Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 38.827
Filtrar
1.
ACS Nano ; 18(11): 8168-8179, 2024 Mar 19.
Artigo em Inglês | MEDLINE | ID: mdl-38437515

RESUMO

Advancements in cell coculture systems with porous membranes have facilitated the simulation of human-like in vitro microenvironments for diverse biomedical applications. However, conventional Transwell membranes face limitations in low porosity (ca. 6%) and optical opacity due to their large thickness (ca. 10 µm). In this study, we demonstrated a one-step, large-scale fabrication of freestanding polymer ultrathin porous (PUP) membranes with thicknesses of hundreds of nanometers. PUP membranes were produced by using a gap-controlled bar-coating process combined with polymer blend phase separation. They are 20 times thinner than Transwell membranes, possessing 3-fold higher porosity and exhibiting high transparency. These membranes demonstrate outstanding molecular permeability and significantly reduce the cell-cell distance, thereby facilitating efficient signal exchange pathways between cells. This research enables the establishment of a cutting-edge in vitro cell coculture system, enhancing optical transparency, and streamlining the large-scale manufacturing of porous membranes.


Assuntos
Membranas Artificiais , Polímeros , Humanos , Técnicas de Cocultura , Porosidade
2.
Environ Sci Technol ; 58(11): 5174-5185, 2024 Mar 19.
Artigo em Inglês | MEDLINE | ID: mdl-38451543

RESUMO

Nanofiltration (NF) has the potential to achieve precise ion-ion separation at the subnanometer scale, which is necessary for resource recovery and a circular water economy. Fabricating NF membranes for selective ion separation is highly desirable but represents a substantial technical challenge. Dipole-dipole interaction is a mechanism of intermolecular attractions between polar molecules with a dipole moment due to uneven charge distribution, but such an interaction has not been leveraged to tune membrane structure and selectivity. Herein, we propose a novel strategy to achieve tunable surface charge of polyamide membrane by introducing polar solvent with a large dipole moment during interfacial polymerization, in which the dipole-dipole interaction with acyl chloride groups of trimesoyl chloride (TMC) can successfully intervene in the amidation reaction to alter the density of surface carboxyl groups in the polyamide selective layer. As a result, the prepared positively charged (PEI-TMC)-NH2 and negatively charged (PEI-TMC)-COOH composite membranes, which show similarly high water permeance, demonstrate highly selective separations of cations and anions in engineering applications, respectively. Our findings, for the first time, confirm that solvent-induced dipole-dipole interactions are able to alter the charge type and density of polyamide membranes and achieve tunable surface charge for selective and efficient ion separation.


Assuntos
Cloretos , Nylons , Cloretos/química , Nylons/química , Membranas Artificiais , Solventes , Água
3.
Anal Chim Acta ; 1300: 342461, 2024 Apr 29.
Artigo em Inglês | MEDLINE | ID: mdl-38521571

RESUMO

BACKGROUND: A new design of a flow-through coaxial electromembrane extraction (EME) probe that can be on-line coupled with CE instrument is described and tested. The supporting base of the probe is a PDMS microchip with T-shaped channels into which two coaxially arranged capillaries for inlet and outlet solutions are inserted. The extraction part of the probe is a porous polypropylene hollow fiber, sealed at one end and modified with nitrophenyloctyl ether (NPOE) extraction fluid. The internal volume of the extraction probe is 1.1 µL. RESULTS: The EME probe was tested on laboratory samples and methadone was extracted into 3.0 M AcOH as acceptor. The concentration dependence was linear in the range of 0.1-1.0 µg mL-1 at EME 300 s/150 V and in the range of 0.5-10.0 µg mL-1 at EME 100 s/150 V. The enrichment factor was greater than 30 and the LOD was 0.21 µg mL-1. The EME of methadone in clinical samples showed a linear concentration dependence in human urine and a nonlinear concentration dependence in serum. The distribution of methadone in each phase of the extraction system and the effect of extraction membrane thickness on the enrichment factor were studied. The EME probe can be applied repeatedly. SIGNIFICANCE: The supporting base of EME probe and flow gating interface (FGI) are realized by a microfluidic PDMS microchips cast in the laboratory without the use of lithography. A supporting PDMS chip with coaxially arranged capillaries and extraction membrane forms a compact analytical instrument. The entire EME/CE analysis process is performed on a laboratory-made instrument and automated by LabView.


Assuntos
Eletroforese Capilar , Metadona , Humanos , Eletroforese Capilar/métodos , Membranas Artificiais
4.
J Contemp Dent Pract ; 25(2): 160-167, 2024 Feb 01.
Artigo em Inglês | MEDLINE | ID: mdl-38514414

RESUMO

AIM: Amnion and chorion membranes possess unique inherited biological properties that enhance wound healing and may accelerate periodontal regeneration. The present study aims to evaluate and compare the efficacy of amnion and chorion membranes in the treatment of furcation defects. MATERIALS AND METHODS: A total of 20 patients were selected and were randomly allocated to group I and group II with 10 subjects in each group. Amnion and chorion membranes are placental-derived membranes that accelerate regeneration by having natural growth factors with their antimicrobial and inflammation reduction properties. Group I was treated using bone grafting with decalcified freeze-dried bone allograft (DFDBA) and placement of amnion as a membrane for guided tissue regeneration (GTR) whereas group II was treated using bone grafting with DFDBA and placement of chorion as a membrane for GTR. The patients were followed for clinical and radiographic parameters and were evaluated between 3 and 6 months after surgery. RESULT: In intragroup comparison, a significant difference was evident in both the groups for all the clinical and radiographic parameters within the groups. (p = 0.01) This means both amnion and chorion membranes showed statistically significant regenerative efficacy. In intergroup comparison, the results show that all the clinical parameters and radiographic parameters show no significant difference between the groups. CONCLUSION: The amnion and chorion membranes had similar regenerative efficacy in combination with DFDBA in patients with buccal degree II furcation defects in mandibular molars. CLINICAL SIGNIFICANCE: The amnion and chorion membranes have shown significant improvement in clinical and radiographic parameters when used for the treatment of buccal degree II furcation defects in mandibular molars. How to cite this article: Mallapragda S, Gupta R, Gupta S, et al. Evaluation of Regenerative Efficacy of Amnion and Chorion Membrane in Treatment of Mandibular Molar Furcation Defects: A Clinico-radiographic Study. J Contemp Dent Pract 2024;25(2):160-167.


Assuntos
Defeitos da Furca , Gravidez , Humanos , Feminino , Defeitos da Furca/cirurgia , Âmnio/transplante , Regeneração Tecidual Guiada Periodontal/métodos , Placenta/cirurgia , Dente Molar/cirurgia , Transplante Ósseo/métodos , Córion/cirurgia , Membranas Artificiais
5.
Water Res ; 252: 121251, 2024 Mar 15.
Artigo em Inglês | MEDLINE | ID: mdl-38324983

RESUMO

Nanofiltration (NF) membranes play a pivotal role in water treatment; however, the persistent challenge of membrane fouling hampers their stable application. This study introduces a novel approach to address this issue through the creation of a poly(3,4-ethylenedioxythiophene) (PEDOT)-based conductive membrane, achieved by synergistically coupling interfacial polymerization (IP) with in situ self-polymerization of EDOT. During the IP reaction, the concurrent generation of HCl triggers the protonation of EDOT, activating its self-polymerization into PEDOT. This interwoven structure integrates with the polyamide network to establish a stable selective layer, yielding a remarkable 90 % increase in permeability to 20.4 L m-2 h-1 bar-1. Leveraging the conductivity conferred by PEDOT doping, an electro-assisted cleaning strategy is devised, rapidly restoring the flux to 98.3 % within 5 min, outperforming the 30-minute pure water cleaning approach. Through simulations in an 8040 spiral-wound module and the utilization of the permeated salt solution for cleaning, the electro-assisted cleaning strategy emerges as an eco-friendly solution, significantly reducing water consumption and incurring only a marginal electricity cost of 0.055 $ per day. This work presents an innovative avenue for constructing conductive membranes and introduces an efficient and cost-effective electro-assisted cleaning strategy to effectively combat membrane fouling.


Assuntos
Membranas Artificiais , Compostos Orgânicos , Polimerização , Permeabilidade , Condutividade Elétrica
6.
J Mater Chem B ; 12(9): 2364-2372, 2024 Feb 28.
Artigo em Inglês | MEDLINE | ID: mdl-38345129

RESUMO

The introduction of carbonic anhydrase (CA) onto an extracorporeal membrane oxygenation (ECMO) membrane can improve the permeability of carbon dioxide (CO2). However, existing CA-grafting methods have limitations, and the hemocompatibility of current substrate membranes of commercial ECMO is not satisfactory. In this study, a 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC)/N-hydroxy succinimide (NHS) activation method is adopted to graft CA with CO2-catalyzed conversion activity onto a polyethersulfone (PES) membrane, which is prepared by a phase inversion technique after in situ crosslinking polymerization of 1-vinyl-2-pyrrolidone (VP) and acrylic acid (AA) in PES solution. The characterization results reveal that CA has been grafted onto the modified PES membrane successfully and exhibits catalytic activity. The kinetic parameters of esterase activity verify that the grafted amount of active CA increases with an increase in the concentration of the CA incubation solution. The CA-grafted membrane (CA-M) can accelerate the conversion of bicarbonate to CO2 in water and blood, which demonstrates the special catalytic activity towards bicarbonate of CA. Finally, blood compatibility tests prove that the CA-M does not lead to hemolysis, shows suppressed protein adsorption and increased coagulation time, and is suitable for application in ECMO. This work demonstrates a green and efficient method for preparing bioactive materials and has practical guiding significance for subsequent pulmonary membrane research and ECMO applications.


Assuntos
Anidrases Carbônicas , Polímeros , Sulfonas , Anidrases Carbônicas/metabolismo , Dióxido de Carbono , Bicarbonatos , Membranas Artificiais , Pulmão/metabolismo
7.
Bioresour Technol ; 396: 130455, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38360221

RESUMO

Nanobubble (NB) represents a promising practice for mitigating fouling in biogas slurry distribution systems. However, its anti-fouling effectiveness and optimal use dosage are unknown. This study investigated the NB anti-fouling capacity at six concentrations (0 %-100 %, denoting the ratio of maximum NB-infused water; particle concentrations in 0 % and 100 % ratios were 1.08 × 107 and 1.19 × 109 particles mL-1, respectively). Results showed that NB effectively mitigated multiple fouling at 50 %-100 % ratios, whereas low NB concentration exacerbated fouling. NB functioned both as an activator and a bactericide for microorganisms, significantly promoting biofouling at 5 %-25 %, and inhibiting biofouling at 50 %-100 %. Owing to an enhanced biofilm biomineralization ability, low NB concentration aggravated precipitate fouling, whereas high NB doses effectively mitigated precipitates. Additionally, higher NB concentrations demonstrated superior control efficiency against particulate fouling. This study contributes insights into NB effectiveness in controlling various fouling types within wastewater distribution systems.


Assuntos
Incrustação Biológica , Purificação da Água , Águas Residuárias , Biocombustíveis , Purificação da Água/métodos , Incrustação Biológica/prevenção & controle , Biofilmes , Membranas Artificiais
8.
Water Sci Technol ; 89(4): 904-914, 2024 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-38423608

RESUMO

In this study, polyoxometalates (POMs) as a core-modifying material was used to fabricate the nanofiltration (NF) membrane on the polyvinylidene fluoride (PVDF) microfiltration membrane substrate via a novel interfacial polymerization (IP) method. The formation mechanism of the POMs-modified composite membrane was proposed. The separation and antifouling properties were further investigated. After cross-linking with POMs through the new IP reaction, the modified composite membrane showed improved hydrophilicity, water flux, and salt rejection. In the humic acid fouling experiment, the POMs-modified membrane exhibited the best antifouling performance, with a flux recovery rate of up to 91.3%. Electrochemical impedance spectroscopy was further used to investigate the antifouling performance of the membranes. Nyquist and Bode plots of the POMs-modified membranes showed no significant change before and after fouling compared to the PVDF membrane substrate, indicating reduced fouling attachment on the modified membrane, which was consistent with the fouling index and flux variation observed during the fouling experiment. Our findings provide a simple and valuable route for fabricating POMs-functionalized NF membranes with desirable separation and antifouling performance.


Assuntos
Ânions , Incrustação Biológica , Polieletrólitos , Polivinil , Incrustação Biológica/prevenção & controle , Espectroscopia Dielétrica , Polímeros de Fluorcarboneto , Membranas Artificiais
9.
Food Res Int ; 178: 113939, 2024 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-38309867

RESUMO

A substantial amount of water is being used during Clean-in-Place (CIP) operation, and is transformed into wastewater that can cause eutrophication to the nearby ecosystem. The present study proposed the Nanofiltration (NF) - Forward Osmosis (FO) - Direct Contact Membrane Distillation (DCMD) to recover the cleaning agents and reclaim freshwater from the model CIP wastewater. NF steps were suggested as prefiltration steps to remove organic compounds from the CIP wastewater. NF steps reduced the lactose and protein contents by 100 % and 95.6 %, respectively. The permeates from NF steps were further managed by the integrated FO-DCMD system. Several draw salts such as NaCl, KCl, MgCl2, and CaCl2 were compared to investigate the influence on FO and DCMD performance. It was found that monovalent salts (NaCl and KCl) outperformed the divalent salts (MgCl2 and CaCl2) in terms of water flux for both FO and DCMD. This can be attributed to the lower viscosity and higher mass transfer coefficient. In addition, the replenishment costs of each salt were evaluated since salts loss occurred during FO and DCMD operation. The cost evaluation revealed that NaCl is most the cheapest salts per reclaimed water. All of this observation indicates that NaCl is preferred in terms of water flux and replenishment cost. The NF permeate kept concentrated using the integrated FO-DCMD or single FO with 2 M of NaCl. Compared to a single FO that showed a consistent decline in draw solution concentration, FO-DCMD could maintain the concentration of the draw solution. Despite the constant concentration, flux decline of FO was observed due to fouling formation caused by the high-temperature operation. However, the FO-DCMD could accomplish the recovery of pure water. Finally, the cleaning agents recovered by the NF-FO-DCMD showed the cleaning efficacy comparable to the fresh NaOH. These results suggest the potential of the proposed system to manage the CIP wastewater.


Assuntos
Águas Residuárias , Purificação da Água , Cloreto de Sódio , Sais , Destilação/métodos , Cloreto de Cálcio , Ecossistema , Membranas Artificiais , Purificação da Água/métodos , Cloreto de Sódio na Dieta , Água , Osmose
10.
Sci Total Environ ; 920: 171124, 2024 Apr 10.
Artigo em Inglês | MEDLINE | ID: mdl-38382609

RESUMO

While microalgal-bacterial membrane bioreactors (microalgal-bacterial MBRs) have risen as an important technique in the realm of sustainable wastewater treatment, the membrane fouling caused by free microalgae is still a significant challenge to cost-effective operation of the microalgal-bacterial MBRs. Addressing this imperative, the current study investigated the influence of magnesium ion (Mg2+) addition on the biological dynamics and membrane fouling characteristics of the laboratory-scale submerged microalgal-bacterial MBRs. The results showed that Mg2+, important in augmenting photosynthetic process, yielded a biomass concentration of 2.92 ± 0.06 g/L and chlorophyll-a/MLSS (mixed liquor suspended solids) of 33.95 ± 1.44 mg/g in the RMg (Mg2+ addition test group). Such augmentation culminated in elevated total nitrogen and phosphorus removal efficiencies, clocking 81.73 % and 80.98 % respectively in RMg. Remarkably, despite the enhanced microalgae activity and concentration in RMg, the TMP growth rate declined by a significant 46.8 % compared to R0. Detailed characterizations attributed reduced membrane fouling of RMg to a synergy of enlarged floc size and reduced EPS contents. This transformation is intrinsically linked to the bridging action of Mg2+ and its role in creating a non-stressed ecological environment for the microalgal-bacterial MBR. In conclusion, the addition of Mg2+ in the microalgal-bacterial MBR appears an efficient approach, improving the efficiency of pollutant treatment and mitigating fouling, which potentially revolutionizes cost-effective applications and propels the broader acceptance of microalgal-bacterial MBRs. It also of great importance to promote the development and application of microalgal-bacterial wastewater treatment technology.


Assuntos
Incrustação Biológica , Microalgas , Águas Residuárias , Incrustação Biológica/prevenção & controle , Membranas Artificiais , Reatores Biológicos/microbiologia , Bactérias , Esgotos
11.
Environ Pollut ; 345: 123423, 2024 Mar 15.
Artigo em Inglês | MEDLINE | ID: mdl-38307242

RESUMO

The surface water in coastal areas involving algae, is often affected by saline and emerging contaminants caused by saltwater intrusion, and expanding aquaculture industry. Therefore, it is necessary to conduct studies to address the issues that affect ecological safety and health of aquatic environments. This study presents the development of an enhanced electrooxidation/electrocoagulation-ultrafiltration (EO/EC-UF) membrane process using S2O42- (DTN@EO/EC-UF) for the treatment of saline water containing algae. Our results have shown that significant removal of NH3-N (95.1 %), UV254 (89.4 %) and algae (75.7 %) was achieved with the addition of S2O42- (DTN). Additionally, an optimal DTN dosage of 40 mg/L was used in the DTN@EO/EC process to enhance water purification, utilizing reactive species such as SO4·- and ·OH. After coupling with the ultrafiltration (UF) process, optimal operating conditions (DTN: 40 mg/L, current density: 4.65 mA/cm2, electrolysis: 60 s) were applied to treat the saline algae-containing surface water. The generated free chlorine, including NHCl2, accounted for approximately 22 % (0.14 mg/L). In addition, DTN significantly improved the ceramic membrane's permeability and anti-fouling characteristics, with a maximum increasing specific flux from 0.76 to 0.93, mainly attributing to the reduced the irreversible fouling resistance. Furthermore, we discovered that common membrane cleaning using acid or base enhanced the DTN@EO/EC-UF process. In conclusion, this study established an innovative DTN@EO/EC-UF process with excellent performance in terms of water purification and membrane self-cleaning. The results provided a promising alternative for treating saline algae-containing surface water.


Assuntos
Racepinefrina , Sulfatos , Purificação da Água , Eletrocoagulação , Membranas Artificiais , Permeabilidade , Ultrafiltração , Purificação da Água/métodos , Oxirredução
12.
Bioorg Chem ; 145: 107220, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38387401

RESUMO

In this study, we explored the potential of the photoremovable o-nitrobenzyl (oNB) group as a tool to manipulate the membrane permeability and regulate the conformation of linear peptides by means of experimental and computational studies. We found that the introduction of one or more oNB groups markedly increased the permeability and altered the conformation, as compared to the corresponding unmodified peptides. We thoroughly investigated the impact of peptide length, number of oNB group, oNB insertion position, and introduction of N- and C-terminal protecting groups on the passive membrane permeability by means of parallel artificial membrane permeability assay (PAMPA). Photoreaction of peptides containing one or two oNB groups proceeded cleanly in moderate to high yields, releasing the unprotected parent linear peptide. The oNB-modified peptides showed a cis/trans conformational equilibrium, while after photolysis, the unprotected linear peptides showed only the trans-amide conformation. Furthermore, a comprehensive comparison of oNB-modified peptides and N-methylated peptides was conducted, encompassing conformational analysis and physicochemical properties. N-Substituted peptides favored a folded-like structure, which may contribute to the improvement in permeability.


Assuntos
Membranas Artificiais , Peptídeos , Peptídeos/química , Permeabilidade da Membrana Celular , Conformação Molecular , Permeabilidade
13.
Water Res ; 253: 121268, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38340700

RESUMO

The release of nanoplastics (NPs) into the environment is growing due to the extensive use of plastic products. Numerous studies have confirmed the negative effects of NPs on microorganisms, which poses uncertainties concerning their impact on nanofiltration (NF) membrane biofouling. This study investigated the initial cell adhesion process, NF membrane biofouling kinetic processes and bacterial responses of Pseudomonas aeruginosa (P. aeruginosa) exposed to varied NPs concentrations (0-50 mg·L-1). Transcriptome analysis demonstrated that low concentration of NPs (0.1 mg·L-1) promoted bacterial quorum sensing, energy metabolism, exopolysaccharide biosynthesis and bacterial secretion systems. Correspondingly, the polysaccharide content increased remarkably to 2.77 times the unexposed control, which served as a protective barrier for bacteria to avoid the impact of NPs-induced stress. Suppressed homologous recombination, microbial metabolic potentials and flagellar assembly were detected in bacteria exposed to a high concentration (50 mg·L-1) of NPs, mainly due to the triggered reactive oxygen species (ROS) generation, genomic DNA damage, and decreased energy production. Overall, enhanced formation of the extracellular polymeric substances (EPS) and aggravated membrane flux decline were observed when NPs interacted with the membrane surface by cell secretions (low NPs levels) or cell lysis (high NPs levels). These findings shed light on understanding the microbial metabolism mechanism and membrane biofouling propensity with NPs stress at both the molecular and gene levels.


Assuntos
Incrustação Biológica , Microplásticos , Membranas Artificiais , Percepção de Quorum , Bactérias , Biofilmes
14.
Water Res ; 253: 121282, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38341976

RESUMO

The choice of appropriate biofilm control strategies in membrane systems for seawater desalination pretreatment relies on understanding the properties of the biofilm formed on the membrane. This study reveals how the biofilm composition, including both organic and inorganic, influenced the biofilm behavior under mechanical loading. The investigation was conducted on two Gravity-Driven Membrane reactors employing Microfiltration (MF) and Ultrafiltration (UF) membrane for the pretreatment of raw seawater. After a stabilization period of 20 days (Phase I), a biofilm behavior test was introduced (Phase II) to evaluate (i) biofilm deformation during the absence of permeation (i.e., relaxation) and (ii) biofilm resistance to detachment forces (i.e., air scouring). The in-situ monitoring investigation using Optical Coherence Tomography (OCT) revealed that the biofilms developed on MF and UF membrane presented a rigid structure in absence of filtration forces, limiting the application of relaxation and biofilm expansion necessary for cleaning. Moreover, under shear stress conditions, a higher reduction in biofilm thickness was observed for MF (-60%, from 84 to 34 µm) compared to UF (-30%, from 64 to 45 µm), leading to an increase of permeate flux (+60%, from 9.1 to 14.9 L/m2/h and +20 % from 7.8 to 9.5 L/m2/h, respectively). The rheometric analysis indicated that the biofilm developed on MF membrane had weaker mechanical strength, displaying lower storage modulus (-50 %) and lower loss modulus (-55 %) compared to UF. These differences in mechanical properties were linked to the lower concentration of polyvalent ions and the distribution of organic foulants (i.e., BB, LMW-N) found in the biofilm on the MF membrane. Moreover, in the presence of air scouring led to a slight difference in microbial community between UF and MF. Our findings provide valuable insight for future investigations aimed at engineer biofilm composition to optimize biofilm control strategies in membrane systems for seawater desalination pretreatment.


Assuntos
Ultrafiltração , Purificação da Água , Ultrafiltração/métodos , Membranas Artificiais , Filtração/métodos , Biofilmes , Água do Mar/química , Purificação da Água/métodos , Osmose
15.
Water Res ; 253: 121263, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38341977

RESUMO

Ultralow-pressurized ultrafiltration membrane process with low energy consumption is promising in surface water purification. However, membrane fouling and low selectivity are significant barriers for the wide application of this process. Herein, an ultrathin zwitterionic hydrogel nanolayer was in-situ grown on polysulfone ultrafiltration membrane surface through interfacially-initiated free radical polymerization. The hydrogel-modified membrane possessed improved biological fouling resistance during the dynamic filtration process (bovine serum albumin, Escherichia coli and Staphylococcus aureus), comparing with commercial polysulfone membrane. The enhanced biofouling resistance ability of zwitterionic hydrogel nanolayer was derived from the foulant repulsion of hydration shell and the bactericidal effect of quaternary ammonium, according to the results of foulant-membrane interaction energy analyses and antibacterial performances. In surface water treatment, the zwitterionic hydrogel layer inhibited biofouling and resulted in the formation of a loose and thin biofilm. In addition, the hydrogel-modified membrane possessed 22% improvement in dissolved organic carbon (DOC) removal and 134% increasement in stable water flux, compared to commercial polysulfone membrane. The in-situ grown zwitterionic hydrogel nanolayer on membrane surface offers a prospectively alternative for biofouling control in ultralow-pressurized membrane process.


Assuntos
Incrustação Biológica , Polímeros , Sulfonas , Purificação da Água , Incrustação Biológica/prevenção & controle , Ultrafiltração/métodos , Hidrogéis , Membranas Artificiais , Purificação da Água/métodos
16.
Water Res ; 253: 121281, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38364461

RESUMO

Ultrafiltration (UF) technology is widely used in secondary water supply systems (SWSS) to provide high-quality drinking water. However, the challenge of severe membrane fouling, which leads to frequent cleaning requirements, makes UF maintenance intensive. In this study, we tried to validate the feasibility of achieving zero fouling without the need for cleaning in the UF for SWSS, i.e., the fouling resistance can be maintained for a very long time without any increase. We operated dead-end UF systems at different fluxes, both with and without residual chlorine, and monitored the formation of fouling layers during filtration. The results demonstrated the successful achievement of zero fouling under a flux of 10 L/(m2 h) in the absence of chlorine, evidenced by no increase in transmembrane pressure for three months. This zero-fouling phenomenon was attributed to the formation of a self-regulating biofouling layer. This biofouling layer could degrade the deposited foulants and featured a loose morphology, facilitated by microbial activities in the cake layer. Although residual chlorine reduced the fouling rate by half at a flux of 30 L/(m2 h), it hindered the achievement of zero fouling at the lower flux of 10 L/(m2 h), due to its inhibitory effect on microbial activity. Intermittent operation of UF was effective in achieving zero fouling at higher fluxes (e.g., 30 L/(m2 h)). This benefit was primarily ascribed to the biodegradation of accumulated foulants and the expansion of biofouling layer during the pause of the intermittent filtration, which prompted the formation of biofouling layers with loose structure and balanced composition. To the best of our knowledge, this study is the first attempt to achieve zero fouling in UF for SWSS, and the findings may offer valuable insights for the development of cleaning-free and low-maintenance membrane processes.


Assuntos
Incrustação Biológica , Água Potável , Purificação da Água , Ultrafiltração/métodos , Cloro , Purificação da Água/métodos , Membranas Artificiais , Incrustação Biológica/prevenção & controle , Halogênios , Cloretos , Abastecimento de Água
17.
Water Res ; 253: 121329, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38387269

RESUMO

Membrane fouling induced by oily substances significantly constrains membrane distillation performance in treating hypersaline oily wastewater. Overcoming this challenge necessitates a heightened fundamental understanding of the oil fouling phenomenon. Herein, the adsorption and penetration mechanism of oil droplets on hydrophobic membranes in membrane distillation process was investigated at the molecular level. Our results demonstrated that the adsorption and penetration of oil droplets were divided into four stages, including the free stage, contact stage, spreading stage, and equilibrium stage. Due to the extensive non-polar surface distribution of the polytetrafluoroethylene (PTFE) membrane (comprising 95.41 %), the interaction between oil molecules and PTFE was primarily governed by van der Waals interaction. Continuous oil droplet membrane fouling model revealed that the new oil droplet molecules preferred to penetrate into membrane pores where oil droplets already existed. The penetration of resin (a component of medium-quality oil droplets) onto PTFE membrane pores required the "pre-paving" of light crude oil. Finally, the ΔE quantitative structure-activity relationships (QSAR) models were developed to evaluate the penetration mechanism of pollutant molecules on the PTFE membrane. This research provides new insights for improving sustainable membrane distillation technologies in treating saline oily wastewater.


Assuntos
Águas Residuárias , Purificação da Água , Adsorção , Destilação , Membranas Artificiais , Purificação da Água/métodos , Politetrafluoretileno
18.
J Environ Sci (China) ; 141: 102-128, 2024 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-38408813

RESUMO

Electrochemical filtration can not only enrich low concentrations of pollutants but also produce reactive oxygen species to interact with toxic pollutants with the assistance of a power supply, making it an effective strategy for drinking water purification. In addition, the application of electrochemical filtration facilitates the reduction of pretreatment procedures and the use of chemicals, which has outstanding potential for maximizing process simplicity and reducing operating costs, enabling the production of safe drinking water in smaller installations. In recent years, the research on electrochemical filtration has gradually increased, but there has been a lack of attention on its application in the removal of low concentrations of pollutants from low conductivity water. In this review, membrane substrates and electrocatalysts used to improve the performance of electrochemical membranes are briefly summarized. Meanwhile, the application prospects of emerging single-atom catalysts in electrochemical filtration are also presented. Thereafter, several electrochemical advanced oxidation processes coupled with membrane filtration are described, and the related working mechanisms and their advantages and shortcomings used in drinking water purification are illustrated. Finally, the roles of electrochemical filtration in drinking water purification are presented, and the main problems and future perspectives of electrochemical filtration in the removal of low concentration pollutants are discussed.


Assuntos
Água Potável , Poluentes Químicos da Água , Purificação da Água , Membranas Artificiais , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Filtração/métodos
19.
Langmuir ; 40(9): 4545-4566, 2024 03 05.
Artigo em Inglês | MEDLINE | ID: mdl-38386509

RESUMO

Biomaterials often contain large quantities of water (50-98%), and with the current transition to a more biobased economy, drying these materials will become increasingly important. Contrary to the standard, thermodynamically inefficient chemical and thermal drying methods, dewatering by membrane separation will provide a sustainable and efficient alternative. However, biomaterials can easily foul membrane surfaces, which is detrimental to the performance of current membrane separations. Improving the antifouling properties of such membranes is a key challenge. Other recent research has been dedicated to enhancing the permeate flux and selectivity. In this review, we present a comprehensive overview of the design requirements for and recent advances in dewatering of biomaterials using membranes. These recent developments offer a viable solution to the challenges of fouling and suboptimal performances. We focus on two emerging development strategies, which are the use of electric-field-assisted dewatering and surface functionalizations, in particular with hydrogels. Our overview concludes with a critical mention of the remaining challenges and possible research directions within these subfields.


Assuntos
Eletricidade , Água , Membranas Artificiais , Dessecação/métodos , Materiais Biocompatíveis
20.
Chemosphere ; 352: 141468, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38382717

RESUMO

Considerable advancements have been made in the development of hydrophobic membranes for membrane distillation (MD). Nonetheless, the environmentally responsible disposal of these membranes poses a critical concern due to their synthetic composition. Herein, an eco-friendly dual-layered biopolymer-based membrane was fabricated for water desalination. The membrane was electrospun from two bio-polymeric layers. The top hydrophobic layer comprises polycaprolactone (PCL) and the bottom hydrophilic layer from cellulose acetate (CA). Additionally, silica nanoparticles (SiO2 NPs) were electrosprayed onto the top layer of the dual-layered PCL/CA membrane to enhance the hydrophobicity. The desalination performance of the modified PCL-SiO2/CA membrane was compared with the unmodified PCL/CA membrane using a direct contact membrane distillation (DCMD) unit. Results revealed that silica remarkably improves membrane hydrophobicity. The modified PCL-SiO2/CA membrane demonstrated a significant increase in water contact angle of 152.4° compared to 119° for the unmodified membrane. In addition, PCL-SiO2/CA membrane has a smaller average pore size of 0.23 ± 0.16 µm and an exceptional liquid entry pressure of water (LEPw), which is 3.8 times higher than that of PCL/CA membrane. Moreover, PCL-SiO2/CA membrane achieved a durable permeate flux of 15.6 kg/m2.h, while PCL/CA membrane showed unstable permeate flux decreasing approximately from 25 to 12 kg/m2.h over the DCMD test time. Furthermore, the modified PCL-SiO2/CA membrane achieved a high salt rejection value of 99.97% compared to a low value of 86.2% for the PCL/CA membrane after 24 h continuous DCMD operation. In conclusion, the proposed modified PCL-SiO2/CA dual-layer biopolymeric-based membrane has considerable potential to be used as an environmentally friendly membrane for the MD process.


Assuntos
Membranas Artificiais , Purificação da Água , Dióxido de Silício/química , Purificação da Água/métodos , Interações Hidrofóbicas e Hidrofílicas , Destilação/métodos , Água/química
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...