Design and Synthesis of N-Doped Carbons as Efficient Metal-Free Catalysts in the Hydrogenation of 1-Chloro-4-Nitrobenzene.

Metal-free catalysts based on nitrogen-doped porous carbons were designed and synthesized from mixtures of melamine as nitrogen and carbon sources and calcium citrate as carbon source and porogen system. Considering the physicochemical and textural properties of the prepared carbons, a melamine/citrate ratio of 2:1 was selected to study the effect of the pyrolysis temperature. It was observed that a minimum pyrolysis temperature of 750 °C is required to obtain a carbonaceous structure. However, although there is a decrease in the nitrogen amount at higher pyrolysis temperatures, a gradual development of the porosity is produced from 750 °C to 850 °C. Above that temperature, a deterioration of the carbon porous structure is produced. All the prepared carbon materials, with no need for a further activation treatment, were active in the hydrogenation reaction of 1-chloro-4-nitrobenzene. A full degree of conversion was reached with the most active catalysts obtained from 2:1 melamine/citrate mixtures pyrolyzed at 850 °C and 900 °C, which exhibited a suitable compromise between the N-doping level and developed mesoporosity that facilitates the access of the reactants to the catalytic sites. What is more, all the materials showed 100% selectivity for the hydrogenation of the nitro group to form the corresponding chloro-aniline.

Efficient dispersive solid phase extraction of trace nitrophenol pollutants in water with triazine porous organic polymer modified nanofiber membrane.

Detecting trace endocrine disruptors in water is crucial for evaluating the water quality. In this work, a innovative modified polyacrylonitrile@cyanuric chloride-triphenylphosphine nanofiber membrane (PAN@CC-TPS) was prepared by in situ growing triazine porous organic polymers on the polyacrylonitrile (PAN) nanofibers, and used in the dispersive solid phase extraction (DSPE) to enrich trace nitrobenzene phenols (NPs) in water. The resluted PAN@CC-TPS nanofiber membrane consisted of numerous PAN nanofibers cover with CC-TPS solid spheres (∼2.50 µm) and owned abundant functional groups, excellent enrichment performance and good stability. In addition, the method based on PAN@CC-TPS displayed outstanding capacity in detecting the trace nitrobenzene phenols, with 0.50-1.00 µg/L of the quantification, 0.10-0.80 µg/L of the detection limit, 85.35-113.55 % of the recovery efficiency, and 98.08-103.02 of the enrichment factor, which was comparable to most materials. Meanwhile, when PAN@CC-TPS was adopted in the real water samples (sea water and river water), the high enrichment factors and recovery percentages strongly confirmed the feasibility of PAN@CC-TPS for enriching and detecting the trace NPs. Besides, the related mechanism of extracting NPs on PAN@CC-TPS mainly involved the synergistic effect of hydrogen bonding, π-π stacking and hydrophobic effect.

Integrative study of pulmonary microbiome, transcriptome and clinical outcomes in Mycoplasma pneumoniae pneumonia.

BACKGROUND: This study aimed to investigate the interactions among three core elements of respiratory infection-pathogen, lung microbiome, and host response-and their avocation with the severity and outcomes of Mycoplasma pneumoniae pneumonia (MPP) in children. METHODS: We prospectively collected bronchoalveolar lavage fluid from a cohort of 41 children with MPP, including general MPP (GMPP) and complicated MPP (CMPP), followed by microbiome and transcriptomic analyses to characterize the association among pathogen, lung microbiome, and host response and correlate it with the clinical features and outcomes. RESULTS: The lung microbiome of patients with CMPP had an increased relative abundance of Mycoplasma pneumoniae (MP) and reduced alpha diversity, with 76 differentially expressed species. Host gene analysis revealed a key module associated with neutrophil function and several inflammatory response pathways. Patients with a high relative abundance of MP, manifested by a specific lung microbiome and host response type, were more prone to CMPP and had a long imaging recovery time. CONCLUSION: Patients with CMPP have a more disrupted lung microbiome than those with GMPP. MP, lung microbiome, and host response interacts with each other and are closely related to disease severity and outcomes in children with MPP.

A Metal-Free Triazacoronene-Based Bimodal VOC Sensor.

Developing suitable sensors for selective and sensitive detection of volatile organic compounds (VOCs) is crucial for monitoring indoor and outdoor air quality. VOCs are very harmful to our health upon inhalation or contact. Bimodal sensor materials with more than one transduction capability (optical and electrical) offer the ability to extract complementary information from the individual analyte, thus improving detection accuracy and performance. The privilege of manipulating the optoelectronic properties of the polycyclic aromatic hydrocarbon-based semiconducting materials offers rapid signal transduction in multimodal sensing applications. A thiophene-functionalized triazacoronene (TTAC) donor-acceptor-donor (D-A-D) type sensor is reported here for VOC sensing. The single-crystal X-ray structure analysis of the TTAC revealed that a distinctive supramolecular polymer architecture was formed because of cooperative π-π and intermolecular D-A interactions and exhibited rapid signal transduction upon exposure to specific VOCs. The TTAC-embedded green luminescent paper-based test strip exhibited an on-off fluorescence response upon nitrobenzene vapor exposure for 120 s. The selective and rapid response is due to the fast photoinduced electron transfer, as is evident from the time-resolved excited-state dynamics and density functional theory studies. The thick-film-based prototype chemiresistive sensor detects harmful VOCs in a custom-made gas sensing system including benzene, toluene, and nitrobenzene. The TTAC sensor rapidly responds (200 s) at relatively low temperatures (180 οC) compared to other reported metal-oxide-based sensors.

Next-Generation Femtech: Urine-Based Cervical Cancer Diagnosis Using a Fluorescent Biothiol Probe with Controlled Smiles Rearrangement.

Cervical cancer screening is a crucial field of femtech (female technology). In this work, we disclosed a new femtech solution─a simple, straightforward, and on-site applicable urine-based cervical cancer diagnostic method using a fluorescent biothiol probe. Our newly developed nitrobenzene-based fluorescent probe, named NPS-B, effectively differentiates between cysteine and homocysteine within urine samples via controlled Smiles rearrangement. The analysis of emission-based signals offers the potential utility of this method in cervical cancer. NPS-B was designed by considering the substitution effect and structural polarity of the nitrobenzene-based fluorophore. This controlled modification of nitrobenzene-induced substantial intramolecular charge transfer changes in the fluorophore when exposed to biothiols, resulting in significant changes in photophysical properties. NPS-B displayed different emissions of cysteine and homocysteine in clinical human urine (without prior urine treatment). Overall, our findings provide insights not only into fundamental chemical science but also into the broader domain of applied sciences.

Percutaneous biopsy for the diagnosis, risk stratification, and molecular profiling of neuroblastoma: A single-center retrospective study.

PURPOSE: To determine whether percutaneous core needle biopsy (PCNB) is adequate for the diagnosis and full molecular characterization of newly diagnosed neuroblastoma. MATERIALS AND METHODS: Patients with newly diagnosed neuroblastoma who underwent PCNB in interventional radiology at a single center over a 5-year period were included. Pre-procedure imaging and procedure details were reviewed. Rates of diagnostic success and sufficiency for International Neuroblastoma Pathology Classification (INPC), risk stratification, and evaluation of genomic markers utilized in the Children's Oncology Group risk stratification, and status of the anaplastic lymphoma kinase (ALK) gene were assessed. RESULTS: Thirty-five patients (13 females, median age 2.4 years [interquartile range, IQR: 0.9-4.4] and median weight 12.4 kg [IQR: 9.6-18]) were included. Most had International Neuroblastoma Risk Group Stage M disease (n = 22, 63%). Median longest axis of tumor target was 8.8 cm [IQR: 6.1-12]. A 16-gauge biopsy instrument was most often used (n = 20, 57%), with a median of 20 cores [IQR: 13-23] obtained. Twenty-five specimens were assessed for adequacy, and 14 procedures utilized contrast-enhanced ultrasound guidance. There were two post-procedure bleeds (5.7%). Thirty-four of 35 procedures (97%) were sufficient for histopathologic diagnosis and risk stratification, 94% (n = 32) were sufficient for INPC, and 85% (n = 29) were sufficient for complete molecular characterization, including ALK testing. Biologic information was otherwise obtained from bone marrow (4/34, 12%) or surgery (1/34, 2.9%). The number of cores did not differ between patients with sufficient versus insufficient biopsies. CONCLUSION: In this study, obtaining multiple cores with PCNB resulted in a high rate of diagnosis and successful molecular profiling for neuroblastoma.

Molecular toxicity of nitrobenzene derivatives to tetrahymena pyriformis based on SMILES descriptors using Monte Carlo, docking, and MD simulations.

It is challenging to model the toxicity of nitroaromatic compounds due to limited experimental data. Nitrobenzene derivatives are commonly used in industry and can lead to environmental contamination. Extensive research, including several QSPR studies, has been conducted to understand their toxicity. Predictive QSPR models can help improve chemical safety, but their limitations must be considered, and the molecular factors affecting toxicity should be carefully investigated. The latest QSPR methods, molecular modeling techniques, machine learning algorithms, and computational chemistry tools are essential for developing accurate and robust models. In this work, we used these methods to study a series of fifty compounds derived from nitrobenzene. The Monte Carlo approach was used for QSPR modeling by applying the SMILES molecular structure representation and optimal molecular descriptors. The correlation ideality index (CII) and correlation contradiction index (CCI) were further introduced as validation parameters to estimate the developed models' predictive ability. The statistical quality of the CII models was better than those without CII. The best QSPR model with the following statistical parameters (Split-3): (R2 = 0.968, CCC = 0.984, IIC = 0.861, CII = 0.979, Q2 = 0.954, QF12 = 0.946, QF22 = 0.938, QF32 = 0.947, Rm2 = 0.878, RMSE = 0.187, MAE = 0.151, FTraining = 390, FInvisible = 218, FCalibration = 240, RTest2 = 0.905) was selected to generate the studied promoters with increasing and decreasing activity.

Pentachloronitrobenzene disturbed murine ventricular wall development by inhibiting cardiomyocyte proliferation via Hec1 downregulation.

Exposure to the organochlorine fungicide pentachloronitrobenzene (PCNB) causes developmental abnormalities, including cardiac malformation. However, the molecular mechanism of PCNB cardiotoxicity remains elusive. We found that oral administration of PCNB to pregnant mice induced a hypoplastic wall with significant thinning of the compact myocardium in the developing hearts. PCNB significantly downregulates the expression of Hec1, a member of the NDC80 kinetochore complex, resulting in aberrant spindles, chromosome missegregation and an arrest in cardiomyocyte proliferation. Cardiac-specific ablation of Hec1 sharply inhibits cardiomyocyte proliferation, leading to thinning of the compact myocardium and embryonic lethality. Mechanistically, we found that activating transcription factor 3 (ATF3) transactivates Hec1 expression. Either HEC1 or ATF3 overexpression significantly rescues mitotic defects and restore the decreased proliferative ability of cardiomyocytes caused by PCNB exposure. Our findings highlight that maternal PCNB exposure disrupts embryonic cardiac function by inhibiting cardiomyocyte proliferation and interfering with ventricular wall development, partially attributed to the downregulation of the Atf3-Hec1 axis.

Percutaneous Core Biopsy Devices: A Detailed Review and Comparison of Different Needle Designs.

ABSTRACT: Percutaneous core-needle biopsy (PCNB) plays a growing and essential role in many medical specialties. Proper and effective use of various PCNB devices requires basic understanding of how they function. Current literature lacks a detailed overview and illustration of needle function and design differences, a potentially valuable reference for users ranging from early trainees to experts who are less familiar with certain devices. This pictorial aims to provide such an overview, using diagrams and magnified photographs to illustrate the intricate components of these devices. Following a brief historical review of biopsy needle technology for context, we emphasize distinctions in design between 2 major classes of PCNB devices (side- and end-cutting devices), focusing on practical implications for how each device is most effectively used. We believe a nuanced understanding of biopsy device function sheds light on certain lingering ambiguities in biopsy practice, such as the optimal needle gauge in organ biopsy, the benefits and risks associated with coaxial technique, the impact of needle selection and technique on bleeding, and the risk of unsuccessful sampling. In a subsequent pictorial, we will draw on the concepts presented here to illustrate examples of biopsy needle failure and how unrecognized needle failure can be an important and often preventable cause of increased biopsy risk and lower tissue yield.

Geobacter sulfurreducens promoted the biosynthesis of reduced graphene oxide and coupled it for nitrobenzene reduction.

In order to explore an efficient and green method to deal with nitrobenzene (NB) pollutant, reduced graphene oxide (rGO) as an electron shuttle was applied to enhance the extracellular electron transfer (EET) process of Geobacter sulfurreducens, which was a typical electrochemically active bacteria (EAB). In this study, rGO biosynthesis was achieved via the reduction of graphene oxide (GO) by G. sulfurreducens PCA within 3 days. Also, the rGO-PCA combining system completely reduced 50-200 µmol/L of NB to aniline as end product within one day. SEM characterization revealed that PCA cells were partly wrapped by rGO, and therefore the distance of electron transfer between strain PCA and rGO material was reduced. Beside, the ID/IG of GO, rGO, and rGO-PCA combining system were 0.990, 1.293 and 1.31, respectively. Moreover, highest currents were observed in rGO-PCA-NB as 12.950 µA/-12.560 µA at -408 mV/156 mV, attributing to the faster electron transfer efficiency in EET process. Therefore, the NB reduction was mainly due to: (I) direct EET process from G. sulfurreducens PCA to NB; (II) rGO served as electron shuttle and accelerated electron transfer to NB, which was the main degradation pathway. Overall, the biosynthesis of rGO via GO reduction by Geobacter promoted the NB removal process, which provided a facile strategy to alleviate the problematic nitroaromatic pollution in the environment.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene.

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Predicting subsolid pulmonary nodules before percutaneous needle biopsy: a comparison of artificial neural network and biopsy results.

AIM: To establish an artificial neural network (ANN) model to predict subsolid nodules (SSNs) before percutaneous core-needle biopsy (PCNB). The results of the two methods were compared to provide guidance on the treatment of SSNs. MATERIALS AND METHODS: This was a single-centre retrospective study using data from 1,459 SSNs between 2013 and 2021. The ANN was developed using data from patients who underwent surgery following computed tomography (CT) (SFC) and validated using data from patients who underwent surgery following biopsy (SFB). The prediction results of the ANN for the PCNB group and the histopathological results obtained after biopsy were compared with the histopathological results of lung nodules in the same group after surgery. Additionally, the choice of predictors for PCNB was analysed using multivariate analysis. RESULTS: There was no significant difference between the accuracies of the ANN and PCNB in the SFB group (p=0.086). The sensitivity of PCNB was lower than that of the ANN (p=0.000), but the specificity was higher (p=0.001). PCNB had better diagnostic ability than the ANN. The incidence of precursor lesions and non-neoplastic lesions in the SFB group was lower than that in the SFC group (p=0.000). A history of malignant tumours, size (2-3 cm), volume (>400 cm3) and mean CT value (≥-450 HU) are important factors for selecting PCNB. CONCLUSIONS: Both ANN and PCNB have comparable accuracy in diagnosing SSNs; however, PCNB has a slightly higher diagnostic ability than ANN. Selecting appropriate patients for PCNB is important for maximising the benefit to SSN patients.

Development of Magnetizable, Nickel-Ferrite-Decorated Carbon Nanocomposites as Hydrogenation Catalyst for Aniline Synthesis.

Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.

Degradation of Nitrobenzene by Mackinawite through a Sequential Two-Step Reduction and Oxidation Process.

Mackinawite (FeS) has gained increasing interest due to its potential application in contaminant removal by either reduction or oxidation processes. This study further demonstrated the efficiency of FeS in degrading nitrobenzene (ArNO2) via a sequential two-step reduction and oxidation process under neutral conditions. In the reduction stage, FeS rapidly reduced ArNO2 to aniline (ArNH2), with nitrosobenzene (ArNO) and phenylhydroxylamine (ArNHOH) serving as the intermediates. X-ray photoelectron spectroscopy (XPS) analysis indicated that both Fe(II) and S(II) in FeS contributed electrons to the reduction of ArNO2. In the subsequent oxidation stage with oxygen, by addition of 0.5 mM tripolyphosphate (TPP), ArNH2 generated in the reduction process could be effectively oxidized to aminophenols by hydroxyl radicals (•OH), which would undergo eventual mineralization via ring-cleavage reactions. TPP exerted a favorable role in enhancing •OH production for ArNH2 degradation by promoting the formation of the dissolved Fe(II)-TPP complex, thus enhancing the homogeneous Fenton reaction. Additionally, TPP adsorption inhibited the surface oxidation reactivity of FeS due to the change of Fe(II) coordination. Finally, the effective degradation of ArNO2 by FeS in actual groundwater was demonstrated by using this sequential reduction and oxidation approach. These research findings provide a theoretical basis for a new FeS-based remediation approach, offering an alternative way for comprehensive removal of ArNO2.

Influence of Ru doping on structural, optical, and photocatalytic properties of (Cd-Ni-Mn) nanoferrites.

This study reports the synthesis of (Cd0.4Ni0.4Mn0.2)Fe2-xRuxO4 nanoparticles (NPs), where x = 0.00, 0.005, 0.01, 0.015, 0.02, and 0.04, via co-precipitation method. The synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), and photoluminescence (PL) spectroscopy. The results confirmed the purity of the samples with the presence of a very small fraction of the hematite phase. Pseudo-spherical morphology was recognized from TEM images. Then, the prepared samples were further used as effective photocatalysts for the degradation of nitrobenzene under UV irradiation to examine the effect of doping on the photocatalytic activity. Among the synthesized samples, (Cd0.4Ni0.4Mn0.2)Fe1.985Ru0.015O4 NPs exhibited superior photocatalytic activity. This result is in good agreement with photoluminescence (PL) analysis in which (Cd0.4Ni0.4Mn0.2)Fe1.985Ru0.015O4 NPs revealed the slowest recombination rate of the electron-hole pair. To further improve the photocatalytic performance, different weight % of graphene was incorporated with (Cd0.4Ni0.4Mn0.2)Fe1.985Ru0.015O4 NPs. Finally, 81.41% of nitrobenzene was degraded after 180 min in the presence of 5 wt% graphene/(Cd0.4Ni0.4Mn0.2)Fe1.985Ru0.015O4 nanocomposites, and the degradation rate constant was estimated as 8.4 × 10-3 min-1.

In Situ Activatable Nitrobenzene-Cysteine-Copper(II) Nano-complexes for Programmed Photodynamic Cancer Therapy.

Photodynamic therapy (PDT) has been used to reduce cancerous and precancerous cells via reactive oxygen species (ROS) generation from photosensitizers. Numerous photosensitizers are available today to treat a variety of diseases, but their therapeutic efficacy is hindered within the tumor microenvironment, and there are safety concerns associated with their non-specific activation. In this work, we disclosed a nano-therapeutic based on in situ activatable nitrobenzene-cysteine-copper(II) nano-complexes (NCCNs) that work within cancer cells. Among the NCCNs, CyP shows outstanding potential as a promising candidate for programmed photodynamic cancer therapy with its unique properties such as (i) bright near-infrared imaging, (ii) chemodynamic therapeutic effect, (iii) photodynamic therapeutic effect (types I and II), and (iv) anti-cancer effect by anti-angiogenesis in early cancer stage under light. Overall, this work opens up exciting possibilities for the development of innovative and effective treatments for cancer, paving the way for future advancements in the clinical medicine field.

Phytotoxicity of nitrobenzene bioaccumulation in rice seedlings: Nitrobenzene inhibits growth, induces oxidative stress, and reduces photosynthetic pigment synthesis.

Nitrobenzene (NB) has been used in numerous industrial and agricultural fields as an organic compound intermediate. NB has mutagenicity and acute toxicity, and is typically a toxic pollutant in industrial wastewater worldwide. To evaluate its phytotoxicity, we treated rice (Oryza sativa) with different concentrations of NB (0, 5, 25, 50, 75, and 100 mg L-1). NB inhibited growth indices of rice (shoot and root length, fresh shoot and root weight, and dry shoot and root weight) as NB treatment concentrations increased. High concentrations (>25 mg L-1) of NB significantly inhibited rice root and shoot growth; root growth was more susceptible to NB. NB treatment could damage the structure and reduce the activity of rice seedling roots. The result of high performance liquid chromatography (HPLC) indicated that the bioaccumulation of NB in rice seedlings had a dose-dependent effect on the growth inhibition. NB reduced the photosynthetic pigment content and the expression levels of chlorophyll synthesis genes. NB treatment increased active oxygen radicals, electrical conductivity, malondialdehyde (MDA), proline, and soluble sugar contents. The expressions of antioxidant enzyme genes were induced by NB stress, and exhibited a phenomenon of initial increase followed by decrease. When the NB concentration was higher than 50 mg L-1, the gene expression levels decreased rapidly. This study provides insight into the association between exposure to NB and its phytotoxic effects on rice seedlings, and assesses the potential risk of NB bioaccumulation for crops that require a large amount of irrigation water.

Evaluation of the hydrogenation reaction on the electrocatalytic nitrobenzene degradation over (FeCoNiCuZn)xOy high entropy oxides (HEOs).

Environmental pollution is one of the main challenges currently faced by mankind; especially industrial waste-waters treatment and remediation using energy-efficient methodologies. This research focused on the electrochemical degradation of the hazardous nitrobenzene (NB) in aqueous solutions, using novel high-entropy oxide (HEO) electrodes to elucidate the influence of the electrochemical reduction step on the degradation process. The effect of solution pH, dissolved oxygen concentration, anodic applied potential, and cell configurations on NB hydrogenation reaction were evaluated. A synergistic effect between the hydrogenation of nitrobenzene and the degradation was found to drastically enhance the conversion rates. The presence of dissolved oxygen promoted the oxidation reactions, reaching more than 90% nitrobenzene removal at 1.7 V and pH 14. The degradation of the organic by-products was attributed to the formation of the superoxide radical (O2*-) as the main oxidant species. A degradation mechanism was proposed based on the detected intermediates and the decoupling of electrochemical surface reactions observed by EIS at different solution pH.

Amine Functionalization Leads to Enhanced Performance for Nickel- and Cobalt-Ferrite-Supported Palladium Catalysts in Nitrobenzene Hydrogenation.

Easy preparation, good yield and easy recovery are the key challenges in the development of industrial catalysts. To meet all these three criteria, we have prepared intelligent, magnetizable NiFe2O4- and CoFe2O4-supported palladium catalysts that can be easily and completely recovered from the reaction medium by magnetic separation. The fast and facile preparation was achieved by a solvothermal method followed by sonochemical-assisted decomposition of the palladium nanoparticles onto the surface of the magnetic nanoparticles. The metal-support interaction was enhanced by amine functionalization of the supports using monoethanolamine. The performance and stability of the non-functionalized and amine-functionalized NiFe2O4- and CoFe2O4-supported palladium catalysts were compared in the industrially important nitrobenzene hydrogenation reaction. All catalysts showed high catalytic activity during aniline synthesis; complete nitrobenzene conversion and high aniline yield (above 97 n/n%) and selectivity (above 98 n/n%) were achieved. However, during reuse tests, the activity of the non-functionalized catalysts decreased, as the palladium was leached from the surface of the support. On the other hand, in the case of their amine-functionalized counterparts, there was no decrease in activity, and a non-significant decrease in palladium content could be measured. Based on these results, it can be concluded that amine functionalization of transition metal ferrites may result in more effective catalysts due to the enhanced metal-carrier interaction between the support and the precious metal.