Physical relation and mechanism of ultrasonic bactericidal activity on pathogenic E. coli with WPI.

OBJECTIVE: This study aimed to investigate the physical relation and mechanism of bactericidal activity on pathogenic E. coli by ultrasonic field with whey protein isolate (WPI). METHODS: Ultrasound treatment was performed under the conditions of intensity at 65 W/cm2, pulse duty ratio at 0.5 for 0-15 min with WPI concentration ranged from 0 to 10%. Viscosity, granularity, surface hydrophobicity, free radical scavenging activity, and thermal denaturation were assessed by rotational viscometer, Malvern Mastersizer 2000 particle size analyzer, fluorescent probe ANS method, DPPH method, and differential scanning calorimetry, respectively. RESULTS: The thermal denaturation of WPI was not altered by ultrasound field, but the viscosity of WPI was increased upon 10 min treatment. Additionally, its ability to scavenge free radicals and hydrophobicity were increased. The result also showed that the bacteria viability was improved by WPI during ultrasound treatment. However, the WPI protection was decreased by the prolonged treatment. CONCLUSION: Ultrasound treatment resulted in the increasing of the viscosity, free radicals scavenging activity and hydrophobicity of WPI which led to reduced bactericidal activity on E. coil, while WPI protection was disintegrated by prolonged treatment.

Elucidating nuclear motions in a plant sunscreen during photoisomerization through solvent viscosity effects.

We explore the effects of solvent viscosity on the trans-cis photoisomerization of sinapoyl malate, which is utilized as a sunscreen molecule in plants. Our results demonstrate that viscosity has a significant effect on the timescale for isomerization, providing insight into the nuclear motions involved. The ramifications of these findings are discussed with reference to sinapoyl malate's in vivo photoprotection properties.

Microwave flow and conventional heating effects on the physicochemical properties, bioactive compounds and enzymatic activity of tomato puree.

BACKGROUND: Thermal processing causes a number of undesirable changes in physicochemical and bioactive properties of tomato products. Microwave (MW) technology is an emergent thermal industrial process that offers a rapid and uniform heating, high energy efficiency and high overall quality of the final product. The main quality changes of tomato puree after pasteurization at 96 ± 2 °C for 35 s, provided by a semi-industrial continuous microwave oven (MWP) under different doses (low power/long time to high power/short time) or by conventional method (CP) were studied. RESULTS: All heat treatments reduced colour quality, total antioxidant capacity and vitamin C, with a greater reduction in CP than in MWP. On the other hand, use of an MWP, in particular high power/short time (1900 W/180 s, 2700 W/160 s and 3150 W/150 s) enhanced the viscosity and lycopene extraction and decreased the enzyme residual activity better than with CP samples. For tomato puree, polygalacturonase was the more thermo-resistant enzyme, and could be used as an indicator of pasteurization efficiency. CONCLUSION: MWP was an excellent pasteurization technique that provided tomato puree with improved nutritional quality, reducing process times compared to the standard pasteurization process. © 2016 Society of Chemical Industry.

Fifty hertz magnetic fields individually affect chromatin conformation in human lymphocytes: dependence on amplitude, temperature, and initial chromatin state.

Effects of magnetic field (MF) at 50 Hz on chromatin conformation were studied by the method of anomalous viscosity time dependence (AVTD) in human lymphocytes from two healthy donors. MF within the peak amplitude range of 5-20 µT affected chromatin conformation. These MF effects differed significantly between studied donors, and depended on magnetic flux density and initial condensation of chromatin. While the initial state of chromatin was rather stable in one donor during one calendar year of measurements, the initial condensation varied significantly in cells from another donor. Both this variation and the MF effect depended on temperature during exposure. Despite these variations, the general rule was that MF condensed the relaxed chromatin and relaxed the condensed chromatin. Thus, in this study we show that individual effects of 50 Hz MF exposure at peak amplitudes within the range of 5-20 µT may be observed in human lymphocytes in dependence on the initial state of chromatin and temperature.

Partial velocity slip effect on working magneto non-Newtonian nanofluids flow in solar collectors subject to change viscosity and thermal conductivity with temperature.

Solar thermal collectors distribute, capture, and transform the solar energy into a solar thermal concentration device. The present paper provides a mathematical model for analyzing the flow characteristics and transport of heat to solar collectors (SCs) from non-Newtonian nanofluids. The non-Newtonian power-law scheme is considered for the nanofluid through partial slip constraints at the boundary of a porous flat surface. The nanofluid is assumed to differ in viscosity and thermal conductivity linearly with temperature changes and the magnetic field is appliqued to the stream in the transverse direction. The method of similarity conversion is used to convert the governing structure of partial differential formulas into the system of ordinary differential ones. Using the Keller box procedure, the outcoming ordinary differential formulas along with partial slip constraints are numerically resolved. A discussion on the flowing and heat transport characteristics of nanofluid influenced by power law index, Joule heating parameter, MHD parameter and slip parameters are included from a physical point of view. Comparison of temperature profiles showed a marked temperature increase in the boundary layer due to Joule heating. The thickness of the motion boundary-layer is minimized and the transport of heat through boundary-layer is improved with the partial slip velocity and magnetic parameters rising. Finally, With an increase in the Eckert number, the distribution of temperature within boundary layer is increased.

Photo-elastic properties of the wing imaginal disc of Drosophila.

In the study of developmental biology, the physical properties and constraints of the developing tissues are of great importance. In spite of this, not much is known about the elastic properties of biologically relevant tissues that are studied in biology labs. Here, we characterize properties of the wing imaginal disc of Drosophila, which is a precursor organ intensely studied in the framework of growth control and cell polarity. In order to determine the possibility of measuring mechanical stresses inside the tissue during development, we quantify the photo-elastic properties of the tissue by direct mechanical manipulation. We obtain a photo-elastic constant of 2 x 10(-10) Pa(-1).

Effect of ionizing radiation on some quality attributes of nutraceutically valued lotus seeds.

Radiation processing has been employed successfully for value addition of food and agricultural products. Preliminary studies were undertaken to evaluate the changes induced by ionizing radiation (up to 30 kGy), in the form of gamma irradiation and electron beam irradiation, on some quality attributes and nutritive values of nutraceutically valued lotus seeds. Significant loss in seed firmness was recorded between control and irradiated seeds, irrespective of radiation source. Similarly, the specific viscosity of irradiated lotus seeds decreased significantly up to a dose of 7.5 kGy. Starch increased after exposure to gamma or electron beam irradiation, whereas the total phenolic contents were decreased. Gamma irradiation revealed an enhancement in protein, while the electron beam showed a decrease. Partial oxidation of the seeds during radiation treatments might have occurred as evidenced from the decomposition profiles (thermogravimetry) during heating. It is evident that ionizing radiation brought about significant and variable changes in the quality and nutritive values of lotus seed. Further exploration of this technology for safety and quality is warranted.

Concentration-dependent viscosity and thermal radiation effects on MHD peristaltic motion of Synovial Nanofluid: Applications to rheumatoid arthritis treatment.

BACKGROUND AND OBJECTIVE: The biomedical fluid which fills the Synovial joint cavity is called Synovial fluid which behaves as in the fluid classifications to Non-Newtonian fluids. Also it's described as a several micrometers thick layer among the interstitial cartilages with very low friction coefficient. Consequently, the present paper opts to investigate the influence of the concentration-dependent viscosity on Magnetohydrodynamic peristaltic flow of Synovial Nanofluid in an asymmetric channel in presence of thermal radiation effect. METHOD: Our problem is solved for two models, in the first model which referred as Model-(I), viscosity is considered exponentially dependent on the concentration. Model-(2), Shear thinning index is considered as a function of concentration. Those models are introduced for the first time in peristaltic or Nanofluid flows literature. The governing problem is reformulated under the assumption of low Reynolds number and long wavelength. The resulting system of equations is solved numerically with the aid of Parametric ND Solve. RESULTS: Detailed comparisons have been made between Model-(I) and Model-(2) and found unrealistic results between them. Results for velocity, temperature and nanoparticle concentration distributions as well as pressure gradient and pressure rise are offered graphically for different values of various physical parameters. CONCLUSIONS: Such models are applicable to rheumatoid arthritis (RA) treatment. Rheumatoid arthritis patients can be treated by applying the magnetic field on an electrically conducting fluid, due to the movement of the ions within the cell which accelerates the metabolism of fluids.

Short-term effects of X-ray on viscoelastic properties of epithelial cells.

Examining the effects of ionizing radiation on the living cell is significant due to its usage in recent centuries. Investigations into the long- and short-term effects of ionizing radiation began simultaneously with its discovery. Previous studies were done on the effects of radiation on cell DNA or the biochemical cycle based on the electromagnetic radiation wavelength, intensity, and exposure time. Considering some dependent parameters like cell communication, the differentiation and the mechanical interactions of intercellular environment, and cell mechanical properties, the effects of ionizing radiation on the viscoelastic properties of cells seem to be important. The current research investigated the short-term biomechanical effects of ionizing radiation and examined the mechanical properties of cells using magnetic tweezer cytometry with nanomagnetic particles. To evaluate these effects, cells were incubated with nanomagnetic particles and then separated into controlled and irradiated groups. A 3 mGy cm2 X-ray was radiated to the irradiated group for 0.02 s. The dishes of both groups were inserted into magnetic tweezer cytometry for applying a magnetic force pulse, and the cell membrane displacement was detected by an image processing system. The creep response of the membrane was determined for viscoelastic model curve fitting. The frequency responses of the model for both groups were calculated. The results showed that radiation could decrease cell extensibility from 0.084 ± 0.001 to 0.019 ± 0.001 µm and change the storage and loss modulus as the indicator of the viscoelastic property of the material. This research explains that radiation could affect cellular mechanical properties.

Immunomodulatory effect of γ-irradiated Astragalus polysaccharides on immunosuppressed broilers.

In this study, we irradiated Astragalus polysaccharides (APS) using 25 kGy 60 Co γ ray to obtain γ-irradiated Astragalus polysaccharides (IAPS) and then investigated the effects of IAPS on growth performance and immune function of cyclophosphamide (CPM)-treated broilers. The physicochemical properties of APS and IAPS (molecular weight, water solubility, viscosity, morphological and structural properties) were evaluated. Then, 384 one-day-old Arbor Acres broiler chicks with similar initial weight were randomly assigned into 6 groups: the non-treated group (control), and CPM-treated groups were fed either a basal diet or the diets containing 900 mg/kg APS, or 900, 600, 300 mg/kg IAPS, respectively. On days 16, 18, and 20, all broilers except for the control group were intramuscularly injected with 0.5 ml CPM (40 mg/kg·BW). Broilers in the control group were intramuscularly injected with 0.5 ml sterilized saline (0.75%, wt/vol). This trial lasted for 21 days. The physicochemical treatment showed that γ irradiation could decrease the molecular weight and viscosity, and increase the water solubility of APS (p < 0.05), whereas the structural properties of APS was not affected. In the animal trial, 900 mg/kg APS or 900, 600 mg/kg IAPS relieved the decreased growth performance, thymus index, T lymphocytes proliferation, serum IgG concentration, NOS activity and the increased blood heterophil:lymphocyte ratio in CPM-treated broilers (p < 0.05). CPM-induced decreases in B lymphocytes proliferation and serum IgM concentration were only increased by IAPS at 900 mg/kg (p < 0.05). Overall, both APS and IAPS alleviated CPM-induced immunosuppression. Especially, IAPS possessed better immunomodulatory effect than APS, indicating that γ irradiation could be used as an effective method to enhance the immunomodulatory activity of APS.

Synthesis and viscoelastic characterization of novel hydrogels generated via photopolymerization of 1,2-epoxy-5-hexene modified poly(vinyl alcohol) for use in tissue replacement.

Hydrogels have been proposed as candidates for tissue replacement; however, current systems are often highly susceptible to hydrolytic degradation and have not been shown to mimic the viscoelastic behavior of the native tissue when subjected to dynamic loading conditions. In the present work, 1,2-epoxy-5-hexene modified poly(vinyl alcohol) was crosslinked via photopolymerization to generate non-degradable hydrogels with mechanical properties and network characteristics that could be modulated through variation in the type and percentage of a monomeric additive. Complex shear moduli obtained from dynamic frequency sweeps in torsional shear were used to exemplify the differences in the viscoelastic behavior of the materials, and the corresponding changes in crosslink density were determined by rubber elasticity theory. Hydrolysis resistance was assessed by monitoring variations in the moduli of hydrogels submerged in Hank's balanced salt solution for progressively longer periods of time. Over the time-frame of the experiment, no change in the viscoelastic behavior was observed. Direct contact assays and elution tests were used to demonstrate that the system was non-cytotoxic. This study represents a successful attempt to generate a non-degradable hydrogel system with viscoelastic behavior that can be readily modulated to match that of soft biological tissues for use in tissue replacement.

Radiation therapy affects the mechanical behavior of human umbilical vein endothelial cells.

Radiation therapy has been widely utilized as an effective method to eliminate malignant tumors and cancerous cells. However, subjection of healthy tissues and the related networks of blood vessels adjacent to the tumor area to irradiation is inevitable. The aim of this study was to investigate the consequent effects of fractionation radiotherapy on the mechanical characteristics of human umbilical vein endothelial cells (HUVECs) through alterations in cytoskeleton organization and cell and nucleus morphology. In order to simulate the clinical condition of radiotherapy, the HUVECs were exposed to the specific dose of 2 Gy for 1-4 times among four groups with incremental total dose from 2 Gy up to 8 Gy. Fluorescence staining was performed to label F-actin filaments and nuclei. Micropipette aspiration and standard linear solid model were employed to evaluate the elastic and viscoelastic characteristics of the HUVECs. Radiotherapy significantly increased cell elastic moduli. Due to irradiation, instantaneous and equilibrium Young's modulus were also increased. Radiotherapy diminished HUVECs viscoelastic behavior and shifted their creep compliance curves downward. Furthermore, gamma irradiation elevated the nuclei sizes and to a lesser extent the cells sizes resulting in the accumulation of F-actin filaments within the rest of cell body. Endothelial stiffening correlates with endothelial dysfunction, hence the results may be helpful when the consequent effects of radiotherapy are the focus of concern.

Effect of gamma irradiation on the physicochemical and structural properties of plant seed gums.

The objective of the study was to evaluate the effect of irradiation (0-5 kGy) on the physicochemical properties of two seed gums (guar and locust bean gum). The Hunter color parameters changed upon irradiation, namely "L" value decreased, whereas "a" and "b" values, i.e. redness and yellowness, increased. Irradiation reduced the final viscosity of gums at neutral and acidic pH. Increase in irradiation dose (0-5 kGy) increased the water absorption in the range of 11.75-14.61g/g and 20.04-23.99g/g in guar gum and locust bean gum, respectively. Rheological study of the gums revealed their gel behaviour with higher values of G' than G". G' in native guar gum was observed to increase in the range of 880.39-1332.29Pa while G" increased in the range of 194.21-239.77Pa as the test frequency was raised from 14.6-100s-1. In native locust bean gum, the G' and G" varied in the range of 476.50-1230.50Pa and 300.65-380.30Pa, respectively, under the applied frequency sweep. FT-IR revealed the presence of CH, COOH and CO groups in the guar as well as locust bean gum, in addition to the uronic acid and pyranose rings. The absorption of the functional groups declined upon irradiation.

Comparison of Conventional and Microwave Assisted Heating on Carbohydrate Content, Antioxidant Capacity and Postprandial Glycemic Response in Oat Meals.

Minimally processed cereal breakfast products from whole grain entered the market due to consumer demand of more nutritional food with more controlled sugar release. However, the subsequent processing of such products with different cooking methods in the consumer's kitchen may lead to significant differentiation of their nutritional value. Therefore, the evaluation of the impact of frequently used cooking methods on a final quality of breakfast cereals meal is needed. The present study investigates how the two different methods of heating, conventional and microwave (MW) assisted, affect the carbohydrate content, profile and resulting glycemic index of so prepared food as well as the antioxidant activity of meals. Two products available on the market-oat bran and flakes-were used. The highest starch content in fluid phase of oatmeal was detected in samples heated for 3 min with microwaves, regardless the type. The lowest starch content was obtained for 5 min MW heated flakes sample. The total content of glucose was about 1.5 times lower in bran vs. flakes oatmeal. The highest ß-glucan content in fluid fraction was also observed for bran meal but its release was independent of applied conditions.

Effect of gamma irradiation on structure, physicochemical and immunomodulatory properties of Astragalus polysaccharides.

Astragalus polysaccharides (APS) were treated with different gamma irradiation doses (10, 25, 50, 100 and 150 kGy) to investigate the effects of gamma radiation processing on structure, physicochemical and immunomodulatory properties. The results revealed both the number-average and weight-average molecular weight of APS significantly decreased with increasing irradiation dose, whereas the solubility was increased after irradiation. A decrease in the apparent viscosity, as well as an increase in amount of small fragments of APS granules was also observed with increasing irradiation dose. FT-IR spectra indicated that gamma irradiation introduced no significant changes into the functional group status of APS. High irradiation dose (>50 kGy) caused a significant increase of yellowness and a slightly decrease of thermal stability of APS. Further, the immunomodulatory activity of irradiated APS was evaluated on Caco2 cells. APS irradiated at dose of 25 kGy exhibited the highest ability to induce nitric oxide production and up-regulate the mRNA expression of inflammatory cytokines, occludin, zonula occludens protein-1 (ZO-1) and toll-like receptor 4 (TLR4), as well as the protein expression of ZO-1 and TLR4. These findings indicate that gamma irradiation modification with a proper dose enhance immunomodulatory activity of APS by improving physicochemical properties without changing the functional groups.

Noninvasive assessment of the rheological behavior of human organs using multifrequency MR elastography: a study of brain and liver viscoelasticity.

MR elastography (MRE) enables the noninvasive determination of the viscoelastic behavior of human internal organs based on their response to oscillatory shear stress. An experiment was developed that combines multifrequency shear wave actuation with broad-band motion sensitization to extend the dynamic range of a single MRE examination. With this strategy, multiple wave images corresponding to different driving frequencies are simultaneously received and can be analyzed by evaluating the dispersion of the complex modulus over frequency. The technique was applied on the brain and liver of five healthy volunteers. Its repeatability was tested by four follow-up studies in each volunteer. Five standard rheological models (Maxwell, Voigt, Zener, Jeffreys and fractional Zener model) were assessed for their ability to reproduce the observed dispersion curves. The three-parameter Zener model was found to yield the most consistent results with two shear moduli mu(1) = 0.84 +/- 0.22 (1.36 +/- 0.31) kPa, mu(2) = 2.03 +/- 0.19 (1.86 +/- 0.34) kPa and one shear viscosity of eta = 6.7 +/- 1.3 (5.5 +/- 1.6) Pa s (interindividual mean +/- SD) in brain (liver) experiments. Significant differences between the rheological parameters of brain and liver were found for mu(1) and eta (P < 0.05), indicating that human brain is softer and possesses a higher viscosity than liver.

Acceptance of different types of thickeners, with and without flavoring, in hospitalized patients with dysphagia - a pilot study / Aceptación de diferentes tipos de espesante, con y sin saborizante, en pacientes con disfagia hospitalizados: un estudio piloto

Introduction: the goal of this work was to evaluate the acceptance of various types of thickeners, specifically modified starch thickener and gum thickener, both with and without flavoring. Patients and methods: a randomized sample of 40 hospitalized patients with oropharyngeal dysphagia was recruited. The taste, smell, and appearance of each type of thickener were evaluated, as well as the volume of liquid ingested by the patients taking each type of thickener (modified starch thickener vs. gum thickener, both with and without flavoring).Results: the overall acceptance of gum thickener was significantly higher than that of modified starch thickener (7.45 (1.57) vs. 5.10 (2.43), respectively; p = 0.001). When a food flavor was added to the thickened water, the overall rating of the product was higher than when no flavor was added (7.70 (1.53) vs. 4.85 (2.16); p < 0.001). The difference between the daily volume of water consumed by the patients who received gum thickeners (928.33 (331.27) mL) and those who received starch thickeners (670.00 (288.35) mL) was statistically significant (p = 0.012). Patient consumption was also higher when flavoring was added as compared to when it was not (943.33 (302.45) mL) vs. (655.00 (304.60) mL; p = 0.005). Conclusion: the acceptances of the thickener and of water intake by patients with dysphagia were both significantly higher when using gum thickeners compared to starch thickeners, and when adding flavoring. (AU)

Introducción: el objetivo de este trabajo fue evaluar la aceptación de varios tipos de espesantes (almidón modificado frente a gomas) con y sin saborizante. Pacientes y métodos: se reclutaron 40 pacientes hospitalizados con disfagia orofaríngea. Se evaluaron el sabor, el olor y la apariencia de cada tipo de espesante, así como el volumen de líquido ingerido por los pacientes que tomaban cada tipo de espesante (espesante de almidón modificado vs. espesante de goma, ambos con o sin saborizante). Resultados: la aceptación general del espesante de goma fue significativamente mayor que la del almidón modificado (7,45 (1,57) vs. 5,10 (2,43); p = 0,001). Cuando se añadió un saborizante al agua espesada, la calificación general fue mejor (7,70 (1,53) frente a 4,85 (2,16); p < 0,001). La diferencia entre el volumen diario de agua consumida por los pacientes que recibieron espesantes de goma (928,33 (331,27) ml) y los que recibieron espesantes de almidón (670,00 (288,35) ml) fue estadísticamente significativa (p = 0,012). El consumo de líquido también fue mayor cuando se agregó el saborizante (943,33 (302,45) ml frente a 655,00 (304,60) ml; p = 0,005). Conclusión: la aceptación del espesante y la ingesta de agua por parte de los pacientes con disfagia fueron significativamente mayores cuando se utilizaron espesantes de goma, en comparación con los espesantes de almidón, y al agregar saborizantes. (AU)

Assessment of UVA-Riboflavin Corneal Cross-Linking Using Small Amplitude Oscillatory Shear Measurements.

PURPOSE: The effect of ultraviolet (UV)-riboflavin cross-linking (CXL) has been measured primarily using the strip extensometry technique. We propose a simple and reliable methodology for the assessment of CXL treatment by using an established rheologic protocol based on small amplitude oscillatory shear (SAOS) measurements. It provides information on the average cross-link density and the elastic modulus of treated cornea samples. METHODS: Three fresh postmortem porcine corneas were used to study the feasibility of the technique, one serving as control and two receiving corneal collagen cross-linking treatment. Subsequently, five pairs of fresh postmortem porcine corneas received corneal collagen cross-linking treatment with riboflavin and UVA-irradiation (370 nm; irradiance of 3 mW/cm2) for 30 minutes (Dresden protocol); the contralateral porcine corneas were used as control samples. After the treatment, the linear viscoelastic moduli of the corneal samples were measured using SAOS measurements and the average cross-linking densities extracted. RESULTS: For all cases investigated, the dynamic moduli of the cross-linked corneas were higher compared to those of the corresponding control samples. The increase of the elastic modulus of the treated samples was between 122% and 1750%. The difference was statistically significant for all tested samples (P = 0.018, 2-tailed t-test). CONCLUSIONS: We report a simple and accurate methodology for quantifying the effects of cross-linking on porcine corneas treated with the Dresden protocol by means of SAOS measurements in the linear regime. The measured dynamic moduli, elastic and viscous modulus, represent the energy storage and energy dissipation, respectively. Hence, they provide a means to assess the changing physical properties of the cross-linked collagen networks after CXL treatment.

Interfacial Rheological Properties of Contrast Microbubble Targestar P as a Function of Ambient Pressure.

In this Technical Note, we determine the interfacial rheological parameters of the encapsulation of the contrast agent Targestar P using ultrasound attenuation. The characteristic parameters are obtained according to two interfacial rheological models. The properties-surface dilatational elasticity (0.09 ± 0.01 N/m) and surface dilatational viscosity (8 ± 0.1E-9 N·s/m)-are found to be of similar magnitude for both models. Contrast microbubbles experience different ambient pressure in different organs. We also measure these parameters as functions of ambient pressure using attenuation measured at different overpressures (0, 100 and 200 mm Hg). For each value of ambient hydrostatic pressure, we determine the rheological properties, accounting for changes in the size distribution caused by the pressure change. We discuss different models of size distribution change under overpressure: pure adiabatic compression or gas exchange with surrounding medium. The dilatational surface elasticity and viscosity are found to increase with increasing ambient pressure.

Design, microfabrication, and characterization of a moulded PDMS/SU-8 inkjet dispenser for a Lab-on-a-Printer platform technology with disposable microfluidic chip.

In this paper, we present a disposable inkjet dispenser platform technology and demonstrate the Lab-on-a-Printer concept, an extension of the ubiquitous Lab-on-a-Chip concept, whereby microfluidic modules are directly integrated into the printhead. The concept is demonstrated here through the integration of an inkjet dispenser and a microfluidic mixer enabling control over droplet composition from a single nozzle in real-time during printing. The inkjet dispenser is based on a modular design platform that enables the low-cost microfluidic component and the more expensive actuation unit to be easily separated, allowing for the optional disposal of the former and reuse of the latter. To limit satellite droplet formation, a hydrophobic-coated and tapered micronozzle was microfabricated and integrated with the fluidics to realize the dispenser. The microfabricated devices generated droplets with diameters ranging from 150-220 µm, depending mainly on the orifice diameter, with printing rates up to 8000 droplets per second. The inkjet dispenser is capable of dispensing materials with a viscosity up to ∼19 mPa s. As a demonstration of the inkjet dispenser function and application, we have printed type I collagen seeded with human liver carcinoma cells (cell line HepG2), to form patterned biological structures.