Effects of temperature on nitrifying membrane-aerated biofilms: An experimental and modeling study.

ABSTRACT

Temperature is known to have an important effect on the morphology and removal fluxes of conventional, co-diffusional biofilms. However, much less is known about the effects of temperature on membrane-aerated biofilm reactors (MABRs). Experiments and modeling were used to determine the effects of temperature on the removal fluxes, biofilm thickness and morphology, and biofilm microbial community structure of nitrifying MABRs. Steady state tests were carried out at 10 °C and 30 °C. MABRs grown at 30 °C had higher ammonium removal fluxes (5.5 ± 0.9 g-N/m2/day at 20 mgN/L) than those grown at 10 °C (3.4 ± 0.2 g-N/m2/day at 20 mgN/L). The 30 °C biofilms were thinner and rougher, with a lower protein to polysaccharides ratio (PN/PS) in their extracellular polymeric substance (EPS) matrix and greater amounts of biofilm detachment. Based on fluorescent in-situ hybridization (FISH), there was a higher relative abundance of nitrifying bacteria at 30 °C than at 10 °C, and the ratio of AOB to total nitrifiers (AOB + NOB) was higher at 30 °C (95.1 ± 2.3%) than at 10 °C (77.2 ± 8.6 %). Anammox bacteria were more abundant at 30 °C (16.6 ± 3.7 %) than at 10 °C (6.5 ± 2.4 %). Modeling suggested that higher temperatures increase ammonium oxidation fluxes when the biofilm is limited by ammonium. However, fluxes decrease when oxygen becomes limited, i.e., when the bulk ammonium concentrations are high, due to decreased oxygen solubility. Consistent with the experimental results, the model predicted that the percentage of AOB to total nitrifiers at 30 °C was higher than at 10 °C. To investigate the effects of temperature on biofilm diffusivity and O2 solubility, without longer-term changes in the microbial community, MABR biofilms were grown to steady state at 20 °C, then the temperature changed to 10 °C or 30 °C overnight. Higher ammonium oxidation fluxes were obtained at higher temperatures 1.91 ± 0.24 g-N/m2/day at 10 °C and 3.19 ± 0.40 g-N/m2/day at 30 °C. Overall, this work provides detailed insights into the effect of temperature on nitrifying MABRs, which can be used to better understand MABR behavior and manage MABR reactors.