* in the middle and free gingival margin. For the b* coordinate, there are differences between males and females in the three locations studied (p < 0.05). The minimum and maximum coordinates in which the CIELAB natural gingival space is delimited are L* minima 28.3, L* maximum 65.4, a* minimum 11.1, a* maximum 37.2, b* minimum 6.9, and b* maximum 25.2*. Age, smoking, and the chronic intake of medication had no significant effect on gum color. There are perceptible color differences within the keratinized gingiva band. These chromatic differences must be taken into account if the prosthetic characterization of gingival tissue is to be considered acceptable. There are significant differences between the color coordinates of the three sites studied in the keratinized gingiva of men and women.

Influence of facial pattern in smile attractiveness regarding gingival exposure assessed by dentists and laypersons.

INTRODUCTION: The present study aimed to assess the influence of facial pattern in smile attractiveness on different levels of gingival exposure evaluated by dental specialists and laypersons. METHODS: Frontal photographs of 2 white Brazilian women, one with a long face and the other with a balanced face, were acquired and subsequently modified to simulate gingival exposure from 0 to 6 mm. Four groups of evaluators of both sexes (mean age 34 y), including laypersons (n = 24) and dental specialists (n = 72; 24 orthodontists, 24 periodontists, and 24 maxillofacial surgeons), used a Likert-type scale to evaluate the attractiveness of the smiles of these subjects with different levels of gingival exposure. Kruskal-Wallis and Friedman tests were used to compare the perceptions of the dental specialists and laypersons. Spearman rank correlation coefficient was used to associate the age of the examiners with their rating outcomes. Statistical significance was set at P < 0.05. RESULTS: Statistically significant differences were observed for the following levels of exposure for the long-faced subject: 0 mm, 4 mm, 5 mm, and 6 mm. Laypersons were less critical than dental specialists. In the balanced-face subject, statistically significant differences were observed between laypersons and dental specialists for gingival exposure levels of 4 mm, 5 mm, and 6 mm. Laypersons perceived gingival exposure to a lesser extent for the balanced-face subject than for the long-face subject. The balanced face was better rated than the long face by dental specialists and laypersons for all levels of gingival exposure. CONCLUSIONS: Facial patterns influenced the smile attractiveness evaluation. The facial characteristics of a balanced facial pattern attenuated the perception of gingival exposure.

Does the vertical position of maxillary central incisors in men influence smile esthetics perception?

INTRODUCTION: The aim of this study was to investigate whether there is any influence on the perception of smile esthetics among orthodontists and laypersons, with regard to different vertical positions of the maxillary central incisors. METHODS: Frontal smile photographs digitally altered at full-face view and close-up view of 2 adult men aged between 20 and 30 years were used. Six vertical positions of the central incisors were created, with changes of 0.5 mm. The images were randomly assembled in an album that was presented to 53 orthodontists and 53 laypersons, who evaluated the attractiveness of the images by using visual analog scales. Comparison among the images was performed using 1-way analysis of variance, with Tukey post-hoc test. To compare the distribution of the mean scores between the full-face and close-up smile views, and between orthodontists and laypersons, the Student t test was used. The level of significance was established at 5%. RESULTS: The best evaluations presented the following: (a) the gingival margins of the central incisors corresponded to, or were up to, 1 mm below the line of the canine gingival margins, and (b) the incisal step between the central and lateral incisors was from 1.0 to 2.0 mm. The smiles considered least attractive showed (a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins, and (b) no step, or a step of 2.5 mm, between the central and lateral incisors. CONCLUSIONS: The results of this study suggested that, in men, slightly extruded central incisors were esthetically more attractive than intruded incisors.

Piezocorticision-assisted orthodontics: Efficiency, safety, and long-term evaluation of the inflammatory process.

OBJECTIVES: The aim of this work was to compare the duration of treatment between orthodontic treatment combined with piezocorticision (OT-PC) and conventional orthodontic treatment (COT), as well as to evaluate the safety, inflammatory process, periodontal health, and soft tissue healing in the OT-PC group. METHODS: Twelve patients were included in each group, and their treatment times were compared for preliminary bracket alignment (PBA) and for overall treatment. In the OT-PC group, the inflammatory process was evaluated by quantifying cytokines in the gingival crevicular fluid. A calibrated examiner measured the probing depth (PD), the distance between the gingival margin and the cementoenamel junction (GM-CEJ), and the clinical attachment level (CAL), before and after OT-PC. The presence of gingival scars was evaluated. Bone and root injuries were assessed with the use of cone-beam computed tomography. RESULTS: The treatment time was significantly reduced in the OT-PC group for PBA in both maxilla (45%; P = 0.001) and mandible (31%; P = 0.023), as well as for overall treatment (52%; P < 0.0001). Although not statistically significant, several inflammatory mediators demonstrated peaks at 3-5 and 16 weeks. There were not significant changes in PD and GM-CEJ after OT-PC treatment, unlike CAL (0.09 ± 0.12 mm; P = 0.024); 47.5% of piezocorticisions caused gingival scars. Only one patient showed no scars. Four cortical bones did not heal completely, and 2 roots had piezoelectric injuries. CONCLUSION: OT-PC was effective at reducing the orthodontic treatment time.

Precise Reproduction of Soft Tissue Structure around the Pontic Area Using Computer-Aided Design and Manufacturing.

Reproducing soft tissue contours around a pontic area is important for the fabrication of an esthetic prosthesis, especially in the anterior area. A gingival model that precisely replicates the soft tissue structure around the pontic area can be easily obtained by taking a pick-up impression of an interim fixed dental prosthesis. After a working cast is fabricated using the customary technique, the pick-up model is superimposed onto the working model for the pontic area using computer-aided design and manufacturing (CAD/CAM). A definitive restoration using this technique would be well adapted to the pontic base, which is formed by the interim prosthesis.

Esthetic perception of smiles with different gingival conditions.

This study aimed to compare the perceptions of smile esthetics among general practitioners, periodontists, and laypeople. Photographs of smiles were taken and digitally modified to create different gingival conditions: gingival asymmetry, unilateral gingival recession, and bilateral gingival recession. These photographs were evaluated by 150 volunteers (19-70 years old) using a 100.0-mm visual analog scale. The volunteers consisted of 50 laypeople with no knowledge of dentistry, 50 general dentists, and 50 periodontists. Analysis of variance and Student t test were performed when data presented a normal distribution. If the hypothesis of normality was rejected, the Newman-Keuls test was applied to the data. Results showed that laypeople noticed gingival asymmetry only when it reached 2.0 mm, while periodontists and general dentists noticed it at 1.0 mm. Periodontists and general dentists considered smiles with unilateral recession of ≥1.0 mm to be less attractive, while the smallest modification that was deemed unesthetic by the laypeople was 2.0 mm. In the evaluation of bilateral gingival recession, general dentists and periodontists found smiles with a 1.0-mm modification less attractive, while the changes were not noticed by laypeople until the modification reached 1.5 mm. It can be concluded that laypeople perceived changes in smile esthetics differently than did dental professionals, which suggests that laypeople may be less concerned about the esthetic effects of minor gingival alterations than are dental professionals. Therefore, it is important for the dentist to understand the individual patient's perception of what constitutes an esthetic smile before recommending a dental treatment plan.

A novel perspective for predicting gingival biotype via dentopapillary measurements on study models in the Saudi population: Cross-sectional study.

BACKGROUND/PURPOSE: Gingival biotype (GB) is a crucial factor in predicting the success of soft tissue periodontal and peri-implant surgical interventions. Consequently, contemplating noninvasive, less time-consuming procedure to anticipate it has become a part and parcel of the current practice. This article presents a novel algorithm to detect GB in the Saudi population based on the dentopapillary measurements taken on laboratory models. In addition, it targets to allocate a range of values for thick and thin biotypes. MATERIALS AND METHODS: Model analysis was done on 160 patients to measure eight gingival parameters, and an algorithm was developed according to the results of multiple and linear regression analyses. Applying the dentopapillary parameters to the algorithm revealed a prediction of the biotype. Finally, the resultant values and the exact thickness were reassessed directly in a sample of patients using a modified caliper. RESULTS: The regression analysis revealed an algorithm predicting biotypes among patients based on their measured dentopapillary values. Discriminant analysis was used to allocate the values to thin and thick biotypes to further demystify that they coincide with <0.7 mm and >1.5 mm, respectively. However, gingival thickness between 0.7 and 1.5 mm was considered intermediate biotype. CONCLUSION: GB could be predicted based on the dentopapillary measurements taken on laboratory models, which may further reduce the chairside time and increase the success rate of the surgical procedures. Significant variations in the range of values of the thick and thin biotype were detected in the Saudi population compared to other races. CLINICAL SIGNIFICANCE: The escalating invasion of interventional procedures in the dental practice necessitates measuring the GB as a predictor of procedure success. This study introduces an algorithm for detecting the GB and updates the range of values for thick and thin biotypes in the Saudi population that would consequently reduce chairside time.