At-home bleaching with carbamide peroxide with concentrations below 10%: bleaching efficacy and permeability in the pulp chamber.

OBJECTIVES: To evaluate the bleaching efficacy and permeability of hydrogen peroxide (HP) in the pulp chamber of human teeth bleached with lower concentrations of carbamide peroxide gel (4%, 5% and 7% CP). MATERIALS AND METHODS: Bleaching gels with lower concentrations were formulated and a commercial standard gel, 10% CP, was used as a reference. Fifty-six human premolars were randomly divided into four groups. Applications of the bleaching gel were made for 3 h for 21 days. The bleaching efficacy was evaluated by digital spectrophotometry on 1, 7, 14 and 21 days, with analysis in the ∆Eab, ∆E00 and WID color spaces. The concentration of HP in the pulp chamber was measured in the same periods by UV-Vis spectrophotometry (µg/mL). Two-way repeated analysis of variance (ANOVA) examined bleaching efficacy and HP permeability, followed by Tukey's post-hoc test (α = 0.05). RESULTS: All groups showed significant color changes, with no statistical differences after the second and third week of bleaching (p > 0.05). The 'time' factor was statistically different (p < 0.05), increasing the bleaching efficacy throughout the treatment. The 4% CP group had lower HP levels in the pulp chamber (p < 0.05). CONCLUSIONS: The results seem promising, revealing that low concentration gels are as effective as 10% CP with the benefit of reducing the amount of HP in the pulp chamber. CLINICAL RELEVANCE: Low concentration 4% PC and 5% PC maintains bleaching efficacy, reduces the penetration of HP peroxide into the pulp chamber, and may reduce tooth sensitivity.

Assessment of color changes and adverse effects of over-the-counter bleaching protocols: a systematic review and network meta-analysis.

OBJECTIVES: To assess color change efficacy and the adverse effects of varied over-the-counter (OTC) bleaching protocols. METHODOLOGY: The study included randomized clinical trials evaluating color changes from OTC bleaching agents. Nine databases were searched, including the partial capture of the grey literature. The RoB2 tool analyzed the individual risk of bias in the studies. Frequentist network meta-analyses compared treatments through common comparators (∆Eab* and ∆SGU color changes, and tooth sensitivity), integrating direct and indirect estimates and using the mean and risk differences as effect measures with respective 95% confidence intervals. The GRADE approach assessed the certainty of the evidence. RESULTS: Overall, 37 remaining studies constituted the qualitative analysis, and ten composed the meta-analyses. The total sample included 1,932 individuals. ∆Eab* was significantly higher in groups 6% hydrogen peroxide (HP) strips (≥ 14 h). ∆SGU was significantly higher in groups at-home 10% carbamide peroxide (CP) (≥ 14 h), followed by 6% HP strips (≥ 14 h) and 3% HP strips (≥ 14 h). At-home 10% CP (7-13 h) and placebo showed lower risks of tooth sensitivity without significant differences between these treatments. CONCLUSION: Considering the low level of evidence, OTC products presented satisfactory short-term effects on tooth bleaching compared to the placebo, with little to no impact on dentin hypersensitivity and gingival irritation. CLINICAL RELEVANCE: OTC products are proving to be practical alternatives for tooth whitening. However, patients should be advised about the possible risks of carrying out such procedures without professional supervision.

Effect of carbamide peroxide on biomechanical properties of vacuum-formed retainers: A split-mouth randomized controlled trial.

OBJECTIVE: To investigate the effect of tooth whitening on biomechanical properties of vacuum-formed retainers (VFRs). METHODS: Using a split-mouth, randomised controlled trial design, thirty participants were randomly allocated to receive whitening on either the upper or the lower arch, using 10 % carbamide peroxide for two weeks. Biomechanical properties such as hardness, tensile strength, and surface roughness were assessed two weeks after whitening was completed. RESULTS: Tensile strength of the whitening arch (mean ± SD: 40.93 ± 3.96 MPa) was significantly lower than that of the control (47.40 ± 5.03 MPa) (difference 6.47 MPa, 95 % CI 4.51 - 8.42, p < 0.001). Hardness and internal roughness of the whitening arch (VHN = 14.63 ± 2.29 N/mm2 and Ra = 1.33 ± 0.35 µm, respectively) were significantly greater than those of the control (12.22 ± 1.86 N/mm2 and 0.96 ± 0.29 µm, respectively) (differences 2.41 N/mm2, 95 % CI 1.56 - 3.25, p < 0.001 and 0.37 µm, 95 % CI 0.23 - 0.51, p < 0.001, respectively). The whitening arch showed greater tooth colour change (ΔE = 6.00 ± 3.32) than the control (ΔE = 2.50 ± 1.70) (difference = 3.50, 95 % CI 2.43 - 4.56, p < 0.001). CONCLUSIONS: Based on this short-term study, marked tooth colour change was achieved by whitening with VFRs as the whitening trays, but this changed the VFRs' biomechanical properties, including a decrease in tensile strength and an increase in hardness and internal roughness. CLINICAL SIGNIFICANCE: The application of carbamide peroxide in VFRs may compromise their mechanical properties.

Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial.

OBJECTIVE: This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste. METHODS: Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE00) and subjective (ΔSGU) color and whiteness index (ΔWID) changes were calculated. Patients self-reported the risk and intensity of TS using a visual analogue scale and the volunteer's satisfaction was determined by a questionnaire. Color assessments were analyzed by Kruskal-Wallis followed by Dwas-Steel-Crithlow-Fligner, and absolute TS risk and volunteer's satisfaction by Fisher exact test (p < 0.05). RESULTS: ACPW and ACT promoted similar effects in ΔE00, ΔSGU, and ΔWID to that observed for RT. No significant difference was found in terms of TS risk intensity. TS risk became high after 7 and 14 days, with higher TS prevalence in CP. Volunteers reported that ACPW exhibited the lowest ease-of-use, comfort, and whitening satisfaction among groups (p < 0.05). CONCLUSION: Activated charcoal-based products presented a minor and unsatisfactory whitening effect while CP resulted in optimal tooth whitening and the highest level of satisfaction among volunteers. Risk was higher from 7 days onwards and was more pronounced in the CP. CLINICAL RELEVANCE: Based on the whitening effect and patient satisfaction, this controlled-randomized clinical evidence supports that the use of activated charcoal-based products should be discouraged.

Evaluation of initial pH and urea hydrogen peroxide (UHP) co-pretreatment on waste-activated sludge.

Wastewater treatment and conversion into renewable energy sources have been of great interest in recent times due to growing environmental pollution concerns and need for sustainable energy sources. Sewage sludge treatment can convert sludge into renewable energy. In this study, the impact of initial pH and urea hydrogen peroxide (UHP) co-pretreatment on sludge hydrolysis and anaerobic digestion was investigated. The pH of sludge was initially adjusted to 7, 9, and 11 before the addition of 8 mmol/g VS UHP. Under 24 h pretreatment, alkaline medium and UHP effectively enhanced sludge solubilization and hydrolysis. The combination of chemical, sonication, and centrifugation improved the extraction of extracellular polymerase substances released in soluble state. Secondly, anaerobic digestion was performed for 11 days to determine the influence of a lower mesophilic temperature (20 °C) and retention time on the pretreated sludge. The highest NH4+-N concentration of 5.32 g/L was recorded in pH 7+UHP. The most significant total VFA concentration of 13.1 g COD/L was observed in pH 7+UHP on day 9. Acetic acid, isovaleric acid and propionic acid accounted for 80%-83% of the total VFA composition in all pretreated reactors. Lower mesophilic temperature efficiently optimized UHP and VFA production in the pretreated reactors. Microbial metabolism was stabilized under a longer retention time. Alkaline pH and longer retention time elevated NH4+-N and VFA concentration. The results showed that initial pH and UHP co-pretreatment of waste activated sludge offer an alternative pathway for enhancing sludge hydrolysis and VFA production applicable in sludge treatment.

EFFECTS OF PROFESSIONAL ORAL HYGIENE AND TEETH WHITENING ON THE MICROELEMENT COMPOSITION OF ENAMEL.

OBJECTIVE: Aim: The objective of this study is to investigate the impact of professional teeth cleaning and the substances used in modern dentistry for whitening on the microelement composition of tooth enamel. PATIENTS AND METHODS: Materials and Methods: To study the morphology and microelement composition of the enamel, scanning electron microscopy was performed using the MiraLM microscope equipped with a Schottky field emission electron gun from Tescan. RESULTS: Results: A comparative analysis between the areas subjected to mechanical cleaning and those where it was not applied revealed a significant difference in the research results, particularly in carbon, which changed from 25.16±1.04 to 32.02±1.8. An analysis of the enamel's chemical composition before and after whitening revealed a decrease in carbon from 45.91±1.20 to 42.46±1.74. The change in phosphorus content was determined to be from 9.77±0.39 to 9.56±0.75. A decrease in calcium from 15.96±0.64 to 15.21±1.22 and magnesium from 0.07±0.01 to 0.01±0.01 was also observed. CONCLUSION: Conclusions: Professional dental hygiene does not have a direct impact on the microelement composition of enamel, such as the levels of calcium, phosphorus, fluoride, and other microelements. However, it can have an indirect and temporary influence due to the use of abrasive materials that affect dental deposits, pellicle, and the surface layer of enamel. Teeth whitening can affect the microelement composition of enamel, but these changes are mostly temporary and associated with processes of demineralization/ remineralization and oxygenation.

Linking Carbendazim Accumulation with Soil and Endophytic Microbial Community Diversities, Compositions, Functions, and Assemblies: Effects of Urea-hydrogen Peroxide and Nitrification Inhibitors.

Fungicide carbendazim accumulation in soils and plants is a wide concern. Nitrogen (N) is a substantial nutrient limiting crop growth and affecting soil microbial activity and the community in degrading fungicides. We investigated the effects of urea-hydrogen peroxide (UHP) and nitrification inhibitors Dicyandiamide (DCD) and 3,4-dimethylpyrazole phosphate (DMPP) on carbendazim accumulation and soil and endophytic microbial communities. The UHP application had negligible influences on soil and plant carbendazim accumulation, but the combined UHP and DCD decreased soil carbendazim accumulation by 5.31% and the combined UHP and DMPP decreased plant carbendazim accumulation by 44.36%. The combined UHP and nitrification inhibitor significantly decreased the ratios of soil Firmicutes and endophytic Ascomycota. Soil microbial community assembly was governed by the stochastic process, while the stochastic and deterministic processes governed the endophyte. Our findings could provide considerable methods to reduce fungicide accumulation in soil-plant systems with agricultural N management strategies.

Development of an Efficient On-Tissue Epoxidation Reaction Mediated by Urea Hydrogen Peroxide for MALDI MS/MS Imaging of Lipid C═C Location Isomers.

Unsaturated lipids containing different numbers and locations of C═C bonds are significantly associated with a variety of cellular and metabolic functions. Although matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) has been used to visualize the spatial distribution patterns of various lipids in biological tissues, in situ identification, discrimination, and visualization of lipid C═C location isomers remain challenging. Herein, an efficient and fast on-tissue chemical derivatization (OTCD) approach was developed to pinpoint the locations of C═C bonds in complex lipids in situ via methyltrioxorhenium (MTO)-catalyzed epoxidation of C═C with a urea hydrogen peroxide (UHP)/hexafluoroisopropanol (HFIP) system. The efficiency of OTCD could reach 100% via one-step spray deposition of the solution mixture of MTO/UHP/HFIP at room temperature. The developed OTCD method provided rich structural information on lipid C═C location isomers, and their accurate spatial distribution patterns were resolved in mouse brain tissues. Tissue-specific distributions and changes of lipid C═C location isomers in the liver sections of obese ob/ob and diabetic db/db mice were further investigated, and their correlation in two animal models was revealed. The simplicity and high efficiency of the OTCD method developed for MALDI tandem MSI of lipid C═C location isomers possess great potential for functional spatial lipidomics.

Dental aesthetic perception of patients submitted to activated charcoal-based bleaching agents: A randomized clinical trial.

OBJECTIVE: To evaluate the effects of activated charcoal-based products used in two presentation forms (powder or toothpaste), compared to 10 % carbamide peroxide and conventional toothpaste on aesthetic perception and psychosocial impact before and after treatment. METHODS: Fifty-six participants were divided into 4 experimental groups (n = 14). Activated charcoal-based powder (PW); Activated charcoal-based dentifrice (AC); Conventional fluoride toothpaste (CD) and 10 % carbamide peroxide (CP). All products were used for 14 days. Psychosocial impact on dental esthetics (PIDAQ), oral health impact profile (OHIP- Esthetics) and orofacial esthetics scale (OES) questionnaires were applied before and after treatment. Descriptive and exploratory data analyses were performed and analyzed using linear mixed models for repeated measures over time considering significance level of α = 0.05. RESULTS: For PIDAQ, the CP group showed significant decrease in psychological impact, aesthetic perception domains and overall score, while in the PW group, there was only a significant decrease in the psychological impact domain. Decrease in OHIP was observed for the functional limitation domain scores for treatments with CP and PW, in the psychological discomfort domain, decrease was observed for all groups, while for the OES questionnaire, significant increase in the color domain was observed for the CP group. CONCLUSION: Activated charcoal-based products showed lower scores in all questionnaires when compared with carbamide peroxide; thus, charcoal-based products promoted lower impact on quality of life and aesthetic perception. CLINICAL RELEVANCE: In this randomized clinical trial, charcoal-based OTC products had inferior quality of life and aesthetic perception results compared to conventional carbamide peroxide bleaching.

Effect of Tooth Bleach on Dentin Fatigue Resistance in Situ.

BACKGROUND: Negative effects of bleaching on dentin have previously been reported in vitro. OBJECTIVE: The purpose of this study was to determine the effect of carbamide peroxide bleaching on dentin fatigue resistance using a clinically relevant in situ model. METHODS AND MATERIALS: Following research ethics board approval, 60 human teeth requiring extraction were collected. Sterilized human dentin specimens were cut (1.2x1.2x10 mm) and secured into customized bleaching trays to be used by study participants. Participants were randomly assigned to either bleach (10% carbamide peroxide, n=23) or control (gel without bleach, n=26) treatment groups. Treatment was applied to the bleaching trays and worn overnight by participants for 14 days. After treatment completion, dentin specimens were removed from the bleaching trays and subjected to fatigue testing (10 N, 3 mm/s, 2x105 cycles) while submerged in artificial saliva. Kaplan-Meier survival analysis was conducted to compare the number of cycles to failure during fatigue testing in both groups. A log rank test was run to determine if there were differences in the survival distribution between the two groups (α<0.05). RESULTS: The median number of cycles to failure was 352 ± 202 and 760 ± 644 for the bleach and control groups, respectively. The survival distributions for the two groups were significantly different (p=0.020). Dentin fatigue resistance was significantly lower in the bleach group compared to the control. CONCLUSIONS: Direct bleaching of human dentin using an at-home tray bleaching protocol in situ reduced dentin fatigue resistance. This has implications for tooth fracture risk and longevity.

In vitro bleaching efficacy of violet LED associated with 10% hydrogen peroxide and 10% carbamide peroxide.

BACKGROUND: This in vitro study evaluated the efficacy and the effect over the dental enamel surface of violet LED dental bleaching associated to different concentrations of carbamide and hydrogen peroxide. METHODS: Human dental blocks (n = 100) were randomly distributed into 5 groups: 10% hydrogen peroxide (HP10), 10% carbamide peroxide (CP10), 10% hydrogen peroxide with violet LED (VHP10), 10% carbamide peroxide with violet LED (VCP10) and 35% hydrogen peroxide (HP35). The specimens were analyzed by Vickers microhardness test (n = 50) initially, immediately after and seven days after ending the bleaching protocol. For color analysis (n = 50), the specimens were evaluated for bleaching effectiveness (ΔE2000, ΔE1976) and whiteness index (ΔWID) with EasyShade spectrophotometer, before bleaching protocol and seven days after ending the bleaching protocol. The microhardness and color data were analyzed using one-way ANOVA with post-hoc Tukey test (α = 0.05). RESULTS: The microhardness values showed difference among the investigated groups only immediately after the end of the dental bleaching (p < 0.05), with reduction for the groups HP35 (p < 0.01) and HP10 (p < 0.05), however the microhardness values were reestablished after seven days. Regarding the color changes, a difference between VHP10 and the others groups evaluated for ΔE2000 and ΔE1976 index was observed (p < 0.05). For ΔWID, there was no difference between the studied groups. CONCLUSIONS: Violet LED associated with low concentration bleaching agents did not show a negative effect on dental enamel regarding the surface microhardness. All bleaching protocols were effective, therefore, perceptible to human eyes.

Effectiveness of changing the color of darker teeth is potentiated by association with violet LED light.

BACKGROUND: The effectiveness of in-office bleaching protocols performed with violet LED light either combined with a bleaching agent containing 37% carbamide peroxide, or not, was determined by comparing teeth with different degrees of darkening. METHODOLOGY: Eighty bovine incisors were separated into groups of "light" teeth (luminosity greater than or equal to B3) and "dark" teeth (less than or equal to A3.5) to receive the protocols: HP - 35% hydrogen peroxide (Whiteness HP), CP - 37% carbamide peroxide (Whiteness SuperEndo), LED - violet LED light (Bright Max Whitening), CPLED - CP associated with the LED. For color analysis the CIEL*a*b* e WID, ΔEab, ΔE00 e ΔWID parameters were used. Data were analyzed using Mann-Whitney, Kruskal-Wallis, Dunn, Friedman or Nemenyi tests (α = 5%). RESULTS: HP and CP resulted in similar color change values (ΔEab, ΔE00 e ΔWID) for light and dark teeth (p > 0.05). Dark teeth showed better bleaching effectiveness (ΔEab, ΔE00 e ΔWID) than light teeth when CPLED was used (p < 0.05). LED showed color change that were below the limits of acceptability and perceptibility for ΔWID. CONCLUSION: light teeth are effectively bleached with the use of HP or CP, whereas dark teeth respond better to treatment with the CPLED protocol. Violet LED used alone did not show a satisfactory result.

Hybrid light applied with 37% carbamide peroxide bleaching agent with or without titanium dioxide potentializes color change effectiveness.

BACKGROUND: The effectiveness of dental color change was assessed by incorporating titanium dioxide (TiO2) into 37% carbamide peroxide bleaching agent associated with hybrid light. METHODOLOGY: Fifty bovine incisors were selected to receive the bleaching treatment, and separated into five groups (n = 10): 35% hydrogen peroxide (HP) (Whiteness HP, FGM/HP); 37% carbamide peroxide (CP) (Whiteness SuperEndo, FGM/CP); CP + hybrid light (HL) (CP HL); CP + 1% TiO2 (CP TiO2); CP TiO2 + hybrid light (CP TiO2 HL). The bleaching gels were applied to the dental surface for 30 min. Hybrid light (Whitening Plus, DMC/infrared laser diodes + blue LEDs +violet LEDs) was applied with 1 min of active light, alternating with 1 min of pause. A spectrophotometer (VITA Easyshade® Advance, Vita) was used to determine the color of the dental elements at baseline and time points after the 1st, 2nd and 3rd bleaching sessions. Color change effectiveness was evaluated using Vita Classical, CIEL*a*b*, WID and ΔEab, ΔE00 and ΔWID parameters. RESULTS: Generalized mixed linear models for repeated measures (α = 5%) showed significant decrease in Vita Classical scores and a* and b* values, as well as an increase in L* and ∆WID values for all the groups. Higher color change values for ΔEab were observed for CP HL and CP TiO2 HL, while those of ΔE00 and ΔWID were higher for CP TiO2 HL at the end of the bleaching treatment. CONCLUSION: Hybrid light applied with TiO2 incorporated into CP potentiated the effectiveness of the color change in the tooth structure.

Enhancing acidogenic fermentation of waste activated sludge via urea hydrogen peroxide pretreatment: Performance and mechanisms.

Improving the anaerobic treatment performance of waste activated sludge (WAS) to achieve resource recovery is an indispensable requirement to reduce carbon emissions, minimize and stabilize biosolids. In this study, a novel strategy by using urea hydrogen peroxide (UHP) to enhance SCFAs production through accelerating WAS disintegration, degrading recalcitrant substances and alleviating competitive suppression of methanogens. The SCFAs production and acetate proportion rose from 436.9 mg COD/L and 31.3% to 3102.6 mg COD/L and 54.1%, respectively, when UHP grew from 0 to 80 mg/g TSS. Mechanism investigation revealed that OH, O2 and urea were the major contributors to accelerate WAS disintegration with the sequence of OH> O2 > urea. Function microbes related to acidification and genes associated with acetate production ([EC:2.3.1.8] and [EC:2.7.2.1]) were upregulated while genes encoding propionic acid production ([EC:6.4.1.3] and [EC:6.2.1.1]) were downregulated. These results raised the application prospects of UHP in WAS resource utilization.

Effects of Dental Bleaching Agents on the Surface Roughness of Dental Restoration Materials.

Background and Objectives: This study aimed to evaluate the surface roughness evolution of several finished and polished composites when bleaching materials are applied. The research was conducted on four microhybrid or nanofilled composites that are used in dental restorations. Materials and Methods: For each composite type, 5 samples were selected for control, 5 samples were subjected to the bleaching protocol "office bleach" with 40% hydrogen peroxide, and 5 other samples were subjected to the "home bleach" protocol with 16% carbamide peroxide, resulting in a total number of 60 samples. The surfaces of all the samples were tested for roughness, and the values of the most relevant parameter (Ra), were collected. Comparisons between composites and samples were performed using one-way ANOVA (in Statistical Package for Social Sciences). Results: After the bleaching protocol with 40% hydrogen peroxide gel, it was found that the roughness of the group increased considerably compared to the control group, so the highest roughness was found at GC Gradia direct anterior group, and the lowest value was registered for the 3M ESPE Valux Plus group. Following the bleaching protocol with 16% carbamide peroxide (home bleach), it was noted that the sample surfaces were not as affected. In this case, the lowest roughness was found at 3M ESPE Valux Plus group, and the highest roughness was registered for the GC G-aenial anterior group. Following the interpretation of the results, all four types of dental composites tested showed significant surface roughness differences between the groups subjected to bleaching protocols and those kept as control (p < 0.05). Conclusions: The surfaces of the samples were affected by the bleaching protocols by increasing the roughness compared to the control samples.

Comparative Clinical Study of Two Tooth Whitening Protocols.

This study aimed to clinically evaluate the effectiveness of two different at-home whitening protocols and to determine which is more effective: applying the whitening gel (16% carbamide peroxide) every 24 hours (Group A) or every 48 hours (Group B) for 2 weeks. Group C received a placebo gel (glycerin) without peroxide, which was applied every 24 hours for 2 weeks. The differences in terms of tooth sensitivity were also analyzed. A sample of 60 patients was divided into three groups of 20 patients. To compare the groups, color measurements were made using a spectrophotometer, and Student t test was used for independent samples. The confidence level was set at 95% (P ≤ .05). No statistically significant differences were found between Groups A and B (P > .05). The study concluded that 16% carbamide peroxide was equally effective when applied with either protocol and obtained the same results, but the 48-hour application protocol produced less sensitivity than the 24-hour application protocol.

Effect of Simulated Annual At-home Bleaching on Susceptibility to Staining, Translucency, and Whiteness Variations of Computer-aided Design and Computer-aided Manufacturing Monolithic Materials.

The effect of annual at-home bleaching on the color, translucency, and whiteness properties of computer-aided design and computer-aided manufacturing (CAD-CAM) monolithic materials requires investigation. The aim of the present in vitro study was to evaluate the effect of simulated annual at-home bleaching (consisting of daily applications for 10 hours a day for 14 days), for up to 3 years, on susceptibility to staining (ΔE00), translucency (ΔTP00), and whiteness (ΔWID) variations and on topography of CAD-CAM monolithic materials. Disks from the Lava Ultimate (LU), Vita Enamic (VE), IPS Empress CAD (EMP), and IPS e.max CAD (EMAX) were allocated as follows: 1) nonbleached or 2) bleached with 10% carbamide peroxide. After reading the CIE L*a*b* coordinates at baseline (R0), specimens were bleached or not and subsequently immersed for a 1-year simulated period in coffee before the next reading (R1). This process was repeated two more times, resulting in R2 and R3. The ΔE00, ΔTP00, and ΔWID between R1, R2, and R3 in relation to R0 were calculated. The surface topography was analyzed by scanning electron microscopy. In general, bleaching increased the staining susceptibility of all materials when compared to the nonbleached groups and that of the LU, VE, and EMAX over the years. Bleaching decreased the translucency of the VE in all years and over the years. When compared to the nonbleached groups, bleaching decreased the whiteness of the LU and EMAX and increased the whiteness of the EMP, while the VE was not affected. In the LU, the whiteness decreased over the years in both treatments, whereas the other materials were not affected with time. All materials showed progressive topographic changes over the years. The simulated annual at-home bleaching with 10% carbamide peroxide adversely affected the topography and the optical and/or colorimetric properties of the evaluated materials.

Effect of experimental bleaching gels with polymers Natrosol and Aristoflex on the enamel surface properties.

Natrosol and Aristoflex® AVC polymers are widely applied in the cosmetic industry and have recently been applied as a thickener option in the composition of dental bleaching gels, with the purpose to reduce the adverse effects on enamel mineral components. The aim of this study was to evaluate the color variation (ΔE* ab, ΔE00, ∆WID), surface roughness (Ra), and mineral content quantification (Raman Spectroscopy) of dental enamel after bleaching treatment with experimental gel-based on 10% carbamide peroxide (CP), containing Carbopol, Natrosol, and Aristoflex® AVC. Sixty bovine teeth were randomly divided into 6 groups (n=10): Negative Control (NC) - no treatment; Positive Control (PC) - Whiteness Perfect 10% - FGM; CP with Carbopol (CPc); CP with Natrosol (CPn); CP with Aristoflex® AVC (CPa); NCP - no thickener. Data were analyzed, and generalized linear models (∆WID -T0 x T1) were used for repeated measurements in time for Ra and with a study factor for ΔE* ab and ΔE00. For the evaluation of the mineral content, data were submitted to one-way ANOVA and Tukey tests. For enamel topographic surface analysis the Scanning Electron Microscope (SEM) was performed. A significance level of 5% was considered. ΔE* ab and ΔE00 were significantly higher for CPc, CPn, CPa, and NCP groups. (∆WID) showed a significantly lower mean than the other groups for NC in T1. After bleaching (4-hour daily application for 14 days), Ra was higher in the CPc, CPn, and PC groups. For CPa, Ra was not altered. No significant difference was found in the quantification of mineral content. CPa preserved the surface smoothness more effectively. Aristoflex® AVC is a viable option for application as a thickener in dental bleaching gels, presenting satisfactory performance, and maintaining the whitening efficacy of the gel, with the advantage of preserving the surface roughness of tooth enamel without significant loss of mineral content.

Continuous vs fractionated violet LED light protocols for dental bleaching: Evaluations of color change and temperature of the dental pulp and buccal surface.

BACKGROUND: Dental color change and the temperature of the pulp chamber and of the buccal surface were evaluated during bleaching with 37% carbamide peroxide (CP) with continuous vs fractionated violet LED light protocols. METHODOLOGY: Bovine incisors received in-office bleaching for 30 min using different light protocols (Bright Max Whitening, MMOptics). Teeth were separated into groups (n = 10): HP) 35% hydrogen peroxide (Whiteness HP, FGM)/no light; CP) 37% carbamide peroxide (Whiteness SuperEndo, FGM)/no light; CP10) CP+10 min of continuous light; CP20) CP+20 min of continuous light; CP30) CP+30 min of continuous light; CPF) CP+20 cycles of 60 s light / 30 s no light (fractionated). Color evaluations were performed at different times. Evaluations of pulp and buccal surface temperatures were performed before and throughout the 30 min of bleaching. RESULTS: Generalized linear models for repeated measures over time were applied to the data (α=5%). After the 1st session, CP20 and CP30 had significantly lower b* values ​​than CP and CP10 (p = 0.0071). For ΔEab and ΔE00, CPF, CP20 and CP30 showed the highest color change among the treatments after the third bleaching (p<0.05). For temperature evaluations, CP30 showed higher pulp and buccal surface temperatures than the other protocols (p<0.0001) after 20 min. CONCLUSION: Fractionated or continuous application of violet LED for 20 or 30 min leads to greater effectiveness of color change. All protocols with the application of LED led to an increase in pulp and buccal surface temperatures during bleaching, although the fractionated application appeared to be safer than the use of continuous light.

The Efficacy of At-home, In-office, and Combined Bleaching Regimens: A Randomized Controlled Clinical Trial.

OBJECTIVE: The aim of this study was to compare the clinical efficacy of at-home, in-office, and combined bleaching regimens. METHODS: Forty-eight participants were recruited and randomly divided into four groups based on the bleaching regimen (n=12) as follows: 1) at-home bleaching using 10% carbamide peroxide (Opalescence PF 10%, Ultradent) for 14 days (HB); 2) two sessions of in-office bleaching using 40% hydrogen peroxide (Opalescence BOOST PF 40%, Ultradent) with a one-week interval (OB); 3) one session of in-office bleaching followed by at-home bleaching for seven days (OHB); and 4) at-home bleaching for seven days followed by one session of in-office bleaching (HOB). Tooth color was measured using a spectrophotometer (Easyshade, Vita ZahnFabrik) at baseline (T0), day 8 (T1), day 15 (T2), and day 43 (T3, four weeks after the end of the bleaching treatment). The color data were calculated using the CIEDE2000 (ΔE00) and whiteness index for dentistry (WID) formulas. Tooth sensitivity (TS) was recorded using a visual analogue scale (VAS) for 16 days. Data were analyzed by one-way analysis of variance (ANOVA) and the Wilcoxon signed-rank test (α=0.05). RESULTS: All bleaching regimens resulted in a significant increase in WID values (all p<0.05), while no significant differences in WID and ΔWID values were found among the different groups at each time point (all p>0.05). Significant differences in ΔE00 values were observed between T1 and T3 for all groups (all p<0.05), while no significant differences in ΔE00 values were found among the different groups at any time point (all p>0.05). Significantly lower TS values were observed in the HB group than in the OB and HOB groups (p=0.006 and p=0.001, respectively). CONCLUSIONS: All bleaching regimens resulted in great color improvement, and different regimens led to similar color changes at any of the evaluation time points. The sequence of treatments applying in-office bleaching or at-home bleaching did not affect the bleaching efficacy. The in-office bleaching and combined bleaching regimens yielded a higher intensity of TS than did at-home bleaching.