The feather-degrading bacterial community in two soils as revealed by a specific primer targeting serine-type keratinolytic proteases.

Feather waste represents a huge resource of protein, but is underutilized due to its recalcitrant nature. Feather-degrading bacteria can biologically degrade feathers and have great potential for industries. In this study, we first designed a primer set (BC) suitable for exploring the diversity of the keratinolytic bacterial community with denatured gradient gel electrophoresis (DGGE). With the BC primer set, the difference in the keratinolytic bacterial community between a feather-dumping (FD) soil and a non feather-dumping (NFD) soil and the influence of feather addition (enrichment culture) on the keratinolytic bacterial community were investigated. DGGE and sequencing showed that keratinolytic bacteria in these soils belong to 2 phyla (Actinobacteria and Proteobacteria) and 9 genera (Micromonospora, Verrucosispora, Actinopolymorpha, Knoellia, Hyalangium, Stigmatella, Archangium, Cystobacter, and Luteimonas). Feather addition decreased the species richness of the keratinolytic bacteria in FD soil, but greatly increased the diversity, species richness and abundance in NFD soil. Moreover, feather addition to NFD soil induced some keratinolytic bacteria that were absent in all of the other soils. Collectively, these data indicate that keratinolytic bacteria are diverse in both FD and NFD soil, and some novel keratinolytic bacteria taxa might be revealed by using the BC primer set.

Legal regulation of the management of waste.

Healthcare providers such as hospitals and clinics have a duty of care under the Environmental Protection Act 1990 and its regulations to ensure that the waste they produce does not cause pollution or present a hazard to health. Nurses are well placed to ensure that the trust they work for discharge that duty. In this article, Richard Griffith outlines the legislation regulating the safe management and disposal of waste and considers how the law applies to nurses.

Municipal solid waste generation in growing urban areas in Africa: current practices and relation to socioeconomic factors in Jimma, Ethiopia.

As one of cities in the developing countries, a rapid population growth and industrial activities pose many environmental challenges for Jimma city, Ethiopia. One aspect of urban growth posing a threat on sustainable development is poor solid waste management, which results in environmental pollution. The purpose of this study is to evaluate the quantity, composition, sources of waste generated, their current disposal practices, and to recommend appropriate management technologies. The total waste generated daily in Jimma city was ca. 88,000 kg, and the average per capita generation rate was 0.55 ± 0.17 kg/capita/day. Eighty-seven percent of the waste was produced by households and 13% by institutions, and a negligible fraction (0.1%) was generated by street sweepings. During the rainy season, 40% more waste was generated than in the dry season because of the increased availability of agricultural food product. Further analysis showed that biodegradable organic waste constitutes 54% by weight with an average moisture content of 60% that falls within the required limits for composting. The nonbiodegradable components constitute 46% of which 30% of it was nonrecyclable material. Only 25% of the community uses municipal containers for disposal at the selected landfill site. Fifty-one percent of the households disposed their waste in individually chosen spots, whereas 22% burned their waste. Finally 2% of households use private waste collectors. The socioeconomic analysis showed that higher family income and educational status is associated more with private or municipal waste collection and less with the application of backyard or open dumping. These insights into generated waste and management practice in Jimma city allow making suggestions for improved collection, treatment, and disposal methods. A primary conclusion is that the biodegradable waste is a major fraction having suitable properties for recycling. As such an economic benefit can be obtained from this waste while avoiding the need for disposal.

Characterization of Korean solid recovered fuels (SRFs): an analysis and comparison of SRFs.

To date, Korea has used four species of solid recovered fuels (SRFs) which have been certified by the Environmental Ministry of Korea: refuse-derived fuel (RDF), refused plastic fuel (RPF), tyre-derived fuel (TDF), and wood chip fuel (WCF). These fuels have been used in many industrial boilers. In this study, seven regulatory properties associated with each of the four species: particle size, moisture and ash content, lower heating value (LHV), total chlorine, sulfur, and heavy metals content (Pb, As, Cd, Hg, Cr) were analysed. These properties are the main regulation criteria for the usage and transfer of SRFs in Korea. Different properties of each SRF were identified on the basis of data collected over the last 3 years in Korea, and the manufacturing process problem associated with the production of SRFs were considered. It was found that the high moisture content of SRFs (especially WCF) could directly lead to the low LHV of SRFs and that the poor screening and sorting of raw materials could cause defective SRF products with high ash or chlorine contents. The information obtained from this study could contribute to the manufacturing of SRF with good quality.

Design and quality assurance for solid recovered fuel.

This contribution describes the processing and the quality assurance of solid recovered fuel (SRF) that is increasingly used in a wide range of co-incineration plants. As an example, the preparation of municipal, commercial and industrial wastes for recovering of two different specifications of waste fuels (i.e. primary burner fuel and hot disc fuel used in cement industry) is reported and the multiple stage processing scheme used in SRF production is presented as well as the quality of SRF obtained. It will be shown, that removing of metals and sorting out of unwanted inert materials like stones, glass and concrete only after disintegration of the waste matrix during several crushing and separation steps can be carried out efficiently. In the following chapters, the quality assurance of SRF is demonstrated and described by using two different scenarios (i.e. different sizes of waste streams with different particle sizes, delivered to a cement plant by walking floor trucks). Based on CEN/TS-guidelines for SRF as well as national norms (ÖNORM), two sampling procedures and sample preparation schemes are elaborated for the scenarios and own practical experiences in quality assessment of heterogeneous waste fuels are reported. Finally, references are given on new, innovative laboratory equipment like cutting mills with attached cyclones and a mobile, hand-sized XRF-instrument for fast identification of extraneous materials removed from the laboratory sample prior to chemical analysis.

Biogenic carbon-enriched and pollutant depleted SRF from commercial and pretreated heterogeneous waste generated by NIR sensor-based sorting.

Mechanical processing using predominantly particle size and density as separation criteria is currently applied in the production of solid-recovered fuel or refuse-derived fuel. It does not sufficiently allow for the optimization of the quality of heterogeneous solid waste for subsequent energy recovery. Material-specific processing, in contrast, allows the separation criterion to be linked to specific chemical constituents. Therefore, the technical applicability of material-specific sorting of heterogeneous waste, in order to optimize its routing options, was evaluated. Two sorting steps were tested on a pilot and a large scale. Near infrared multiplexed sensor-based sorting devices were used (1) to reduce the chlorine (Cl) respectively pollutant content, in order to broaden the utilization options of SRF in industrial co-incineration, and (2) to increase the biogenic carbon (C(bio)) content, which is highly relevant in the light of the EU emission trading scheme on CO2. It was found that the technology is generally applicable for the heterogeneous waste fractions looked at, if the sensor systems are appropriately adjusted for the sorting task. The first sorting step allowed for the removal of up to 40% of the Cl freight by separating only 3 to 5% of the material mass. Very low Cl concentrations were achieved in the output stream to be used as solid-recovered fuel stream and additionally, the cadmium (Cd) and lead (Pb) concentration was decreased. A two- to four-fold enriched C(bio) content was achieved by the second sorting step. Due to lower yields in the large-scale test further challenges need to be addressed.

Criteria for solid recovered fuels as a substitute for fossil fuels--a review.

The waste treatment, particularly the thermal treatment of waste has changed fundamentally in the last 20 years, i.e. from facilities solely dedicated to the thermal treatment of waste to facilities, which in addition to that ensure the safe plant operation and fulfill very ambitious criteria regarding emission reduction, resource recovery and energy efficiency as well. Therefore this contributes to the economic use of raw materials and due to the energy recovered from waste also to the energy provision. The development described had the consequence that waste and solid recovered fuels (SRF) has to be evaluated based on fuel criteria as well. Fossil fuels - coal, crude oil, natural gas etc. have been extensively investigated due to their application in plants for energy conversion and also due to their use in the primary industry. Thereby depending on the respective processes, criteria on fuel technical properties can be derived. The methods for engineering analysis of regular fuels (fossil fuels) can be transferred only partially to SRF. For this reason methods are being developed or adapted to current analytical methods for the characterization of SRF. In this paper the possibilities of the energetic utilization of SRF and the characterization of SRF before and during the energetic utilization will be discussed.

Resource management performance in Bahrain: a systematic analysis of municipal waste management, secondary material flows and organizational aspects.

This paper presents a detailed review of municipal solid waste (MSW) and resource management in Bahrain, using the recently developed UN-Habitat city profile methodology. Performance indicators involve quantitative assessment of waste collection and sweeping, controlled disposal, materials recovery and financial sustainability together with qualitative assessment of user and provider inclusivity and institutional coherence. MSW management performance in Bahrain is compared with data for 20 other cities. The system in Bahrain is at an intermediate stage of development. A waste/material flow diagram allows visualization of the MSW system and quantifies all inputs and outputs, with the vast majority of MSW deposited in a controlled, but not engineered landfill. International comparative analysis shows that recycling and material recovery rates in Bahrain (8% wt. for domestic waste, of which 3% wt. due to informal sector) are generally lower than other cities, whereas waste quantities and generation rates at 1.1 kg capita(-1) day(-1)) are relatively high. The organic fraction (60% wt.) is comparable to that in middle- and low-income cities (50-80% wt.), although on the basis of gross domestic product Bahrain is classified as a high-income city, for which the average is generally less than 30% wt. Inclusivity in waste governance is at a medium stage as not all waste system stakeholders are considered in decision-making. While the system now appears to be financially stable, key pending issues are cost-effectiveness, improving the standards of disposal and deployment of extensive materials recovery/recycling services.

Co-combustion of solid recovered fuels in coal-fired power plants.

Currently, in ten coal-fired power plants in Germany solid recovered fuels from mixed municipal waste and production-specific commercial waste are co-combusted and experiments have been conducted at other locations. Overall, in 2010 approximately 800,000 tonnes of these solid recovered fuels were used. In the coming years up to 2014 a slight decline in the quantity of materials used in co-combustions is expected. The co-combustion activities are in part significantly influenced by increasing power supply from renewable sources of energy and their impact on the regime of coal-fired power plants usage. Moreover, price trends of CO2 allowances, solid recovered fuels as well as imported coal also have significant influence. In addition to the usage of solid recovered fuels with biogenic content, the co-combustion of pure renewable biofuels has become more important in coal-fired power plants. The power plant operators make high demands on the quality of solid recovered fuels. As the operational experience shows, a set of problems may be posed by co-combustion. The key factors in process engineering are firing technique and corrosion. A significant ecological key factor is the emission of pollutants into the atmosphere. The results of this study derive from research made on the basis of an extensive literature search as well as a survey on power plant operators in Germany. The data from operators was updated in spring 2011.

Appraisal of domestic solid waste generation, components, and the feasibility of recycling in Erbil, Iraq.

Solid waste collection and disposal are among the most vital services provided to about 700 770 residents of the city of Erbil in northern Iraq. As such, proper waste management systems that consider both the quantity and composition of domestic solid waste are strongly required to address the increasing amount of solid waste. Unfortunately, these essential data are not easily available. The present study sought to gather data on the quantity and composition of domestic solid waste collected from different quarters in Erbil, and the feasibility of recycling these wastes. The solid waste generation rate (GR), uncompacted density, and weight percentages of combustible and incombustible materials were determined based on the collected materials (i.e., food, plastic, paper, metal, glass and cloth). The results show that the average GR and uncompacted density were 0.654 kg capita(-1) day(-1) and 175.72 kg m(-3), respectively. The weight percentages of food, plastic, paper, metal, glass, and cloth as components of domestic solid waste were 79.34, 6.28, 5.9, 3.6, 3.42 and 1.45%, respectively.

Sources of microbial pathogens in municipal solid waste landfills in the United States of America.

Municipal solid waste (MSW) categories, as specified by United States Environmental Protection Agency (US EPA), were evaluated for their relative contribution of pathogenic viruses, bacteria, and protozoan parasites into MSW landfills from 1960 to 2007. The purpose of this study was to identify trends and quantify the potential contribution of pathogens in MSW as an aid to the assessment of potential public health risks. A review of the literature was conducted to estimate values for the concentrations of faecal indicator bacteria and pathogens in the major categories of MSW. The major sources of MSW contributing enteric pathogens were food waste, pet faeces, absorbent products, and biosolids. During the last 47 years, recycling of glass, metals, plastic, paper and some organic wastes in MSW has increased, resulting in a decreased proportion of these materials in the total landfilled MSW. The relative proportion of remaining waste materials has increased; several of these waste categories contain pathogens. For all potential sources, food waste contributes the greatest number of faecal coliforms (80.62%). The largest contribution of salmonellae (97.27%), human enteroviruses (94.88%) and protozoan parasites (97%) are expected to come from pet faeces. Biosolids from wastewater treatment sludge contribute the greatest number of human noroviruses (99.94%). By comparison, absorbent hygiene products do not appear to contribute significantly to overall pathogen loading for any group of pathogens. This is largely due to the relatively low volume of these pathogen sources in MSW, compared, for example, with food waste at almost 40% of total MSW.

Community level composting in a developing country: case study of KIWODET, Tanzania.

Environmentally sustainable waste management practices have a limited relevance and viability in developing countries. Despite a technological potential, composting initiatives often share this fate. Little is known about the functioning of community level composting, which is reportedly the optimal level for viable compost production. This paper presents a multidisciplinary analysis of factors influencing the success and failure of the composting initiative of KIWODET, a community based organization in Dar es Salaam, Tanzania. The results show that despite the ready availability and good compostability of the waste stream, not all fractions of municipal organic wastes qualify as feedstock. Negative consumer attitude hindered the acceptance of compost produced from residential wastes. KIWODET did manage to successfully implement a composting operation for commercial organic wastes. Their additional waste collection and sorting activities also contributed to an increased feedstock control as well as the integration of informal waste collecting activities. When KIWODET was forced to suspend its composting activities because of land use issues, their diversified waste sector activities proved crucial in reducing the negative financial impact on their overall performance. This paper emphasizes that successful composting initiatives can arise from local capacity in developing countries. However, the lack of municipal integration and support leaves such technically viable initiatives strongly vulnerable to external factors.

Municipal solid waste management in Phnom Penh, capital city of Cambodia.

This paper presents an overview of municipal solid waste management (MSWM) for both technical and regulatory arrangements in the municipality of Phnom Penh (MPP), Cambodia. Problems with the current MSWM are identified, and challenges and recommendations for future improvement are also given in this paper. MPP is a small city with a total area of approximately 374 km(2) and an urban population of about 1.3 million in 2008. For the last 14 years, average annual municipal solid waste (MSW) generated in MPP has increased rapidly from 0.136 million tons in 1995 to 0.361 million tons in 2008. The gross generation rate of MSW per capita was 0.74 kg day(-1). However, the per capita household waste generation was 0.487 kg day(- 1). At 63.3%, food waste is the predominant portion of generated waste, followed by plastics (15.5%), grass and wood (6.8%), and paper and cardboard (6.4%). The remaining waste, including metals, glass, rubber/leather, textiles, and ceramic/ stone, accounted for less than 3%. Waste recycling through informal sectors is very active; recycled waste accounted for about 9.3% of all waste generated in 2003. Currently, the overall technical arrangement, including storage and discharge, collection and transport, and disposal, is still in poor condition, which leads to environmental and health risks. These problems should be solved by improving legislation, environmental education, solid waste management facilities, and management of the waste scavengers.

Waste management in Greenland: current situation and challenges.

Waste management in Greenland (56,000 inhabitants) is characterized by landfilling, incineration and export to Denmark of small quantities of metals and hazardous waste. The annual amount of waste is estimated to about 50,000 tons but actual data are scarce. Data on the waste composition is basically lacking. The scattered small towns and settlements, the climate and the long transport distances between towns and also to recycling industries abroad constitute a complex situation with respect to waste management. The landfills have no collection of gas and leachate and the incinerators are small and equipped with only moderate flue gas cleaning technology. This report summarizes the current waste management situation in Greenland and identifies important challenges in improving the waste management.

Life cycle assessment of a household solid waste source separation programme: a Swedish case study.

The environmental impact of an extended property close source-separation system for solid household waste (i.e., a systems for collection of recyclables from domestic properties) is investigated in a residential area in southern Sweden. Since 2001, households have been able to source-separate waste into six fractions of dry recyclables and food waste sorting. The current system was evaluated using the EASEWASTE life cycle assessment tool. Current status is compared with an ideal scenario in which households display perfect source-separation behaviour and a scenario without any material recycling. Results show that current recycling provides substantial environmental benefits compared to a non-recycling alternative. The environmental benefit varies greatly between recyclable fractions, and the recyclables currently most frequently source-separated by households are often not the most beneficial from an environmental perspective. With optimal source-separation of all recyclables, the current net contribution to global warming could be changed to a net-avoidance while current avoidance of nutrient enrichment, acidification and photochemical ozone formation could be doubled. Sensitivity analyses show that the type of energy substituted by incineration of non-recycled waste, as well as energy used in recycling processes and in the production of materials substituted by waste recycling, is of high relevance for the attained results.

How to enhance humification during composting of separately collected biowaste: impact of feedstock and processing.

Conventional parameters (loss on ignition, total organic carbon, total nitrogen, C/N-ratio, respiration activity (RA4), compost status (= 'Rottegrad'), NH4-N and NO3-N) are not correlated to humification. At best, they provide information on the biological stability (status of degradation) of composts. Humic substances which are a source of stable organic matter and nutrients are discussed as a parameter describing compost quality. Thus, in the present research project a photometric method evaluating humic acids was used to characterize the quality of 211 Austrian and foreign composts made from source-separated collected biowaste or sewage sludge. Furthermore, parameters influencing the formation of humic acids during the rotting process were investigated by implementing rotting experiments in the laboratory as well as in composting plants. The analysed composts showed humic acid contents between 2.5 and 47 %, calculated on a organic dry matter (oDM) basis. In addition to the duration of treatment the main influence on humification was the feedstock used. Stabilized sewage sludge, biowaste after intensive anaerobic pre-treatment or biowaste with low reactivity (RA4) or uniform composition (e.g. mainly grass) showed a low formation of humic acids. For optimum humification the feedstock needed to contain components that are well balanced from scarcely to easily degradable compounds. Processing also influenced humification. Open windrow systems and reactor systems allow the same quality to be produced when operated well, but optimizing mineralization (e.g. very intensive aeration) showed negative effects. The positive condition required for humification is an unhurried (not too intense) degradation with long-lasting biological activity in which microbes have enough time to use the metabolic products of degradation for humification.

Research on residual strength characteristics of high water materials based on improved H-B criterion.

To develop a new gangue polymer filling material with low compressive ratio, this paper intends to add high water cementing material to the gangue for backfilling. Uniaxial and tri-axial bearing experiments were conducted to study its bearing characteristics and residual strength. Based on Hock-Brown model theory, it is proposed that friction angle φr can be introduced to substitute model parameter mi, and the degree of cohesion loss can characterize the value of s. So the improved H-B model is established to characterize the residual strength of materials with ductile failure characteristics. The results show that the compressive strength of high water filling material increases linearly corresponding to the rise of confining pressure, and its strength characteristics conform to Mohr-Coulomb strength criterion. The ductile failure characteristics of the sample endow it with high residual strength, which in turn qualifies it for underground filling. After the introduction of cohesion and friction angle, the improved H-B criterion can fit the residual strength curve of the high water filling material more competently. The fitting coefficient of the samples with three water contents is 1.00, 0.99, and 1.00, respectively. The improved H-B model of residual strength demonstrates the change rule of residual strength of the samples corresponding to the change of confining pressure; under tri-axial loading, the angle between fracture surface and axial direction becomes larger as the confining pressure rises; and the failure mode of the material transforms from splitting failure to shear failure.

Characterisation and composition of municipal solid waste (MSW) generated in Sangamner City, District Ahmednagar, Maharashtra, India.

This paper deals with the characteristics and composition of municipal solid waste (MSW) generated in Sangamner city. The composition of solid waste was studied by segregating it into different component, i.e., kitchen waste, paper, earth and fine material, slaughter house waste, leaves, metals, etc. These components were categorised into organic waste and inorganic waste. It was observed that Sangamner city produces around 61% organic waste, and the rest is inorganic waste. The characteristics of organic solid waste, i.e., pH, electrical conductivity, moisture content, organic carbon, nitrogen, phosphorus and potassium were evaluated. The analysis of organic content of MSW indicates that it is good source of nutrients for the agriculture sector whereas inorganic material can be used for landfill.

Report: Maximizing recycling participation to reduce waste to landfill: a study of small to medium-sized enterprises in Hobart, Tasmania, Australia.

Small to medium-sized enterprises (SMEs) in Hobart, Tasmania, Australia face many barriers to recycling participation. This study first investigated the volumes and types of waste produced by SMEs. Significant barriers were then identified and key motivators to recycle examined. Using the Australia New Zealand Standard of Industrial Classification, stratified sampling of SMEs (n = 436) was undertaken. Inadequate storage space, paucity of readily available information on recycling services and the lack of staff allocated to sort and recycle were identified as major barriers. Cardboard, paper and plastic waste were produced in large volumes with only a small percentage being recycled and these were identified as target areas for local government. Recommendations include the appointment of a dedicated recycling officer to maximize recycling participation for the reduction of waste to landfill and to undertake further research on minimizing recycling costs.

Life-cycle assessment (EASEWASTE) of two municipal solid waste incineration technologies in China.

The environmental profile of two municipal solid waste incineration (MSWI) technologies with semi-dry flue gas cleaning, namely grated firing incinerators (GFI) and fluidised bed incinerators (FBI) that are commonly used in China were evaluated and compared by life-cycle assessment (LCA) using the EASEWASTE model. All emissions of key pollutants as well as energy, resource and material inputs and outputs associated with the two MSWI technologies were determined and the corresponding environmental impact potentials were modelled. Incineration of MSW with a lower heating value (LHV) around 4.5 MJ kg(-1) demands that auxiliary fuel is used, and both GFI and FBI caused environmental loads by contributing with environmental impact potentials in most categories except for some saving in global warming (GW100) and hazardous waste (HW). Coal combustion in FBI is a main contributor to the environmental impact potentials and thus should always be limited to a minimum. Auxiliary fuels can be avoided when the LHV of MSW is higher than 5-6 MJ kg(- 1). For all scenarios, GFI saves more global warming potentials than FBI due to its higher net power generation from combustion of MSW itself. Leachate from the bunker could be sprayed into the furnace for evaporation under high temperature, as an alternative to waste-water treatment, without major changes in the environmental profile of the incinerator. The presented evaluations may contribute to a more balanced environmental assessment of the two incineration technologies with respect to incineration of MSW with low heating values as often found in Asia and China.