Structural and thermoluminescence properties of lithium borate glass matrices under UV and beta radiation.

In the present work, glass samples in the (100 - x)B2O3-xLi2O binary system, with x varying from 30 to 50 mol%, were prepared using the conventional melting and moulding method, with the main objective of evaluating the thermoluminescence response when exposing these materials to ultraviolet (UV) radiation. Complementary analysis based on density, optical absorption on the UV-visible region (UV-vis absorbance), Fourier transform infrared spectroscopy on the medium region, X-ray diffraction, and differential thermal analysis measurements were performed. Thermoluminescence measurements of vitreous samples showed glow curves with at least one peak with a maximum temperature of ~170°C after exposure to UV radiation in the temperature range 50-250°C. Samples were also exposed to beta radiation in the temperature range 25-275°C, also showing single peaks with a maximum temperature of ~150°C.

Borax induces ferroptosis of glioblastoma by targeting HSPA5/NRF2/GPx4/GSH pathways.

Glioblastoma multiforme (GBM) is a highly aggressive and lethal form of primary brain tumour. Borax has been demonstrated to exhibit anti-cancer activity through cell death pathways. However, the specific impact of borax on ferroptosis in GBM is not well-established, and the underlying regulatory mechanisms remain unclear. Initially, the effective concentration of borax on cell viability and proliferation in U251 and A172 cells was determined. Subsequently, the effects of borax on the wound healing were analysed. Nuclear factor erythroid 2-related factor 2 (NRF2), glutathione peroxidase 4 (GPx4), glutathione (GSH), HSP70 protein 5 (HSPA5), malondialdehyde (MDA) levels and caspase-3/7 activity were determined in borax-treated and untreated cells. Finally, the protein expression levels of HSPA5, NRF2 and GPx4 were analysed. Borax suppressed cell viability and proliferation in U251 and A172 cells in a concentration- and time-dependent manner. In addition, borax treatment decreased GPx4, GSH, HSPA5 and NRF2 levels in U251 and A172 cells while increasing MDA levels and caspase-3/7 activity. Moreover, borax reduced mRNA and protein levels of HSPA5, NRF2 and GPx4 in U251 and A172 cells. Consequently, borax may induce ferroptosis in GBM cells and regulate the associated regulatory mechanisms targeting NRF2 and HSPA5 pathways. This knowledge may contribute to the development of novel therapeutic approaches targeting ferroptosis in GBM and potentially improve patient outcomes.

Structural, photoluminescence, and optical characteristics of a Sm3+ -doped lead borate-strontium-tungsten glass system: Evaluation of Judd-Ofelt intensity parameters and radiative properties.

In this study, the melt quenching approach is used to synthesize a lead borate-strontium-based glass system doped with samarium ions. Modifications in the glass network structure arising from the addition of various concentrations of Sm3+ ions were investigated via Fourier transform infrared (FTIR) spectroscopy. FTIR analysis revealed B-O-B bridges, BO3 , and BO4 units are present. UV-vis-NIR spectroscopic measurement was performed to study the optical absorption spectra. Optical constants such as optical bandgap energies, refractive indices, and other related parameters were evaluated. The lifetime fluorescence decay was measured and ranged between 1.04 and 1.88 ns. The photoluminescence spectra in the range 500-750 nm revealed four transitions from the ground state 6 G5/2 to the excited states 6 H5/2 , 6 H7/2 , 6 H9/2 and 6 H11/2 and J-O theory was utilized to study these optical transitions for Sm3+ ions. Calculations of the oscillator strengths and J-O intensity parameters were performed and the obtained J-O parameters followed the sequence Ω4 > Ω6 > Ω2 . The ratio O/R indicated a high lattice asymmetry around the samarium ions. The values of lifetimes and branching ratios for the fabricated samples emphasized their suitability to be used in laser applications. The current glass samples are good candidates for orange and red emission devices.

A co-type ductile film with high tensile strength and fast self-healing properties for shaped fruit preservation.

Traditional petroleum-based plastics have high energy consumption, require professional equipment, are non-degradable after use, and lack antibacterial properties, making it impossible to achieve long-lasting freshness in fruits and vegetables. Herein, we report a novel co-type film-forming method with low energy consumption and without production equipment, which uses PVA-borax gel as a substrate and adds a certain proportion of CMC and TA to prepare multifunctional CMC/TA@PVA-borax composite hydrogels (CTPB). The dynamic borax ester bonding and hydrogen bonding in the CTPB hydrogel results in an ultra-high tensile strength of more than 5500% and rapid self-healing within 8 s. Interestingly, hydrogels can be arbitrarily shaped and stretched like play dough and thus can be stretched into ductile films by co-type film formation. The antimicrobial properties of the hydrogel film can be attributed to the synergistic effects of TA and borax. The mussel structure of TA allows the hydrogel film to adhere directly to different surfaces for more effective bacterial killing. In addition, the hydrogel film has a high level of biosafety and biodegradability and shows good performance in fruit storage. This study provides a convenient and low-energy method for the preparation of films, which in part reduces the increasing environmental pollution caused by petroleum-based plastics.

Separation of carbohydrates using dynamically adsorbed borate stationary phase for hydrophilic interaction liquid chromatography.

In this work, a chromatographic method for the separation of carbohydrates was proposed. Tris-(hydroxymethyl)-amine (TRIS) functionalized silica-based hydrophilic interaction liquid chromatography (HILIC) stationary was synthesized. The dynamically absorbed borate layer is generated by using borate buffer as a polar modifier due to the complexation of borate with TRIS ligand in the stationary phase. The chromatographic systems were analyzed by the linear solvation energy relationship model. The calculated system constants revealed the enhancement of anionic exchange by the addition of borate in the mobile phase system. In addition, ligand exchange is critical for the retention and elution order of sugars and sugar alcohols. Carbohydrates displayed prolonged retention with different selectivity profiles relating to their complexation coefficients with borate. Experiment results showed that the effect of borate in this chromatographic system was stable within the range of pH 3-7 and borate concentration of 5-15 mM. This work provides a complementary solution for the separation of carbohydrates. It can also be extended to the separation of glycosides.

Desirable Strong and Tough Adhesive Inspired by Dragonfly Wings and Plant Cell Walls.

The production of wood-based panels has a significant demand for mechanically strong and flexible biomass adhesives, serving as alternatives to nonrenewable and toxic formaldehyde-based adhesives. Nonetheless, plywood usually exhibits brittle fracture due to the inherent trade-off between rigidity and toughness, and it is susceptible to damage and deformation defects in production applications. Herein, inspired by the microstructure of dragonfly wings and the cross-linking structure of plant cell walls, a soybean meal (SM) adhesive with great strength and toughness was developed. The strategy was combined with a multiple assembly system based on the tannic acid (TA) stripping/modification of molybdenum disulfide (MoS2@TA) hybrids, phenylboronic acid/quaternary ammonium doubly functionalized chitosan (QCP), and SM. Motivated by the microstructure of dragonfly wings, MoS2@TA was tightly bonded with the SM framework through Schiff base and strong hydrogen bonding to dissipate stress energy through crack deflection, bridging, and immobilization. QCP imitated borate chemistry in plant cell walls to optimize interfacial interactions within the adhesive by borate ester bonds, boron-nitrogen coordination bonds, and electrostatic interactions and dissipate energy through sacrificial bonding. The shear strength and fracture toughness of the SM/QCP/MoS2@TA adhesive were 1.58 MPa and 0.87 J, respectively, which were 409.7% and 866.7% higher than those of the pure SM adhesive. In addition, MoS2@TA and QCP gave the adhesive good mildew resistance, durability, weatherability, and fire resistance. This bioinspired design strategy offers a viable and sustainable approach for creating multifunctional strong and tough biobased materials.

Second near-infrared fluorescent Metal-Organic framework sensors for in vivo extracellular adenosine triphosphate monitoring.

Plant nanobionic sensors enable real-time monitoring of signaling molecules in plants by interfacing them with specifically designed nanoprobes, which have been acknowledged as species-independent analytical tools. In this study, we developed a plant nanobionic sensor for in vivo detection of extracellular adenosine triphosphate (eATP) in living plants by designing a novel second near-infrared (NIR-II) fluorescent metal-organic framework (MOF) nanoprobe. The NIR-II fluorescent nanoprobe (IR-1061 micelle@ZIF-90) with a sandwich structure was synthesized by successive encapsulation of the hydrophobic NIR-II dye IR-1061 with the amphipathic polymer DSPE-mPEG 2000 and MOF ZIF-90. Interestingly, coating ZIF-90 around IR-1061 micelles increased the NIR-II fluorescence 16.6-fold. Utilizing the ultrahigh NIR-II fluorescent emission of the designed nanoprobes and specific recognition of ZIF-90 to ATP, the nanoprobes were applied to spatial and temporal monitoring eATP in model and non-model plants under environmental stress.

Anti-Microbial Effect of AgBr-NP@CTMAB on Streptococcus Mutans and Assessment of Surface Roughness Hardness and Flexural Strength of PMMA.

Purpose: To investigate the inhibition of Streptococcus mutans (S.mutans) and its biofilm by AgBr-nanoparticles (NP) @CTMAB (cetyltrimethyl-ammonium bromide) and evaluate the changes in Polymethyl methacrylate (PMMA)'s surface roughness (Ra), microhardness, and flexural strength during prolonged immersion in AgBr-NP@CTMAB for application in the denture cleaning industry. Patients and Methods: The antibacterial activity of AgBr-NP@CTMAB against S.mutans was measured colony formation assay, OD600 and laser confocal microscopy. Changes in the specimens' values for surface roughness, microhardness, and flexural strength (MPa) were measured after immersion solutions for 180 or 360 days. Results: The AgBr-NP@CTMAB solution exhibited a robust antibacterial effect on planktonic S. mutans, with a minimum bactericidal concentration of 5 µg/mL. The 10 µg/mL AgBr-NP@CTMAB solution efficiently inhibited S. mutans biofilm formation. (2) No significant difference in surface roughness after immersion in AgBr-NP@CTMAB (10 µg/mL and 20 µg/mL) comparing with distilled water (P > 0.05) and Polident had significantly higher than distilled water (P < 0.05). There was a significant decrease in the surface hardness of the PMMA specimens that were immersed in the Polident compared with those in distilled water (P < 0.05). While, no significant differences in surface hardness after immersion in the AgBr-NP@CTMAB (P > 0.05). The result of flexural strength suggested that there was no statistically significant difference (P < 0.05) between AgBr-NP@CTMAB as well as Polident and water. Conclusion: AgBrNP@CTMAB can efficiently inhibit the growth of plankton S.mutans and biofilm formation, without affecting the flexural strength, microhardness, or surface roughness of PMMA. Therefore, AgBrNP@CTMAB holds promise as a new denture cleaning agent.

Bioproduction of Rare d-Allulose from d-Glucose via Borate-Assisted Isomerization.

d-Allulose is a low-calorie functional rare sugar with excellent processing suitability and unique physiological efficacy. d-Allulose is primarily produced from d-fructose through enzymatic epimerization, facing the constraints of a low conversion yield and high production cost. In this study, a double-enzyme cascade system with tetraborate-assisted isomerization was constructed for the efficient production of d-allulose from inexpensive d-glucose. With the introduction of sodium tetraborate (STB), capable of forming complexes with diol-bearing sugars, the conversion yield of d-allulose from d-glucose substantially escalated from the initial 17.37% to 44.97%. Furthermore, d-allulose was found to exhibit the most pronounced binding affinity for STB with an association constant of 1980.51 M-1, notably surpassing that of d-fructose (183.31 M-1) and d-glucose (35.37 M-1). Additionally, the structural analysis of the sugar-STB complexes demonstrated that d-allulose reacted with STB via the cis 2,3-hydroxyl groups in the α-furanose form. Finally, the mechanism underlying STB-assisted isomerization was proposed, emphasizing the preferential formation of an allulose-STB complex that effectively shifts the isomerization equilibrium to the allulose side, thereby resulting in high yield of d-allulose. Such an STB-facilitated isomerization system would also provide a guidance for the cost-effective synthesis of other rare sugars.

Facile preparation of self-healing hydrogels based on chitosan and PVA with the incorporation of curcumin-loaded micelles for wound dressings.

The increased demand for improved strategies for wound healing has, in recent years, motivated the development of multifunctional hydrogels with favorable bio-compatibility and antibacterial properties. To this regard, the current study presented the design of a novel self-healing composite hydrogel that could perform as wound dressing for the promotion of wound healing. The composite hydrogels were composed of polyvinyl alcohol (PVA), borax and chitosan functionalized with sialic acid (SA-CS) and curcumin loaded pluronic F127 micelles. The hydrogels were formed through the boronic ester bond formation between PVA, SA-CS and borax under physiological conditions and demonstrated adjustable mechanical properties, gelation kinetics and antibacterial properties. When incubating with NIH3T3 cells, the hydrogels also demonstrated good biocompatibility. These aspects offer a promising foundation for their prospective applications in developing clinical materials for wound healing.

Dual optical detection approach for capillary electrophoresis following two-step liquid-liquid extraction to determine ten phenols in water samples.

In this research, the analytical method was developed and evaluated for determining phenol and its nine derivatives belong to the US EPA priority pollutant list in water samples by using dual-channeled capillary electrophoresis (CE) coupled with two types of optical detectors, namely LED-induced fluorescence (LEDIF) and ultraviolet (UV) detectors. The optimal background electrolytes for the first and second CE channels were 20 mM borate (pH 9.80) with 400 µM fluorescein and 55 mM borate (pH 11.75), respectively. The two-step liquid-liquid extraction (LLE) was used for sample preparation and enrichment, in which phenol and its derivatives were extracted from the aqueous phase using 10 mL of n-hexane/1-octanol (60/40, v/v) and then were back extracted into a 0.1 M NaOH as a final acceptor phase. Under the optimal CE and two-step LLE conditions, the enrichment factors of 10 phenols were 184 - 1120-fold, and the method detection limits were lowered to 0.02-0.60 µg/L. The obtained intra-day and inter-day precisions in terms of relative standard deviations (RSD) were between 4.0 and 7.3 % and 6.7 and 14 %, respectively. This approach was used to determine phenols in water samples, with recoveries ranging from 82.0 to 108.9 %. In combination with sample enrichment by two-step LLE extraction, this is the first CE study conducted to determine phenols in the EPA list using two detector approaches, specifically CE-LEDIF/CE-UV.

Molluscicidal activity of calcium borate nanoparticles with kodom ball-flower structure on hematological, histological and biochemical parameters of Eobania vermiculata snails.

Land snails are the most harmful pests in agricultural fields. Eobania vermiculata is a widespread snail species that causes massive damage to all agricultural crops. Thus, the molluscicidal activity of calcium borate nanoparticles (CB-NPs) against Eobania vermiculata was evaluated and compared with metaldehyde (Gastrotox® E 5% G). The amorphous phase of CB-NPs was obtained after thermal treatment at a low temperature (500 °C) which conformed by X-ray diffraction (XRD) analysis. CB-NPs are composed of aggregated nano-sheets with an average thickness of 54 nm which enhanced their molluscicidal activity. These nano-sheets displayed meso-porous network architecture with pore diameters of 13.65 nm, and a 9.46 m2/g specific surface area. CB-NPs and metaldehyde (Gastrotox® E 5% G) exhibited molluscicidal effects on Eobania vermiculata snails with median lethal concentrations LC50 of 175.3 and 60.5 mg/l, respectively, after 72 h of exposure. The results also showed significant reductions of Eobania vermiculata snails hemocytes' mean total number, the levels of Testosterone (T) and Estrogen (E), alkaline phosphatase, acid phosphatase, albumin, and protein concentrations, succinate dehydrogenase, glucose, triglycerides and phospholipids levels, while significant increases in the phagocytic index and mortality index, both transaminases (ALT and AST) and glycogen phosphorylase concentration were observed after the exposure to LC50 of CB-NPs or metaldehyde (Gastrotox® E 5% G) compared to the control group. Therefore, CB-NPs could be used as an alternative molluscicide for controlling Eobania vermiculata, but further studies are needed to assess their effects on non-target organisms.

Hexose phosphorylation for a non-enzymatic glycolysis and pentose phosphate pathway on early Earth.

Glycolysis and pentose phosphate pathways play essential roles in cellular processes and are assumed to be among the most ancient metabolic pathways. Non-enzymatic metabolism-like reactions might have occurred on the prebiotic Earth and been inherited by the biological reactions. Previous research has identified a part of the non-enzymatic glycolysis and the non-enzymatic pentose phosphate pathway from glucose 6-phosphate and 6-phosphogluconate, which are intermediates of these reactions. However, how these phosphorylated molecules were formed on the prebiotic Earth remains unclear. Herein, we demonstrate the synthesis of glucose and gluconate from simple aldehydes in alkaline solutions and the formation of glucose 6-phosphate and 6-phosphogluconate with borate using thermal evaporation. These results imply that the initial stages of glycolysis-like and pentose phosphate pathway-like reactions were achieved in borate-rich evaporative environments on prebiotic Earth, suggesting that non-enzymatic metabolism provided biomolecules and their precursors on prebiotic Earth.

Promoting In Vivo NIR-II Fluorescent Imaging for Lipid in Lipid Metabolism Diseases Diagnosis.

Lipid metabolism diseases have become a tremendous risk worldwide, along with the development of productivity and particular attention to public health. It has been an urgent necessity to exploit reliable imaging strategies for lipids and thus to monitor fatty liver diseases. Herein, by converting the NIR-I signal to the NIR-II signal with IR1061 for the monitoring of lipid, the in vivo imaging of fatty liver disease was promoted on the contrast and visual effect. The main advantages of the imaging promotion in this work included a long emission wavelength, rapid response, and high signal-background-ratio (SBR) value. After promoting the NIR-I signal to NIR-II signal, IR1061 achieved higher SBR value and exhibited a dose-dependent fluorescence intensity at 1100 nm along with the increase of the EtOH proportion as well as steady and selective optical responses toward liposomes. IR1061 was further applied in the in vivo imaging of lipid in fatty liver diseases. In spite of the differences in body weight gain and TC level between healthy mice and fatty liver diseases two models, IR1061 achieved high-resolution imaging in the liver region to monitor the fatty liver disease status. This work might be informatic for the clinical diagnosis and therapeutical treatments of fatty liver diseases.

Optimizing bioconversion processes of rice husk into value-added products: D-psicose, bioethanol, and lactic acid.

Rice husk, rich carbon content, is an agricultural waste produced globally at an amount of 120 million tons annually, and it has high potential as a biorefinery feedstock. Herein, we investigated the feasibility of producing various products as D-psicose, bioethanol and lactic acid from rice husk (RH) through a biorefinery process. Alkali-hydrogen peroxide-acetic acid pretreatment of RH effectively removed lignin and silica, resulting in enzymatic hydrolysis yield of approximately 86.3% under optimal hydrolysis conditions. By using xylose isomerase as well as D-psicose-3-epimerase with borate, glucose present in the RH hydrolysate was converted into D-psicose with a 40.6% conversion yield in the presence of borate. Furthermore, bioethanol (85.4%) and lactic acid (92.5%) were successfully produced from the RH hydrolysate. This study confirmed the high potential of RH as a biorefinery feedstock, and it is expected that various platform chemicals and value-added products can be produced using RH.

11B NMR of the Morphological Evolution of Traditional Chinese Medicine Borax.

This article applies nuclear magnetic resonance technology to the study of boron-containing traditional Chinese medicine, in order to explore the morphological evolution of boron elements in traditional Chinese medicine. Borax is a traditional Chinese medicine with anti-corrosion, anti-inflammatory, antibacterial, and anticonvulsant effects. It is made by boiling, removing stones, and drying borax minerals like borate salts. This article introduces an 11B nuclear magnetic resonance method for identifying and characterizing boron-containing compounds in TCM. We applied this technology to borax aqueous solutions in different chemical environments and found that with boron mixed in the form of SP2 hybridization in equilateral triangles and SP3 hybridization in equilateral tetrahedra, the pH changes in alkaline environments significantly affected the ratio of the two. At the same time, it was found that in addition to the raw material peak, boron signals of other boron-containing compounds were also detected in 20 commercially available boron-containing TCM preparations. These new boron-containing compounds may be true pharmaceutical active ingredients, and adding them directly to the formula can improve quality and safety. This article describes the detection of 11B NMR in boron-containing traditional Chinese medicine preparations. It is simple, non-destructive, and can provide chemical fingerprint studies for boron-containing traditional Chinese medicine.

Sodium Pentaborate Prevents Acetaminophen-Induced Hepatorenal Injury by Suppressing Oxidative Stress, Lipid Peroxidation, Apoptosis, and Inflammatory Cytokines in Rats.

Acetaminophen (N-acetyl-p-aminophenol, APAP, or paracetamol) is one of the drugs that may be damaging to the kidneys and liver when used in excess. In this context, it is vital to treat these side effects on the liver and kidneys with various antioxidants. Diseases have been treated using herbal and mineral remedies since ancient times. The mineral boron, found in rocks and water, is a crucial ingredient with multiple positive biological effects. The primary objective of this research is to determine whether or not boron has a protective effect against the toxicity generated by APAP in rats. Male Sprague-Dawley rats were pretreated orally with boron-source sodium pentaborate (B50 and B100 mg/kg) for 6 days by gastric gavage in order to counteract the toxicity caused by a single dose of APAP (1g/kg). APAP increased lipid peroxidation as well as serum BUN, creatinine concentrations, and serum activities of AST, ALP, and ALT by consuming GSH in liver and kidney tissues. In addition, the activity of antioxidative enzymes, including SOD, CAT, and GPx, was diminished. Inflammatory indicators such as TNF-α, IL-1ß, and IL-33 were elevated in conjunction with APAP toxicity. In kidney and liver tissues, APAP dramatically increased the activity of caspase-3 and triggered apoptosis. Sodium pentaborate therapy on a short-term basis reduced biochemical levels despite these effects of APAP. This study showed that boron protects rats from the harmful effects of APAP by acting as an anti-inflammatory, antioxidant, and anti-apoptotic agent.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction.

OBJECTIVES: Apatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO4³â») and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate. METHODS: Nano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis. RESULTS: A 2D 1H-31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site. SIGNIFICANCE: The F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Antibacterial Activity of Boron Compounds Against Biofilm-Forming Pathogens.

This study aimed to evaluate the antibacterial activity of nine boron derivatives against biofilm-forming pathogenic bacteria. The effect of boron derivatives (CMB, calcium metaborate; SMTB, sodium metaborate tetrahydrate; ZB, zinc borate; STFB, sodium tetra fluorine borate; STB, sodium tetraborate; PTFB, potassium tetra fluor borate; APTB, ammonium pentabo-rate tetrahydrate; SPM, sodium perborate monohydrate; Borax, ATFB, ammonium tetra fluorine borate) on bacteria isolated from blood culture was determined by the minimum inhibitory concentration (MIC) method. Then, biofilm formation potentials on microplates, tubes, and Congo red agar were examined. The cytotoxicity of boron derivatives was determined by using WST-1-based methods. The interaction between the biofilm-forming bacteria, fibroblast cells, and boron derivatives was determined with the infection model. We found that the sodium metaborate tetrahydrate molecule was effective against all pathogens. According to the optical density values detected at 630 nm in microplates, meticillin-resistant Staphylococcus aureus was observed to have the most substantial biofilm ability at 0.257 nm. As a result of cytotoxicity studies, it has been determined that a 1 µg/L concentration of boron derivatives is not toxic to fibroblast L929 cells. In cell culture experiments, these boron derivatives have very serious inhibitory activity against biofilm-forming pathogens in a short treatment period, such as 2-4 h. Furthermore, using these molecules on inanimate surfaces affected by biofilms would be appropriate instead of living cells.

Enhancing near-infrared fluorescence intensity and stability of PLGA-b-PEG micelles by introducing Gd-DOTA at the core boundary.

Micelles have been extensively used in biomedicine as potential carriers of hydrophobic fluorescent dyes. Their small diameters can potentially enable them to evade recognition by the reticuloendothelial system, resulting in prolonged circulation. Nevertheless, their lack of stability in physiological environments limits the imaging utility of micelles. In particular, when a dye sensitive to water, such as IR-1061, is encapsulated in the micelle core, the destabilized structure leads to interactions between water and dye, degrading the fluorescence. In this study, we investigated a method to improve micelle stability utilizing the electrical effect of gadolinium (Gd3+ ) and tetraazacyclododecane tetraacetic acid (DOTA), introduced into the micelles. Three micellar structures, one containing a poly(lactic-co-glycolic acid)-block-poly(ethylene glycol) (PLGA-b-PEG) block copolymer, and two other structures, including PLGA-b-PEG with DOTA or Gd-DOTA introduced at the boundary of PLGA and PEG, were prepared with IR-1061 in the core. Structures that contained DOTA at the border of the PLGA core and PEG shell exhibited much higher fluorescence intensity than probes without DOTA. With Gd3+ ions at the DOTA center, fluorescence stability was enhanced remarkably in physiological environments. Most interesting is the finding that fluorescence is enhanced with increased Gd-DOTA concentrations. In conclusion, we found that overall fluorescence and stability are improved by introducing Gd-DOTA at the boundary of the PLGA core and PEG shell. Improving micelle stability is crucial for further biomedical applications of micellar probes such as bimodal fluorescence and magnetic resonance imaging.