Moderate Salinity Stress Affects Rice Quality by Influencing Expression of Amylose- and Protein-Content-Associated Genes.

Salinity is an environmental stress that severely impacts rice grain yield and quality. However, limited information is available on the molecular mechanism by which salinity reduces grain quality. In this study, we investigated the milling, appearance, eating and cooking, and nutritional quality among three japonica rice cultivars grown either under moderate salinity with an electrical conductivity of 4 dS/m or under non-saline conditions in a paddy field in Dongying, Shandong, China. Moderate salinity affected rice appearance quality predominantly by increasing chalkiness rate and chalkiness degree and affected rice eating and cooking and nutritional quality predominantly by decreasing amylose content and increasing protein content. We compared the expression levels of genes determining grain chalkiness, amylose content, and protein content in developing seeds (0, 5, 10, 15, and 20 days after flowering) of plants grown under saline or non-saline conditions. The chalkiness-related gene Chalk5 was up-regulated and WHITE-CORE RATE 1 was repressed. The genes Nuclear factor Y and Wx, which determine amylose content, were downregulated, while protein-content-associated genes OsAAP6 and OsGluA2 were upregulated by salinity in the developing seeds. These findings suggest some target genes that may be utilized to improve the grain quality under salinity stress conditions via gene-pyramiding breeding approaches.

Impact of soluble soybean polysaccharide on the gelatinization and retrogradation of corn starches with different amylose content.

Polysaccharides have a significant impact on the physicochemical properties of starch, and the objective of this study was to examine the effect of incorporating soluble soybean polysaccharide (SSPS) on the gelatinization and retrogradation of corn starches (CS) with varying amylose content. In contrast to high-amylose corn starch (HACS), the degree of gelatinization of waxy corn starch (WCS) and normal corn starch (NCS) decreased with the addition of SSPS. The inclusion of SSPS resulted in reduced swelling power in all CS, and led to a decrease in gel hardness of the starches. The intermolecular forces between SSPS and CS were primarily hydrogen bonding, and a gel network structure was formed, thereby retarding the short-term and long-term retrogradation of CS. Scanning electron microscopy results revealed that the addition of SSPS in starches led to a loose network structure with larger poles and a reduced ordered structure after retrogradation, as observed from the cross-section of formed gels. These findings suggested that SSPS has great potential for applications in starchy foods, as it can effectively retard both gelatinization and retrogradation of starches.

A multihole nozzle controls recrystallization of high-moisture extruded maize starches: Effect of cooling die temperature.

Hot extrusion is utilized for starch modification due to its high mechanical input and product output. Amylose recrystallization commences and primarily depends on intermolecular interactions after conventional extrusion. Hence, the design of a new component based on the existed extrusion system was aimed at facilitating molecular aggregation, potentially accelerating starch recrystallization. In this study, a nozzle sheet comprising 89 holes was integrated into the cooling die. The impact of the multihole nozzle on the structure and in vitro digestibility of extruded maize starches after retrogradation was examined at varying cooling die temperatures. The results showed that the nozzle-assembled extrusion system operated effectively without additional mechanical or yield losses. At 50 °C, the crystallinity of nozzle-produced starch was approximately 70 % higher than that of conventionally extruded starch, predominantly owing to the B-type allomorph of the amylose double helix. Recrystallized amylopectin was also found in these nozzle-produced starches, indicating that multihole nozzle-induced uniaxial elongational flow resulted in the rapid starch crystallization. The increased formation of recrystallized amylose led to improved molecular order in starch structures while reducing their digestibility. These findings revealed a new approach to improve starch crystallinity by incorporating a nozzle sheet in the extrusion process.

Hydrophobization of surfaces on cellulose nanofibers by enzymatic grafting of partially 2-deoxygenated amylose.

Recently, attention has been paid to cellulose nanofibers, such as 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers (TOCN), as new bio-based materials. In addition, hydrophobized surface on TOCNs can be expected to provide new applications. Based on our previous finding that partially 2-deoxygenated (P2D)-amylose, which was synthesized by GP-catalyzed enzymatic copolymerization of D-glucal with α-d-glucose 1-phosphate (Glc-1-P) as comonomers, was hydrophobic, in this study, hydrophobization of surfaces on TOCNs was investigated by the GP-catalyzed enzymatic grafting of P2D-amylose chains on TOCNs. After maltooligosaccharide primers were modified on TOCNs, the GP-catalyzed enzymatic copolymerization of D-glucal with Glc-1-P was performed for grafting of P2D-amylose chains. 1H NMR spectroscopic analysis confirmed the production of P2D-amylose-grafted TOCNs with different 2-deoxyglucose/Glc unit ratios. The powder X-ray diffraction profiles of the products indicated that the entire crystalline structures were strongly affected by the unit ratios and chain lengths of the grafted polysaccharides. The SEM images observed differences in nanofiber diameter in the reaction solutions and surface morphology after film formation, due to grafting of P2D-amylose chains from TOCNs. The water contact angle measurement of a cast film prepared from the product indicated its hydrophobicity.

Changes in the structure and enzyme binding of starches during in vitro enzymatic hydrolysis using mammalian mucosal enzyme mixtures.

Starches are hydrolyzed into monosaccharides by mucosal α-glucosidases in the human small intestine. However, there are few studies assessing the direct digestion of starch by these enzymes. The objective of this study was to investigate the changes in the structure and enzyme binding of starches during in vitro hydrolysis by mammalian mucosal enzymes. Waxy maize (WMS), normal maize (NMS), high-amylose maize (HAMS), waxy potato (WPS), and normal potato (NPS) starches were examined. The order of the digestion rate was different compared with other studies using a mixture of pancreatic α-amylase and amyloglucosidase. NPS was digested more than other starches. WPS was more digestible than WMS. Hydrolyzed starch from NPS, NMS, WPS, WMS, and HAMS after 24 h was 66.4, 64.2, 61.7, 58.7, and 46.2 %, respectively. Notably, a significant change in the morphology, reduced crystallinity, and a decrease in the melting enthalpy of the three starches (NPS, NMS, and WPS) after 24 h of hydrolysis were confirmed by microscopy, X-ray diffraction, and differential scanning calorimetry, respectively. The bound enzyme fraction of NPS, NMS, and WPS increased as hydrolysis progressed. In contrast, HAMS was most resistant to hydrolysis by mucosal α-glucosidases in terms of digestibility, changes in morphology, crystallinity, and thermal properties.

Interactions of hsian-tsao polysaccharide with corn starch to reduce its in vitro digestibility.

Hsian-tsao polysaccharide (HP) with preferable bioactivities was used to produce starchy gel foods. This study elucidated how interactions of HP (0-0.6 %, w/v) with gelatinized corn starch (CS, 6 %, w/v) reduced in vitro digestibility of CS. The CS digestibility (82.85 %, without HP) was reduced to 68.85 % (co-heated) and 74.75 % (non-co-heated) when 0.6 % HP was added, demonstrating that HP reduced the CS digestibility to a larger extent under co-heating by both HP-CS interactions and inhibiting digestive enzyme activities by HP which was dominated under non-co-heating. Moreover, when co-heated, HP bonded to the amylose of CS via physical forces with a composite index of 21.95 % (0.4 % HP), impeded CS swelling and promoted CS aggregation with the average particle size increased to 42.95 µm (0.6 % HP). Also, the HP-CS complexes formed strong association network structures that increased their apparent viscosity and digestive fluid viscosity. Additionally, HP enhanced the short-range ordered structure and crystal structure of CS. These results evidenced that HP-CS interactions significantly reduced the CS digestibility by forming physical barriers, viscosity effects, and ordered structures, to hinder the enzymes from accessing starch matrices. This laid a foundation for applying HP to starchy foods with a low predicted glycemic index.

Simultaneous Determination of Enantiomeric Purity and Organic Impurities of Dexketoprofen Using Reversed-Phase Liquid Chromatography-Enhancing Enantioselectivity through Hysteretic Behavior and Temperature-Dependent Enantiomer Elution Order Reversal on Polysaccharide Chiral Stationary Phases.

A reversed-phase high-performance liquid chromatographic (HPLC) method was developed for the simultaneous determination of the potential impurities of dexketoprofen, including the distomer R-ketoprofen. After screening the separation capability of four polysaccharide columns (Lux Amylose-1, Lux Amylose-2, Lux Cellulose-1 and Lux Cellulose-2) in polar organic and in reversed-phase modes, appropriate enantioseparation was observed only on the Lux Amylose-2 column in an acidified acetonitrile/water mixture. A detailed investigation of the mobile phase composition and temperature for enantio- and chemoselectivity showed many unexpected observations. It was observed that both the resolution and the enantiomer elution order can be fine-tuned by varying the temperature and mobile phase composition. Moreover, hysteresis of the retention times and enantioselectivity was also observed in reversed-phase mode using methanol/water mixtures on amylose-type columns. This could indicate that the three-dimensional structure of the amylose column can change by transitioning from a polar organic to a reversed-phase mode, which affects the enantioseparation process. Temperature-dependent enantiomer elution order and rare enthalpic/entropic controlled enantioseparation in the operative temperature range were also observed in reversed-phase mode. To find the best methodological conditions for the determination of dexketoprofen impurities, a full factorial optimization design was performed. Using the optimized parameters (Lux Amylose-2 column with water/acetonitrile/acetic acid 50/50/0.1 (v/v/v) at a 1 mL/min flow rate at 20 °C), baseline separations were achieved between all compounds within 15 min. Our newly developed HPLC method was validated according to the current guidelines, and its application was tested on commercially available pharmaceutical formulations. According to the authors' knowledge, this is the first study to report hysteretic behavior on polysaccharide columns in reversed-phase mode.

Enantiomeric separation of thiourea derivatives of naringenin on amylose and cellulose polymeric chromatographic chiral columns.

Due to a great demand for amylose and cellulose polymeric chromatographic chiral columns, the enantiomeric separation of thiourea derivatives of naringenin was achieved on the different amylose (Chiralpak-IB) and cellulose chiral (Chiralcel-OJ and Chiralcel-OD-3R) columns with varied chromatographic conditions. The isocratic mobile phases used were ethanol and methanol, where ethanol/hexane and methanol/hexane were used as gradient mode and were prepared in volume/volume relation. The separation and resolution factors for all the enantiomers were in the range of 1.25 to 3.47 and 0.48 to 1.75, respectively. The enantiomeric resolution was obtained within 12 min making fast separation. The docking studies confirmed the chiral recognition mechanisms with binding affinities in the range of -4.7 to -5.7 kcal/mol. The reported compounds have good anticoagulant activities and may be used as anticoagulants in the future. Besides, chiral separation is fast and is useful for enantiomeric separation in any laboratory in the world.

Enhancing functional properties of rice starches through hydroxypropylation for development of reduced-fat white sauces.

Present study investigated the preparation of commonly used white sauce with 50 % less added fat by using 10 % hydroypropylated Irri and Basmati rice starches in the formulation. The sauces incorporated with hydroxypropylated starches exhibited significantly lower gelatinization temperature and time, while the change in maximum viscosity was insignificant. Significantly improved stability at ambient, refrigeration, and freezing temperatures of reduced-fat white sauces was observed whereas change in the taste was insignificant. Basmati hydroxypropylated starch containing white sauce significantly mimicked the sensory properties of full-fat sauces. The hydroxypropyl groups were found to be 1.06 % and 1.16 % for Basmati and Irri hydroxypropylated starches, respectively. These values fall below the specified limit set by the Food and Drug Administration for the food grade hydroxypropylated starches. Significant improvements in peak viscosity, swelling power, solubility, percent transmittance, and water retention capacity were observed after the chemical modification of both rice varieties.

Population Structure and Genetic Diversity of Shanlan Landrace Rice for GWAS of Cooking and Eating Quality Traits.

The Shanlan landrace rice in Hainan Province, China, is a unique upland rice germplasm that holds significant value as a genetic resource for rice breeding. However, its genetic diversity and its usefulness in rice breeding have not been fully explored. In this study, a total of eighty-four Shanlan rice, three typical japonica rice cultivars, and three typical indica rice cultivars were subjected to resequencing of their genomes. As a result, 11.2 million high-quality single nucleotide polymorphisms (SNPs) and 1.6 million insertion/deletions (InDels) were detected. Population structure analysis showed all the rice accessions could be divided into three main groups, i.e., Geng/japonica 1 (GJ1), GJ2, and Xian/indica (XI). However, the GJ1 group only had seven accessions including three typical japonica cultivars, indicating that most Shanlan landrace rice are different from the modern japonica rice. Principal component analysis (PCA) showed that the first three principal components explained 60.7% of the genetic variation. Wide genetic diversity in starch physicochemical parameters, such as apparent amylose content (AAC), pasting viscosity, texture properties, thermal properties, and retrogradation representing the cooking and eating quality was also revealed among all accessions. The genome-wide association study (GWAS) for these traits was conducted and identified 32 marker trait associations in the entire population. Notably, the well-known gene Waxy (Wx) was identified for AAC, breakdown viscosity, and gumminess of the gel texture, and SSIIa was identified for percentage of retrogradation and peak gelatinization temperature. Upon further analysis of nucleotide diversity in Wx, six different alleles, wx, Wxa, Wxb, Wxin, Wxla/mw, and Wxlv in Shanlan landrace rice were identified, indicating rich gene resources in Shanlan rice for quality rice breeding. These findings are expected to contribute to the development of new rice with premium quality.

Dynamics of starch formation and gene expression during grain filling and its possible influence on grain quality.

In rice, grain filling is a crucial stage where asynchronous filling of the pollinated spikelet's of the panicle occurs. It can influence both grain quality and yield. In rice grain, starch is the dominant component and contains amylose and amylopectin. Amylose content is the chief cooking quality parameter, however, rice varieties having similar amylose content varied in other parameters. Hence, in this study, a set of varieties varying in yield (04) and another set (12) of varieties that are similar in amylose content with variation in gel consistency and alkali spreading value were used. Panicles were collected at various intervals and analysed for individual grain weight and quantities of amylose and amylopectin. Gas exchange parameters were measured in varieties varying in yield. Upper branches of the panicles were collected from rice varieties having similar amylose content and were subjected to gene expression analysis with fourteen gene specific primers of starch synthesis. Results indicate that grain filling was initiated simultaneously in multiple branches. Amylose and amylopectin quantities increased with the increase in individual grain weight. However, the pattern of regression lines of amylose and amylopectin percentages with increase in individual grain weight varied among the varieties. Gas exchange parameters like photosynthetic rate, stomatal conductance, intercellular CO2 and transpiration rate decreased with the increase in grain filling period in both good and poor yielding varieties. However, they decreased more in poor yielders. Expression of fourteen genes varied among the varieties and absence of SBE2b can be responsible for medium or soft gel consistency.

Effect of dry heat and its combination with vacuum heat on physicochemical, rheological and release characteristics of Alocasia macrorrhizos retrograded starches.

Retrograded starches have received increasing attention due to their potential excipient properties in pharmaceutical formulations. However, to evade its application-oriented challenges, modification of retrograded starch is required. The study emphasizes influence of dry heating and the dual heat treatment by dry heating amalgamation with the vacuum heat treatment on quality parameters of retrograded starch. The starch was isolated by using two different extraction media (0.05 % w/v NaOH and 0.03 % citric acid) from Alocasia macrorrhizos and then retrograded separately. Further, retrograded starches were first modified by dry heating and afterwards modified with combination of dry and vacuum heating. Modification decreased moisture, ash content and increased solubility. Modified Samples from NaOH media had higher water holding capacity and amylose content. X-ray diffraction revealed type A and B crystals with increasing crystallinity of retrograded heat-modified samples from NaOH media. Thermogravimetric analysis, differential scanning calorimetry confirmed thermal stability. Shear tests showed shear-thinning behavior whereas dominant storage modulus (G/) over loss modulus (G//), depicting gel-like behavior. Storage, loss, and complex viscosity initially increased, then decreased with temperature. In-vitro release reflects, modified retrograded starches offers versatile drug release profiles, from controlled to rapid. Tailoring starch properties enables precise drug delivery, enhancing pharmaceutical formulation flexibility and efficacy.

Experimental and Molecular Docking Studies on Enzyme-Driven Biohybrid-Inspired Micromotors Based on Amylose-b-(PEG-co-PBA) Inclusion Complexes.

Amylose is a linear polysaccharide with a unique ability to form helical inclusion complexes with the appropriate guest components. Numerous studies have been conducted on encapsulation of bioactive compounds for various applications. In the biomedical field, biohybrid micro/nanomotors (MNMs) have emerged as innovative candidates due to their excellent biocompatible and biodegradable properties. This study was inspired by the biohybrid- and enzymatic-propelled MNMs and explored the potential of amylose inclusion complexes (ICs) in creating these MNMs. The study developed a new type of micromotor made from (PEG-co-PBA)-b-amylose. Nanoprecipitation, dimethyl sulfoxide (DMSO), and ultrasound-treated methods were employed to create spherical, thick crystalline, and rod-bacterial-like morphologies, respectively. Candida antarctica lipase B (CALB) was used as the catalytic fuel to induce the motion by the enzymatic degradation of ester linkages in the polymeric segment. Optical microscopy was utilized to observe the motion of the motors following incubation with enzyme concentrations of 5, 10, and 20% (w/w). The results demonstrated that the velocity of the motors increased proportionally with the percentage of added enzyme. Additionally, a comprehensive molecular docking evaluation with PyRx software provided insight into the interaction of the CALB enzyme with polymeric moieties and demonstrated a good affinity between the enzyme and polymer in the binding site. This study provides novel insight into the design and development of enzymatically driven polymeric micromotors and nanomotors.

Investigation of the role of sodium chloride on wheat starch multi-structure, physicochemical and digestibility properties during X-ray irradiation.

In this paper, different NaCl content was added to wheat starch and then subjected to X-ray irradiation to investigate the effect of salt on starch modification by irradiation. The results showed that the degradation of wheat starch intensified with the increase in irradiation dose. When irradiated at the same dose, wheat starch with sodium chloride produced shorter chains, lower molecular weight and amylose content, and higher crystallinity, solubility, and resistant starch than wheat starch without sodium chloride. The energy generated by X-rays dissociating sodium chloride caused damage to the glycoside bonds of the starch molecule. With a further increase in the mass fraction of NaCl, the hydrogen bonds of the starch molecules were broken, and the double helix structure was depolymerized, which exacerbated the extent of irradiation-modified wheat starch. At the same time, starch molecules will be rearranged to form a more stable structure.

Enantiomeric analysis of γ(δ)-lactones by reversed phase high performance liquid chromatography using amylose tris(5-chloro-2-methylphenylcarbamate) as stationary phase.

A Chiralpak AY-3R column was investigated for analytical enantiomeric separation of twelve racemic γ(δ)-lactones using reversed phase high performance liquid chromatography. Main influence factors, including organic modifier, flow rate and column temperature, were optimized. Five kinds of γ(δ)-lactones were successfully enantioseparated using the established method: γ-nonanolactone, δ-decalactone, δ-undecalactone, δ-dodecalactone and δ-tetradecalactone. Under optimized conditions, enantiomeric peak resolution (Rs) for the five γ(δ)-lactones reached more than 1.09, 1.08, 1.54, 1.43, and 1.11, respectively. Their chromatographic elution behavior was investigated using Van't Hoff equation and Van Deemter equation. It was found that an exothermic process occurred during enantiomeric separation of γ(δ)-lactones using this chromatographic column, and it showed a typical Van Deemter curve. Finally, this method was applied in enantiomeric ratio analysis of γ(δ)-lactones contents for purchased butter samples, and results confirmed the predominant content of the (R)-configuration of δ-dodecalactone in natural animal butter, while in margarine, an equal proportion of (R/S)-configuration of δ-dodecalactone was detected.

Effects of Kiwifruit Dietary Fibers on Pasting Properties and In Vitro Starch Digestibility of Wheat Starch.

In this study, the roles of kiwifruit soluble/insoluble dietary fiber (SDF/IDF, respectively) in the pasting characteristics and in vitro digestibility of wheat starch were explored. According to RVA and rheological tests, the IDF enhanced the wheat starch viscosity, decreased the gelatinization degree of the starch granules, and exacerbated starch retrogradation. The addition of SDF in high quantities could reduce the starch gelatinization level, lower the system viscosity, and exacerbate starch retrogradation. Through determining the leached amylose content and conducing scanning electron microscopy, the IDF and SDF added in high quantities was combined with the leached amylose wrapped around the starch granules, which reduced the leached amylose content and decreased the gelatinization degree of the starch granules. The Fourier transform infrared results showed that the addition of both the IDF and SDF resulted in an enhancement in hydrogen bonding formed by the hydroxyl groups of the system. The in vitro digestion results strongly suggested that both the IDF and SDF reduced the wheat starch digestibility. The above findings are instructive for the application of both IDF and SDF in starchy functional foods.

Unravelling carbohydrate binding module 21 (CBM21) dynamics of interaction with amylose.

The carbohydrate binding module 21 (CBM21) from Rhizopus oryzae is a dual-site CBM proposed to disrupt polysaccharide structures. Additionally, it serves as a purification tag in industry. CBM21 crystal structure features a Glc residue in an unusual 1S3 conformation, whose relevance for the CBM mechanism of action is unclear. In this context, we seek to contribute for the understanding of CBM21 mechanism of action by: i) investigating the role of the 1S3 conformation on carbohydrate recognition, and ii) characterize the protein-carbohydrate binding dynamics using molecular dynamics and metadynamics simulations at MM and QM/MM levels. Results indicate the 1S3 Glc conformation is unlikely to occur under biological conditions, being originated from the crystallographic environment. CBM21 binding to small ligands appears transient and unstable, while protein dimerization and polysaccharide chain size influence complex stability. In interactions with amylose, CBM21 exhibits a repeated unbinding followed by re-binding, while simultaneously alternating between binding sites I and II. These results suggest that CBM21 acts through transient interactions, directing carbohydrates to the catalytic center rather than forming strong and long-lasting bonds with carbohydrates. Accordingly, we expect such atomistic depiction of CBM21 mechanism could aid in CBM design targeting biotechnological applications.

The important role of starch fine molecular structures in starch gelatinization property with addition of sugars/sugar alcohols.

The relationship between the fine structure of starch and its gelatinization properties is not well studied, particularly in relation to the influence of sugar or sugar alcohol. In this study, seven starches with distinct molecular structures were investigated to determine how different sugars and sugar alcohols affect their gelatinization properties. The inclusion of sugars and sugar alcohols resulted in a significant elevation of starch gelatinization temperatures (∼ 8 °C), especially with sucrose, isomaltose and isomalt. Nevertheless, the influence of these sugars/ sugar alcohols on the gelatinization temperature range and enthalpy change varied depending on the particular starch varieties. According to the correlation analysis, sugars and sugar alcohols mainly exert their impact on the starch gelatinization temperature range and enthalpy change by possibly interacting with amylose chains possessing a degree of polymerization ranging from 100 to 1000 (p < 0.05) and inhibiting the amylose leaching during gelatinization. These findings help a better understanding of the complex relationship between starch fine structure and gelatinization properties under the influence of sugars and sugar alcohols.

Structure and functional characteristics of starch from different hulled oats cultivated in China.

This work aimed to evaluate the structure and functional characteristics of starch from ten hulled oat cultivars grown in different locations in China. The protein, phosphorus, amylose, and starch contents were 0.2-0.4 %, 475.7-691.8 ppm, 16.2-23.0 %, and 93.6-96.7 %, respectively. All the starches showed irregular polygonal shapes and A-type crystallization with molecular weights ranging from 7.2 × 107 to 4.5 × 108 g/mol. The amounts of amylopectin A (DP 6-12), B1 (DP 13-24), B2 (DP 25-36), and B3 (DP > 36) chains were in the ranges of 10.3-16.0 %, 54.5-64.8 %, 16.5-21.1 %, and 4.9-13.1 %, respectively. The starches differed significantly in gelatinization temperatures, pasting viscosity, solubility, swelling power, rheological properties, and digestion parameters. The results revealed that the larger particle size could increase the peak viscosity of the starch paste. The presence of phosphorus increased the gelatinization temperature and enhanced the resistant starch content. The starch granules with higher crystallinity contained a higher proportion of phosphate, which increased final viscosity and setback viscosity but decreased rapidly digestible starch. Overall, oat starch with a high phosphorus content could be used to prepare low-glycemic-index food for diabetes patients.

The multi-scale structure changes of γ-ray irradiated potato starch to mitigate pasting/digestion properties.

The comprehensive understanding of multi-scale structure of starch and how the structure regulates the pasting/digestion properties remain unclear. This work investigated the effects of γ-ray irradiation with different doses on multi-scale structure and pasting/digestion properties of potato starch. Results indicated that γ-ray at lower doses (<20 kGy) had little effect on micromorphology of starch, increased mainly the amylose content and the thickness of amorphous region while decreased crystallinity, double helix content and lamellar ordering. With the increase of dose, the internal structure of large granules was destroyed, resulting in the depolymerization of starch to form more short-chains and to reduce molecular weight. Meanwhile, amylose content decreased due to the depolymerization of amylose. The enhanced double helix content, crystallinity, lamellar ordering and structural compactness manifested the formation of the thicker and denser starch structure. These structure changes resulted in the decreased viscosity, the increased stability and anti- digestibility of paste.