Structure-aided ACEI-capped remdesivir-loaded novel PLGA nanoparticles: toward a computational simulation design for anti-SARS-CoV-2 therapy.

The sudden arrival of novel coronavirus disease 2019 (COVID-19) has stunned the world with its rapidly spreading virus. Remdesivir, a broad spectrum anti-viral drug, is now under in vitro and in vivo investigation as a potential agent against SARS-CoV-2. However, the results of this therapy were recently equivocal due to no significant benefit in the clinical trial. Herein, combination molecular docking with dissipative particle dynamics (DPD) simulations is used to theoretically design angiotensin-converting enzyme inhibitor (ACEI)-containing remdesivir-loaded PLGA nanoparticles (NPs) for anti-SARS-CoV-2 therapy. Based on the therapeutic and lung protective effect of ACEI, the classical lisinopril molecule covalently grafted onto PLGA (L-PLGA) has been used to encapsulate remdesivir. A binding model is used to confirm the interactions between lisinopril and ACE on the surface of cells, as well as remdesivir and its intracellular targeting protein (RNA-dependent RNA polymerase (RdRp)). Furthermore, DPD simulations are applied to study the nano-aggregation of drug-free L-PLGA, and remdesivir loaded in L-PLGA. The lisinopril molecules were directly demonstrated to be on the surface of L-PLGA NPs. Molecular docking proved that hydrogen bonding was decisive for the encapsulation of remdesivir. With an increase in concentration, remdesivir loaded L-PLGA formed spherical NPs, and then underwent precipitation. Similar to the above conditions, high remdesivir loading was also observed to cause precipitation formation. Thus, the optimized remdesivir NPs in our study give insights into a rational platform for formulation design against this global pandemic.

Blend of guar gum and Eudragit shows excellent drug release retarding behavior in sustained release tablets.

The objective of the current study was to compare sustained release behavior of natural and synthetic polymers in matrix tablets of lisinopril and hydrochlorothiazide combination. Guar gum was used as a hydrophilic natural polymer while Eudragit L 100-55 was used as synthetic polymer. Tablets were formulated by direct compression method using different ratios and combinations of both polymers. Various physical tests were performed. After that, in vitro drug release patterns were investigated by performing dissolution in pH 6.8 phosphate buffer. Results indicated that tablets with combination of both guar gum and Eudragit L 100-55 (formulation F10) were having the best drug release retarding behavior. All formulations followed zero order kinetics indicating the drug release was independent of the concentration. Higuchi model revealed drug release by diffusion mechanism while Korsmeyer Peppas model suggested that formulations followed the non-fickian release behavior.

Design and characterization of lisinopril-loaded superparamagnetic nanoparticles as a new contrast agent for in vitro, in vivo MRI imaging, diagnose the tumors and drug delivery system.

Superparamagnetic γ-Fe2O3@SiO2@lisinopril (MNPs-Lisinopril) nanoparticles are T2 and T2* negative contrast agents for magnetic resonance imaging. In this work, we report the preparation of lisinopril-coated MNPs for the first time as new T2 and T2* negative contrast agent for in vitro and in vivo MRI imaging and demonstrate the potential it simultaneously for drug delivery system, diagnose the tumors and MRI contrast agent. Measurements on the relaxivities (r1, r2 and r2*) of the MNPs-Lisinopril were determined in deionized water (in vitro). Furthermore, after subcutaneous injection of the MNPs-Lisinopril into 4T1 (ATCC® CRL2539™) tumor in BALB/c mice, the relaxivities were determined by a 1.5 T MRI apparatus (in vivo). T2- and T2*-weighted MRI images of MNPs-Lisinopril showed that the MR signal intensity decreased significantly with increasing nanoparticle concentration in water. With measured r2 values up to 236.66 mM-1s -1, our MNPs-Lisinopril show better performance than commercial alternatives. Also we tested drug release of Lisinopril coated MNPs at two different pHs. The MNPs- Lisinopril is a pH-sensitive drug delivery system and releases different amounts of lisinopril from MNPs-Captopril in different pHs.

Interaction of PEGylated anti-hypertensive drugs, amlodipine, atenolol and lisinopril with lipid bilayer membrane: A molecular dynamics simulation study.

The interaction of PEGylated anti-hypertensive drugs, amlodipine, atenolol and lisinopril with lipid bilayer membrane dimyristoylphosphatidylcholine (DMPC) has been studied in nine different simulation systems consisting of 128 lipid molecules and appropriate number of water molecules by molecular dynamics method and by utilizing GROMACS software. The influences of PEGylation on the mentioned drugs and the differences in application of two types of spacer molecules on the performance of drugs and DMPC membrane have been evaluated and mass density of the components in the simulation box, mean square displacement (MSD), electrostatic potential, hydrogen bonding, radial distribution function (RDF), area per lipid, order parameter, and angle distribution of the component molecules including drug, DMPC and PEG has been investigated. Furthermore, umbrella sampling analysis indicated that, PEGylation of the drugs made amlodipine to behave more hydrophilic, whereas in case of lisinopril and atenolol, PEGylation made these drugs to behave more hydrophobic. In almost all of the simulated systems, PEGylation increased the diffusion coefficient of the drugs.

Combined spectroscopies and molecular docking approach to characterizing the binding interaction between lisinopril and bovine serum albumin.

To further understand the mode of action and pharmacokinetics of lisinopril, the binding interaction of lisinopril with bovine serum albumin (BSA) under imitated physiological conditions (pH 7.4) was investigated using fluorescence emission spectroscopy, synchronous fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), circular dichroism (CD) and molecular docking methods. The results showed that the fluorescence quenching of BSA near 338 nm resulted from the formation of a lisinopril-BSA complex. The number of binding sites (n) for lisinopril binding on subdomain IIIA (site II) of BSA and the binding constant were ~ 1 and 2.04 × 10(4) M(-1), respectively, at 310 K. The binding of lisinopril to BSA induced a slight change in the conformation of BSA, which retained its α-helical structure. However, the binding of lisinopril with BSA was spontaneous and the main interaction forces involved were van der Waal's force and hydrogen bonding interaction as shown by the negative values of ΔG(0), ΔH(0) and ΔS(0) for the binding of lisinopril with BSA. It was concluded from the molecular docking results that the flexibility of lisinopril also played an important role in increasing the stability of the lisinopril-BSA complex.

A dearth of data: the problem of phosphorus in prescription medications.

A high dietary intake of phosphorus is considered by most to be a significant health threat for dialysis patients. Efforts to include the phosphorus content of foods on the nutrition label in the US have, to date, been fruitless. Another source of phosphorus, largely unrecognized, is prescription medications. These may contain phosphorus as indicated on their package label; the amount is not quantified. We examined the labels of the branded forms of 200 of the most widely prescribed medications in Dialysis Clinic centers in the United States and found that 23 (11.5%) contained phosphorus. A sampling of different doses and manufacturers (generic and branded) of these drugs was analyzed for phosphorus content and found levels as high as 111.5 mg/dose (40 mg paroxetine). Notable were the phosphorus content of a generic 10 mg lisinopril (32.6 mg) and a generic 10 mg amlodipine (40.1 mg). The significant potential for iatrogenic injury accruing from the use of these drugs warrants efforts at remediation. Specific information on the phosphorus content of medications used by dialysis population needs to be made available to the dialysis community.

Design, synthesis and evaluation of novel 2-butyl-4-chloroimidazole derived peptidomimetics as Angiotensin Converting Enzyme (ACE) inhibitors.

A series of novel 2-butyl-4-chloro-1-methylimidazole derived peptidomimetics were designed, synthesized and evaluated for their Angiotensin Converting Enzyme (ACE) inhibitor activity. 2-Butyl-4-chloro-1-methylimidazole-5-carboxylic acid 2 obtained after oxidation of respective carboxaldehyde 1, was condensed with various amino acid methyl esters 3a-k to give imidazole-amino acid conjugates 4a-k in very good yields. Ester hydrolysis of 4a-k with aqueous LiOH gave the desired peptidomimetics 5a-k. Screening all the new compounds 4a-k and 5a-k using ACE inhibition assay, resulted five compounds 4i, 4k, 5e, 5h and 5i as potent ACE inhibitors with IC50 of 0.647, 0.531, 1.12, 0.657 and 0.100µM with minimal toxicity. Among them, 5i emerged as most active ACE inhibitor with greater potency than marketed drugs Lisinopril, Ramipril and relatively equipotent to Benazepril, Quinapril and Enalapril.

Formulation and in-vitro evaluation of floating bilayer tablet of lisinopril maleate and metoprolol tartrate.

The purpose of this study was to introduce the technology for the development of rate-controlled oral drug delivery system to overcome various physiological problems. Several approaches are being used for the purpose of increasing the gastric retentive time, including floating drug delivery system. Gastric floating lisinopril maleate and metoprolol tartrate bilayer tablets were formulated by direct compression method using the sodium starch glycolate, crosscarmellose sodium for IR layer. Eudragit L100, pectin, acacia as sustained release polymers in different ratios for SR metoprolol tartrate layer and sodium bicarbonate, citric acid as gas generating agents for the floating extended release layer. The floating bilayer tablets of lisinopril maleate and metoprolol tartrate were designed to overcome the various problems associated with conventional oral dosage form. Floating tablets were evaluated for floating lag time, drug contents and in-vitro dissolution profile and different kinetic release models were applied. It was clear that the different ratios of polymers affected the drug release and floating time. L2 and M4 showed good drug release profile and floating behavior. The linear regression and model fitting showed that all formulation followed Higuchi model of drug release model except M4 that followed zero order kinetic. From the study it is evident that a promising controlled release by floating bilyer tablets of lisinopril maleate and metoprolol tartrate can be developed successfully.

PLA-PEG-PLA copolymer-based polymersomes as nanocarriers for delivery of hydrophilic and hydrophobic drugs: preparation and evaluation with atorvastatin and lisinopril.

Tri-block poly(lactide)-poly(ethylene glycol)-poly(lactide) (PLA-PEG-PLA) copolymers were synthesized and used to prepare polymersomes loaded separately by the hydrophobic and hydrophilic model drugs, atorvastatin and lisinopril, respectively. The resulting nanostructures were characterized by various techniques such as FTIR, DSC, PCS and AFM. The polymersomes exhibited high encapsulation efficiencies of almost 78% and 70.8% for atorvastatin and lisinopril, respectively. Investigation on FTIR and DSC results revealed that such a high encapsulation efficiency is due to strong interaction between atorvastatin and the copolymer. The impact of drug/copolymer ratio and copolymer composition on drug-loading efficiency and drug release behavior were also studied. The results showed that in case of lisinopril, polymersomes exhibited a triphasic drug release, while for atorvastatin a biphasic release profile was obtained. Overall, the results indicated that PLA-PEG-PLA polymersomes can be considered as a promising carrier for both hydrophilic and hydrophobic drugs.

Surface plasmon resonance analysis of the binding mechanism of pharmacological and peptidic inhibitors to human somatic angiotensin I-converting enzyme.

Somatic angiotensin I-converting enzyme (ACE) possesses two catalytic domains and plays a major role in the regulation of blood pressure, thus representing a therapeutic target for the treatment of hypertension. We present a comprehensive surface plasmon resonance (SPR) study of the interaction of human somatic ACE with the pharmacological inhibitors captopril and lisinopril, the bradykinin potentiating peptide BPP-11b, and the food peptidic inhibitors from bovine αs2-casein, F(174)ALPQYLK(181) and F(174)ALPQY(179). SPR binding curves recorded with the high potency inhibitors captopril, lisinopril, and BPP-11b were evaluated both by regression analysis and by kinetic distribution analysis. The results indicated that captopril and lisinopril bound ACE with two K(D)'s differing by a factor 10-20 and >30, respectively (lowest K(D) = 0.1-0.3 nM for both inhibitors). This shows, for the first time in a direct binding assay with the two-domain enzyme, the existence of two binding modes of the pharmacological inhibitors, presumably with the two ACE domains. The BPP-11b-ACE binding curves were complex but showed a predominant interaction with K(D) in the nanomolar range. The caseinopeptides, known to inhibit ACE with an IC50 of 4.3 µM, bound to ACE with K(D) = 3-4 µM. Mapping of the F(174)ALPQY(179) binding site on ACE by sequential binding studies using captopril or BPP-11b indicated that it bound to (or near) the two active sites of ACE, in agreement with the stoichiometry of 2 determined from data fitting. Our results provide a detailed characterization of ACE-inhibitor binding modes and validate SPR for predicting the inhibitory potential of new compounds.

Syntheses and characterization of lisinopril-coated gold nanoparticles as highly stable targeted CT contrast agents in cardiovascular diseases.

Lisinopril was used as the targeting moiety to prepare gold nanoparticle-based functional CT contrast agents. Pure lisinopril, thioctic acid-lisinopril conjugate, and reduced thioctic acid-lisinopril conjugate were used to obtain GNP-Lis, GNP-TA-Lis, and GNP-RTA-Lis, respectively, via ligand exchange reaction on citrate-coated gold nanoparticles (GNPs). These lisinopril-decorated GNPs were fully characterized, and their chemical stabilities in biological relevant media and in high salt concentration were compared. Their relative stabilities toward lyophilization and against cyanide-induced decomposition were also investigated. Because of their higher stability, GNP-TA-Lis were used to assess the targeting of angiotensin converting enzyme (ACE) using X-ray computed tomography (CT). The images obtained displayed high contrast in the region of the lungs and heart, clearly indicating the targeting of ACE, whose overexpression is associated with development of cardiac and pulmonary fibrosis. Thus, the new nanoprobes prepared here will serve as very useful tools for the monitoring of cardiovascular pathophysiologies using CT imaging.

Inhibitor and substrate binding by angiotensin-converting enzyme: quantum mechanical/molecular mechanical molecular dynamics studies.

Angiotensin-converting enzyme (ACE) is an important zinc-dependent hydrolase responsible for converting the inactive angiotensin I to the vasoconstrictor angiotensin II and for inactivating the vasodilator bradykinin. However, the substrate binding mode of ACE has not been completely understood. In this work, we propose a model for an ACE Michaelis complex based on two known X-ray structures of inhibitor-enzyme complexes. Specifically, the human testis angiotensin-converting enzyme (tACE) complexed with two clinic drugs were first investigated using a combined quantum mechanical and molecular mechanical (QM/MM) approach. The structural parameters obtained from the 550 ps molecular dynamics simulations are in excellent agreement with the X-ray structures, validating the QM/MM approach. Based on these structures, a model for the Michaelis complex was proposed and simulated using the same computational protocol. Implications to ACE catalysis are discussed.

Characterization of domain-selective inhibitor binding in angiotensin-converting enzyme using a novel derivative of lisinopril.

Human ACE (angiotensin-converting enzyme) (EC 3.4.15.1) is an important drug target because of its role in the regulation of blood pressure via the renin-angiotensin-aldosterone system. Somatic ACE comprises two homologous domains, the differing substrate preferences of which present a new avenue for domain-selective inhibitor design. We have co-crystallized lisW-S, a C-domain-selective derivative of the drug lisinopril, with human testis ACE and determined a structure using X-ray crystallography to a resolution of 2.30 A (1 A=0.1 nm). In this structure, lisW-S is seen to have a similar binding mode to its parent compound lisinopril, but the P2' tryptophan moiety takes a different conformation to that seen in other inhibitors having a tryptophan residue in this position. We have examined further the domain-specific interactions of this inhibitor by mutating C-domain-specific active-site residues to their N domain equivalents, then assessing the effect of the mutation on inhibition by lisW-S using a fluorescence-based assay. Kinetics analysis shows a 258-fold domain-selectivity that is largely due to the co-operative effect of C-domain-specific residues in the S2' subsite. The high affinity and selectivity of this inhibitor make it a good lead candidate for cardiovascular drug development.

Enhanced purification protocol for the angiotensin-converting enzyme from bovine systems and investigation of the in vitro effect of some active substances.

Angiotensin-converting enzyme (ACE, EC 3.4.15.1) synthesized by endothelial cells and responsible for the regulation of blood pressure was purified from the bovine lung with affinity chromatography method. The purification rate of the ACE of the bovine lung was calculated as 1748- fold. Optimum pH and optimum temperature for the purified ACE were found to be 7.6 and 35-40 °C, respectively. The purity and molecular weight of the ACE were designated with SDS-PAGE. The ACE was found to have three subunits with molecular weights of 57 kDa, 66 kDa, and 190 kDa. Then, the total molecular weight of the ACE was designated as 303 kDa with gel filtration chromatography. The effects of ACE inhibitors captopril, fosinopril, lisinopril, and beta-blockers propranolol, atenolol, and diuretic triamterene on ACE activity were studied. ACE inhibitors lisinopril, captopril, fosinopril, and diuretic triamterene demonstrated an inhibition effect on ACE activity. Beta-blockers indicated no effect on ACE. IC50 values of captopril, fosinopril, lisinopril, and triamterene from the graphical equation were calculated as 0.835 nM, 1.159 µM, 4.085 nM, and 227 µM, respectively. The inhibition type and Ki values of these compounds were determined from Lineweaver-Burk plots. Captopril, fosinopril, lisinopril, and triamterene demonstrated a non-competitive inhibition effect on ACE activity. Ki constants were found as 1.057 nM, 1.675 µM, 6.449 nM, and 419.5 µM, respectively. Captopril indicated the highest inhibitor effect with an IC50 value of 0.835 nM.

Non-destructive dose verification of two drugs within 3D printed polyprintlets.

Three-dimensional printing (3DP) is a revolutionary technology in pharmaceuticals, enabling the personalisation of flexible-dose drug products and 3D printed polypills (polyprintlets). A major barrier to entry of this technology is the lack of non-destructive quality control methods capable of verifying the dosage of multiple drugs in polyprintlets at the point of dispensing. In the present study, 3D printed films and cylindrical polyprintlets were loaded with flexible, therapeutic dosages of two distinct drugs (amlodipine and lisinopril) across concentration ranges of 1-5% w/w and 2-10% w/w, respectively. The polyprintlets were non-destructively analysed for dose content using a portable near infrared (NIR) spectrometer and validated calibration models were developed using partial least squares (PLS) regression, which showed excellent linearity (R2 Pred = 0.997, 0.991), accuracy (RMSEP = 0.24%, 0.24%) and specificity (LV1 = 82.77%, 79.55%) for amlodipine and lisinopril, respectively. X-ray powder diffraction (XRPD) and thermogravimetric analysis (TGA) showed that sintering partially transformed the phase of both drugs from the crystalline to amorphous forms. For the first time, we report a non-destructive method for quality control of two separate active ingredients in a single 3D printed drug product using NIR spectroscopy, overcoming a major barrier to the integration of 3D printing into clinical practice.

Equivalence in Active Pharmaceutical Ingredient of Generic Antihypertensive Medicines Available in Nigeria (EQUIMEDS): A Case for Further Surveillance.

BACKGROUND: Widespread access to good quality antihypertensive medicines is a critical component for reducing premature cardiovascular disease (CVD) mortality. Poor-quality medicines pose serious health concerns; however, there remains a knowledge gap about the quality of cardiovascular medicines available in low- and middle-income countries. OBJECTIVES: The aim of this study was to determine the quality of generic antihypertensive medicines available in the retail market of a developing country. METHODS: Samples of the 2 most commonly prescribed classes of antihypertensive medicines were collected from 3 states in 3 different geopolitical zones in Nigeria following a semirandom sampling framework. Medicine samples were purchased by mystery shoppers from 22 pharmacy outlets from 6 local government areas across the 3 states. Medicine quality was determined by measuring the amount of stated active pharmaceutical ingredient using high-performance liquid chromatography with photodiode array detection and classified according to their compliance to the specified pharmacopeia tolerance limits for each antihypertensive drug. RESULTS: Amlodipine and lisinopril were identified as the most commonly prescribed antihypertensive drugs in Nigeria. In total, 361 samples from 22 pharmacies were collected and tested. In total, 24.6% of amlodipine and 31.9% of lisinopril samples were of substandard quality and significantly more samples purchased in rural (59 of 161, 36.7%) compared with urban (32 of 200, 16%) outlets were found to be of substandard quality (p < 0.001). No falsified samples of either amlodipine or lisinopril were detected. There was large variation in price paid for the antihypertensive medicines (range ₦150 to ₦9,750). Of the 24 pharmacy outlets surveyed, 46% stated that patients did not always require a prescription and 21% had previously reported a medicine as falsified or substandard. CONCLUSIONS: More than one-quarter of some commonly prescribed antihypertensive medicines available in Nigeria may be of substandard quality. Enhanced quality assurance processes in low- and middle-income countries, such as Nigeria, are needed to support optimum management.

'Temporary Plasticiser': A novel solution to fabricate 3D printed patient-centred cardiovascular 'Polypill' architectures.

Hypertension and dyslipidaemia are modifiable risk factors associated with cardiovascular diseases (CVDs) and often require a complex therapeutic regimen. The administration of several medicines is commonly associated with poor levels of adherence among patients, to which World Health Organisation (WHO) proposed a fixed-dose combination unit (polypill) as a strategy to improve adherence. In this work, we demonstrate the fabrication of patient-specific polypills for the treatment of CVDs by fused deposition modelling (FDM) 3D printing and introduce a novel solution to meet critical quality attributes. The construction of poly(vinyl alcohol) (PVA)-based polypills containing four model drugs (lisinopril dihydrate, indapamide, rosuvastatin calcium and amlodipine besylate) was revealed for the first time. The impact of tablet architecture was explored using multi-layered and unimatrix structures. The novel approach of using distilled water as a 'temporary co-plasticiser' is reported and was found to significantly lower the extruding (90 °C) and 3D printing (150 °C) temperatures from 170 °C and 210 °C respectively, with consequent reduction in thermal stress to the chemicals. XRD indicated that lisinopril dihydrate and amlodipine besylate maintained their crystalline form while indapamide and rosuvastatin calcium were essentially in amorphous form in the PVA tablets. From the multilayer polypills, the release profile of each drug was dependent on its position in the multilayer. In addition to the multilayer architecture offering a higher flexibility in dose titration and a more adaptive solution to meet the expectations of patient-centred therapy, we identify that it also allows orchestrating the release of drugs of different physicochemical characteristics. Adopting such an approach opens up a pathway towards low-cost multidrug delivery systems such as tablets, stents or implants for wider range of globally approved actives.

Synthesis and evaluation of a series of 99mTc(CO)3+ lisinopril complexes for in vivo imaging of angiotensin-converting enzyme expression.

In animal models of cardiac disease and in human congestive heart failure, expression of angiotensin-converting enzyme (ACE) is upregulated in the failing heart and has been associated with disease progression leading to cardiac failure and fibrosis. To develop probes for imaging ACE expression, a series of di(2-pyridylmethyl)amine (D) chelates capable of binding M(CO)3+ (M = technetium, rhenium) was conjugated to lisinopril by acylation of the epsilon-amine of the lysine residue with a series of di(2-pyridylmethylamino)alkanoic acids where the distance of the chelator from the lisinopril core was investigated by varying the number of methylene spacer groups to produce di(2-pyridylmethyl)amine(Cx)lisinopril analogs: D(C4)lisinopril, D(C5)lisinopril, and D(C8)lisinopril. The inhibitory activity of each rhenium complex was evaluated in vitro against purified rabbit lung ACE and was shown to vary directly with the length of the methylene spacer: Re[D(C8)lisinopril], inhibitory concentration of 50% (IC50) = 3 nM; Re[D(C5)lisinopril], IC50 = 144 nM; and Re[D(C4)lisinopril], IC50 = 1,146 nM, as compared with lisinopril, IC50 = 4 nM. The in vivo specificity for ACE was determined by examining the biodistribution of the 99mTc-[D(C8)lisinopril] analog in rats with and without pretreatment with unlabeled lisinopril. Uptake in the lungs, a tissue that constitutively expresses ACE, was 15.2 percentage injected dose per gram at 10 min after injection and was dramatically reduced by pretreatment with lisinopril, supporting ACE-mediated binding in vivo. Planar anterior imaging analysis of 99mTc-[D(C8)lisinopril] corroborated these data. Thus, high-affinity 99mTc-labeled ACE inhibitor has been designed with potency similar to that of lisinopril and has been demonstrated to specifically localize to tissues that express ACE in vivo. This agent may be useful in monitoring ACE as a function of disease progression in relevant diseases such as heart failure.

Antihypertensive mechanism of the dipeptide Val-Tyr in rat aorta.

Antihypertensive peptides received much interest over the last decade. These peptides are known to be angiotensin converting enzyme (ACE) inhibitors in vitro, but the actual antihypertensive mechanisms in vivo are still unclear. In this research, we used rat aortic rings in organ bath experiments to investigate five potential vascular antihypertensive mechanisms of the dipeptide Val-Tyr. Only one significant effect was observed, namely preincubation of the aorta with Val-Tyr led to a significant shift of the concentration-response curve evoked by angiotensin I (Ang I). Val-Tyr had no effect on the angiotensin II receptor or the alpha-adrenergic receptor. Furthermore, it did not interact with voltage-operated Ca2+ channels, or with nitric oxide production/availability. In conclusion, our results show that Val-Tyr specifically inhibits Ang I-evoked contraction through ACE inhibition and that four other main mechanisms of vascular tone regulation are not affected.

Kinetics of lisinopril intramolecular cyclization in solid phase monitored by Fourier transform infrared microscopy.

The solid-state intramolecular cyclization of lisinopril to diketopiperazine was investigated by in situ Fourier transform infrared (FT-IR) microscopy. Using a controllable heating cell, the isothermal transformation was monitored in situ at 147.5, 150, 152.5, 155, and 157.5 degrees C. The collected time-dependent FT-IR spectra at each isothermal temperature were preprocessed and analyzed using a multivariate chemometric approach. The pure component spectra of the observable component (lisinopril and diketopiperazine) were resolved and their time-dependent relative contributions were also determined. Model-free and various model fitting methods were implemented in the kinetic analysis to estimate the activation energy of the intramolecular cyclization reaction. Arrhenius plots indicate that the activation energy is circa 327 kJ/mol.