Comparison of PAS and adenoids in patients with and without maxillary micrognathia before orthodontic treatment.

OBJECTIVE: Craniofacial anomalies are widely discussed as predisposing factors of breathing disorders. Since many more cofactors exist, this study investigated the association between maxillary micrognathia and morphological changes of posterior airway space and adenoids in these patients. MATERIAL AND METHODS: Cephalometric radiographs of n = 73 patients were used for data acquisition. The patients were divided into two groups according to certain skeletal characteristics: maxillary micrognathia (n = 34, 16 female, 18 male; mean age 10.55 ± 3.03 years; defined by a SNA angle < 79°) and maxillary eugnathia (n = 39, 19 female, 20 male; mean age 10.93 ± 3.26 years; defined by a SNA angle > 79°). The evaluation included established procedures for measurements of the maxilla, posterior airway space and adenoids. Statistics included Kolmogorov-Smirnov-, T- and Mann-Whitney-U-Tests for the radiographs. The level of significance was set at p < 0.05. RESULTS: The cephalometric analysis showed differences in the superior posterior face height and the depth of the posterior airway space at palatal level among the two groups. The depth of the posterior airway space at mandibular level was the same for both groups, just as the size of the area taken by adenoids in the nasopharynx. CONCLUSIONS: Skeletal anomalies affect the dimension of the posterior airway space. There were differences among the subjects with maxillary micrognathia and these with a normal maxilla. However, the maxilla was only assessed in the sagittal direction, not in the transverse. This study showed that the morphology of the maxilla relates to the posterior airway space whereas the adenoids seem not to be affected. CLINICAL RELEVANCE: Maxillary micrognathia is significantly associated with a smaller depth of the posterior airway space at the palatal level compared to patients with maxillary eugnathia.

CORRELATION BETWEEN TRANSVERSE CEPHALOMETRIC PARAMETERS AND THE SEVERITY OF SKELETAL MALOCCLUSIONS.

Malocclusion prevalence varies globally, ranging from 34.9% to 93.6% for Class I, 4.4% to 44.7% for Class II, and 1.4% to 19.4% for Class III occlusions. This study aims to assess transverse cephalometric measurements related to maxillary and mandibular dimensions, intermolar and intercanine distances, and other relevant factors. The descriptive cross-sectional research included 100 individuals with malocclusion grades 1, 2, and 3. The study involved 100 participants across three age groups (15-21, 22-28, 29-35), with the majority in the 22-28 range. Gender distribution showed a significant imbalance (77% female, 23% male). Cephalometric measurements for three malocclusion types revealed distinct patterns. Notably, inter-molar width exhibited a strong positive correlation with malocclusion severity (Malocclusion 1: r=0.504 to 0.561, Malocclusion 2: r=0.560 to 0.625, Malocclusion 3: r=0.625 to 0.559), while maxillary-mandibular transverse discrepancy had a negative correlation (Malocclusion 1: r=-0.496, Malocclusion 2: r=-0.483, Malocclusion 3: r=-0.483). Age-diverse sample, gender imbalance noted. Cephalometric correlations reveal inter-molar width association with malocclusion severity, emphasizing clinical implications.

Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. MATERIALS AND METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability. CONCLUSION: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. CLINICAL RELEVANCE: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

Evaluation of mandibular growth in a prepubertal Class I and Class II population: a longitudinal analysis.

OBJECTIVE: This study aims to identify the presence, timing, and magnitude of a prepubertal mandibular growth spurt in a Class I and Class II population. METHODS: From the Burlington and Iowa Growth study of the AAOF Craniofacial Growth Legacy Collection, 83 Class I subjects (37 females and 46 males) and 32 Class II subjects (18 males and 14 females) were identified, as having at least seven consecutive annual lateral cephalograms taken from 5 to 11 years of age. Only subjects with a normodivergent facial pattern were considered. A customized cephalometric analysis was performed, and total mandibular length, defined as the distance between Condylion (Co) and Gnathion (Gn), was calculated. RESULTS: Overall, a significant early peak of mandibular growth was present in all the subjects analysed both in Class I (4.69 mm for males and 4.18 mm for females; P < .05) and in Class II (5.85 mm for males and 4.05 mm for females; P < .05). No differences between males and females were found for the timing of this peak (7 years for Class I and Class II females and 7 years for Class I and 6.5 years for Class II males). In males, a significantly larger peak was observed in Class II than Class I subjects (P = .007). LIMITATIONS: The main limitations of this study were the impossibility of using a suitable growth indicator to identify the timing of the early mandibular growth peak and the limited Class II records retrievable. CONCLUSION: This investigation suggests that a prepubertal mandibular growth peak is consistently present in both Class I and Class II males and females of clinically significant magnitude. Despite that, chronological age confirms to be unsuitable to identify this peak.

Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy.

OBJECTIVES: Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS: The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS: At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION: The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE: This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.

Photographic analysis of orofacial soft tissue alterations related to rapid maxillary expansion in pediatric patients.

Maxillary transverse deficiency is widely recognized as one of the most common skeletal issues in orthodontics, and rapid maxillary expansion (RME) is commonly employed as a treatment method. This study aimed to investigate the impact of RME on the soft tissues of the orofacial region in pediatric patients. The study included two groups: an experimental group comprising 30 patients (16 females and 14 males) with maxillary skeletal transverse deficiency who required rapid maxillary expansion (RME), and a control group consisting of patients (10 females and 10 males) who did not require RME or orthodontic treatment. Frontal and profile photographs were taken before and after RME for both groups. Frontal photographs were used to obtain 12 linear measurements, while profile photographs were used to perform 2 linear and 2 angular measurements using the "protractor" and "pixel ruler" software. Burstone-Legan, Steiner and Rickett's analyses were performed to determine the locations of the upper and lower lips. Student t-test, paired samples t-test and Mann-Whitney U test were used to evaluate the data. In the experimental group, there was a statistically significant increase in nose width and intercommissural distance at the end of the treatment (p < 0.05). Similarly, both the experimental and control groups showed a statistically significant increase in the dorsum of nose length at T2 compared to the initial measurement (p < 0.05). Furthermore, the male participants in the experimental group exhibited a statistically significantly higher increase in nose length and dorsum of the nose during the T1 and T2 periods compared to the female participants in the experimental group (p < 0.05). RME may lead to changes in soft tissues in pediatric patients and was observed to be gender-specific. However, these changes were not clinically noticeable, and long-term follow-up studies are needed to determine the long-term effects of these changes.

Preliminary study on cranial measurements and sexual dimorphism in skull bones of gaur (Bos gaurus gaurus, Smith 1827).

Cranial measurements have been widely used in various studies in wildlife sciences, ranging from understanding predator ecology to wildlife forensics. However, detailed description of morphometry and sexual dimorphism of the skull of gaur Bos gaurus gaurus is lacking. The present study was undertaken to determine the sexual dimorphism based on the cranial measurements of gaur. A total of 12 individual gaur skulls of male (n = 6) and female (n = 6) were studied in the field from the naturally deceased animals between January 2018 and December 2021 in different ranges of Bandhavgarh tiger reserve (BTR), Madhya Pradesh, India. The skull measurements were analysed using univariate and multivariate statistics to determine whether cranial dimensions could be used to differentiate male and female skulls reliably. A total of 43 morphometrical parameters grouped into nine indices were calculated. Select morphometrical parameters viz PL, GFL, AKI, LBB, LFB, GBEE, GBAN, BPOP and GTCH were significantly different (p < 0.05) between sexes, whereas GBAN were significantly higher in female skulls. The measurements demonstrated that the skull of the gaur was dolichocephalic as the profile length and the otion to otion breath in both male and female were <75% of the length. Overall, 28 linear measurements of both the sexes were statistically significant (p < 0.05; <0.01). The calculated indices revealed that the foramen magnum index in the female gaur were significantly higher. In calculated cranial indices the facial index (a) was higher in female and facial index (b) were higher in males. The two important parameters, facial breadth in facial index (a) and the greatest breadth in facial index (b) were positively correlated, though facial index (a) was statistically not significant between the sexes. The greater inner length of the foramen magnum in female skull resulted in foramen being oval whereas it was circular in males. These parameters were decisive for sexual dimorphism, skull comparison and craniological studies. This study ascertained that the frontal index and skull index had no significant influence and were not good indices for discriminating skulls between male and female. Based on the Principal Component Analysis, it was found that skull of male and female gaurs exhibits differences in cranial morphology viz. cranial profile length or total length (PL) and the least inner height of the temporal groove (LIHT). The findings of the present study provide baseline information on various craniometrical measurements of skull of gaur, indices and parameters for sex identification that can be effectively used in understanding sex biased predation ecology, provide base line information to describe variation across its geographic range, and in identifying skulls recovered in wildlife offence cases.

Occlusal characteristics in modern humans with tooth agenesis.

Non-syndromic permanent tooth agenesis affects a significant proportion of the population, especially if third molars are considered. Although tooth agenesis has been linked to a smaller craniofacial size, reduced facial convexity and a shorter skeletal face, the occlusal characteristics of individuals with tooth agenesis remain largely unexplored. Therefore, this study investigated potential associations between tooth agenesis and metric occlusal traits in 806 individuals (491 with 4.1 missing teeth per subject, including third molars, and 315 without any tooth agenesis). Dentoskeletal morphology was defined through anatomical landmarks on pre-treatment cephalometric radiographs. Multivariate regression models, adjusted for sex and age, showed that tooth agenesis was significantly associated with a reduced overjet, an increased interincisal angle, and shorter upper and lower dental arch lengths, but not with overbite. Moreover, apart from reduced tooth length and dentoalveolar effects, as the number of missing teeth increased the upper front teeth were progressively retruded according to the craniofacial complex and to the face. Thus, tooth agenesis has a substantial influence on dental and occlusal characteristics, as well as on the sagittal position and inclination of anterior teeth. These findings emphasize the necessity for personalized, multidisciplinary approaches in individuals with multiple agenesis to successfully meet treatment goals.

Fully automated landmarking and facial segmentation on 3D photographs.

Three-dimensional facial stereophotogrammetry provides a detailed representation of craniofacial soft tissue without the use of ionizing radiation. While manual annotation of landmarks serves as the current gold standard for cephalometric analysis, it is a time-consuming process and is prone to human error. The aim in this study was to develop and evaluate an automated cephalometric annotation method using a deep learning-based approach. Ten landmarks were manually annotated on 2897 3D facial photographs. The automated landmarking workflow involved two successive DiffusionNet models. The dataset was randomly divided into a training and test dataset. The precision of the workflow was evaluated by calculating the Euclidean distances between the automated and manual landmarks and compared to the intra-observer and inter-observer variability of manual annotation and a semi-automated landmarking method. The workflow was successful in 98.6% of all test cases. The deep learning-based landmarking method achieved precise and consistent landmark annotation. The mean precision of 1.69 ± 1.15 mm was comparable to the inter-observer variability (1.31 ± 0.91 mm) of manual annotation. Automated landmark annotation on 3D photographs was achieved with the DiffusionNet-based approach. The proposed method allows quantitative analysis of large datasets and may be used in diagnosis, follow-up, and virtual surgical planning.

Evaluation of mandibular motion in adolescents with skeletal class II division 1 malocclusion during mandibular advancement using clear functional aligners: a prospective study.

BACKGROUND: This study aimed to evaluate the characteristics of mandibular protrusive condylar trajectory in adolescents with skeletal Class II Division 1 malocclusion and the changes of condylar trajectory during mandibular advancement (MA) treatment using clear functional aligners. METHODS: This prospective study consisted of a cross-sectional study and a longitudinal study. In cross-sectional study, sixty-one adolescents were divided into two groups: Class I (n = 30) and Class II Division 1 (n = 31). The condylar trajectory was measured and compared using the Mann-Whitney U test. The longitudinal study was the MA treatment group using clear functional aligner and consisted of 16 participants from Class II Division 1group. The condylar trajectory was collected at three-time points: pre-treatment (T1), during MA treatment at approximately 3 months (T2, 105.6 days average), and at the end of MA treatment (T3, 237.6 days average). The changes at T1, T2, and T3, as well as the symmetry between the left and right condyles across all groups, were examined using the Wilcoxon paired test. RESULTS: A greater increase in the anteroposterior displacement and space displacement during protrusive movements was observed in the Class II Division 1 group compared with that in the Class I group, with a large difference being observed in the left and right condylar movements. The condylar anteroposterior displacement and space displacement decreased significantly at T2 and increased significantly at T3; however, no significant difference was observed between T1 and T3. A significant difference was observed between the condylar movement on the left and right sides at T1; however, no significant difference was observed at T2 and T3. CONCLUSIONS: Adolescents with Class II Division 1 malocclusion had higher protrusive capacity than those with Class I. Moreover, their left and right condylar motion was more asymmetric. The range of condyle motion decreased first and then increased during MA therapy, and the left and right condyle movement became more symmetrical, which may be the adaptive response of neuromuscular function to the changes in jaw position.

A retrospective study evaluating the influence of Class III correction appliances on the sagittal pharyngeal airway dimension.

The aim of this study was to compare the effects of Class III correction appliances including the Facemask (FM), and the new non-compliance fixed functional appliances such as the Reversed Forsus Fatigue Resistant Device (FRD), as well as the CS-2000 (CS), on the sagittal pharyngeal airway dimension (SPAD). Pre-treatment and post-treatment lateral cephalograms of 45 patients who underwent Class III appliance treatment, using either FM, Reversed FRD, or CS were collected from the files of treated patients. SPAD changes were evaluated in each group, and comparisons were conducted between the three study groups. Additionally, sagittal and vertical skeletal measurements were conducted. The FM, the Reversed FRD, and the CS, were found to generate a significant increase in the SPAD, with the Reversed FRD contributing to the most significant change at the OPAA (116.80 ± 26.36 mm2). All three appliances elicited significant antero-posterior changes in the SNA°, SNB°, and ANB°, also with the greatest intermaxillary change documented with the employment of the Reversed FRD (ANB° = 3.33 ± 0.82°). As for the vertical dimension, the FM, the Reversed FRD, and the CS elicited significant FMA° increases, with the greatest change attributed to the FM (FMA° = 2.32 ± 0.97°). Therefore, the three tested Class III corrective appliances generated significant SPAD, antero-posterior, and vertical changes. However, the Revered FRD showed a superior impact in increasing the SPAD at the OPAA level and in eliciting significant intermaxillary changes.

Do patients with different craniofacial patterns have differences in upper airway volume? A systematic review with network meta-analysis.

BACKGROUND: Craniofacial skeletal discrepancies have been associated with upper airway dimensions. OBJECTIVE: To identify differences in upper airway volume across different sagittal and vertical skeletal patterns. SEARCH METHODS: Unrestricted literature searches in eight databases/registers for human studies until May 2023. SELECTION CRITERIA: Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology. DATA COLLECTION AND ANALYSIS: Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach. RESULTS: Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total  pharyngeal airway volume, with Class II having decreased airway volume (-2256.06 mm3; 95% Confidence Interval [CI] -3201.61 to -1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (-1716.77 mm3; 95% CI -3296.42 to -137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA. CONCLUSIONS: Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children-adult patients, and incomplete reporting. CLINICAL TRIAL REGISTRATION: PROSPERO (CRD42022366928).

Relationships of Sagittal Skeletal Discrepancy, Natural Head Position, and Craniocervical Posture in Pakistani Children.

OBJECTIVE: To assess the natural head position (NHP), mean sagittal skeletal discrepancy, and craniocervical posture in children presenting to tertiary care hospital. STUDY DESIGN: Observational study. Place and Duration of the Study: Department of Orthodontics, Karachi Medical and Dental College, Karachi, Pakistan, from January to April 2022. METHODOLOGY: A total of 121 participants, of either gender aged 11 to 15 years, were selected for this study. The mean age of the participants was 13.4 ± 1.2 years, and their average Frankfort mandibular plane angles (FH/ML) were recorded. Data collection took place following approval from the Ethics Review Board (ERB), and verbal informed consent was obtained from all participants. Cephalometric radiographs were taken in the natural head position (NHP) for all 121 participants. Based on their ANB angles, the participants were categorised into skeletal classes I, II, and III. The study assessed and compared variables such as head posture, craniocervical posture, and sagittal craniofacial morphology. RESULTS: The study included a sample of 121 children with a mean age of 13.4 ± 1.2 years. Among the participants, 58% were males, while 42% were females. Based on their ANB angles, participants were classified into skeletal classes I (n=44), II (n=73), and III (n=4). The correlation analysis between craniofacial posture, natural head position, and sagittal skeletal classes (I, II, and III) did not reveal any statistically significant results. Moreover, within each skeletal class, there were no significant differences observed in craniocervical posture between males and females when considering demographic variables. CONCLUSION: This study indicates that there is no discernible difference in the craniocervical posture of young Pakistani children aged 11 to 15 years, regardless of gender, in relation to skeletal relationships in classes I, II, and III. These findings suggest that sagittal skeletal discrepancies may not significantly impact craniocervical posture in this particular age group. KEY WORDS: Craniocervical posture, Sagittal discrepancy, Natural head position.

Self-Recognition and Self-Preference Regarding Facial Profile and Its Association with A-Point-Nasion-B-Point (ANB) Angle in Orthodontic Patients.

OBJECTIVE: To detect any association between the A-Point-Nasion-B-Point angle, self-recognition and self-preference, and to find the association of these variables with the skeletal class, age, and gender. STUDY DESIGN: Cross-sectional study. Place and Duration of the Study: Department of Orthodontics and Dentofacial Orthopaedics, Khyber College of Dentistry, from October 2022 to April 2023. METHODOLOGY: A right-sided profile photograph of each participant was taken, and the lower jaw was moved 5mm backward and forward to produce 2 alterations. The participants were shown their 3 photographs, from which they picked the one they perceived to be their original photograph and the one they preferred for themselves. Chi-square tests for association and binary logistic regression were employed to find the associations between the variables. The alpha value was 0.05. RESULTS: Ninety-eight male and 109 female orthodontic patients, mean age of 17.08 + 4.78 years, were recruited. A significant proportion of participants (51.2%) correctly identified themselves. Every degree increase in ∠ANB reduced the odds of correct self-recognition, and of self-preference for the original profile, by 1.1. There was self-preference for that profile which the participants believed was the original (57%). Skeletal class III were less likely to prefer a protrusive profile (p = 0.005). Patients aged between 15 to 22 years were able to correctly identify their profiles (63.9%, p <0.001). CONCLUSION: There is an association between facial profile self-recognition and self-preference. The ∠ANB negatively relates to self recognition. An increase in ∠ANB reduces self-preference for the original profile. KEY WORDS: Cephalometry, Dental photography, Self-perception, Corrective orthodontics.

Comparison of craniometric measurements of New Zealand rabbit (Oryctolagus cuniculus L.) using three-dimensional scanner with digital calliper measurements: A methodological study.

As technology has developed in recent years, the use of three-dimensional (3D) scanners and printers has become widespread in the medical field. However, since this field is new, all kinds of methodological and experimental related studies gain importance. This study aimed to identify the differences between the calliper measurements by determining the craniometric data on the models constructed by scanning the crania of New Zealand Rabbits (Oryctolagus cuniculus L.), preferred as experimental animals, with a three-dimensional scanner. Therefore, a total of 12 New Zealand rabbits including 6 females and 6 males were used. After the crania that comprised the study material were macerated, they were subjected to 3D scanning. After the scanning process was completed, they were craniometrically measured both on the scanned models and by using a digital calliper. Analysis of the craniometric data of the 3D scanner showed that there was a difference between sexes at the level of p < 0.05 in widest length between the external acoustic meatus (WLBEAM), skull width and Foramen magnum height (FMH) parameters and cranial index data, and at the level of p < 0.001 in the largest nasal width (LNW) parameter. A statistical difference was found between sexes in frontal length, WLBEAM, LNW and FMH parameters and cranial index values in craniometric data collected with the digital calliper (p < 0.05). Consequently, the data collected in this study were found to be close to each other in both methods, suggesting that the 3D scanner may be used in morphometric studies.

[Mandibular osteotomy, a simpler and safer method of osteosynthesis]. / Ostéotomie mandibulaire, une méthode plus simple et plus sûre d'ostéosynthèse.

Bilateral sagittal split osteotomy (BSSO) is a surgical procedure to treat mandibular malpositions. However, this surgery is associated with a risk of recurrence. Osteosynthesis techniques may be the cause of early recurrences. This study aims to demonstrate the efficiency and stability of osteosynthesis with two bicortical screws placed with a transjugal approach. We included patients who benefited from a BSSO alone, between May 2020 and August 2021. We performed the osteosynthesis using two bicortical screws placed with a transjugal approach. All the patients underwent lateral X-rays before the surgery, one week after and minimum six months after the intervention. These medical images allowed to study the mandibular movements during the intervention and the osteosynthesis stability. Twenty-five patients benefited from a BSSO alone. Patients obtained a satisfactory occlusal result. The results showed good stability of the two fragments, after surgery, during the studied period (average follow up of 8 months). Two bicortical screws osteosynthesis placed with a transjugal approach is a simple, effective and stable method for osteosynthesis in case of BSSO.

Les ostéotomies sagittales bilatérales mandibulaires (OSBM) sont des procédures chirurgicales utilisées pour traiter les malpositions mandibulaires. Toutefois, cette chirurgie présente un risque de récidive. Les techniques d'ostéosynthèse pourraient être la cause de récidives précoces. Cette étude vise à démontrer l'efficacité et la stabilité de l'ostéosynthèse à l'aide de deux vis bicorticales placées par voie transjugale. Nous avons inclus les patients ayant bénéficié d'une OSBM seule, entre mai 2020 et août 2021. Nous avons réalisé les ostéosynthèses à l'aide de deux vis bicorticales placées par voie transjugale. Tous les patients ont réalisé des clichés radiologiques de profil avant l'intervention, une semaine après et minimum six mois après. Ces imageries ont permis d'étudier les mouvements mandibulaires durant l'intervention et la stabilité de l'ostéosynthèse. Vingt-cinq patients ont bénéficié d'une OSBM seule. Les patients ont obtenu un résultat occlusal satisfaisant. Les résultats ont montré une bonne stabilité des deux fragments après la chirurgie durant la période étudiée (en moyenne, recul de 8 mois). En conclusion, l'ostéosynthèse à l'aide de deux vis placées par voie transjugale est une méthode simple, efficace et stable d'ostéosynthèse d'OSBM.